FACULTY OF MECHANICAL AND MANUFACTURING...

1

FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA PROGRAMMES SPECIFICATION

Programme

Degree of Mechanical Engineering

Award

Bachelor in Mechanical Engineering With Honours

Programme duration Minimum Maximum 8 semesters 12 semesters Admission Requirement The apllicants must fulfill the minimum requirement for this programme, as follows: 1. Sijil Tinggi Persekolahan Malaysia (STPM) holder

Applicants must fullfill the university general requirement and the programme special requirement: a) University General Requirement

Passed Sijil Pelajaran Malaysia (SPM)/equivalent with a credit in Bahasa Melayu/Bahasa Malaysia or a credit in Bahasa Melayu/Bahasa Malaysia July Paper;

and

Passed Sijil Tinggi Persekolahan Malaysia (STPM) with a CGPA of at least 2.00 . Obtained at least Grade C (CGPA 2.00) in these following subjects:

• General Paper

• 2 other subjects and

Obtained at least Band 1 in Malaysian University English Test (MUET) however the candidate is required to achieve at least Band 2 upon graduation

b) Programme Special Requirement

Obtained at least Grade C (CGPA 2.00) at STPM level in these following subjects :

• Mathematics T / Further Mathematics T; • Physics; and • Chemistry

and Passed the SPM English Language.

and

Should have no impaired vision and any physical disabilities that interfere with practical works.

Note: Students must obtain at least Band 2 MUET before graduation.

2


2. Candidates with Diploma / Diploma Equivalent

Applicants must fullfill the university general requirement and the programme special requirement a) University General Requirement

Passed Sijil Pelajaran Malaysia (SPM)/equivalent with a credit in Bahasa Melayu/Bahasa Malaysia or a credit in Bahasa Melayu/Bahasa Malaysia July Paper;

and

Obtained a diploma or other recognised qualifications in the relevant fields recognized by the Malaysian Government and certified by IPTA’s Senate.

and

Obtained at least Band 1 in Malaysian University English Test (MUET).


Obtained a diploma or other recognised qualifications in the relevant fields of engineering and technology with CGPA of 2.70; or 2 years working experience in the relevant fields for candidates with CGPA of 2.50

and

Obtained at least Band 1 for MUET however the candidate is required to get Band 2 upon graduation.

and Passed the SPM English Language

and

Should have no impaired vision and any physical disabilities that interfere with the practical work

Note: Diploma holders are eligible for credit exemption based on the grades of the subjects and fields taken. 3. Candidates from MOE Matriculation

Applicants must fullfill the university general requirement and the programme special requirement:

a) University General Requirement Passed Sijil Pelajaran Malaysia (SPM)/equivalent with a credit in Bahasa Melayu/Bahasa Malaysia or a credit in Bahasa Melayu/Bahasa Malaysia July Paper;

and

Passed in MOE Matriculation with a CGPA of at least 2.00;

and

3


Obtained at least Band 1 in Malaysian University English Test (MUET) however the candidate is required to achieve at least Band 2 upon graduation


Obtained at least Grade C (2.00) at Matriculation/ Foundation level in these following subjects:

• Mathematics / Engineering Mathematics ; • Physics / Engineering Physics; and • Chemistry / Engineering Chemistry

and

Obtained at least a pass in SPM English Language.

and

Should have no impaired vision and any physical disabilities that interfere with practical works. Note: Students must obtain at least Band 2 MUET before graduation. PROGRAMME EDUCATIONAL OBJECTIVES (PEO) The Faculty has underlined the following long-term objectives for all its programs to produce:

1. Graduates with the necessary professional practice and acumen necessary for the success in the engineering profession and/or graduate level study

2. Graduates with the ability to practice mechanical engineering in the global marketplace and develop specialised interest in related areas.

3. Graduates with the competence to formulate and solve engineering problems through analytical and innovative approaches.

4. Graduates with the ability to communicate effectively, to lead and to appreciate entrepreneurship while being aware of environmental and ethical responsibilities.

