F35 Filter - literature.puertoricosupplier.com
Transcript of F35 Filter - literature.puertoricosupplier.com
4
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F35 Filter
Ordering Information
BOLD ITEMS ARE MOST POPULAR.
F 35 — 02 A H /**
Bowl
A Transparent D Metal without Sight Gauge
W Metal with Wraparound Sight Gauge
Options
S Piston Drain
Element
G 5 Micron
H 20 Micron
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG
Pressure Drop with 20 Micron Element.
Port SizeNPT
Manual Twist Drain Piston Drain
Polyurethane Bowl1/8" F35-01AH F35-01AHS1/4" F35-02AH F35-02AHS
Zinc Bowl / Sight Gauge
1/8" F35-01WH F35-01WHS1/4" F35-02WH F35-02WHS
QUBE 35 Series Filters1/8 & 1/4 Inch Ports
Engineering Change Designator
Will be entered at factory.
Features• Compact Size Allows Greater Design Flexibility
• Nearly Double the Flow Capacity of Standard Miniature Filters; Reduces Costly Pressure Drop
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Excellent Water Removal Efficiency
• Unique Deflector Plate that Creates Swirling of the Air Stream Ensuring Maximum Water and Dirt Separation
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• 20 Micron Filter Element Standard, 5 Micron Available
• Transparent Polyurethane Bowl Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Piston Drain
• Large Bowl Capacity
• High Flow: 1/8" - 32 SCFM§
1/4" - 38 SCFM§
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Port Size
01 1/8 Inch 02 1/4 Inch
Port Threads
— NPT G BSPP
Catalog 0304-2
F35 Series
5
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
CG
D
B
A
F E
0
1
2
3
4
5
0 5 10 15 20 25 30
Rated Flow - SCFM
0 105
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsF35-01AH
1/8 Inch Ports
0
1
2
3
4
5
0 5 10 15 20 25 30 35 40
Rated Flow - SCFM
0 105 15
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsF35-02AH
1/4 Inch Ports
Technical Information
F35 Filter Kits & AccessoriesBowl Kits – Polyurethane (A) ................................................................. BKF35A Zinc (D) ...............................................................................BKF35D Zinc (W) Wraparound Sight Gauge ................................... BKF35W
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Piston (Max. Pressure: 175 PSIG) ........................................ PKF35 Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ....................................................................EK504VY 20 Micron (All) .................................................................... EK504Y
Face Mounting Bracket Kit (See Page 35) .....................SAR35Y57
Repair Kit – Deflector, Retainer (All) ........................................................ RFK30
SpecificationsBowl Capacity ...................................................................1.5 Ounce
Port Threads ...................................................................1/8, 1/4 Inch
Pressure & Temperature Ratings – Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Piston Drain ......................175 PSIG Max. Press. (11.9 bar) 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar)
With Piston Drain ......................175 PSIG Max. Press. (11.9 bar) 40°F to 150°F (4.4°C to 65.6°C)
Weight – Polyurethane Bowl .......................................... 0.7 lb. (0.3 kg) / Unit 18.9 lb. (8.6 kg) / 24-unit Master Pack
Zinc Bowl ........................................................ 0.9 lb. (0.4 kg) / Unit 23.9 lb. (10.8 kg) / 24-unit Master Pack
Zinc Bowl W/ Sight Gauge ............................ 0.96 lb. (0.4 kg) / Unit 25.1 lb. (11.4 kg) / 24-unit Master Pack
Materials of ConstructionBody .............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Drains ....................................................................................... Brass
Filter Elements ............................................................Polypropylene
Seals .......................................................................................... Nitrile
QUBE 35 SeriesFilters
F35 Filter Dimensions
A B C D E F G
F35-AH, F35-DH
1.59 (40.5)
1.59 (40.5)
0.81 (20.6)
4.25 (107.9)
0.80 (20.2)
1.31 (33.3)
0.58 (14.7)
F35-WH
1.59 (40.5)
1.59 (40.5)
0.81 (20.6)
4.27 (108.3)
0.80 (20.2)
1.31 (33.3)
0.58 (14.7)
Inches (mm)
Catalog 0304-2
Technical Specifications – F35
6
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F75 Filter
Ordering Information
F 75 — 03 B J /**
QUBE 75 Series Filters1/4, 3/8 & 1/2 Inch Ports
Element
G 5 Micron J 40 Micron
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port Size
02 1/4" 03 3/8" 04 1/2"
Port Threads
– NPT G BSPP
BOLD ITEMS ARE MOST POPULAR.
Features• Compact Size Allows Greater Design Flexibility
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Excellent Water Removal Efficiency
• For Applications Requiring Minimum Pressure Drop
• Unique Deflector Plate that Creates Swirling of the Air Stream Ensuring Maximum Water and Dirt Separation
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• 40 Micron Filter Element Standard, 5 Micron Available
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Auto Float Drain
• Large Bowl Capacity
• High Flow: 1/4" - 43 SCFM§
3/8" - 1/2" - 73 SCFM§
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Engineering Change Designator
Will be entered at factory.
Options R Automatic Float
Drain
Port SizeNPT
Manual Twist Drain Piston Drain
Polyurethane Bowl / Plastic Guard1/4" F75-02BJ F75-02BJR3/8" F75-03BJ F75-03BJR1/2" F75-04BJ F75-04BJR
Zinc Bowl / Sight Gauge
1/4" F75-02WJ F75-02WJR
3/8" F75-03WJ F75-03WJR1/2" F75-04WJ F75-04WJR
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG
Pressure Drop with 40 Micron Element.
Catalog 0304-2
F75 Series
7
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
CG
D
B
A
F E
0
1
2
3
4
5
0 10 20 30 40 50 60
Rated Flow - SCFM
0 105 20 2515
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsF75-02BJ
1/4 Inch Ports
F75 Filter Kits & AccessoriesBowl Kits – Polyurethane (B) ................................................................ BKF55B Metal (D) ........................................................................... BKF55D Metal (W) Wraparound Sight Gauge ................................ BKF55W
Drain Kits – Internal Auto (Max. Pressure: 175 PSIG) (B & D) ........... SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ............... SAF105MD Manual Twist Drain ....................................................... SA600Y7-1 Semi-Automatic “Overnight” Drain ....................................SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ....................................................................... EK55G 40 Micron (All) ...................................................................... EK55J
Face Mounting Bracket Kit (See Page 37) .....................SAR75Y57
Repair Kits – Deflector, Retainer ................................................................RFK55 Internal Float Drain ......................................................... RK602MD
SpecificationsBowl Capacity .................................................................. 3.8 Ounce
Port Threads ........................................................... 1/4, 3/8, 1/2 Inch
Pressure & Temperature Ratings – Polyurethane Bowl .............................0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52 °C)
Zinc Bowl ...........................................0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Automatic Float Drain ........ 175 PSIG Max. Press. (11.9 bar 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge .................0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain ....... 175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ...................................... 1.25 lb. (0.57 kg) / Unit 25 lb. (11.3 kg) / 20-unit Master Pack
Zinc Bowl .................................................... 1.50 lb. (0.68 kg) / Unit 30 lb. (13.6 kg) / 20-unit Master Pack
Zinc Bowl W/ Sight Gauge .......................... 1.60 lb. (0.73 kg) / Unit 32 lb. (14.5 kg) / 20-unit Master Pack
Materials of ConstructionBody ............................................................................................Zinc
Bowls .............................................................................Polyurethane Metal (Zinc)
Drains .......................................................................................Brass
Filter Elements ..............................................................Polyethylene
Seals ..........................................................................................Nitrile
Technical Information
0 10 20 30 40 50 60 70 80 90
Rated Flow - SCFM
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0 2010 30 40
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Flow - dm /s3
n
Flow CharacteristicsF75
3/8 & 1/2 Inch Ports
QUBE 75 SeriesFilters
F75 Filter Dimensions
A B C D E F G
F75-BJ, F75-DJ
2.19 (55.6)
2.19 (55.6)
1.01 (25.4)
5.19 (131.8)
1.09 (27.8)
1.66 (42.1)
0.70 (17.9)
F75-WJ
2.19 (55.6)
2.19 (55.6)
1.01 (25.4)
5.31 (134.9)
1.09 (27.8)
1.66 (42.1)
0.70 (17.9)
Inches (mm)
Catalog 0304-2
Technical Specifications – F75
8
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F105 Filter
Ordering Information
F 105 — 04 B J /**
Port Size
04 1/2" 06 3/4"
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port Threads
— NPT G BSPP
Options
R Automatic Float Drain
Element
G 5 Micron J 40 Micron
Port SizeNPT
Manual Twist Drain Automatic Float Drain
Polyurethane Bowl / Plastic Guard1/2" F105-04BJ F105-04BJR3/4" F105-06BJ F105-06BJR
Metal Bowl / Sight Gauge1/2" F105-04WJ F105-04WJR3/4" F105-06WJ F105-06WJR
QUBE 105 Series Filters1/2 & 3/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Features• Connects to Other QUBE Units Using Just Screws
and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Excellent Water Removal Efficiency
• For Applications Requiring Minimum Pressure Drop
• Unique Deflector Plate that Creates Swirling of the Air Stream Ensuring Maximum Water and Dirt Separation
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• 40 Micron Filter Element Standard, 5 Micron Available
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Auto Float Drain
• Large Bowl Capacity
• High Flow: 1/2" - 120 SCFM§
3/4" - 160 SCFM§
Engineering Change Designator
Will be entered at factory.
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG
Pressure Drop with 40 Micron Element.
Catalog 0304-2
F105 Series
9
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
CG
D
B
A
F E
0 25 50 75 100 125 150
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0 2010 30 40 6050 70
Rated Flow - SCFM
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Flow - dm /s3
n
Flow CharacteristicsF105-04BJ
1/2 Inch Ports
0 50 100 150 200 250
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0 4020 60 80 100
Rated Flow - SCFM
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Flow - dm /s3
n
Flow CharacteristicsF105-06BJ
3/4 Inch Ports
F105 Filter Kits & AccessoriesBowl Kits – Polyurethane (B) ............................................................... BKF105B Metal (D) ...........................................................................BKF105D Metal (W) Wraparound Sight Gauge ............................... BKF105W
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Internal Auto (Max. Pressure: 175 PSIG) (B & D) ............ SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ................SAF105MD Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ....................................................................EKF100G 40 Micron (All) ...................................................................EKF100J
Face Mounting Bracket Kit (See Page 39) ...................SAR105Y57
Repair Kits – Deflector, Retainer .............................................................. RFK100 Internal Float Drain ..........................................................RK602MD
SpecificationsBowl Capacity ...................................................................8.5 Ounce
Port Threads ...................................................................1/2, 3/4 Inch
Pressure & Temperature Ratings – Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Automatic Float Drain ........175 PSIG Max. Press. (11.9 bar 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain .......175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ...................................... 1.10 lb. (0.50 kg) / Unit 10.8 lb. (4.9 kg) / 8-unit Master Pack
Zinc Bowl .................................................... 1.54 lb. (0.70 kg) / Unit 14.3 lb. (6.5 kg) / 8-unit Master Pack
Zinc Bowl W/ Sight Gauge .......................... 1.74 lb. (0.79 kg) / Unit 15.9 lb. (7.2 kg) / 8-unit Master Pack
Materials of ConstructionBody ....................................................................................Aluminum
Bowls ............................................................................. Polyurethane Metal (Zinc)
Drains ....................................................................................... Brass
Filter Elements ............................................................Polypropylene
Seals .......................................................................................... Nitrile
Technical Information
QUBE 105 SeriesFilters
F105 Filter Dimensions
A* A† B C D E F* F† G
F105-BJ, F105-DJ
2.69 (68.3)
3.03 (77.0)
2.69 (68.3)
1.34 (34.1)
6.66 (169.1)
1.35 (34.3)
2.27 (57.6)
2.55 (64.8)
0.88 (22.2)
F105-WJ
2.69 (68.3)
3.03 (77.0)
2.69 (68.3)
1.34 (34.1)
6.66 (169.1)
1.35 (34.3)
2.27 (57.6)
2.55 (64.8)
0.88 (22.2)
Inches (mm)* 3/8 and 1/2 Inch Ports† 3/4 Inch Ports
Catalog 0304-2
Technical Specifications – F105
10
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F31 Coalescing Filter
Ordering Information
F 31 — 02 A H /**
Element
H .01 Micron
Bowl
A Transparent D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port Size
01 1/8" 02 1/4"
Port Threads
— NPT G BSPP
QUBE 31 Series Coalescing Filters1/8 & 1/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Features• Compact Size Allows Greater Design Flexibility
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Removes Oil and Water Aerosols, as Well as Particulate Matter Down To 0.01 Micron.
