f73098_67c5d39c083de7e0ac0c3cea19a44702.pdf
-
Upload
michelle-harris -
Category
Documents
-
view
13 -
download
2
description
Transcript of f73098_67c5d39c083de7e0ac0c3cea19a44702.pdf
Russian Academy of Sciences
Russian Foundation for Basic Research
Mechanical Engineering Research Institute
Russian Academy of Sciences
Russian Foundation for Basic Research
Mechanical Engineering Research Institute of the RAS
PRELIMENARY PROGRAM (as of March 15, 2013)
New Trends in Fatigue and Fracture
(NT2F13)
Moscow, May 13-16, 2013
SCIENTIFIC COMMITTEE
Yury G. MATVIENKO (Chairman), Mechanical Eng Research Inst of the Russian
Academy of Sciences, Moscow, Russia
Rivner F. GANIEV (Honorary chairman), Mechanical Eng Research Inst of the
Russian Academy of Sciences, Moscow, Russia
Zitouni AZARI, Université de Metz, France
Lajos BORBAS, Budapest University of Technology and Economics, Hungary
Taoufik BOUKHAROUBA, Algeria
Nenad GUBELJAK, Univ of Maribor, Slovenia
Paolo LAZZARIN, Università di Padova, Italy
Nikolay A. Makhutov, Mechanical Eng Research Inst of the Russian Academy of
Sciences, Moscow, Russia
Liviu MARSAVINA, Politehnica University of Timisoara, Romania
Lj. MILOVIC, Univ of Belgrade, Serbia
Moussa NAIT-ABDELAZIZ, Université de Lille 1, France
Volodymyr PANASYUK, Physico-Mechanical Institute of NASU, Ukraine
Carmine PAPPALETTERE Politecnico di Bari, Italy
Guy PLUVINAGE, Université de Metz, France
Dmitry O.REZNIKOV, Mechanical Eng Research Inst of the Russian Academy of
Sciences, Moscow, Russia
Jesus TORIBIO, University of Salamanca, Spain
Cetin M. SONSINO Fraunhofer Institute for Structural Durability, Germany
ORGANIZING COMMITTEE
Yury G. MATVIENKO (Chairman), Mechanical Eng Research Inst of the Russian
Academy of Sciences, Moscow, Russia
Moussa NAIT-ABDELAZIZ, Université de Lille 1, France
Rafael Yu. SOUKHORUKOV, Mechanical Eng Research Inst of the Russian
Academy of Sciences, Moscow, Russia
Dmitry O. REZNIKOV, Mechanical Eng Research Inst of the Russian Academy of
Sciences, Moscow, Russia
Tamara V.SILOVA, Mechanical Eng Research Inst of the Russian Academy of
Sciences, Moscow, Russia
CONFERENCE TOPICS
I. Multi-scale Models and Criteria
• nano, micro, meso and macro levels
• experimental methods and numerical modeling
• multiaxial/mixed mode fracture and fatigue
• transferability of models and criteria
II. Characterization of Crack/Notch Tip Stress Fields
• experimental technique
• numerical modeling
• constraint and effect of non-singular terms
• mixed mode fracture and fatigue
III. Structural Integrity and Engineering Safety
• structural integrity assessment
• reliability and risk analysis
• non-destructive evaluation of structural components
• structural materials ageing
• environmental and hydrogen embitterment effect
• residual stress
IV. Fracture Mechanics and Fatigue in Design and Technology
• codes and standards
• lifetime extension
• application in geomechanics and geotechnology
New Trends in Fatigue and Fracture (NT2F13) 13-16 May 2013, Moscow, RUSSIA
Mechanical Engineering Research Institute. Conference hall.
(4, Maly Kharitonievsky lane, Moscow, Russia)
Monday, May 13, 2013
17.00 – 18.00 Registration
18.00 Welcome party
Tuesday, May 14, 2013
9.00-10.00 Registration
10.00-10.30 Opening remarks. Director of the Mechanical Engineering
Research Institute, academician R. Ganiev.
10.30-14.00 Session I. Multi-scale Models and Criteria
Chairman: professor Yu. Matvienko
10.30-11.00 Plenary lecture
Jesús Toribio, Viktor Kharin. Continuum Modelling of Trap-
Affected Hydrogen Diffusion in Metals.
11.00-11.20 O. Plekhov, A. Fedorova, I. Panteleev, M. Bannikov.
Experimental Study of Strain Localization and Energy
Dissipation at Fatigue Crack Tip.
11.20-11.40 Vinko Mocilnik, Nenad Gubeljak, Jozef Predan. Retardation of
Micro-crack Initiation at Mechanical Components Subjected by
Torsion Loading Using a Discrete Dislocation Technique.
11.40-12.00
Coffee brake
Chairman: professor Naït Abdelaziz
12.00-12.20 Plenary lecture
R.V. Goldstein, N.M.Osipenko. Some Models of Structures of
Fracture Formation and Growth.