5. Graduates with strong commitment for self learning and continuous professional development

PROGRAMME LEARNING OUTCOMES (PLO) Upon completion of the course the student should be able to:

1. Apply knowledge of mathematics, science, and engineering 2. Acquire in-depth knowledge and technical competency in mechanical systems and its related discipline. 3. Communicate effectively using a variety of appropriate mediums. 4. Adapt and use techniques, skills, and appropriate engineering tools necessary for engineering research

and practices 5. Identify problems, create solutions, innovate and improve current practices in mechanical systems and its

components. 6. Appreciate aesthetic values through applications of technical judgement and creativity. 7. Demonstrate professional and ethical responsibility with commitment to the community for the benefit of

mankind. 8. Work effectively in groups in ways that contribute to effective working relationships and the achievement

4


of goals both as a leader as well as effective team players

9. Comprehend global perspective on social culture and environmental responsibilities of a professional engineer in sustaining development

10. Recognise the need to engage in life-long learning 11. Recognise the importance of entrepreneurship in mechanical engineering and its related discipline.

Programme Structure

Code Subject Credit Lecture Tutorial Practical TCH UM* 1312 Foreign Language 2 2 1 0 3

UMA 1162 Islam Civilisation and Asian Civilisation

2 2 0 0 2

UMA 1182/ UMA 1142

Islamic Studies/Moral Studies 2 2 0 0 2

UMS 1122/ UMN 1312

Ethnic Relation/Malay Language 2 2 0 0 2

UMB 1042 Technical Writing 2 2 1 0 3 UMB 1052 Effective Communication 2 1 0 3 4 UMC 1022 Creativity and Innovation 2 2 1 0 3

UMS 1113/ UMS 1143

Nationhood and Current Development/Malaysia Studies and Culture

3 3 0 0 3

UQ* 1**1 Co- Curriculum I 1 0 0 3 3 UQ* 1**1 Co- Curriculum II 1 0 0 3 3

UMB 1011 English For Academic Purposes 1 0 0 0 1 BSM 1913 Engineering Mathematics I 3 3 1 0 4 BSM 1923 Engineering Mathematics II 3 3 1 0 4 BSM 2913 Engineering Mathematics III 3 3 1 0 4 BSM 2922 Engineering Statistics 2 2 1 0 3 BSM 3913 Engineering Mathematics IV 3 3 1 0 4

BDA 3053 Engineering Economics and Entrepreneurship

3 3 1 0 4

BDA 4042 Management and Professional Ethics

2 2 1 0 3

BDA 4052 Engineers and Society 2 2 1 0 3 BTI 1022 Computer Programming 2 1 0 3 4 BDA 1012 Engineering Drawings 2 1 0 3 4 BDA 1023 Static 3 3 1 0 4 BDA 1032 Material Sciences 2 2 1 0 3 BDA 1042 Mechanics of Solid I 2 2 1 0 3 BDA 1052 Fluid Mechanics I 2 2 1 0 3

BEE 1803 Electrical and Electronic Technology

3 3 1 0 4

BDA 1701 Engineering Lab I 1 0 0 3 3 BDA 1801 Mechanical Engineering Practice I 1 0 0 3 3 BDA 1811 Mechanical Engineering Practices II 1 0 0 3 3 BDA 2013 Dynamics 3 3 1 0 4 BDA 2022 Thermodynamics I 2 2 1 0 3

5


BDA 2033 Mechanics of Machine 3 3 1 0 4 BDA 2042 Engineering Materials Selection 2 2 1 0 3 BDA 2052 CAD and Modelling 2 1 0 3 4 BDA 2701 Engineering Lab II 1 0 0 3 3 BDA 2711 Engineering Lab III 1 0 0 3 3

