Fabric and quilt by Pearl P. PereiraMachine quilting by Lois Russell

Finished size of quilt: 68" x 68"

www.redroosterfabrics.com

Fabric from the “Little Red Riding Hood” collection (style #3325) by Pearl P. Pereira of P3 Designs for Red Rooster Fabrics.

FABRIC REQUIREMENTSPattern # 17956 – BEI1 ...........................................................................21/4 yards 17957 – BEI1 ...........................................................................15/8 yards 17958 – BLA1 ..........................................................................1/8 yard 17959 – GOL1.........................................................................1/3 yard 17959 – BRO1 .........................................................................1/3 yard 17959 – GRE1 .........................................................................1/3 yard 17959 – BLU1 .........................................................................1/3 yard 17960 – BEI1 ...........................................................................1/4 yard 17960 – BLU1 .........................................................................1/8 yard 17960 – GRE1 .........................................................................1/8 yard 17960 – RED1 .........................................................................11/8 yards (includes binding) 17960 – GOL1.........................................................................1/8 yard 17961 – BEI1 ...........................................................................2/3 yard 17961 – BLA1 ..........................................................................1/4 yard 17961 – DKBLU1 ....................................................................1/2 yard 17961 – DKGRE1 ....................................................................1/4 yard 17961 – GOL1.........................................................................1/2 yard 17961 – RED1 .........................................................................2/3 yard 17962 – BEI1 ...........................................................................2/3 yard 17963 – BEI1 ...........................................................................1/3 yard 16152 – BEI1 ...........................................................................3/4 yardFlesh colored fabric .................................................................................1/8 yardBacking ....................................................................................................41/8 yardsBatting .....................................................................................................74" x 74"Additional Supplies: Embroidery floss for eyebrows, nose, hood tie, and mouth. Fabric paint for cheeks and lips.

DIAGONAL CORNER TECHNIQUEThis method is used in the piecing directions that follow. Draw a diagonal line on reverse side of a small square. Place right sides together on a larger square or a rectangle (Figure A). Stitch on the diagonal line. Trim to a 1/4" seam allowance. Press seam open (Figure B). All seam allowances are 1/4".

APPLIQUÉ CENTER BLOCKPattern #17961 – BEI1 (pin dot): Cut one 97/8" square (A).Pattern #17960 – BLU1 (stripe): Cut two 11/2" x 42" strips. Crosscut

two 11/2" x 97/8" strips (B) andtwo 11/2" x 117/8" strips (C).

Pattern #17963 – BEI1 (motif toss): Cut two 91/2" squares. Cut each

block once diagonally to make four triangles (D).

Pattern #17961 – DKGRE1 (pin dot): Cut two 11/2" x 42" strips. Crosscut

two 11/2" x 141/2" strips (E) and two 11/2" x 161/2" strips (F).

APPLIQUÉ FABRICSPattern #17961 – RED1 (pin dot): hood and fl owerPattern #17960 – RED1 (stripe): capePattern #17961 – BLA1 (pin dot): lower capePattern #17960 – GRE1 (stripe): leavesPattern #17961 – DKGRE1 (pin dot): leavesPattern #17961 – GOL1 (pin dot): fl ower & fl ower centerPattern #17960 – GOL1 (stripe): hair, fl ower & fl ower centerPattern #17958 – BLA1 (check): fl ower centerPattern #17961 – DKBLU1 (pin dot): eyesPattern #17960 – BLU1 (stripe): dress & eyesFlesh colored fabric for face & neck

1. Prepare appliqué shapes using your favorite method.

2. Position appliqué on the 97/8" A square (Figure 1). Appliqué by hand or machine.

3. Sew B strips on opposing sides of the A block. Press toward B.Repeat with C strips (Figure 2). Press toward C. Block should measure 117/8" square.

4. Sew D triangles on opposing sides of block (Figure 3). Press toward B.Repeat with remaining D triangles. Press toward C.Square up block to 161/2" x 161/2".

5. Sew E strips on opposing sides of block. Press toward E. Repeat with F strips (Figure 4). Press toward F. Block should measure 181/2" square.

6. Embroider eyebrows, nose, hood tie, and outline embroider mouth with embroi-dery fl oss in the color of your choice. Blush the cheeks and lips with fabric paint.

Round One: MOTIF BLOCKS & 9 PATCHPattern #17956 – BEI1 (panel print): Cut eight 61/2" x 61/2" motif squares (A).Pattern #17960 – BEI1 (stripe): Cut three 21/2" x 42" strips (B).Pattern #17961 – RED1 (pin dot): Cut three 21/2" x 42" strips (C).