12.20-12.40 A.V.Bialonovich, L.E.Matokhniuk. Determination of the Damage
Degree of Metallic Materials under Cyclic Loading from the
Surface Structure Image.
12.40-13.00 K.V. Zakharchenko, V.I. Kapustin, E.A. Maksimovsky. Physical
Phenomena Occurring under Periodic Straining of Metal Alloys.
13.00-13.20 Napo BONFOH, Hafid SABAR. Exact Solution of the Coated
Inclusion Problem.
13.20-13.40 K.B. Ustinov. On Propagation of Interface Cracks Parallel to Free
Boundaries and Delamination of Coatings.
13.40-14.00 A. N. Romanov. Criterion of Fatigue Fracture of Metal Materials.
14.00 – 15.00 Lunch
15.00-18.30 Session II Characterization of Crack/Notch Tip Stress Fields
Chairman: professor G. Pluvinage
15.00-15.30 Plenary lecture
A. Hamdi, M. Naït Abdelaziz, F. Zaïri. Review of Elastomer
Fracture Criteria under Multiaxial Loadings.
15.30-15.50 A. Fedorova, O. Plekhov Calculation of Plastic J-Integral Based
on Infrared Thermography Data.
15.50-16.10 V.N.Shlyannikov, N.V.Boychenko. Experimental Study of the
Fracture Damage Zone Size.
16.10-16.30 Andrej Likeb, Nenad Gubeljak, Jožef Predan, Yury Matvienko
Determination of ETA Factor for Pipe-Ring Specimens
16.30-16.50
Coffee-break
Chairman: Professor J. Toribio
16.50-17.10 Plenary lecture
V.V. Panasyuk, H.M. Nykyforchyn. A Role of Hydrogen in the
Degradation of Pipeline Steels.
17.10-17.30 T.Bellahcene, J. Capelle, M.Aberkane, Z. Azari. Hydrogen
Embrittlement of Pipeline Steel API 5L X70.
17.30-17.50 Y. G. Matvienko, V.S. Pisarev, A.V. Chernov, S.I. Eleonsky.
Combined Implementing the Crack Compliance Method and
Speckle Interferometry for a Determination of Fracture
Mechanics Parameters.
17.50-18.10 M.Ben Hassine, F. Zairi, M.Nait Abdelaziz, X. Colin. Effects of
Thermal Aging on Fracture Properties of Rubbers.
18.10-18.30 M. Hadj Meliani, Z. Azari, G.Pluvinage, Y. Matvienko.
Application of the Equivalent Notch Stress Intensity Factor on
the Brazilian Disk with U and V-Notches.
Wednesday, May 15, 2013
10.00-11.50 Session III. Structural Integrity and Engineering Safety
Chairman: Professor V.N. Slyannikov
10.00-10.30 Plenary lecture
N.A. Makhutov. Risk Analysis for Large-Scale Catastrophes.
10.30-10.50 D.O. Reznikov. Standard Based, Probabilistic and Risk Based
Approaches to Ensuring Safety of Technical Systems.
10.50-11.10 E.I. Shifrin, P.S. Shushpannikov. Application of the Reciprocity
Gap Functional Method for Identification of Small Well-
Separated Defects in an Isotropic Elastic Body Using the Results
of One Static Test.
11.10-11.30 R. Zaynetdinov, I. Gadolina. Multi-Scale Model and Wavelet
Analysis of a Sequence of Critical Events.
11.30-11.50 V.V. Mokryakov. Regimes of Fracture Initiation in a Plane with
Square Lattice of Circular Holes Under Uniaxial Compression.
11.50-12.10 Кофе брейк
Session IV Mechanisms and Models of Fatigue
Chairman: Professor R.V.Goldstain
12.10-12.30 Plenary lecture
A.Shanyavskiy, A. Nikitin. Very-High-Cycle-Fatigue Mechanisms
in Metals.
12.30-12.50 G. Pisarenko, O. Voinalovich, and A. Mailo. Damageability and
the Сyclic Life of an Aluminum Alloy at the High-Cycle Fatigue
12.50-13.10 L. Reis, V. Anes, B. Li, M. de Freitas. The Shear Stress Space
Influence in Multiaxial Fatigue Life Evaluation.
13.10-13.30 Said Taheri, Ludovic Vincent, Lakhdar, Taleb Jean-Christophe Le
Roux. A Conservative Damage Accumulation Method for the
Prediction of Crack Nucleation Under Variable Amplitude
Loading for Austenitic Stainless Steel.
13.30-13.50 A. Belloula, A. Amrouche, M. Nait Abdelaziz, N. Benseddiq.