BDA 2721 Engineering Lab IV 1 0 0 3 3

BDA 2801 Mechanical Engineering Practices III

1 0 0 3 3

BDA 2811 Mechanical Engineering Practices IV

1 0 0 3 3

BDA 3023 Fluid Mechanics II 3 3 1 0 4 BDA 3033 Solid Mechanics II 3 3 1 0 4 BDA 3043 Thermodynamics II 3 3 1 0 4 BDA 3052 Manufacturing Technology 2 2 1 0 3 BDA 3063 Heat Transfer 3 2 0 3 5 BDA 3073 Control Engineering 3 3 1 0 4 BDA 3083 Mechanical Design I 3 2 0 3 5 BDA 3701 Engineering Lab V 1 0 0 3 3 BDA 3711 Engineering Lab VI 1 0 0 3 3 BDA 4012 Industrial Engineering 2 2 1 0 3 BDA 4023 Mechanical Engineering Design II 3 2 0 3 5 BDA 4033 Finite Element Method 3 2 0 3 5 BDC 4013 Noise and Vibration 3 2 0 3 5 BDA 4804 Industrial Training(3 Months) 4 - - - - BDA 4902 Bachelor Project I 2 - - 6 6 BDA 4904 Bachelor Project II 4 - - 12 12 BD* 4**3 Elective I 3 2 0 3 5 BD* 4**3 Elective II 3 2 0 3 5 BD* 4**3 Elective III 3 2 0 3 5

TOTAL 129 94 26 90 211

Code Subject Credit Lecture Tutorial Practical TCH Manufacturing Elective

BDD 4013 Design for Manufacturing and Assembly

3 2 0 3 5

BDD 4023 Computer Aided Design and Manufacturing

3 2 0 3 5

BDD 4033 Manufacturing and Rapid Development

3 2 0 3 5

BDD 4043 Rapid Manufacturing 3 2 0 3 5

BDD 4053 Concurrent and Reverse Engineering

3 2 0 3 5

BDD 4063 Metal Casting Process 3 2 0 3 5 BDD 4073 Advanced Machining 3 2 0 3 5 BDD 4083 Manufacturing Control Technology 3 2 0 3 5

6


Material Elective

BDB 4013 Thermodynamics of Materials 3 2 0 3 5 BDB 4023 Material Testing 3 2 0 3 5 BDB 4033 Mechanical Metallurgy 3 2 0 3 5 BDB 4043 Corrosion and Prevention 3 2 0 3 5 BDB 4053 Applied Metallurgy 3 2 0 3 5 BDB 4063 Polymer and Ceramics 3 2 0 3 5 BDB 4073 Composite 3 2 0 3 5 BDB 4083 Advanced Materials 3 2 0 3 5

Gneral Mechanical Elective BDC 4023 Control System Design 3 2 0 3 5 BDC 4033 Stress Analysis 3 2 0 3 5 BDC 4043 Kinematics of Mechanism 3 2 0 3 5 BDC 4053 Fatigue and Fracture Mechanics 3 2 0 3 5 BDC 4063 Tribology 3 2 0 3 5 BDC 4073 Robotics 3 2 0 3 5 BDC 4083 Modelling and Simulation 3 2 0 3 5

Plant Elective

BDE 4013 Refrigeration and Air-conditioning System

3 2 0 3 5

BDE 4023 Energy Saving and Management 3 2 0 3 5 BDE 4033 Turbo Machinery 3 2 0 3 5 BDE 4043 Computational Fluid Dynamics 3 2 0 3 5 BDE 4053 Hydraulics Power 3 2 0 3 5 BDE 4063 Internal Combustion Engine 3 2 0 3 5

BDE 4073 Safety and Maintenance Engineering

3 2 0 3 5

BDE 4083 Aerodynamics 3 2 0 3 5 BDE 4093 Thermal Environment Design 3 2 0 3 5

Textile Elective

BDF 4013 Textiles Material Science 3 2 0 3 5 BDF 4023 Yarn Manufacturing Technology 3 2 0 3 5 BDF 4033 Fabric Manufacturing Technology 3 2 0 3 5 BDF 4043 Weaving Engineering 3 2 0 3 5 BDF 4053 Textiles Dyeing and Finishing 3 2 0 3 5 BDF 4063 Textiles Materials Testing 3 2 0 3 5


3 2 0 3 5

Packaging Elective

BDG 4013 Packaging Engineering Principles 3 3 0 3 6 BDG 4023 Packaging Equipments 3 3 1 3 7 BDG 4033 Packaging System I 3 2 0 3 5 BDG 4043 Packaging System II 3 2 0 3 5 BDG 4053 Packaging System Development 3 2 0 3 5 BDG 4063 Packaging Dynamics 3 2 0 3 5


