fabricator 200

Fabricator Series

fabricator family brochure.qxp 2/4/08 09:59

Fabricator 200 Compact MIG (GMAW) Transformer Rectifier Machine

Machine Specifications

Input Voltage 1ph. 230vInput Frequency 50/60 HzOutput range 30 – 200 AmpsRated Output @ Duty Cycle 13% @ 200A

30% @ 145AArc Voltage Range 15 - 22vVoltage Settings 8Dimensions (HxWxD) 770 x 410 x 830 mmWeight 58 kg

Wire Feed System Specifications

Wire Feed Speed Range 1 - 18 m/minWire Drive Type 2 RollWire Diameter Range Hard Wire 0.6-0.8mm

Soft Wire 0.8-1.0mmCored Wire 0.6-1.2mm

The Fabricator 200 is a 230 volt, single phase,MIG machine ideally suited for light fabrication,automotive repairs, light rural and maintenanceapplications. It comes complete with wheels,cylinder tray, MIG gun, work lead, flow regulatorin a ready to weld package. The Fabricator 200delivers a high maximum output of 200 amps

Features:

• 8 Fine Welding Voltage Control Settings

• 200 amp maximum output

• Reverse polarity for gas/gasless operation

• Thermal Overload Protection with Indicator

• Optimum arc starting feature

• Spot timer control

• 3 Years Warranty

OPTIONS AND ACCESSORIES

Part No. Description62020 0.6/0.8mm Hard Wire V groove feed roll 62179 0.8/1.0mm Soft Wire U groove feed roll62024 0.9/1.2mm Soft Wire U groove feed roll62028 0.8/0.9mm Cored Wire V knurl feed roll62023 1.2/1.6mm Cored Wire V knurl feed roll

TS212X4045EL 3.6m Spitfire 250A MIG GunTS215X4045EL 4.5m Spitfire 250A MIG Gun

Part No - 707079 Fabricator 200 Machine with Work Lead, Wheeling Kit/Cylinder Tray,gas hose, 0.6/0.8 Feed Roll and operating manual


Fabricator 250 Compact MIG (GMAW) Transformer Rectifier Machine


Input Voltage 1ph. 230vInput Frequency 50/60 HzOutput range 30 – 250 AmpsRated Output @ Duty Cycle 50% @ 250A Arc Voltage Range 15 - 29vVoltage Settings 16Dimensions (HxWxD) 800 x 355 x 850 mmWeight 103 kg




The Fabricator 250 Compact is a multi-voltage, singlephase high output and high duty cycle DC powersource. This unit is the ideal choice for single phaseuse for light and medium fabrication and heaviermaintenance applications.The Fabricator 250 Compact provides excellent arccharacteristics with Gas Metal Arc Welding (GMAW)and Flux Cored Arc Welding (FCAW) with or withoutgas.

Features:

•16 Fine Welding Voltage Control Settings


• Reverse Polarity Facility

• Spot Timer Control

• Adjustable Burnback Control

• Trigger Latching Facility



Part No. Description62020 0.6/0.8mm Hard Wire V groove feed roll 62022 0.9/1.2mm Hard Wire V groove feed roll62179 0.8/1.0mm Soft Wire U groove feed roll62024 0.9/1.2mm Soft Wire U groove feed roll7977728 1.2/1.6mm Soft Wire U groove feed roll62028 0.8/0.9mm Cored Wire V knurl feed roll62023 1.2/1.6mm Cored Wire V knurl feed roll

TS212X4045EL 3.6m Spitfire 250A MIG GunTS215X4045EL 4.5m Spitfire 250A MIG Gun

Part No - 706114 Fabricator 250 Compact Machine complete with feed rolls for 0.6/1.0mm wire, gas hose, earth cable and clamp, mains cable and operating manual


Fabricator 330 Compact and Separate with VF2c Wire Feed UnitMIG (GMAW) Transformer Rectifier Machine


Input Voltage 3ph. 220/380/400vInput Frequency 50/60 HzOutput range 25 – 330 AmpsRated Output @ Duty Cycle 30% @ 330A Arc Voltage Range 16 - 29vVoltage Settings 24Dimensions (HxWxD) 800 x 355 x 850 mm (Compact + Separate)Weight 85 kg Compact

102 kg Separate




The Fabricator 330 Compact and VF2c SeparateWirefeeder models are multi-voltage, three phase,constant voltage DC power sources targeted atmedium fabrication and heavier maintenanceapplications.The Fabricator 330 provides excellent arc characteristics with Gas Metal Arc Welding(GMAW) and Flux Cored Arc Welding (FCAW) withor without gas.