Prediction of Fretting Fatigue Life of an Aluminium Alloy Using
Multiaxial Fatigue Criteria
13.50-14.10 V.N.Slyannikov, A.P. Zakharov. Fatigue Crack Growth in
Cruciform Specimens under Biaxial Loading.
14.10 – 15.00 Lunch
15.00-18.10 Session V Fracture Mechanics and Fatigue in Design and
Technology
Chairman: professor Nenad Gubeljak
15.00-15.30 Plenary lecture
G. Pluvinage, J. Capelle, Z.Azari. Design Based on Brittle
Ductile Transition Temperature for API X65 Steel Used for
Hypercritical CO2 Transport.
15.30-15.50 Popescu, R. M. Negriu, S. G. Badea, C. Besleaga. Considerations
on the Use of FEM in Pressure Equipment Design.
15.50-16.10 D. Sersab and M. Aberkane. Recovering of the Mechanical
Properties of a Pehd Plate Containing a Notch by the Grinding
Technique.
16.10-16.30 B. Žužek, F. Vodopivec, R. Celin, M. Godec. Effect of Ageing on
hardness, CV toughness and fracture of FeNiCrMo Alloys.
16.30-16.50 Coffee-break
16.50-17.10 Plenary lecture
C.A.Rodopoulos and R. Jones. Separating and Investigating the
Effects of Controlled Shot Peening on the Fatigue Life of 2024-
T351 Aluminum Alloy.
17.10-17.30 C. Barile, C. Casavola, G. Pappalettera, C. Pappaletter.
Discussion on the Thermal Field Produced by Laser Annealing
for the Residual Stress Relaxation.
17.30-17.50 M.G.Chausov, V. B.Berezin, P.Pylypenko. Evolution of the
Deformation Field on the Surface of Sheet Plastic Materials at
Dynamic Nonequilibrium Processes.
18.10-18.10 E.M. Morozov. Fracture Toughness for a Stress State with Non
Square Root Singularity at the Crack Tip.
19-00 Conference dinner
Thursday May 16, 2013
Session VI Mechanisms and Models of Deformation and Fracture
Chairman: Professor H.M. Nykyforchyn
10.00-10.30 Plenary lecture
10.30-10.50 A.M.Dumansky, M.A.Alimov, L.P.Tairova. Analysis of Long Term
Deformation of Carbon Fiber Reinforced Plastics.
10.50-11.10 A. N. Polilov, N. A. Tatous. Computer Modelling of Optimal Fibre
Trajectories around Holes or Notches in shaped FRP (Fiber
Reinforced Plastics) Structure Elements with Curvilinear
Anisotropy.
11.10-11.30 V. M. Kornev. A Model for Fatigue Crack Growth with a Variable
Stress. Description in Terms of Crack Mechanics.
11.30-12.00 Кофе брейк
Poster presentations session
A.M.Bolshakov, M.I. Zakharova. The Statistical Analysis of
Emergence Reasons and Development of Accidents on the
Dangerous Objects Working at Low Temperatures by Method of
FT and ET.
E.V.Zenkov. Laboratory Simulation of the Type of Stress State
on the Prismatic Specimen.
I.M. Petrova, I.V. Gadolina. Fatigue Damage Summation in
Very High Loading Cycle Domain and Under Natural Ageing.
E.M.Benevolenskaja, I.V.Gadolina, I.M.Petrova,
E.V.Shashkova. Life Distribution Estimation of Freight Car Bogie
Side Frame under Various Methods of Loading Amplitude
Approximation.
O.Skvorcov. Estimation of Vibrating Durability of Elements
of Hydro Power Turbines under Operating Conditions by Results
of Vibration Control by Stationary Systems of Vibrating
Monitoring.
A.M.Bolshakov. New Criteria and Estimation Methods of
Constructions Brittle Fractures of the North.
A. N. Polilov, N. A. Tatous. Crack Arrest by Weak Interface
and Optimal Elastic-Strength Properties of Fiber Reinforced
Plastics for Stress Concentration Conditions.
A. N. Polilov, N. A. Tatous. Energy Fracture Criterion for
Growth of Splitting and Delamination Cracks in Fiber Reinforced
Plastics Laminates.
R.R.Yarullin, A.P. Zakharov, R.A.Sitdikov. Assessment of Disk
and Blade Rivet Attachment Reliability after Applying Repair
Technology.
R.S. Akhmetkhanov. Incorporation of Structural Properties of
Technical Systems into the Framework of Risk Analysis and
Safety Management
D.O. Reznikov, V.P. Petrov. Assessment of Vulnerability and
Robustness of Complex Technical Systems
12.00-14.00 Round table: Lifetime Extension, Design of Machines and
Structures based on Modern Approaches of Fracture Mechanics
and Survivability
Chairman – Yu. Matvienko
Development of the joint research program
Closing ceremony
14.00-15.00 Lunch
15.00 – 20.00 Tourist tour