• Pleated Element for Longer Life and Lower Pressure Drop
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• Activated Carbon Elements Available for Oil Vapor Removal
• Transparent Polyurethane Bowl Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Piston Drain
• Large Bowl Capacity
• High Flow: 1/8" & 1/4" - 20 SCFM§
Engineering Change Designator
Will be entered at factory.
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Options
S Piston Drain
Port SizeNPT
Manual Twist Drain Piston Drain
Polyurethane Bowl1/8" F31-01AH F31-01AHS1/4" F31-02AH F31-02AHS
Zinc Bowl / Sight Gauge
1/8" F31-01WH F31-01WHS1/4" F31-02WH F31-02WHS
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG Pressure Drop.
Catalog 0304-2
F31 Series
11
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
0
1
2
3
4
5
0 5 10 15 20 25 30 35
Rated Flow - SCFM
0 105 15
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsF31
1/8 & 1/4 Inch Ports
Technical Information
F31 Coalescing Filter Kits & AccessoriesBowl Kits – Polyurethane (A) ................................................................. BKF35A Zinc (D) ...............................................................................BKF35D Zinc (W) Wraparound Sight Gauge ................................... BKF35W
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Piston (Max. Pressure: 175 PSIG) ....................................RK504SY Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – Activated Carbon ................................................................ EKF31A Coalescing ............................................................................ EKF31
Face Mounting Bracket Kit (See Page 35) ......................SAR35Y57
SpecificationsBowl Capacity ...................................................................1.5 Ounce
Port Threads ...................................................................1/4, 3/8 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Piston Drain .......................175 PSIG Max. Press. (11.9 bar 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar)
With Piston Drain ......................175 PSIG Max. Press. (11.9 bar) 40°F to 150°F (4.4°C to 65.6°C)
Weight – Polyurethane Bowl ........................................ 0.7 lb. (0.31 kg) / Unit 7 lb. (3.18 kg) / 24-unit Master Pack
Zinc Bowl ...................................................... 0.9 lb. (0.41 kg) / Unit 23.9 lb. (10.8 kg) / 24-unit Master Pack
Zinc Bowl W/ Sight Gauge .......................... 0.96 lb. (0.44 kg) / Unit 25.1 lb. (11.4 kg) / 24-unit Master Pack
Materials of ConstructionBody .............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Coalescing Element ................Borosilicate Fiber & Polyamide Foam
Carbon Element ..............Acetal 30% Glass Filled Activated Carbon
Drain ......................................................................................... Brass
Seals ....................................................................................... Buna-N
QUBE 31 SeriesCoalescing Filters
Inches (mm)
CG
D
B
A
F E
F31 Filter Dimensions
A B C D E F G
F31-AH, F31-DH
1.59 (40.5)
1.59 (40.5)
0.81 (20.6)
4.25 (107.9)
0.80 (20.2)
1.31 (33.3)
0.58 (14.7)
F31-WH
1.59 (40.5)
1.59 (40.5)
0.81 (20.6)
4.27 (108.3)
0.80 (20.2)
1.31 (33.3)
0.58 (14.7)
Catalog 0304-2
Technical Specifications – F31
12
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F71 Coalescing Filter
Ordering Information
F 71 — 03 B J /**
Port Size
02 1/4" 03 3/8" 04 1/2"
Port Threads
— NPT G BSPP
Options
R Automatic Float Drain
Element
J .01 Micron
QUBE 71 Series Coalescing Filters1/4, 3/8 & 1/2 Inch Ports
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG
Pressure Drop.
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
BOLD ITEMS ARE MOST POPULAR.
Features• Compact Size Allows Greater Design Flexibility
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Removes Oil and Water Aerosols, as Well as Particulate Matter Down To 0.01 Micron.
• Pleated Element for Longer Life and Lower Pressure Drop
• Integral Pop-up Style Element Service Life Indicator
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• Activated Carbon Elements Available for Oil Vapor Removal
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Auto Float Drain
• Large Bowl Capacity
• High Flow: 1/4", 3/8", 1/2" - 43 SCFM§
Engineering Change Designator
Will be entered at factory.
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Port SizeNPT
Manual Twist Drain Piston Drain
Polyurethane Bowl / Plastic Guard1/4" F71-02BJ F71-02BJR3/8" F71-03BJ F71-03BJR1/2" F71-04BJ F71-04BJR
Zinc Bowl / Sight Gauge
1/4" F71-02WJ F71-02WJR
3/8" F71-03WJ F71-03WJR1/2" F71-04WJ F71-04WJR
Catalog 0304-2
F71 Series
13
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
CG
D
B
A
F E
QUBE 71 SeriesCoalescing Filters
Technical Information
F71 Coalescing Filter Kits & AccessoriesBowl Kits – Polyurethane (B) ................................................................. BKF55B Metal (D) ............................................................................BKF55D Metal (W) Wraparound Sight Gauge ................................. BKF55W
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Internal Auto (Max. Pressure: 175 PSIG) (B & D) ............ SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ................SAF105MD Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – Activated Carbon ................................................................ EKF71A Coalescing ............................................................................ EKF71
Face Mounting Bracket Kit (See Page 37) ......................SAR75Y57
Repair Kits – Internal Float Drain ..........................................................RK602MD
SpecificationsBowl Capacity ...................................................................3.8 Ounce
Port Threads ............................................................1/4, 3/8, 1/2 Inch
Pressure & Temperature Ratings – Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
0 105 15
0 5 10 15 20 25 30 350
1
2
3
4
5
Rated Flow - SCFM
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsF71
1/4, 3/8 & 1/2 Inch Ports
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Automatic Float Drain ........175 PSIG Max. Press. (11.9 bar 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain .......175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ...................................... 1.25 lb. (0.57 kg) / Unit 25 lb. (11.3 kg) / 20-unit Master Pack
Zinc Bowl .................................................... 1.50 lb. (0.68 kg) / Unit 30 lb. (13.6 kg) / 20-unit Master Pack
Zinc Bowl W/ Sight Gauge .......................... 1.60 lb. (0.73 kg) / Unit 32 lb. (14.5 kg) / 20-unit Master Pack
Materials of ConstructionBody .............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Coalescing Element ................Borosilicate Fiber & Polyamide Foam
Carbon Element ..............Acetal 30% Glass Filled Activated Carbon
Drain ......................................................................................... Brass
Seals ....................................................................................... Buna-N
F71 Coalescing Filter Dimensions
A B C D E F G
F71-BJ, F71-DJ
2.19 (55.6)
2.06 (52.4)
1.72 (43.7)
6.91 (175.4)
1.03 (26.2)
1.66 (42.1)
0.71 (17.9)
F71-WJ
2.19 (55.6)
2.06 (52.4)
1.72 (43.7)
7.16 (181.8)
1.03 (26.2)
1.63 (41.3)
0.71 (17.9)
Inches (mm)
Catalog 0304-2
Technical Specifications – F71
14
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
AutomaticDrain
ManualDrain
F101 Coalescing Filter
Ordering Information
F 101 — 04 B J /**
Options
R Automatic Float Drain
Port Size 04 1/2" 06 3/4"
Port Threads
— NPT G BSPP
Element
J .01 Micron
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG
Pressure Drop.
BOLD ITEMS ARE MOST POPULAR.
QUBE 101 Series Coalescing Filters1/2 & 3/4 Inch Ports
Engineering Change Designator
Will be entered at factory.
Features• Connects to Other QUBE Units Using Just Screws
and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Removes Oil and Water Aerosols, as Well as Particulate Matter Down To 0.01 Micron.
• Pleated Element for Longer Life and Lower Pressure Drop
• Integral Pop-up Style Element Service Life Indicator
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• Activated Carbon Elements Available for Oil Vapor Removal
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Auto Float Drain
• Large Bowl Capacity
• High Flow: 1/2", 3/4" - 85 SCFM§
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Port SizeNPT
Manual Twist Drain Automatic Float Drain
Polyurethane Bowl / Plastic Guard1/2" F101-04BJ F101-04BJR3/4" F101-06BJ F101-06BJR
Metal Bowl / Sight Gauge
1/2" F101-04WJ F101-04WJR
3/4" F101-06WJ F101-06WJR
Catalog 0304-2
F101 Series
15
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C
G
D
B
A
F E
0 20 40 60 80 100 120 140
0 4020 603010 50
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Rated Flow - SCFM
Flow - dm /s3
n
Flow CharacteristicsF101
1/2 & 3/4 Inch Ports
F101 Coalescing Filter Kits & Accessories Bowl Kits – Polyurethane (B) ............................................................... BKF105B Metal (D) ...........................................................................BKF105D Metal (W) Wraparound Sight Gauge ............................... BKF105W
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Internal Auto (Max. Pressure: 175 PSIG) (B & D) ............ SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ................SAF105MD Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – Activated Carbon .............................................................. EKF101A Coalescing .......................................................................... EKF101
Face Mounting Bracket Kit (See Page 39) ....................SAR105Y57
Repair Kits – Deflector, Element, Retainer .............................................. RFK100 Internal Auto Drain ...........................................................RK602MD
SpecificationsBowl Capacity ...................................................................8.5 Ounce
Port Threads ...................................................................1/2, 3/4 Inch
Pressure & Temperature Ratings – Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 180°F (4.4°C to 82.2°C)
With Automatic Float Drain ........175 PSIG Max. Press. (11.9 bar 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar)
With Automatic Float Drain .......175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ...................................... 1.10 lb. (0.50 kg) / Unit 10.8 lb. (4.9 kg) / 8-unit Master Pack
Zinc Bowl .................................................... 1.54 lb. (0.70 kg) / Unit 14.3 lb. (6.5 kg) / 8-unit Master Pack
Zinc Bowl W/ Sight Gauge .......................... 1.74 lb. (0.79 kg) / Unit 15.9 lb. (7.2 kg) / 8-unit Master Pack
Materials of ConstructionBody .............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Coalescing Element ................Borosilicate Fiber & Polyamide Foam
Carbon Element ..............Acetal 30% Glass Filled Activated Carbon
Drains ....................................................................................... Brass
Seals ....................................................................................... Buna-N
QUBE 101 SeriesCoalescing Filters
Technical Information
F101 Coalescing Filter Dimensions
A* A† B C D E F* F† G
F101-BJ, F101-DJ
2.69 (68.4)
3.03 (77.0)
2.69 (68.4)
2.06 (52.2)
8.59 (218.3)
1.35 (34.3)
2.18 (56.4)
2.55 (64.8)
0.81 (20.6)
F101-WJ
2.69 (68.4)
3.03 (77.0)
2.69 (68.4)
2.06 (52.2)
8.75 (222.6)
1.35 (34.3)
2.18 (56.4)
2.55 (64.8)
0.81 (20.6)
Inches (mm) * 3/8 and 1/2 Inch Ports † 3/4 Inch Ports
Catalog 0304-2
Technical Specifications – F101
16
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
R35 Regulator
Ordering Information
R 35 — 02 C /**
Options
G Gauge K Non-relieving P Panel Mount Nut (Plastic) T Tamperproof Adjustment
Port Size
01 1/8" 02 1/4"
Port Threads
— NPT G BSPP
E
C
G
D
B
AP
USH LOCK
F
Reduced Pressure Range
A 0–25 PSIG B 0–60 PSIG C 0–125 PSIG
QUBE 35 Series Regulators1/8 & 1/4 Inch Ports
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No
Flow Secondary Setting, and 20 PSIG Pressure Drop.