3 2 0 3 5

7


Matrix of Programme Learning Outcome - Subjects

Code Subjects

Programme Learning Outcomes

LO1 LO2 LO3 LO4 LO5 LO6 LO7 LO8 LO9 LO10 LO11

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2

BDA 1012 Engineering Drawings x x x x x x x BDA 1023 Static

x x x x x x x

BDA 1032 Material Sciences x x x x x x x x x x x x BDA 1042 Mechanics of Solid I

x x x x x

BDA 1052 Fluid Mechanics I x x x x x x x x x x x BDA 1701 Engineering Lab I

x x x x x x x x

BDA 1801

Mechanical Engineering Practice I

x

x

x x x

x

x

x

BDA 1811

Mechanical Engineering Practices II

x

x

x x

x

x

x

x

BDA 2013 Dynamics

x x x x x x x x x

BDA 2022 Thermodynamics I x

x

x

x

x

x

x

x

BDA 2033 Mechanics of Machine

x x x x x x x x x x x

BDA 2042

Engineering Materials Selection x x x x x x x

BDA 2052 CAD and Modelling x x x x x x x x x x x x BDA 2701 Engineering Lab II x

x

x

x

x

x x

x

x x

BDA 2711 Engineering Lab III

x x x x x x x x

BDA 2721 Engineering Lab IV x

x

x

x

x

x x

x

x x

BDA 2801

Mechanical Engineering Practices III

x x x x x x x

BDA 2811

Mechanical Engineering Practices IV

x x x x x x x x x x x

BDA 3023 Fluid Mechanics II x x x x x x x x BDA 3033 Solid Mechanics II

x x

x

x x

x

8


BDA 3043 Thermodynamics II

x x x x x x x x x x

BDA 3052

Manufacturing Technology x x x x x x x x x x x

BDA 3053

Engineering Economics and Entrepreneurship

x x x x x x x

BDA 3063 Heat Transfer x

x

x x x x x

x

x x

x

BDA 3073 Control Engineering

x

x

x

x

x

x

x

x

x

BDA 3083 Mechanical Design I x x x x x x BDA 3701 Engineering Lab V x x x x x x x x x x BDA 3711 Engineering Lab VI x

x x x x x x x x x x x x x x x x x

BDA 4012 Industrial Engineering x

x

x x

x

x

x x

x

x

BDA 4023

Mechanical Engineering Design II

x x x x x x x x x

BDA 4033 Finite Element Method

x x x x x x x x x

BDA 4042

Management and Professional Ethics

x

x x

x

x

x x x

x x

x

BDA 4052 Engineers and Society

x x

x x

x x x x x

x x x

x

BDA 4804

Industrial Training(3 Months)

x x x x x x x x x x x x x x x

BDA 4902 Bachelor Project I

x x x x x x x x x x x x x

BDA 4904 Bachelor Project II

x x x x x x x x x x x x x x

BDB 4013

Thermodynamics of Materials x x x x x x x x x x

BDB 4023 Material Testing x x x x x x x x x BDB 4033 Mechanical Metallurgy x x x x x x BDB 4043

Corrosion and Prevention x x x x x x x x x

BDB 4053 Applied Metallurgy x x x x x x x BDB 4063 Polymer and Ceramics x x x x x x x x x x BDB 4073 Composite x x x x x x x x x x BDB 4083 Advanced Materials x x x x x x x x

