FACTORY HEADQUARTERS SEMITRAILER S3NA …€¦ · manufacturing and commissioning. Standard...
Transcript of FACTORY HEADQUARTERS SEMITRAILER S3NA …€¦ · manufacturing and commissioning. Standard...
EN-2016-01. MADE IN SPAIN
FACTORY
PG. CL. De la Cierva, 18-20 02600 Villarrobledo (Albacete) ESPAÑA Tlf. +34 967 138 176
Fax. +34 967 138 177
HEADQUARTERS
PG. CL. De la Cierva, 16 02600 Villarrobledo (Albacete) ESPAÑA Tlf. +34 967 141 434
Fax. +34 967 138 177
INFORMATION REQUEST: [email protected] TYPE APPROVAL e9*2007/46
ww
w.g
ru
po
-a
lite
.eu
SEMITRAILER S3NA INTEGRAL ALUMINUM
WITH HYDRAULIC MOVING FLOOR
WATERTIGHT ALITE LEAK PROOF
WITHOUT LEAKAGE
EN-2016-01. MADE IN SPAIN
S3NA LIGHT AND 100% WATERTIGHT
Our ALITE S3NA semitrailer with moving floor ALITE LEAK PROOF represents the most optimized solution for
transportation, loading and unloading of goods with fluid component that exists today. The result of our passion for
ALITE innovation has designed, developed and manufactured a comprehensive mobile floor semitrailer aluminum
mobile watertight floor without loss of interior volume, since the machine moving floor is located at the rear below the
surface loading and not on the front as other manufacturers.
Construction large volume, up to 2,700 mm height useful interior height fifth wheel 1.100 mm. Useful construction volume in straight drawer 90 m2.
Empty weight: 8.650 Kg ± 3%, with 6 tires
385/55 R22,5 rims aluminum with maximum
dimensions and 2.700 mm useful interior height.
3 axels BPW EcoPlus III. HALDEX EBS 4S /
2M. MICHELIN 385 / 55-65 R22,5. ALCOA aluminum
rims Dura Brite option.
Construction 100% watertight leak proof.
Backdoor electrohydraulic drive with 6
synchronized security closures. Stainless steel
hardware AISI 304 2B.
Drawer load without loss diaphanous interior
volume. Drawer at the rear for collecting leaks in
the mooring area of the sheets. By opening the
sealed door all solid and liquid volume is
discharged.
Mobile floor machine isolated from the wet area.
Kindred stainless steel AISI 304 2B chrome in 2 components.
Easy access to leachate tank for maintenance
and cleaning.
EN-2016-01. MADE IN SPAIN
PARTNERS
A • Braced suspension so screwed:
more efficient and lightweight.
L
• Aluminum reboilers, 2 x 60 l for brake system and 1 x 60 l for
suspension circuit.
I
• Neck lowered chassis height of 100 mm. Extruded flat table
without stringers.
T
• Mounting possibility for self-contained diesel motor with axial
piston pump.
E • Side protection folding anodized
aluminum.
MOBILE FLOOR ALITE LEAK PROOF
• Own manufacture ALITE.
• Integrated fully team in the
vehicle structure .
• stems with 2 separate
components of the cylinders.
• Screw mounting on aluminum
chassis rear overhang.
• 18 sheets of reinforced aluminum
AL6082 T6.
• Machining Slide ways
polyethylene entire blade length.
• Maximum capacity 28 tons.
• Electrically operated by hand
control panel and by wireless
radio; emergency manual.
Sliding roof hydraulic type or kind canvas opener.
EN-2016-01. MADE IN SPAIN
LEAK PROOF
Model Leak Proof moving floor of
ALITE is a hydraulic solution for
loading and unloading horizontally split
tonnage vehicles with fluid component
loads. This model conforms to
regulations Machines (EC) and other
applicable regulations. Incorporate all
the technical advances from design to
manufacturing and commissioning.
Standard equipment:
• 18 sheets of reinforced aluminum AL6082 T6.
• Integral sliding guides machined polyethylene 10 mm
thick.
• Distributor mounted on rod cylinder compact direct drive
control by the cylinders.
• Storage integrated fluid collection
• 3-cylinder double acting 105 mm diameter reinforced.
• Kindred chromed steel F125.
• sliding guides machined in Delrin rods.
• Arms movement with galvanized steel sheets hot.
• 3 bars of guide blocks machined polyethylene.
• Fixed electrical control box with control via cable
TIGHT MOBILE FLOOR ALITE
d
Compact modular design 100% airtight equipment without volume loss in the front. Guided high density polyethylene entire length to reduce
wear and increase impact resistance laminae.
Cilinder roods in 2 parts F125 chrome steel, removable cylinder, to facilitate
maintenance.
Compact aluminum distributor Electrical control with integrated emergency manual actuators.
EN-2016-01. MADE IN SPAIN
OVERALL DIMENSIONS OF EQUIPMENT INTEGRATED CHASSIS SEMITRAILER ALITE:
FEATURES:
Maximum pressure (bar): 180 minimum-maximum flow rate (l/min): 40 – 120 maximum charge-discharge capacity (Tn): 30 Standard drive: Electric Emergency drive: Manual Full equipment weight (Kg): 485 Operating time (100 l/min): 12 cycles/min Peak power (100 l/min): 35,5 kW
TECHNICAL CHARACTERISTICS
MOUNTING
Fixing the equipment will be
made so screwed to lateral shields at
the rear of the chassis beams.
This equipment can only be
mounted on a semitrailer ALITE
designed and adapted to your
installation.
WE CONTROL OUR
PRODUCTS
OWN
MANUFACTURE!!!