Port SizeNPT
Relieving
Without Gauge 0-125 PSIG Reduced Pressure
1/8" R35-01C
1/4" R35-02C
With Gauge 0-125 PSIG Reduced Pressure
1/8" R35-01CG
1/4" R35-02CG
BOLD ITEMS ARE MOST POPULAR.
Features• Compact Size Allows Greater Design Flexibility
• Nearly Double the Flow Capacity of Standard Miniature Regulators; Reduces Costly Pressure Drop
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Piston Operated for High Flow and Low Pressure Drop
• Panel Mountable
• High Flow: 1/8" - 30 SCFM§
1/4" - 40 SCFM§
Engineering Change Designator
Will be entered at factory.
R35 Regulator Dimensions
A B C D E F G
1.59 (40.6)
1.59 (40.6)
2.98 (75.7)
1.11 (28.2)
0.80 (20.3)
1.31 (33.3)
0.58 (14.6)
Inches (mm)
NOTE: 1.25 Dia. (32mm) hole required for panel mounting.
Catalog 0304-2
R35 Series
17
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
0 5 1510
0 5 10 15 20 25 30 35 400
25
50
75
100
Flow CharacteristicsR35-01C
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
1/8 Inch Ports100 PSIG (6.9 bar) Primary Pressure
Rated Flow - SCFM
Flow - dm /s3
n
QUBE 35 SeriesRegulators
R35 Regulator Kits & AccessoriesCage Kits – A Range............................................................................. CKR35A B & C Range....................................................................CKR35BC
Control Knob ................................................................... R35-0545P
Gauges – 1-1/2" Dial Size, 1/8" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4515N18060
1-1/2" Dial Size, 1/8" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4515N18160
Panel Mounting Bracket Kit (Bonnet Threads) .............. SA161X57
Face Mounting Bracket Kit (See Page 35) .....................SAR35Y57
Panel Mount Nut – Plastic ..............................................................................R05X51-P Aluminum .........................................................................R05X51-A
Repair Kits – Non-Relieving Piston, Valve Assembly .............................. RKR30K Relieving Piston, Valve Assembly .........................................RKR30
SpecificationsGauge Ports (2) .....................................................................1/8 Inch
Port Threads ................................................................ 1/8 & 1/4 Inch
Supply Pressure .......................................300 PSIG Max. (20,4 bar)
Temperature Rating ...........................40°F to 125°F (4.4°C to 52°C)
Weight ............................................................0.82 lbs. (.37 kg) / Unit 19.8 lbs. (8.98 kg) / 24-unit Master Pack
Materials of ConstructionAdjusting Knob ....................................................................... Acetal
Body .............................................................................................Zinc
Bottom Plug ....................................................... Glass-Filled Acetal
Cage .........................................................................................Plastic
Elastomers ............................................................................ Buna-N
Technical Information
0 5 10 15 20
0 5 10 15 20 25 30 35 40 450
25
50
75
100
Flow CharacteristicsR35-02C
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
1/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
Rated Flow - SCFM
Flow - dm /s3
n
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – R35
18
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
R75 Regulator
Ordering Information
Options
G Gauge K Non-relieving P Panel Mount Nut (Plastic) T Tamperproof Adjustment
Port Threads
— NPT G BSPP
C
G
D
B
A
PUSH LOCK
F E
R 75 — 03 C /**
Reduced Pressure Range
A 0–25 PSIG B 0–60 PSIG C 0–125 PSIG
Port Size
02 1/4" 03 3/8" 04 1/2"
QUBE 75 Series Regulators1/4, 3/8 & 1/2 Inch Ports
Bold Items are Most Popular. For other models refer to ordering information below.
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No Flow Secondary Setting, and 20 PSIG Pressure Drop.
Port SizeNPT
Relieving
Without Gauge 0-125 PSIG Reduced Pressure1/4" R75-02C3/8" R75-03C1/2" R75-04C
With Gauge 0-125 PSIG Reduced Pressure1/4" R75-02CG3/8" R75-03CG1/2" R75-04CG
Engineering Change Designator
Will be entered at factory.
Features• Compact Size Allows Greater Design Flexibility
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Diaphragm Operated Design with Balanced Poppet Design for Quick and Accurate Regulation
• Panel Mountable
• High Flow: 1/4" - 25 SCFM§
3/8" - 45 SCFM§ 1/2" - 60 SCFM§
Inches (mm)
NOTE: 1.25 Dia. (32mm) hole required for panel mounting.
BOLD ITEMS ARE MOST POPULAR.
R75 Regulator Dimensions
A B C D E F G
2.19 (55.6)
2.06 (52.4)
2.75 (69.8)
1.38 (34.9)
1.09 (27.8)
1.66 (42.1)
0.69 (17.5)
Catalog 0304-2
R75 Series
19
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
0 10 20 30 40 50 60 70 800
25
50
75
100
Flow CharacteristicsR75-02C
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
Flow - dm3/s
1/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 5 10 15 20 25 30 35
n
0
25
50
75
100
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
Flow CharacteristicsR75-03C
0 10 20 30 40 50 60 70 80
0 5 10 15 20 25 30 35
3/8 Inch Ports100 PSIG (6.9 bar) Primary Pressure
Flow - dm /s3
n
0
25
50
75
100
Flow CharacteristicsR75-04C
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM0 10 20 30 40 50 60 70 80 90
0 5 10 15 20 25 30 35 40
1/2 Inch Ports100 PSIG (6.9 bar) Primary Pressure
Flow - dm /s3
n
QUBE 75 SeriesRegulators
R75 Regulator Kits & AccessoriesCage Kits– Standard ...............................................................................CKR75 Tamperproof .......................................................................CKR75T
Control Knob ................................................................... R35-0545P
Gauges – 1-1/2" Dial Size, 1/8" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4515N18060
1-1/2" Dial Size, 1/8" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4515N18160
Panel Mounting Bracket Kit ............................................ SA161X57
Face Mounting Bracket Kit (See Page 37) .....................SAR75Y57
Panel Mount Nut – Plastic ..............................................................................R05X51-P Aluminum .........................................................................R05X51-A
Repair Kits – Non-Relieving Diaphragm, Valve Assembly ...................... RKR75K Relieving Diaphragm, Valve Assembly .................................RKR75
SpecificationsGauge Ports (2) .....................................................................1/8 Inch
Port Threads ......................................................... 1/4, 3/8 & 1/2 Inch
Supply Pressure .......................................300 PSIG Max. (20,4 bar)
Temperature Rating ...........................40°F to 125°F (4.4°C to 52°C)
Weight ............................................................ 1.35 lbs. (.61 kg) / unit 27 lbs. (12.24 kg) / 20-unit Master Pack
Materials of ConstructionAdjusting Knob ....................................................................... Acetal
Body .............................................................................................Zinc
Bottom Plug ........................................................ Glass-Filled Acetal
Cage ..................................................................... Glass-Filled Acetal
Elastomers ............................................................................ Buna-N
Technical Information
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – R75
20
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
R105 Regulator
Ordering Information
Port Threads
— NPT G BSPP
P U S H L O C K
C
D
G
B
A
F E
R 105 — 04 C /**
Options
G Gauge K Non-relieving P Panel Mount Nut (Plastic)
Reduced Pressure Range
A 0–25 PSIG B 0–60 PSIG C 0–125 PSIG D 0–250 PSIG
Port Size
04 1/2" 06 3/4"
QUBE 105 Series Regulators1/2 & 3/4 Inch Ports
Features• Connects to Other QUBE Units Using Just
Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Diaphragm Operated Design with Balanced Poppet Design for Quick and Accurate Regulation
• Panel Mountable
• High Flow: 1/2" - 150 SCFM§
3/4" - 150 SCFM§
Engineering Change Designator
Will be entered at factory.
R105 Regulator Dimensions
A* A† B C D E F* F† G
2.69 (68.3)
3.03 (77.0)
2.69 (68.3)
3.75 (95.4)
1.81 (46.1)
1.35 (34.1)
2.30 (58.3)
2.55 (64.8)
0.81 (20.6)
Inches (mm)* 3/8 and 1/2 inch ports† 3/4 inch ports
NOTE: 1.75 Dia. (44mm) hole required for panel mounting.
BOLD ITEMS ARE MOST POPULAR.
Port SizeNPT
Relieving
Without Gauge 0-125 PSIG Reduced Pressure1/2" R105-04C3/4" R105-06C
With Gauge 0-125 PSIG Reduced Pressure1/2" R105-04CG3/4" R105-06CG
Bold Items are Most Popular. For other models refer to ordering information below.
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No Flow Secondary Setting, and 20 PSIG Pressure Drop.