9


BDC 4013 Noise and Vibration

x x

x x

x x x x

x

x

x

BDC 4023 Control System Design

x x x x x x x

BDC 4033 Stress Analysis

x x x x x x x x

BDC 4043

Kinematics of Mechanism

x x x x x x x x

BDC 4053

Fatigue and Fracture Mechanics

x x x x x x x x

BDC 4063 Tribology

x x x x x x x

BDC 4073 Robotics

x x x x x x x x x x

BDC 4083

Modelling and Simulation

x x x x x x x x x x

BDD 4013

Design for Manufacturing and Assembly x x x x x x x x x x

BDD 4023

Computer Aided Design and Manufacturing x x x x x x x x

BDD 4033

Manufacturing and Rapid Development

BDD 4043 Rapid Manufacturing x x x

x x x

x

x x x

BDD 4053

Concurrent and Reverse Engineering x x x x

x x

x

x x

x

BDD 4063 Metal Casting Process x x

x

x x

x

x

x

BDD 4073 Advanced Machining x x x x x x x x x x x x x BDD 4083

Manufacturing Control Technology x x x x x x x x x x x

BDE 4013

Refrigeration and Air-conditioning System

x x x x

BDE 4023

Energy Saving and Management

x x x x

BDE 4033 Turbo Machinery

x x x x

BDE 4043

Computational Fluid Dynamics

x x x x

BDE 4053 Hydraulics Power

x x x x

BDE 4063

Internal Combustion Engine

x x x x

BDE 4073

Safety and Maintenance

x x x x

10


Engineering

BDE 4083 Aerodynamics

x x x x

BDE 4093

Thermal Environment Design

x x x x

BDF 4013

Textiles Material Science x x x x x x

BDF 4023

Yarn Manufacturing Technology x x x x

BDF 4033

Fabric Manufacturing Technology x x x x

BDF 4043 Weaving Engineering x x x BDF 4053

Textiles Dyeing and Finishing x x x x

BDF 4063

Textiles Materials Testing x x x x

BDG 4013

Packaging Engineering Principles

x x x x x

BDG 4023 Packaging Equipments

x

x

x

BDG 4033 Packaging System I

x x x

x

BDG 4043 Packaging System II

x

x

x

BDG 4053

Packaging System Development

x

x

x x x

BDG 4063 Packaging Dynamics

x

x

x x

Graduation requirement Requisite for graduation;

1. Application for graduation is done by the student and must be certified by faculty. 2. Passed all required subjects according to the program needs. 3. Accumulate the required credit and acquire the “KB (kedudukan baik)” status. 4. Achieve at least a distinction in Malay Language at the SPM level. 5. Application for graduation must be made by filling out the relevant forms within the specified period. 6. Must be approved and verified by Senate.

Employment Opportunities Employment opportunities for graduates as a mechanical engineer are very wide, either locally or internationally. The industrial training that graduates had gone through will put them in a strong position to contribute greatly in thier chosen field. Generic skills inculcated throughout the duration of the programme also makes graduates more rounded in their outlook. Those interested in research, have the opportunity to contribute in the various research institution throughout the world. Apart from that, post graduates studies are also available to graduates,

11


locally or internatinally, if they acquire excellent academic achievements. Related information (Lectures / Facilitators / Projects /Target group / Fees / etc.) 1. Academic Staff

i. Lecturers for university’s compulsary subjects are from Centre of Science Studies (PPS), Centre of Communication and Humanities Studies (PPKK), and Centre of Co-Curricular, Sports and Culture (PKSK). Meanwhile, lecturers for core subjects of this programme are from the faculty itself.

ii. Engineering Practice subjects will be taught by instructors/facilitators with wide working experience in the

industries. 2. Concept of Education

This programme is a practice-oriented programme with Outcome Base Education (OBE) concept, where students will undergo the theoretical and practical training of 8 semesters in university and 12 weeks of industrial training.

3. Fees

The fees for this programme is RM 510.00 (one time fee) and RM 1908.00 (recurring fee for every semester)

4. The faculty’s PROFORMA is available in www.uthm.edu.my

Prepared by : ………………………………………………….. Profesor Hj. Mohd Imran b. Hj. Ghazali Deputy Dean (Academic and Internationalization) Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia Tel: 07-4537710

Verified by : ………………………………………………….. Prof. Dr. Sulaiman bin Hj. Hasan Dean Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia Tel: 07-4537700

Date : June 2009 Date: June 2009 Note: Information is valid at printing and can be changed from time to time

FACULTY OF MECHANICAL AND MANUFACTURING...

Documents

Transcript of FACULTY OF MECHANICAL AND MANUFACTURING...