Features:

• 24 Fine Welding Voltage Control Settings


• Adjustable BurnBack Control

• Spot Timer Control (Compact model only)

• Stitch Timer Control (Compact model only)





Part No. Description62020 0.6/0.8mm Hard Wire V groove feed roll 62022 0.9/1.2mm Hard Wire V groove feed roll62179 0.8/1.0mm Soft Wire U groove feed roll62024 0.9/1.2mm Soft Wire U groove feed roll7977728 1.2/1.6mm Soft Wire U groove feed roll62028 0.8/0.9mm Cored Wire V knurl feed roll62023 1.2/1.6mm Cored Wire V knurl feed roll705975 Wire feeder swivel base704913 Wire feeder trolley705900 8m interconnecting ext. cable705948 Spool Cover

TS412X3545EL 4m Spitfire 450A MIG GunTS415X3545EL 5m Spitfire 450A MIG Gun

Part No - 706124 Fabricator 330 Compact Machine complete with feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual

Part No - 706125 Fabricator 330 Separate complete with VF2c roll feeder, 8m connecting cable,feed rolls for 0.6/1.2mm wire, gas hose, earth cable and clamp, mains cable and operating manual


Fabricator 400II Separate with VF4ECII Wire Feed UnitMIG (GMAW) Transformer Rectifier Machine


Input Voltage 3ph. 400vInput Frequency 50/60 HzOutput range 40 – 400 AmpsRated Output @ Duty Cycle 30% @ 400A Arc Voltage Range 19.9 - 46.6vVoltage Settings 20Dimensions (HxWxD) 1360 x 370 x 760 mmWeight 110 kg


Wire Feed Speed Range 1 - 19 m/minWire Drive Type 4 Roll GearedWire Diameter Range Hard Wire 0.6-1.2mm


The Fabricator 400II Separate with VF4ECII Wire FeedUnit is a three phase, 400A MIG machine with 20Voltage settings, digital meters and micro processorcontrol.Easy to use with medium to heavy applications inmind, the Fabricator 400II has been designed withrobustness and reliability as its priorities to copewith a wide range of material requirements in theharshest of environments. Copper wound transformers are standard to give outstanding welding characteristics.

Features:



• Stitch Timer Control



• Electronic Feedback of Wire Speed

• Voltage and Amp Meters at WFU

• Pre and Post Gas Control

• Initial Speed Control



Part No. DescriptionVM0263 1m Interconnecting cable assy a/cVM0266 5m Interconnecting cable assy a/cVM0267 10m Interconnecting cable assy a/cU45806 0.6/0.8mm Hard Wire V Groove Feed RollU45810 1.0/1.2mm Hard Wire V Groove Feed RollU45812 1.2/1.6mm Hard Wire V Groove Feed RollU45820 10/1.2mm Soft Wire U Groove Feed RollU45822 1.2/1.6mm Soft Wire U Groove Feed RollU45826 1.6/2.0mm Soft Wire U Groove Feed RollU45830 1.0/1.2mm Cored Wire V Groove Feed RollU45832 1.2/1.6mm Cored Wire V Groove Feed Roll


Part No - 10-9405 Fabricator 400A Remote system with 1m interconnection, 1.0/1.2 mm drive rolls, earth cable & clamp, feeder wheel kit, mains cable and operating manual


Fabricator 450II Separate with VF4ECII Wire Feed UnitMIG (GMAW) Transformer Rectifier Machine


Input Voltage 3ph. 400vInput Frequency 50/60 HzOutput range 40 – 520 AmpsRated Output @ Duty Cycle 60% @ 400A Arc Voltage Range 19.5 - 56vVoltage Settings 30Dimensions (HxWxD) 1400 x 470 x 770 mm Weight 165 kg