Catalog 0304-2
R105 Series
21
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Technical Information
QUBE 105 SeriesRegulators
R105 Regulator Kits & AccessoriesCage Kit – Cage Assembly with Knob ..................................................CKR105
Control Knob ................................................................. R105-0542P
Gauges – 2" Dial Size, 1/4" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4520N14060
2" Dial Size, 1/4" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4520N14160
2" Dial Size, 1/4" Back Connection 0 to 300 PSIG (0 to 20,7 bar) ................................... K4520N14300
Panel Mounting Bracket Kit (Bonnet Threads) ..............SAR10Y57
Face Mounting Bracket Kit (See Page 39) ....................SAR105Y57
Panel Mount Nut – Plastic ..............................................................................R10X51-P Aluminum .........................................................................R10X51-A
Repair Kits – Non-Relieving Diaphragm, Valve Assembly .................... RKR105K Relieving Diaphragm, Valve Assembly ...............................RKR105
SpecificationsGauge Ports (2) .....................................................................1/4 Inch
Port Threads ................................................................ 1/2 & 3/4 Inch
Supply Pressure .......................................300 PSIG Max. (20,4 bar)
Temperature Rating ........................40°F to 150°F (4.4°C to 65.5°C)
Weight ............................................................ 1.64 lbs. (.74 kg) / unit
Materials of ConstructionAdjusting Knob ....................................................................... Acetal
Body ....................................................................................Aluminum
Bottom Plug ................................................................................Zinc
Cage ..........................................................Glass-Filled Acetal Plastic
Elastomers ............................................................................ Buna-N
0
25
50
75
100
Flow CharacteristicsR105-04C, R105-06C
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM0 25 50 75 100 125 150 175
0 10 20 30 40 50 60
Flow - dm /s3
n
1/2 & 3/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – R105
22
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Bowl
A Transparent D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
L35 Lubricator
Ordering Information
Options
X9 Manual Twist Drain on Plastic Bowl (Increases product length by 9/16")
Port Size
01 1/8" 02 1/4"
L 35 — 02 A /**
QUBE 35 Series Lubricators1/8 & 1/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Engineering Change Designator
Will be entered at factory.
Features• Compact Size Allows Greater Design Flexibility
• Nearly Double the Flow Capacity of Standard Miniature Filters; Reduces Costly Pressure Drop
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• For Applications Requiring Minimum Pressure Drop
• Transparent Polyurethane Bowl Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Precision Needle Valve Assures Repeatable Oil Delivery and Provides Simple Adjustment of Delivery Rate.
• Large Capacity Bowl
• High Flow: 1/8" - 23 SCFM§
1/4" - 45 SCFM§
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Port SizeNPT
No Drain Manual Twist Drain
Polyurethane Bowl1/8" L35-01A L35-01AX91/4" L35-02A L35-02AX9
Zinc Bowl / Sight Gauge1/8" L35-01W L35-01W1/4" L35-02W L35-02W
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Port Threads
— NPT G BSPP
Bold Items are Most Popular. For other models refer to ordering information below.
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG Pressure Drop.
Catalog 0304-2
L35 Series
Draincock Standard on D & W Bowls.
23
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C
D
B
A
E
0 5 10 15 20 25 30
Rated Flow - SCFM
0 105
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsL35-01A
1/8 Inch Port
QUBE 35 SeriesLubricators
Technical Information
L35 Lubricator Kits & AccessoriesBowl Kits – Polyurethane (A) .................................................................BKL35A Zinc (D) .............................................................................. BKF35D Zinc (W) Wraparound Sight Gauge .................................. BKF35W
Oil – 1 Gal. .................................................................................F442002 12 Quart Case ...................................................................F442003 4 Gallon Case ....................................................................F442005
Face Mounting Bracket Kit (See Page 35) .....................SAR35Y57
Repair Kit – Tamper-resistant Sight Dome (All) ......................................RKL100
SpecificationsBowl Capacity .................................................................. 1.5 Ounce
Port Threads ................................................................... 1/8, 1/4 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl .............................0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ...........................................0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge ........................ 0 to 250 PSIG (0 to 17.2 40°F to 150°F (4.4°C to 65.6°C)
Suggested Lubricant .......................................................... F442 Oil
Petroleum-based oil of 100 to 200 SUS viscosity at 100°F and an aniline point greater than 200°F
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)
Weight – Polyurethane Bowl .......................................... 0.7 lb. (0.3 kg) / Unit 18.9 lb. (8.6 kg) / 24-unit Master Pack
Zinc Bowl ...................................................... 0.94 lb. (0.4 kg) / Unit 24.7 lb. (11.2 kg) / 24-unit Master Pack
Zinc Bowl W/ Sight Gauge .............................1.00 lb. (0.5 kg) / Unit 26.1 lb. (11.8 kg) / 24-unit Master Pack
Materials of ConstructionBody ............................................................................................. Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Drains ........................................................................................ Brass
Seals ..........................................................................................Nitrile
L35 Lubricator Dimensions
A B C D E
L35-A
1.59 (40.6)
1.59 (40.6)
2.09 (53.5)
3.66 (92.8)
0.80 (20.3)
L35-D
1.59 (40.6)
1.59 (40.6)
2.09 (53.5)
3.63 (92.3)
0.80 (20.3)
L35-W
1.59 (40.6)
1.59 (40.6)
2.09 (53.5)
3.84 (97.6)
0.80 (20.3)
Inches (mm)
0 10 20 30 40 50 60
Rated Flow - SCFM
0 105 2015 25
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 50 75 150
1.7 3.4 5.2
100
6.9 10.3Primary Pressure - bar
Flow - dm /s3
n
Flow CharacteristicsL35-02A
1/4 Inch Port
Catalog 0304-2
Technical Specifications – L35
24
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Bowl
B Transparent with Plastic Bowl Guard W Metal with Wraparound Sight Gauge
L75 Lubricator
Ordering Information
Port Size
02 1/4" 03 3/8" 04 1/2"
Port Threads
— NPT G BSPP
L 75 — 03 B /**
QUBE 75 Series Lubricators1/4, 3/8 & 1/2 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Features• Compact Size Allows Greater Design Flexibility
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• For Applications Requiring Minimum Pressure Drop
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Drain Standard on Metal Bowl and Metal Bowl with Sight Gauge
• Can be Filled While Unit is Under Pressure
• Precision Needle Valve Assures Repeatable Oil Delivery and Provides Simple Adjustment of Delivery Rate.
• Large Capacity Bowl
• High Flow: 1/4" - 15 SCFM§
3/8" - 80 SCFM§
1/2" - 80 SCFM§
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Port Size NPT
Polyurethane Bowl / Plastic Guard1/4" L75-02B3/8" L75-03B1/2" L75-04B
Zinc Bowl / Sight Gauge1/4" L75-02W3/8" L75-03W1/2" L75-04W
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Engineering Change Designator
Will be entered at factory.
Bold Items are Most Popular. For other models refer to ordering information below.
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG Pressure Drop.
Options
Q Buttonhead Fill Fitting X9 Manual Twist Drain on Plastic Bowl (Increases product length by 9/16")
Catalog 0304-2
L75 Series
Draincock Standard on D & W Bowls.
25
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C
G
D
B
A
F E
0
1
2
3
4
5
0 2 4 6 8 10 12 14 16 18Rated Flow - SCFM
0 42 6 8
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
Flow CharacteristicsL75-02B
1/4 Inch Port
Flow - dm /s3
n
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0 10 20 30 40 50 60 70 80 90 100
0 2010 30 40 50
Rated Flow - SCFM
Flow - dm /s3
n
Flow CharacteristicsL75
3/8 & 1/2 Inch Port
QUBE 75 SeriesLubricators
Technical Information
L75 Lubricator Kits & AccessoriesBowl Kits – Polyurethane (B) .................................................................BKL55B Zinc (D) .............................................................................. BKF55D Zinc (W) Wraparound Sight Gauge .................................. BKF55W
Button Head Fill Fitting ...................................................... L606C14 (M14 male thread)
Drain Kits – Manual Twist Drain ....................................................... SA600Y7-1
Oil – 1 Gal. .................................................................................F442002 12 Quart Case ...................................................................F442003 4 Gallon Case ....................................................................F442005
Face Mounting Bracket Kit (See Page 37) .....................SAR75Y57
Repair Kit – Tamper-resistant Sight Dome (All) ......................................RFL100
SpecificationsBowl Capacity .................................................................. 3.8 Ounce
Port Threads .........................................................1/4, 3/8 & 1/2 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl .............................0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ...........................................0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge .................0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
Suggested Lubricant .......................................................... F442 Oil
Petroleum-based oil of 100 to 200 SUS viscosity at 100°F and an aniline point greater than 200°F
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)
Weight – Polyurethane Bowl ........................................ 1.25 lb. (0.6 kg) / Unit 25 lb. (11.3 kg) / 20-unit Master Pack
Zinc Bowl ...................................................... 1.50 lb. (0.7 kg) / Unit 30 lb. (13.6 kg) / 20-unit Master Pack
Zinc Bowl W/ Sight Gauge .............................1.60 lb. (0.7 kg) / Unit 32 lb. (14.5 kg) / 20-unit Master Pack
Materials of ConstructionBody .............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Drains ....................................................................................... Brass
Fill Fitting ................................................................................. Brass
Seals .......................................................................................... Nitrile
L75 Lubricator Dimensions
A B C D E F G
L75-B
2.19 (55.6)
2.00 (52.1)
2.44 (56.3)
4.72 (119.8)
1.00 (25.4)
1.66 (42.1)
0.72 (17.9)
L75-D
2.19 (55.6)
2.00 (52.1)
2.44 (56.3)
5.15 (130.9)
1.00 (25.4)
1.66 (42.1)
0.70 (17.9)
L75-W
2.19 (55.6)
2.00 (52.1)
2.44 (56.3)
5.37 (136.4)
1.00 (25.4)
1.66 (42.1)
0.70 (17.9)
Inches (mm)
Catalog 0304-2
Technical Specifications – L75
26
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Bowl
B Transparent with Plastic Bowl Guard W Metal with Wraparound Sight Gauge
L105 Lubricator
Port Size
04 1/2" 06 3/4"
Port Threads
— NPT G BSPP
L 105 — 04 B /**
QUBE 105 Series Lubricators1/2 & 3/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Engineering Change Designator
Will be entered at factory.
Features• Connects to Other QUBE Units Using Just Screws
and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• For Applications Requiring Minimum Pressure Drop
• Transparent Polyurethane Bowl with Bowl Guard as Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Drain Standard on Metal Bowl and Metal Bowl with Sight Gauge
• Can be Filled While Unit is Under Pressure
• Precision Needle Valve Assures Repeatable Oil Delivery and Provides Simple Adjustment of Delivery Rate.
• Large Capacity Bowl
• High Flow: 1/2" - 110 SCFM§
3/4" - 125 SCFM§
Wraparound Sight Gauge BowlAll QUBE filters, lubricators, and integrals are available with the Watts Wraparound Polyurethane Sight Gauge Bowl. These unique bowls provide the 360° visibility of a plastic bowl while maintaining the high strength and safety features of metal bowls. Polyurethane bowls with guards, and metal bowls, are also available.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Ordering Information
Port Size NPT
Polyurethane Bowl / Plastic Guard1/2" L105-04B3/4" L105-06B
Zinc Bowl / Sight Gauge1/2" L105-04W3/4" L105-06W
Bold Items are Most Popular. For other models refer to ordering information below.
§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, and 5 PSIG Pressure Drop.
Options
Q Buttonhead Fill Fitting X9 Manual Twist Drain on Plastic Bowl (Increases product length by 9/16")
Catalog 0304-2
L105 Series
Draincock Standard on D & W Bowls.