1. Sew one B and two C strips together (Figure 5). Press toward C. Crosscut sixteen 21/2" C/B/C units (Figure 6).

2. Sew one C and two B strips together (Figure 7). Press toward C. Crosscut eight 21/2" B/C/B units (Figure 8).

3. Sew two C/B/C units and one B/C/B unit together (Figure 9). Press seams open. Blocks should measure 61/2" square.

4. Sew two 61/2" A motif squares and one 9-Patch block together. Press toward the A squares. Make two. Sew the strips to each side of the center block (Figure 10).

5. Sew two 61/2" A motif squares and three 9-Patch blocks together. Press toward the A squares. Make two. Sew the strips to the top and bottom of the appliqué unit (Figure 11). The unit should measure 301/2" square.

Appliqué Center BlockFinished size: 18˝ square.Make one.

A

Figure 1

Figure 3

D

Figure 4

F

E

9-Patch BlockFinished size: 6˝ square.Make eight.

Figure 10

B

C

Figure 2

Figure 11

Figure 7 Figure 8 Figure 9Make eight.

B

B

C

Figure 5 Figure 6

BC

C

Figure A Figure B

6. Sew 9-Patch squares to each end of the two remaining strip sets (Figure 23). Press seams away from the 9-Patch blocks. Make two. Sew units to top and bottom of the quilt top. Press seams toward the strips. Quilt top should measure 421/2" square.

Round Four: MOTIF SQUARES & BASKET BLOCKSPattern #17956 – BEI1 (main print): Cut sixteen 61/2" x 61/2" motif squares.Pattern #16152 – BEI1 (background): Cut two 4" x 42" strips. Crosscut sixteen

4" (A) squares. Cut three 31/2" x 42" strips. Crosscut thirty-two 31/2" (B) squares.

Pattern #17962 – BEI1 (bouquet toss): Cut as many 35/8" squares as needed to yield sixteen

triangles (C) with bouquet motifs after the squares have been cut in half once on the diagonal. Only the motif triangles will be used. Sixteen bouquet motif triangles are needed to make sixteen basket blocks.

Pattern #17959 – GOL1, BRO1, GRE1, BLU1 (basket weave):From each colorway: Cut one 31/2" x 42" strip. Crosscut four 31/2" x 61/2" (D) rectangles. Cut one 21/2" x 42” strip. Crosscut eight 21/2" (E) squares. Cut two 11/4" x 42” strips. Crosscut eight 11/4" x 51/2" (F) rectangles.

The basket weave print is directional. Use the arrows as a guide to place the fabric pieces in the correct direction.

1. Diagonally sew one E square on each B square (Figure 25). Trim to 1/4" seam allowance. Press seams open. Blocks should measure 31/2" square. Make four left and four right from each basket weave fabric.

2. Diagonally sew left square units from Step 1 to 31/2" x 61/2" D matching fabric rectangles (Figure 26). Trim to 1/4" seam allowance. Press seams open. Make four from each fabric (Figure 27).

3. Diagonally sew right square units from Step 1 to the D rectangles from Step 2 (Figure 28). Trim to 1/4" seam allowance. Press seams open (Figure 29). Make four from each fabric. Blocks should measure 31/2" x 61/2".

4. Stitch one 11/4" x 51/2" F rectangle to the right side of each C triangle (Figure 30). Press toward F. Do not trim F. Make four from each fabric.

Round Two: DOGTOOTH STRIPPattern #17961 – DKBLU1 (pin dot): Cut four 31/2" x 42" strips. Crosscut twenty 31/2" x 61/2"

rectangles (A) and four 31/2" squares (B).Pattern #17962 – BEI1 (bouquet toss): Cut four 31/2" x 42" strips. Crosscut forty 31/2" squares (C).

1. Diagonally sew one C square on each A rectangle as shown in Figure 12. Trim to 1/4" seam allowance. Press seams open. Repeat on opposite side (Figure 13). Blocks should measure 31/2" x 61/2".

2. Sew fi ve Dogtooth units from Step 1 together (Figure 14). Make four strips. Press seams open. Strips should measure 31/2" x 301/2".

3. Refering to Figure 16, sew two Dogtooth strips to the sides of the quilt top. Press toward center of the quilt.

4. Sew a B square to each end of the two remaining Dogtooth strips (Figure 15). Press toward B.

5. Sew the strips to the top and bottom of the quilt (Figure 16). Press toward center of the quilt. Quilt top should measure 361/2" square.

Round Three: STRIPS & SMALL 9-PATCH BLOCKSPattern #17960 – RED1 (stripe): Cut four 11/2" x 42"

strips (A). Cut one 11/2" x 42" strip. Crosscut two 11/2" x 15" (C) strips and one 11/2" x 8" (D) strip.

Pattern #17961 – GOL1 (pin dot): Cut eight 11/2" x 42" strips (B).Pattern #17961 – BEI1 (pin dot): Cut one 11/2" x 42" strip. Crosscut

two 11/2" x 8" (E) strips and one 11/2" x 15" (F) strip.

