Assembly Instructions:1) Enlarge the templates 200%. Following the manufacturer’s instructions, trace the six large diamonds, twelve medium

diamonds and twenty-two small diamonds onto the paper side of the fusible web.

2) Roughly cut out each shape outside the drawn lines. Press the listed number of diamonds to the back side of the

fabric as listed in the cutting instructions. Cut out each diamond on the drawn lines.

3) Refer to the quilt photo and press the diamonds onto the marbled backgrounds as shown. Finish the raw edges with a

decorative stitch such as a satin or buttonhole stitch with a bright variegated thread.

4) Refer to the quilt photo and sew the small diamond blocks and 2-1/2” x 8-1/2” Fabric A strips together to make the first and

third rows.

5) Refer to the quilt photo and sew together the medium diamond blocks and 3-1/2” x 12-1/2” Fabric A strips to make the

second and fifth rows.

6) Refer to the quilt photo to sew the large diamond blocks together for row four.

7) Starting with the first row, sew the rows and 2-1/2” x 48-1/2” sashing strips together alternating them to make the quilt top.

8) Layer, quilt and bind as desired.

Fabric Requirements: Cutting Instructions:Fabric A: 1/3 yard of EUJ-7980-195 Cut four 2-1/2” x 8-1/2” strips and eight 3-1/2” x 12-1/2” strips for vertical

sashing.

Fabric B: 3/4 yard of EUJ-7976-195 See instructions to cut one large, two medium and four small diamonds.

Fabric C: 1/3 yard of EUJ-7976-194 See instructions to cut one medium and four small diamonds.

Fabric D:3/4 yard of EUJ-7977-205 See instructions to cut two large, three medium and two small diamonds.

Fabric E: 1/2 yard of EUJ-7979-195 See instructions to cut two medium and three small diamonds.

Fabric F: 3/4 yard of EUJ-7979-194 See instructions to cut one large, one medium and three small diamonds.

Fabric G: 3/4 yard of EUJ-7978-205 See instructions to cut one large, two medium and two small diamonds.

Fabric H: 3/4 yard of EUJ-7978-194 See instructions to cut one large, one medium and four small diamonds.

Fabric I: 1/2 yard of DRJ-6110-8 Cut one 12-1/2” square, one 6-1/2” x 12-1/2” strip and two 8-1/2” squares.

Fabric J: 1/3 yard of DRJ-6110-50 Cut three 8-1/2” x 16-1/2” strips.

Fabric K: 3/4 yard of DRJ-6110-124 Cut one 12-1/2” x 18-1/2” strip, one 12-1/2” square, one 8-1/2” x 20-1/2”

strip and two 8-1/2” x 16-1/2” strips.

Fabric L: 1 yard of DRJ-6110-216 Cut one 12-1/2“ x 18-1/2” strip. one 8-1/2” x 20-1/2” strip, three

8-1/2” x 16-1/2” strips and one 6-1/2” x 12-1/2” strips.

Sashing & Binding: 3/4 yard of DRJ-6110-3 Cut twelve 2-1/2” x width of fabric (WOF) strips. Piece the strips together

to make four 2-1/2” x 48-1/2” strips. Cut six 2-1/4” x WOF strips for

the binding.

Backing: 3-1/2 yards of your choice. Cut and piece into one 56” x 68” backing.

Fusible Web

Gaughin QuiltQuilt designed Heidi Pridemore Throw size Quilt- approximate size 48” x 60” Advanced Beginner Level

All border strip length measurements are approximate. Please measure your quilt top before cutting the length of each border.

Large Diamond 8” x 16”

Medium Diamond 6” x 12”

Large Diamond 4” x 8”

ENLARGE TEMPLATES 200%