27
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C
G
D
B
A
F E
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
4
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25
1.7
50
3.4
75
5.2
100
6.9
150
10.3Primary Pressure - bar
Flow CharacteristicsL105-04B
1/2 Inch Port
0 20 40 60 80 100 120 140 160
0
Rated Flow - SCFM
2010 30 40 6050 70
Flow - dm /s3
n
0
1
2
3
4
5
0 20 40 60 80 100 120 140 160
Pre
ssu
re D
rop
- P
SIG
Pre
ssu
re D
rop
- b
ar
0
.1
.2
.3
Primary Pressure - PSIG25 10050 75 150
1.7 3.4 5.2 6.9 10.3Primary Pressure - bar
0
Rated Flow - SCFM
2010 30 40 6050 70
Flow - dm /s3
n
Flow CharacteristicsL105-06B
3/4 Inch Port
Technical Information
QUBE 105 SeriesLubricators
Inches (mm)* 3/8 and 1/2 inch ports† 3/4 inch ports
L105 Lubricator Kits & AccessoriesBowl Kits – Polyurethane (B) ............................................................... BKL105B Zinc (D) (with Drain) .........................................................BKF105D Zinc (W) Wraparound Sight Gauge (with Drain) .............. BKF105W
Button Head Fill Fitting (M14 Male Thread) .....................L606C14
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1
Oil – 1 Gal. ................................................................................. F442002 12 Quart Case ................................................................... F442003 4 Gallon Case .................................................................... F442005
Face Mounting Bracket Kit (See Page 39) ....................SAR105Y57
Repair Kit – Tamper-resistant Sight Dome (All) ...................................... RKL100
SpecificationsBowl Capacity ...................................................................8.5 Ounce
Port Threads ................................................................ 1/2 & 3/4 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
Suggested Lubricant ...........................................................F442 Oil
Petroleum-based oil of 100 to 200 SUS viscosity at 100°F and an aniline point greater than 200°F
(DO NOT USE OILS WITH ADDITIVES, COMPOUNDED OILS CONTAINING SOLVENTS, GRAPHITE, DETERGENTS, OR SYNTHETIC OILS.)
Weight – Polyurethane Bowl ........................................ 1.09 lb. (0.5 kg) / Unit 10.7 lb. (4.9 kg) / 8-unit Master Pack
Zinc Bowl ...................................................... 1.53 lb. (0.7 kg) / Unit 14.2 lb. (6.4 kg) / 8-unit Master Pack
Zinc Bowl W/ Sight Gauge ............................. 1.71 lb. (0.8 kg) / Unit 15.7 lb. (7.1 kg) / 8-unit Master Pack
Materials of ConstructionBody .....................................................................................Aluminum
Bowls ............................................................................. Polyurethane Metal (Zinc)
Drains ....................................................................................... Brass
Fill Fitting ................................................................................. Brass
Seals .......................................................................................... Nitrile
L105 Lubricator DimensionsA* A† B C D E F* F† G
L105-B
2.69 (68.4)
3.03 (77.0)
2.69 (68.4)
3.00 (64.3)
6.03 (153.4)
1.34 (34.1)
2.25 (56.1)
2.55 (64.8)
0.81 (20.3)
L105-D
2.69 (68.4)
3.03 (77.0)
2.69 (68.4)
3.00 (64.3)
6.62 (168.2)
1.34 (34.1)
2.25 (56.1)
2.55 (64.8)
0.81 (20.3)
LF105-W
2.69 (68.4)
3.03 (77.0)
2.69 (68.4)
3.00 (64.3)
6.90 (175.3)
1.34 (34.1)
2.25 (56.1)
2.55 (64.8)
0.81 (20.3)
Catalog 0304-2
Technical Specifications – L105
28
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
B 35 — 02 A H C /**
B35 Integral Filter / Regulator
Ordering Information
Bowl
A Transparent D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port Size
01 1/8" 02 1/4"
Port Threads
— NPT G BSPP
Options
G Gauge K Non-relieving P Panel Mount Nut S Piston Drain T Tamperproof Adjustment
Element
G 5 Micron H 20 Micron
C
G
D
F E
B
A
P
US H L O CK
Reduced Pressure Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No Flow Secondary Setting, and 20 PSIG Pressure Drop with 20 Micron Element.
QUBE 35 Series Integral Filter / Regulator1/8 & 1/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Engineering Change
Designator
Will be entered at factory.
Features• Compact Size Allows Greater Design Flexibility• Nearly Double the Flow Capacity of Standard Miniature
Filters; Reduces Costly Pressure Drop
• Connects to Other QUBE Units Using Just Screws and O-rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Piston Operated Regulator for High Flow and Low Pressure Drop
• Panel Mountable
• Excellent Water Removal Efficiency
• Unique Deflector Plate that Creates Swirling of the Air Stream Ensuring Maximum Water and Dirt Separation
• Large Filter Element Surface Guarantees Low Pressure Drop and Increased Element Life
• 20 Micron Filter Element Standard, 5 Micron Available
• Transparent Polyurethane Bowl Standard
• Metal Bowl with Wraparound Sight Gauge Optional
• Manual Drain as Standard, Optional Piston Drain
• Large Bowl Capacity
• High Flow: 1/8" & 1/4" - 35 SCFM§
�
�
�
�
�
�
B35 Integral Filter / Regulator Dimensions
A B C D E F GB35-A1.59
(40.6)1.59
(40.6)2.98
(75.7)4.23
(107.5)0.80
(20.3)1.31
(33.3)0.58
(14.6)
B35-D1.59
(40.6)1.59
(40.6)2.98
(75.7)4.25
(107.9)0.80
(20.3)1.31
(33.3)0.58
(14.6)
B35-W1.59
(40.6)1.59
(40.6)2.98
(75.7)4.45
(113.2)0.80
(20.3)1.31
(33.3)0.58
(14.6)
Inches (mm)
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
NOTE: 1.25 Dia. (32mm) hole required for panel mounting.
Port SizeNPT
Manual Twist Drain Piston Drain
Polyurethane Bowl1/8" B35-01AH B35-01AHS1/4" B35-02AH B35-02AHS
Zinc Bowl / Sight Gauge
1/8" B35-01WH B35-01WHS1/4" B35-02WH B35-02WHS
Catalog 0304-2
B35 Series
29
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
0 5 10 15 20 25 30 35 40 45 500
25
50
75
100
Flow CharacteristicsB35
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
1/8 & 1/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
Flow - dm3/s
0 5 10 15 20
n
QUBE 35 Series Integral Filter / RegulatorIntegral Filter / Regulator
Technical Information
B35 Integral Filter / Regulator Kits & AccessoriesBowl Kits – Polyurethane (A) ................................................................. BKF35A Zinc (D) ...............................................................................BKF35D Zinc (W) Wraparound Sight Gauge ................................... BKF35W
Cage Kits – Push / Pull Adjusting Knob Kit (A Range).......................... CKR35A Push / Pull Adjusting Knob Kit (B & C Range).................CKR35BC
Control Knob ................................................................... R35-0545P
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Piston Drain (Maximum Pressure - 175 PSIG) .................... PKF35 Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ....................................................................EK504VY 20 Micron (All) .................................................................... EK504Y
Gauges – 1-1/2" Dial Size, 1/8" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4515N18060
1-1/2" Dial Size, 1/8" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4515N18160
Panel Mounting Bracket Kit (Bonnet Threads) .............. SA161X57
Face Mounting Bracket Kit (See Page 35) .....................SAR35Y57
Panel Mount Nut – Plastic ..............................................................................R05X51-P Aluminum .........................................................................R05X51-A
Repair Kits – Deflector, Element Retainer (All) .......................................... RKF30 Non-Relieving Piston, Valve Assembly .............................. RKR30K Relieving Piston, Valve Assembly .........................................RKR30
SpecificationsBowl Capacity ...................................................................1.5 Ounce
Gauge Ports (2) .....................................................................1/8 Inch
Port Threads ...................................................................1/8, 1/4 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) With Piston Drain ..........................175 PSIG Max. Press. (11.9 bar) 40°F to 150°F (4.4°C to 65.6°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) With Piston Drain ..........................175 PSIG Max. Press. (11.9 bar) 40°F to 150°F (4.4°C to 65.6°C)
Weight – Polyurethane Bowl ........................................ 0.78 lb. (0.4 kg) / Unit 20.8 lb. (9.4 kg) / 24-unit Master Pack
Zinc Bowl ...................................................... 0.98 lb. (0.4 kg) / Unit 25.6 lb. (11.6 kg) / 24-unit Master Pack
Zinc Bowl W/ Sight Gauge ............................. 1.03 lb. (0.5 kg) / Unit 26.8 lb. (12.2 kg) / 24-unit Master Pack
Materials of ConstructionBody ..............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Cage ..............................................................................Acetal Plastic
Drains ....................................................................................... Brass
Filter Elements ............................................................... Polyethylene
Seals .......................................................................................... Nitrile
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – B35
30
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
B75 Integral Filter / Regulator
Ordering Information
Port Threads — NPT G BSPP
C
G
D
B
A
P U S H L O C K
F E
Port Size
02 1/4" 03 3/8" 04 1/2"
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port SizeNPT
Manual Twist Drain Automatic Float Drain
Polyurethane Bowl / Plastic Guard1/4" B75-02BJC B75-02BJCR3/8" B75-03BJC B75-03BJCR1/2" B75-04BJC B75-04BJCR
Zinc Bowl / Sight Gauge1/4" B75-02WJC B75-02WJCR3/8" B75-03WJC B75-03WJCR1/2" B75-04WJC B75-04WJCR
QUBE 75 Series Integral Filter / Regulator1/4, 3/8 & 1/2 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Engineering Change
Designator
Will be entered
at factory.
Features• Compact Size Allows Greater Design Flexibility• Connects to Other QUBE Units Using Just Screws
& O-rings (Included)• Integral Mounting Slots Eliminate Need for
Mounting Brackets• Diaphragm Operated Design with Balanced Poppet
Design for Quick And Accurate Regulation• Panel Mountable• For Applications Requiring Minimum Pressure Drop• Excellent Water Removal Efficiency• Unique Deflector Plate that Creates Swirling of the Air
Stream Ensuring Maximum Water and Dirt Separation• Large Filter Element Surface Guarantees Low Pressure
Drop and Increased Element Life• 40 Micron Filter Element Standard, 5 Micron Available• Transparent Polyurethane Bowl with Bowl Guard as Standard• Metal Bowl with Wraparound Sight Gauge Optional• Manual Drain as Standard, Optional Auto Float Drain• Large Bowl Capacity• High Flow: 1/4" - 40 SCFM§
3/8" - 60 SCFM§
1/2" - 80 SCFM§
�
�
�
�
�
�
Element
G 5 Micron J 40 Micron
B75 Integral Filter / Regulator Dimensions
A B C D E F G
B75-B, B75-D
2.00 (50.8)
2.00 (50.8)
2.78 (70.6)
5.19 (131.8)
1.00 (25.4)
1.64 (41.7)
0.70 (17.9)
B75-W
2.00 (50.8)
2.00 (50.8)
2.78 (70.6)
5.44 (138.2)
1.00 (25.4)
1.64 (41.7)
0.70 (17.9)
Inches (mm)
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
Options
G Gauge K Non-relieving P Panel Mount Nut R Automatic Float Drain T Tamperproof Adjustment
Reduced Pressure Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG
NOTE: 1.25 Dia. (32mm) hole required for panel mounting.
Bold Items are Most Popular. For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No Flow Secondary Setting, and 20 PSIG Pressure Drop with 20 Micron Element.