1. Sew one A and two B strips together (Figure 17). Press toward A. Cut the length of each strip set to measure 31/2" x 361/2". Make four.

2. Sew one F and two C strips together (Figure 18). Press seams toward C. Crosscut eight 11/2" C/F/C units (Figure 19).

3. Sew one D and two E strips together (Figure 20). Press toward D. Crosscut four 11/2" E/D/E units (Figure 21).

4. Sew two C/F/C units and one E/D/E unit together (Figure 22). Press seams open. Blocks should measure 31/2" square.

5. Sew two B/A/B strip sets to the left and right side of the quilt top (Figure 24). Press toward the strip set.

Dogtooth Unit Finished size: 3˝ x 6˝Make twenty.

Small 9-Patch BlockFinished size: 3˝ square.Make four.

Figure 16

Figure 23Make two.

Figure 24

Basket BlockFinished size: 6˝Make four of each color.

Make four.Figure 14

Figure 18 Figure 19C

CF

Make four.Figure 17

AB

B

Make two.

Figure 15

B

Figure 25

B

E

Figure 30

C F

Make twenty.

Figure 12 Figure 13

AC

Figure 20 Figure 21

E

ED

Figure 22Make four.

Figure 26 Figure 27

Figure 28 Figure 29

D

5. Stitch one 11/4" x 51/2" F rectangle to the left side of each C triangle (Figure 31). Press toward F. Trim F even with the C triangle (Figure 32). Make four from each fabric.

6. Cut one 4" A square diagonally into two triangles. Position one triangle on a motif unit as shown in Figure 33. Stitch and press toward A. Repeat on the left side (Figure 34). Block should measure 3½" x 6½". Make four from each fabric.

7. Stitch the top and bottom basket units together. Press seams away from the basket handle (Figure 35). Trim blocks if needed. Blocks should measure 61/2" square. Make fourfrom each fabric.

8. Refering to the cover photo, stitch four basket blocks and three 61/2" motif squares together. Press seams away from the basket blocks. Make two. Stitch to the sides of the quilt center. Press toward the quilt center.

9. Refering to the cover photo, stitch four baskets and fi ve 61/2" motif squares together. Press seams away from the basket blocks. Make two. Stitch to the top and bottom of the quilt center. Press. Quilt should measure 541/2" square.

CORNER APPLIQUÉ BLOCKPattern #17961 – GOL1 (pin dot): fl owersPattern #17961 – BLA1 (pin dot): fl ower centersPattern #17960 – GRE1 (stripe): leavesPattern #17961 – DKGRE1 (pin dot): leavesPattern #17961 – BEI1 (pin dot): Cut one 61/2" x 42" strip. Crosscut four 61/2" squares.

1. Prepare the appliqué shapes for the corner blocks using your favorite method.

2. Appliqué one fl ower and leaf motif to each 61/2" square by hand or machine.

BORDERS & BINDINGPattern #17961 – RED1 (pin dot): Cut six 11/2" x 42" strips (inner border).Pattern #17957 – BEI1 (border print): Cut four 61/2" x 561/2" strips (outer border).Pattern #17960 – RED1 (stripe): Cut eight 3" x 42" strips for binding.

1. Stitch the 11/2" x 42" inner border strips together end to end. Cut into two 541/2" lengths and two 561/2" lengths. Stitch the 541/2" strips to the sides of the quilt. Press seams toward the border strips. Stitch the 561/2" strips to the top and bottom of the quilt. Press seams toward the border strips.

2. Stitch two 61/2" x 561/2" outer border strips to the sides of the quilt. Press toward the outer border.

3. Stitch appliqué corner blocks to the ends of the two remaining border strips. Press toward the border strips. Stitch to the top and bottom of quilt. Press toward the outer border.

FINISHING1. Prepare backing to measure 74" square.2. Layer backing, batting, and quilt top. Baste layers together.3. Hand or machine quilt.4. Trim layers even.5. Join binding strips with diagonal seams. Press seams open. Bind using your

favorite method.

Corner Appliqué BlockFinished size: 6˝Make four.

Figure 35

©2008 Red Rooster Fabrics. All rights reserved. Not intended for individual resale.The design for this Red Rooster Fabrics’ pattern is protected by U.S. copyright law.

For additional copies of this pattern please call or write Red Rooster Fabrics at the address listed below.253 West 35th Street, 11th Floor, New York, NY 10001 • 401.728.4200 • www.redroosterfabrics.com

Corner AppliquéMake four.

Enlarge 200%

Figure 31 Figure 32

Figure 33 Figure 34

Center AppliquéMake one.

Enlarge 200%

Dress

Dress

CapeCape

Lower C

ape