Wire Feed Speed Range 1 - 19 m/minWire Drive Type 4 Roll GearedWire Diameter Range Hard Wire 0.6-1.6mm


The Fabricator 450II Separate with VF4ECII WireFeed Unit is a three phase, 520A MIG machinewith 30 Voltage settings, digital meters and microprocessor control.Easy to use with the heavy industrial user in mind,the Fabricator 450II has the power to cope withalmost any application. With robustness and reliability as standard, the option of water coolingis made easy by the addition of a purpose builtwater cooler with flow switch protection. Copperwound transformers are standard giving 520Aoutput with outstanding welding characteristics.

Features:






• Electronic Feedback of Wire Speed

• Voltage and Amp Meters at WFU

• Pre and Post Gas Control

• Initial Speed Control

• Water Cooler System Protection

• Easy Fit Water cooler



Part No. DescriptionA.028 Water Cooler c/w fittingsVM0264 1m Interconnecting cable assy w/cVM0265 5m Interconnecting cable assy w/cVM0268 10m Interconnecting cable assy w/cVM0263 1m Interconnecting cable assy a/cVM0266 5m Interconnecting cable assy a/cVM0267 10m Interconnecting cable assy a/cU45806 0.6/0.8mm Hard Wire V Groove Feed RollU45810 1.0/1.2mm Hard Wire V Groove Feed RollU45812 1.2/1.6mm Hard Wire V Groove Feed RollU45820 10/1.2mm Soft Wire U Groove Feed RollU45822 1.2/1.6mm Soft Wire U Groove Feed RollU45826 1.6/2.0mm Soft Wire U Groove Feed RollU45830 1.0/1.2mm Cored Wire V Groove Feed RollU45832 1.2/1.6mm Cored Wire V Groove Feed Roll


Part No - 10-9406 Fabricator 450A Separate system with 1m interconnection A/C,1.0/1.2 mm drive rolls, earth cable & clamp, feeder wheel kit,mains cable and operating manual


Fabricator 500 E Separate with VF4E Wire Feed UnitMIG (GMAW) Thyristor Controlled Machine


Input Voltage 3ph. 400vInput Frequency 50/60 HzOutput range 25 – 500 AmpsRated Output @ Duty Cycle 35% @ 500A

60% @ 450A 100% @ 340A

Arc Voltage Range 11 - 44vVoltage Settings VariableDimensions (HxWxD) 860 x 465 x 895 mmWeight 140 kg


Wire Feed Speed Range 1.5 - 20 m/minWire Drive Type 4 Roll GearedWire Diameter Range Hard Wire 0.6-1.6mm


The Fabricator 500 E is a DC constant voltage thyristor

controlled power source with VF4E fully enclosed 4 roll

drive, heavy duty wire feed unit. This rugged unit is

designed for MIG (GMAW) and Flux Cored Arc Welding(FCAW) in all medium to heavy fabrication andheavy maintenance applications.

Features:







• Voltage and Wire Feed Speed Control at Feeder

• Variable Voltage Control

• Variable Inductance Control



Part No. Description030354-1 5m interconnecting cable 030356-1 10m interconnecting cable for water/air030350 Thermal Arc ‘Cooler MIG’ Integrated Water

Cooler Kit with water hoses and fittings U45608 0.8/1.0mm Solid Wire Feed RollU45612 1.2/1.6mm Solid Wire Feed RollU45610 1.2/1.6mm Aluminium Feed RollU45617 1.2/1.6mm Cored Wire Feed RollU45618 2.0/2.4mm Cored Wire Feed Roll


Part No - 10-9409 Fabricator 500 E Separate with VF4E Wire Feed unit complete with feed rolls for 0.8/1.6mm solid wire, 1m interconnecting cable, earth cable and clamp, swivel mount feeder trolley, mains cable and operating manual


www.thermalarc.com

Thermadyne UK

Tel: (44) 1257 261755 Fax: (44) 1257 224800

Thermadyne Italia

Tel: (39) 0236546801 Fax: (39) 0236546840


fabricator 200

Documents

Transcript of fabricator 200