Catalog 0304-2
B75 Series
B 75 — 02 B J C /**
31
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
0 10 20 30 40 50 60 70 800
25
50
75
100
Flow CharacteristicsB75-02BJC
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
1/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 5 10 15 20 25 30 35
Flow - dm3/s
n
Technical Information
B75 Integral Filter / Regulator Kits & AccessoriesBowl Kits – Polyurethane (B) ................................................................. BKF55B Zinc (D) ...............................................................................BKF55D Zinc (W) Wraparound Sight Gauge ................................... BKF55W
Cage Kits – Glass-Filled Acetal Plastic ....................................................CKR75 Tamperproof .......................................................................CKR75T
Control Knob ................................................................... R35-0545P
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Internal Auto (Max. Pressure: 175 PSIG) (B & D) ............ SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ................SAF105MD Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ........................................................................EK55G 40 Micron (All) .......................................................................EK55J
Gauges – 1-1/2" Dial Size, 1/8" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4515N18060
1-1/2" Dial Size, 1/8" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4515N18160
Panel Mounting Bracket Kit ............................................ SA161X57
Face Mounting Bracket Kit (See Page 37) .....................SAR75Y57
Panel Mount Nut – Plastic ..............................................................................R05X51-P Aluminum .........................................................................R05X51-A
Repair Kits – Automatic Float Drain (Maximum Pressure - 175 PSIG)....RK602MD Deflector, Element Retainer (All) .......................................... RKF55 Non-Relieving Diaphragm, Valve Assembly ...................... RKR75K Relieving Diaphragm, Valve Assembly .................................RKR75
SpecificationsBowl Capacity ...................................................................3.8 Ounce
Gauge Ports (2) .....................................................................1/8 Inch
Port Threads ......................................................... 1/4, 3/8 & 1/2 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain .......175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain .......175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ........................................ 1.50 lb. (0.7 kg) / Unit 18 lb. (8.2 kg) / 12-Unit Master Pack
Zinc Bowl ....................................................... 1.75 lb. (0.8 kg) / Unit 21 lb. (9.5 kg) / 12-Unit Master Pack
Zinc Bowl W/ Sight Gauge ............................. 1.85 lb. (0.8 kg) / Unit 22 lb. (10 kg) / 12-Unit Master Pack
Materials of ConstructionBody ..............................................................................................Zinc
Bowls ............................................................................. Polyurethane Metal (Zinc)
Cage ..........................................................Glass-Filled Acetal Plastic
Drains ....................................................................................... Brass
Filter Elements ............................................................... Polyethylene
Seals .......................................................................................... Nitrile
QUBE 75 SeriesIntegral Filter / Regulator
0 10 20 30 40 50 60 70 80 90 1000
25
50
75
100
Flow CharacteristicsB75-03BJC, B75-04BJC
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
3/8, 1/2 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 5 10 15 20 25 30 35 40 45
Flow - dm3/s
n
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – B75
32
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
B 105 — 04 B J C /**
B105 Integral Filter / Regulator
Ordering Information
Port Threads
— NPT G BSPP
Port Size
04 1/2" 06 3/4"
Options
G Gauge K Non-relieving P Panel Mount Nut R Automatic Float Drain
Reduced Pressure Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG D 0-250 PSIG
Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
D
P U S H L O C K
C
G
B
A
F E
Engineering Change
Designator
Will be entered at factory.
QUBE 105 Series Integral Filter / Regulator1/2 & 3/4 Inch Ports
BOLD ITEMS ARE MOST POPULAR.
Features• Connects to Other QUBE Units Using Just Screws
& O-rings (Included)• Integral Mounting Slots Eliminate Need for
Mounting Brackets• Diaphragm Operated Design with Balanced Poppet
Design for Quick And Accurate Regulation• Panel Mountable• For Applications Requiring Minimum Pressure Drop• Excellent Water Removal Efficiency• Unique Deflector Plate that Creates Swirling of the Air
Stream Ensuring Maximum Water and Dirt Separation• Large Filter Element Surface Guarantees Low
Pressure Drop and Increased Element Life• 40 Micron Filter Element Standard, 5 Micron Available• Transparent Polyurethane Bowl with Bowl Guard as
Standard• Metal Bowl with Wraparound Sight Gauge Optional• Manual Drain as Standard, Optional Auto Float Drain• Large Bowl Capacity• High Flow: 1/2" - 150 SCFM§
3/4" - 150 SCFM§
�
�
�
�
�
�
Element
G 5 Micron J 40 Micron
Port SizeNPT
Manual Twist Drain Automatic Float Drain
Polyurethane Bowl / Plastic Guard
1/2" B105-04BJC B105-04BJCR
3/4" B105-06BJC B105-06BJCR
Zinc Bowl / Sight Gauge
1/2" B105-04WJC B105-04WJCR
3/4" B105-06WJC B105-06WJCR
B105 Integral Filter / Regulator Dimensions
A* A† B C D E F* F† G
B105-B, B105-D
2.69(68.2)
3.03(77.0)
2.69(68.2)
3.66(92.8)
6.66(169)
1.34(34.1)
2.27(57.5)
2.55(64.8)
0.70(17.9)
B105-W
2.69(68.2)
3.03(77.0)
2.69(68.2)
3.66(92.8)
6.78(172.2)
1.34 (34.1)
2.27(57.5)
2.55(64.8)
0.70(17.9)
Inches (mm)* 3/8 and 1/2 inch ports† 3/4 inch ports
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
NOTE: 1.75 Dia. (44mm) hole required for panel mounting. Bold Items are Most Popular.
For other models refer to ordering information below.§ SCFM = Standard Cubic Feet Per Minute at 100 PSIG Inlet, 75 PSIG No FlowSecondary Setting, and 20 PSIG Pressure Drop with 20 Micron Element.
Catalog 0304-2
B105 Series
33
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Technical Information
B105 Integral Filter / Regulator Kits & AccessoriesBowl Kits – Polyurethane (B) ............................................................... BKF105B Zinc (D) .............................................................................BKF105D Zinc (W) Wraparound Sight Gauge ................................. BKF105W
Cage Kit – Spring Cage Assembly with Knob ......................................CKR105
Control Knob ................................................................. R105-0542P
Drain Kits – Manual Twist Drain ........................................................ SA600Y7-1 Internal Auto (Max. Pressure: 175 PSIG) (B & D) ............ SA602MD Internal Auto (Max. Pressure: 175 PSIG) (W) ................SAF105MD Semi-Automatic “Overnight” Drain .................................... SA602A7 (Drains automatically under zero pressure)
Filter Element Kits – 5 Micron (All) ......................................................................EK100G 40 Micron (All) .....................................................................EK100J
Gauges – 2" Dial Size, 1/4" Back Connection 0 to 60 PSIG (0 to 4 bar) .......................................... K4520N14060
2" Dial Size, 1/4" Back Connection 0 to 160 PSIG (0 to 11 bar) ...................................... K4520N14160
2" Dial Size, 1/4" Back Connection 0 to 300 PSIG (0 to 11 bar) ...................................... K4520N14300
Panel Mounting Bracket Kit (Bonnet Threads) ..............SAR10Y57
Face Mounting Bracket Kit (See Page 39) ...................SAR105Y57
Panel Mount Nut – Plastic ..............................................................................R10X51-P Aluminum .........................................................................R10X51-A
Repair Kits – Auto Float Drain (Maximum Pressure - 175 PSIG).........RK602MD Deflector, Element Retainer (All) ........................................ RKF100 Non-Relieving Diaphragm, Valve Assembly .................... RKR105K Relieving Diaphragm, Valve Assembly ...............................RKR105
SpecificationsBowl Capacity ...................................................................8.5 Ounce
Gauge Ports (2) .....................................................................1/4 Inch
Port Threads ................................................................ 1/2 & 3/4 Inch
Pressure & Temperature Ratings –
Polyurethane Bowl ............................. 0 to 150 PSIG (0 to 10.2 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl ........................................... 0 to 300 PSIG (0 to 20.4 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain ........175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Zinc Bowl w/ Sight Gauge ................. 0 to 250 PSIG (0 to 17.2 bar) 40°F to 150°F (4.4°C to 65.6°C)
With Automatic Float Drain ........175 PSIG Max. Press. (11.9 bar) 40°F to 125°F (4.4°C to 52°C)
Weight – Polyurethane Bowl ........................................ 2.21 lb. (1.0 kg) / Unit 19.7 lb. (8.9 kg) / 8-unit Master Pack
Zinc Bowl ....................................................... 2.66 lb. (1.2 kg) / Unit 23.3 lb. (10.6 kg) / 8-unit Master Pack
Zinc Bowl W/ Sight Gauge ............................. 2.86 lb. (1.3 kg) / Unit 24.9 lb. (11.3 kg) / 8-unit Master Pack
Materials of ConstructionBody .....................................................................................Aluminum
Bowls ............................................................................. Polyurethane Metal (Zinc)
Cage ......................................................................Glass Filled Acetal
Drains ....................................................................................... Brass
Filter Elements ............................................................... Polyethylene
Knob ........................................................................................Plastic
Seals .......................................................................................... Nitrile
QUBE 105 SeriesIntegral Filter / Regulator
0 20 40 60 80 100 120 140 160 1800
25
50
75
100
Flow CharacteristicsB105-04BJC, B105-06BJC
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- P
SIG
Sec
on
dar
y P
ress
ure
- b
ar
Rated Flow - SCFM
1/2 & 3/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 10 20 30 40 50 60 70 80Flow - dm
3/s
n
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Catalog 0304-2
Technical Specifications – B105
34
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C35 Combination Units
QUBE C35 Series Combination Units1/8 & 1/4 Ports
C
B
DA
Two Unit Combo
Three Unit Combo
C
B
DA
A B C D
3.19 (80.9)
7.00 (177.8)
4.25 (107.9)
2.88 (73)
A B C D
4.78 (121.4)
7.00 (177.8)
4.25 (107.9)
2.88 (73)
Inches (mm)
For other models refer to ordering information on next page.
For other models refer to ordering information on next page.
Port Size
Model Numbers
1/8" C35-01BLAHCA
1/4" C35-02BLAHCA
• 20 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
• 20 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
Port Size
Model Numbers
1/8" C35-01FRLAHCA
1/4" C35-02FRLAHCA Inches (mm)
Catalog 0304-2
C35 Series
35
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C 35 — 02 BL A H C A X9
Series
35
Combo Type
BL 2-Unit FRL 3-Unit
Filter Bowl
A Transparent D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Reduced Pressure
Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG
Element
G 5 Micron H 20 Micron
Ordering Information
C35 Combination Units Kits & AccessoriesMounting Bracket Kit (2 Required) ................................SAR35Y57
See individual component sections for other kits and accessories.
QUBE C35 SeriesCombination Units
Lubricator Bowl
A Transparent D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Port Size
01 1/8" 02 1/4"
1.28(32.5)
0.15(3.8)0.78
(19.8)
2.36(59.9)
Ø 0.18(4.6)
Ø 0.83(21.1)
0.12(3)0.30
(7.5)
0.28(7)
1.02(25.9)
0.79(20.1)
Bracket Installation
Drains
S Piston Drain X9 Manual Twist Drain (Lubricator)
BOLD ITEMS ARE MOST POPULAR.
