Fabrication of rod bending machine
-
Upload
ecwayerode -
Category
Education
-
view
284 -
download
0
description
Transcript of Fabrication of rod bending machine
FABRICATION OF HYDRILIC ROD BENDING MACHINE
Synopsis:
Our project work is “FABRICATION OF ROD BENDING MACHINE”
it can be mainly used in industrial area for dismantling and purpose. Portable Port
type hydraulic power press is used to remove bearing from shaft in machine
assembly area or use to insert any kind of bush in force fit manner. So there is no
need to go machine shop to remove bearing from the assembly point. And it is
portable one so that we can take this anywhere.
Hydraulic system is used to most important process of Industries and
factories. Any work done by Hydraulic system, Ex: Lifting, Pulling, Pushing,
Pressing, machining etc., above process can be made to easily vide by Hydraulic
system. In this method of machineries work is designed through Hydraulic oil.
Generally, Hydraulic oil is a heavy density of the liquid, so this process are used to
all kinds of work.
All types of works can be successfully finished for this hydraulic oil
pumping pressure-creating method. Hydraulic pump and hydraulic cylinder are
used this process. Hydraulic cylinders ram is increase and decrease operation
finished in this process.
Generally, Hydraulic cylinder operations are based on hydraulic pump
operation. Hydraulic oil is available in the tank. Tank is the one of the portion in
ECWAY TECHNOLOGIESIEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABADCELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 /
8111VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: [email protected] | [email protected]
ECWAY TECHNOLOGIESIEEE PROJECTS & SOFTWARE DEVELOPMENTS
OUR OFFICES @ CHENNAI / TRICHY / KARUR / ERODE / MADURAI / SALEM / COIMBATORE
BANGALORE / HYDRABADCELL: +91 98949 17187, +91 875487 1111 / 2111 / 3111 / 4111 / 5111 / 6111 /
8111VISIT: www.ecwaytechnologies.com | www.ecwayprojects.com
Mail to: [email protected] | [email protected]
the hydraulic pump. Hydraulic oil is pumping to the Hydraulic cylinder by using
hydraulic pump system. It’s the manual operation.
All hydraulic oil stored in the hydraulic cylinder. So high oil pressure create
in the cylinder portion. In this time, ram can move in the cylinder portion. So ram
can perform to our selected job. Jobs moving operation is based on length of the
ram. Different types of jobs can be performed hydraulic method. Example
Hydraulic car jack, Hydraulic JCB crane, Hydraulic pipe bending machine etc;
In this project we have to design port type integrated hydraulic
circuit. I this circuit there is no need for separate oil pump hydraulic houses, D.C
valves, Pumps etc. These all those things are integrated with the hydraulic cylinder
itself.
ADVANTAGES
1. It eliminates complicated parts like hydraulic cylinder pipe
connections and pressure tubes.
2. Fluid Power transmitted through port so high efficient.
3. Control of system is easier
4. Maintenance cost is less
5. Can be achieved up to two ton force.
In this Hydraulic system lubricating system not necessary so that wear and tear
very low.
APPLICATION
1. Engine recondition works
2. Pump assembling works
3. A/C &D/C Motor repair works.