! WARNING
Product rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Port Threads — NPT G BSPP
Catalog 0304-2
Model Number Index – C35
44
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Catalog 0304-2
SC75 & SC105 Series Features & Ordering
SC75 & SC105 Series Solenoid Soft Start / Quick Dump Valves
QUBE Modular FRL SystemSolenoid Soft Start / Quick Dump Valves
Features• Connects to Other QUBE Units Using Just Screws and
O-Rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Combines Soft Start and Quick Dump Valve in the Same Body
• Unit is Installed Downstream of Lubricator (If Used)
• Large Flow Capacities up to 4.2 Cv
• Inline or Modular Mounting
• Soft Start Flow Easily Adjusted
Operation When the valve is installed into the pneumatic system, and pilot operator receives no signal, the air is blocked at Port 1. When a pilot signal is received at pilot operator, the valve shifts, closing the connection between Ports 2 and 3. At the same time, air flow begins between Ports 1 and 2 at a slow rate controlled by the needle valve, located on the top of the valve. When the downstream pressure reaches approximately 60% of the supply pressure, the main valve spool opens allowing full flow through the valve into the system. If pilot signal or system pressure is lost, the valve returns to its initial state, venting the downstream pressure through Port 3.
231
12
231
For SolenoidOperated Valves
For ExternallyPiloted Valves
Model A B C D E F G H
SC75 2.19 (56)
5.43 (138)
2.06 (52)
1.50 (38)
1.66 (42)
.72 (18)
2.56 (65)
1.91 (48)
Inches (mm)
A
C
B
D
E
F
G
H
75 SeriesModel
NumberPort
(NPT)Flow*
Cv24VDC / 48VAC
SC75-03M 3/8" 4.1
SC75-04M 1/2" 4.2
12VDC / 24VACSC75-03Z 3/8" 4.1
SC75-04Z 1/2" 4.2
120VACSC75-03K 3/8" 4.1
SC75-04K 1/2" 4.2*Exhaust Flow A
E
B
D
F
G
C
H
Ordering Information / Dimensions
CAUTIONDo not restrict the inlet of valves having an internal pilot supply. Pressure supply piping must be the same size as
the inlet port or larger to insure that the pilot valve receives sufficient pressure supply during high flow conditions.
!
CAUTIONDo not use synthetic, reconstituted,
or oils with an alcohol content or detergent additive.
!
Start-Up Of Soft Start
FlowRegulatingNeedleValve
Pilot Air Vent
Pressure Begins toRamp Up
SolenoidEnergized
100 PSIGIN OUT
Full Open
Full Flow at 65% ofInlet Pressure
SolenoidEnergized
100 PSIGIN OUT
Exhaust and Closed
PressureDumps toZero
SolenoidDe-Energized
100 PSIGIN OUT
Model A B C D E F G H
SC105 3.03 (77)
6.03 (153)
2.75 (70)
1.84 (47)
2.53 (64)
.84 (21)
2.56 (65)
1.90 (48)
Inches (mm)
105 SeriesModel
NumberPort
(NPT)Flow*
Cv24VDC / 48VAC
SC105-04M 1/2" 5.3
SC105-06M 3/4" 5.7
12VDC / 24VACSC105-04Z 1/2" 5.3
SC105-06Z 3/4" 5.7
120VACSC105-04K 1/2" 5.3
SC105-06K 3/4" 5.7*Exhaust Flow
45
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Catalog 0304-2
Technical Specifications – SC75 & SC105QUBE Modular FRL SystemSolenoid Soft Start / Quick Dump Valves
Inlet & Outlet Port Threads – SC75.........................................................................3/8 Inch NPTF SC105.......................................................................1/2 Inch NPTF (BSPP and BSPT port threads are available through the use of Modular Port Block Kits)
Pressure & Temperature Ratings – Solenoid........................................60 to 145 PSIG (4.1 to 10.0 bar) 32°F to 140°F (0°C to 60°C)
Weight – SC75..................................................................... 3.25 lb. (1.47 kg) SC105..................................................................... 5.5 lb. (2.49 kg)
Materials of ConstructionBody ............................................................................................Zinc
Bottom Plug .............................................................................Brass
Seals ..........................................................................................Nitrile
Springs ......................................................................Stainless Steel
Internal Components ............................................Brass / Aluminum
Top Cover ..........................................................................Aluminum
Technical InformationFlow Characteristics
SC75-03, 04
0
1
2
3
4
5P
ress
ure
Dro
p -
PS
IG
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Pre
ssu
re D
rop
- b
ar
3/8 & 1/2 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 5 10 15 20 25 30 35 40 45
Rated Flow - SCFM
0 5 10 15 20
Flow - dm /s3
n
1/2"3/8"1/4"
Flow CharacteristicsSC105-04, 06
0
1
2
3
4
5
Pre
ssu
re D
rop
- P
SIG
0
0.05
0.10
0.15
0.20
0.25
0.30
0.35
Pre
ssu
re D
rop
- b
ar
1/2, 3/4 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 20 40 60 80 100 120 140 180160 200
Rated Flow - SCFM
0 5 10 15 25 30 35 40 45 50 55 60 65 70 75 80 85 9020
Flow - dm /s3
n
3/4"1/2"
Flow CharacteristicsSC75-03
0
0.25
0.50
0.75
1.75
1.50
1.25
1.00
2.00
Tu
rns
(Co
un
terc
lock
wis
e)
3/8 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 1 2 3 4 5 6 7 98 10
Rated Flow - SCFM
0 21 3 4 4.51.50.5 2.5 3.5
Flow - dm /s3
n
Fill and Exhaust CharacteristicsSC75 Series Soft Start / Quick Dump Valves
0
10
20
30
90
80
70
60
50
40
100
Pre
ssu
re (
PS
IG)
100 PSIG (6.9 bar) Primary Pressure
0 1 2 3 4
Time (Minutes) Approximately2 seconds
60 % OFTOTAL SUPPLY
PRESSURE
1/8 Turn3.5 Minutes
3 Turns8 Seconds
Fill and Exhaust CharacteristicsSC105 Series Soft Start / Quick Dump Valves
0
10
20
30
90
80
70
60
50
40
100
Pre
ssu
re (
PS
IG)
100 PSIG (6.9 bar) Primary Pressure
0 1 2 3 4
Time (Minutes) Approximately2 seconds
60 % OFTOTAL SUPPLY
PRESSURE
1/8 Turn3 Minutes
3 Turns2.8 Seconds
QUBE SC75 & SC105 Series Kits & AccessoriesCoil Kits – 24VDC / 48VAC Coil ............................................................2EV103 12VDC / 24VAC Coil ............................................................2EV102 120 VAC Coil .......................................................................2EV105
Seal Repair Kits – SC75 Series ...................................................................... RKSC75 SC105 Series .................................................................. RKSC105
Exhaust Mufflers SC75 (1/2" Exhaust) .......................................................... M60-04 SC105 (3/4" Exhaust) ......................................................... M60-06
SpecificationsExhaust Ports – SC75........................................................................... 1/2 Inch NPT SC105......................................................................... 3/4 Inch NPT
Gauge Ports – SC75 (2) ..................................................................... 1/8 Inch NPT SC105 (2) ................................................................... 1/4 Inch NPT
Flow CharacteristicsSC105-04
0
0.25
0.50
0.75
1.75
1.50
1.25
1.00
2.00
Tu
rns
(Co
un
terc
lock
wis
e)
1/2 Inch Ports100 PSIG (6.9 bar) Primary Pressure
0 1510 205 25
Rated Flow - SCFM
0 21 3 5 6 7 8 9 10 11 124
Flow - dm /s3
n
46
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
S75 & S105 Solenoid Quick Dump Valves
QUBE Modular FRL SystemSolenoid Quick Dump Valves
231
12
231
For SolenoidOperated Valves
For ExternallyPiloted Valves
AE
B
D
F
G
C
H
A
C
B
D
E
F
G
HOrdering Information / Dimensions
Operation The solenoid quick dump valves are high flow, normally closed, 3-Port, 2-Position directional control valves. Upon energizing the solenoid, inlet air is applied to the top of the piston. The piston pushes against the spring and opens the main valve providing full flow air to the downstream. When the solenoid is de-energized, the main valve closes allowing downstream air to exhaust rapidly through the bottom plug. The bottom plug is tapped so that exhaust may be piped away or fitted with a muffler.
Features• Connects to Other QUBE Units Using Just Screws &
O-Rings (Included)• Integral Mounting Slots Eliminate Need for Mounting
Brackets• Shuts Off Incoming Pressure While Rapidly Exhausting
Downstream Pressure• Unit is Installed Downstream of Lubricator (If Used)• Large Exhaust Flow Capacities Up to 5.7 Cv• Solenoid Operation• Non-locking Manual Override• Inline or Modular Mounting
Closed Position
IN OUT
Open Position
IN OUT
CAUTIONDo not restrict the inlet of valves having an internal pilot supply. Pressure supply piping must be the same size as
the inlet port or larger to insure that the pilot valve receives sufficient pressure supply during high flow conditions.
!
CAUTIONDo not use synthetic, reconstituted,
or oils with an alcohol content or detergent additive.
!
75 SeriesModel
NumberPort
(NPT)Flow*
Cv24VDC / 48VAC
S75-03M 3/8" 4.1
S75-04M 1/2" 4.2
12VDC / 24VACS75-03Z 3/8" 4.1
S75-04Z 1/2" 4.2
120VACS75-03K 3/8" 4.1
S75-04K 1/2" 4.2*Exhaust Flow
105 SeriesModel
NumberPort
(NPT)Flow*
Cv
24VDC / 48VAC
S105-04M 1/2" 5.3
S105-06M 3/4" 5.7
12VDC / 24VACS105-04Z 1/2" 5.3
S105-06Z 3/4" 5.7
120VACS105-04K 1/2" 5.3
S105-06K 3/4" 5.7*Exhaust Flow
Model A B C D E F G H
S75 2.19 (56)
5.43 (138)
2.06 (52)
1.50 (38)
1.66 (42)
.72 (18)
2.56 (65)
1.91 (48)
Inches (mm)
Model A B C D E F G H
S105 3.03 (77)
6.03 (153)
2.75 (70)
1.84 (47)
2.53 (64)
.84 (21)
2.56 (65)
1.90 (48)
Inches (mm)
Catalog 0304-2
S75 & S105 Series Features & Ordering
47
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
QUBE S75 & S105 Series Kits & AccessoriesCoil Kits – 24VDC / 48VAC Coil ............................................................2EV103 12VDC / 24VAC Coil ............................................................2EV102 120 VAC Coil .......................................................................2EV105
Seal Repair Kits – S75 Series ........................................................................... RKS75 S105 Series ....................................................................... RKS105
Exhaust Mufflers S75 (1/2" Exhaust) ............................................................. M60-04 S105 (3/4" Exhaust) ........................................................... M60-06
SpecificationsExhaust Ports S75 ......................................................................................1/2 Inch S105 ....................................................................................3/4 Inch
Gauge Ports (Downstream pressure) S75 (2) .................................................................................1/8 Inch S105 (2) ...............................................................................1/4 Inch
QUBE Modular FRL SystemSolenoid Quick Dump Valves
Maximum Pressure ............................................. 145 PSIG (9.9 bar)
Minimum Operating Pressure .............................. 30 PSIG (2.1 bar)
Temperature Ratings ............................40°F to 120°F (4°C to 49°C)
Weight – S75 ........................................................................3.25 lb. (1.47 kg) S105 ......................................................................5.50 lb. (2.49 kg)
Materials of ConstructionBody ..............................................................................................Zinc
Bottom Plug .............................................................................. Brass
Internal Components ............................................................... Brass
Seals .......................................................................................... Nitrile
Springs .......................................................................Stainless Steel
Top Cover ............................................................................Aluminum
Technical Information
Pre
ssu
re D
rop
- P
SIG
0
1
3
4
2
5
0 10 20 30 40 50 60 70 80 90 100
Rated Flow - SCFM
1/4" 3/8" 1/2"
3/8 & 1/2 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Exhaust Flow CharacteristicsS75-03, 04
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- b
ar
0 5 10 15 20 25 30 35 40 45
Flow - dm3/s
n
Pre
ssu
re D
rop
- P
SIG
0
1
3
4
2
5
0 20 40 60 80 100 120 140 160 180 200
Rated Flow - SCFM
1/2" 3/4"
1/2, 3/4 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Exhaust Flow CharacteristicsS105-04, 06
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- b
ar
0 10 20 30 40 50 60 70 80 90
Flow - dm3/s
n
Catalog 0304-2
Technical Specifications – S75 & S105
48
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
OperationWhen pressure is supplied to the inlet port, gradual filling of the downstream system occurs through the adjustable needle valve. The piston opens the main valve when the downstream side of the valve reaches approximately 60% of the supply pressure. The ramp up time to reach the switch over pressure is adjustable via the needle valve in the cover.The Auto pilot soft start valve is not intended to be used as a shut off valve and should always be placed after a shut off valve.
SSA75 & SSA105 Auto Pilot Soft Start Valve
Features• Connects to Other QUBE Units Using Just Screws &
O-Rings (Included)
• Integral Mounting Slots Eliminate Need for Mounting Brackets
• Smooth Start-up of Pneumatic System
• Unit is Installed Downstream of Lubricator (If Used)
• Air Pilot Operation
• Large Flow Capacities Up to 5.5 Cv
• Inline or Modular Mounting
QUBE Modular FRL SystemAuto Pilot Soft Start Valves
AE
B
D
F
C
Ordering Information / Dimensions
A
D
FB
C
E
Open Position
IN OUT
Closed Position
IN OUT
CAUTIONDo not restrict the inlet of valves having an internal pilot supply. Pressure supply piping must be the same size as
the inlet port or larger to insure that the pilot valve receives sufficient pressure supply during high flow conditions.
!
CAUTIONDo not use synthetic, reconstituted,
or oils with an alcohol content or detergent additive.
!
Model A B C D E F
SSA75 2.19 (56)
4.72 (120)
2.06 (52)
1.50 (38)
1.66 (42)
.72 (18)
Inches (mm)
Model A B C D E F
SSA105 3.03 (77)
5.25 (133)
2.75 (70)
1.50 (387)
2.53 (64)
.84 (21)
Inches (mm)
SSA75 Series
Model Number
Port (NPT)
Flow* Cv
SSA75-03 3/8" 3.4
SSA75-04 1/2" 3.8
SSA105 Series
Model Number
Port (NPT)
Flow* Cv
SSA105-04 1/2" 6.8
SSA105-06 3/4" 8.1
Catalog 0304-2
SSA75 & SSA105 Series Features & Ordering
49
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Technical Information
Materials of ConstructionBody ........................................................................................... Zinc
Bottom Plug – SSA75 ...................................................................................Brass SSA105 ................................................................................... Zinc
Internal Components ..............................................................Brass
Seals .........................................................................................Nitrile
Springs ..................................................................... Stainless Steel
Top Cover ..........................................................................Aluminum
QUBE SSA75 & SSA105 Series Kits & AccessoriesRepair Kits – SSA75 Series .....................................................................RKSS75 SSA105 Series .................................................................RKSS105
SpecificationsGauge Ports (Downstream Pressure) SSA75 (2) ............................................................................1/8 Inch SSA105 (2) ..........................................................................1/4 Inch
Maximum Pressure ........................................... 300 PSIG (20.7 bar)
Minimum Operating Pressure .............................. 30 PSIG (2.1 bar)
Temperature Ratings ............................40°F to 120°F (4°C to 49°C)
Opens to Full Flow ..........................................60% Supply Pressure
Weight – SSA75 ...................................................................2.75 lb. (1.25 kg) SSA105 .................................................................4.50 lb. (2.04 kg)
QUBE Modular FRL SystemAuto Pilot Soft Start Valves
Pre
ssu
re D
rop
- P
SIG
0
1
3
4
2
5
0 10 20 30 40 50 60 70 80 90 100
Rated Flow - SCFM
1/4" 3/8" 1/2"
3/8 & 1/2 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Flow CharacteristicsSSA75-03, 04
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- b
ar
0 5 10 15 20 25 30 35 40 45
Flow - dm3/s
n
Pre
ssu
re D
rop
- P
SIG
0
1
3
4
2
5
0 20 40 60 80 100 120 140 160 180 200
Rated Flow - SCFM
1/2" 3/4"
1/2, 3/4 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Flow CharacteristicsSSA105-04, 06
0
1
2
3
4
5
6
Sec
on
dar
y P
ress
ure
- b
ar
0 10 20 30 40 50 60 70 80 90
Flow - dm3
/sn
Flow Characteristics
Soft Start Adjustment
Turn
s o
f A
dju
stm
ent
(Co
un
terc
lock
wis
e)
0
.50
1.50
2.00
1.00
.25
1.25
1.75
.75
0 1 2 3 4 5 6 7 8 9 10Rated Flow - SCFM
3/8 & 1/2 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Flow CharacteristicsSSA75-03, 04
0 21 3 4 4.51.50.5 2.5 3.5
Flow - dm /s3
n
Turn
s o
f A
dju
stm
ent
(Co
un
terc
lock
wis
e)
0
.50
1.50
2.00
1.00
.25
1.25
1.75
.75
0 5 10 15 20 25
Rated Flow - SCFM
1/2, 3/4 Inch Ports100 PSIG (6.9 bar) Inlet Pressure
Flow CharacteristicsSSA105-04, 06
0 21 3 5 6 7 8 9 10 11 124
Flow - dm /s3
n
Catalog 0304-2
Technical Specifications – SSA75 & SSA105
36
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C75 Combination Units
QUBE C75 Series Combination Units1/4, 3/8 & 1/2 Inch Ports
Two Unit Combo
Three Unit Combo
C
B
A D
C
B
A D
A B C D
C75-BL - B & D Bowls
4.19 106.4)
7.97 (202.4)
5.19 (131.8)
3.44 (81.7)
C75-BL - W Bowls
4.19 106.4)
8.23 (208.9)
5.44 (138.2)
3.44 (87.3)
Inches (mm)For other models refer to ordering information on next page.
Port Size
Model Numbers
1/4" C75-02BLBJCB
3/8" C75-03BLBJCB
1/2" C75-04BLBJCB
• 40 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
• 40 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
For other models refer to ordering information on next page.
Port Size
Model Numbers
1/4" C75-02FRLBJCB
3/8" C75-03FRLBJCB
1/2" C75-04FRLBJCB
A B C D
C75-BL - B & D Bowls
6.57 (166.9)
7.97 (202.4)
5.19 (131.8)
3.44 (81.7)
C75-BL - W Bowls
6.57 (166.9)
8.06 (204.7)
5.31 (134.9)
3.44 (87.3)
Inches (mm)
Catalog 0304-2
C75 Series
37
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Series
75
Combo Type
BL 2-Unit FRL 3-Unit
Element
G 5 Micron J 40 Micron
Ordering Information
C75 Combination Units Kits & AccessoriesMounting Bracket Kit (2 Required) ................................SAR75Y57
See individual component sections for other kits and accessories.
QUBE C75 SeriesCombination Units
Port Size
02 1/4" 03 3/8" 04 1/2"
Filter Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Lubricator Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Bracket Installation
2.50(63.5)
1.40(35.6)
1.97(50)
1.58(40.1)
C 75 — 04 BL B J C B X9
BOLD ITEMS ARE MOST POPULAR.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Port Threads — NPT G BSPP
Reduced Pressure
Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG
Drains
R Automatic Float Drain X9 Manual Twist Drain on Plastic Bowl (Lubricator)
Catalog 0304-2
Model Number Index – C75
38
QU
BE
Featu
resF
iltersC
oalescin
g
Filters
Reg
ulato
rsL
ub
ricators
Integ
ral Filter
Reg
ulato
rsC
om
bin
ation
U
nits
Accesso
riesS
oft S
tart V
alvesM
ou
ntin
g
Brackets
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
C105 Combination Units
QUBE C105 Series Combination Units1/2 & 3/4 Inch Ports
Two Unit Combo
Three Unit Combo
C
B
DA
C
B
DA
For other models refer to ordering information on next page.
Port Size
Model Numbers
1/2" C105-04BLBJCB
3/4" C105-06BLBJCB
A* A† B C D
C105-BL - B & D Bowls
5.38(136.6)
6.06(153.9)
10.32(262.1)
6.66(169.2)
4.20(106.7)
C105-BL - W Bowls
5.38(136.6
6.06(153.9)
10.44(265.2)
6.78(172.2)
4.20(106.7)
Inches (mm)* 1/2 inch ports† 3/4 inch ports
Inches (mm)* 1/2 inch ports† 3/4 inch ports
• 40 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
• 40 Micron Filter Element
• Manual Twist Drain
• Relieving Regulator
• 125 PSI (8.6 bar)
• Gauge Included
For other models refer to ordering information on next page.
Port Size
Model Numbers
1/2" C105-04FRLBJCB
3/4" C105-06FRLBJCB
A* A† B C D
C105-BL - B & D Bowls
8.07 (204.9)
9.09 (230.9)
10.31 (261.8)
6.56 (167)
4.20 (106.7)
C105-BL - W Bowls
8.07 (204.9)
9.09 (230.9)
10.41 (264.4)
6.66 (169.2)
4.20 (106.7)
Catalog 0304-2
C105 Series
39
QU
BE
Fea
ture
sF
ilter
sC
oal
esci
ng
F
ilter
sR
egu
lato
rsL
ub
rica
tors
Inte
gra
l Filt
er
Reg
ula
tors
Co
mb
inat
ion
U
nit
sA
cces
sori
esS
oft
Sta
rt
Val
ves
Mo
un
tin
g
Bra
cket
s
Pneumatic DivisionRichland, Michiganwww.parker.com/watts
Series
105
Combo Type
BL 2-Unit FRL 3-Unit
Reduced Pressure Range
A 0-25 PSIG B 0-60 PSIG C 0-125 PSIG D 0-250 PSIG
Element
G 5 Micron J 40 Micron
Ordering Information
C105 Combination Units Kits & AccessoriesMounting Bracket Kit (2 Required) ..............................SAR105Y57
See individual component sections for other kits and accessories.
QUBE C105 SeriesCombination Units
Port Size
04 1/2" 06 3/4"
Filter Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
Lubricator Bowl
B Transparent with Plastic Bowl Guard D Metal without Sight Gauge W Metal with Wraparound Sight Gauge
2.00(50.1)
2.68(68.1)
Ø 1.38(35.1)
Ø 0.26(6.6)
2.00(50.1)
1.35(34.3)
0.34(8.7)
3.31(84.1)
0.30(7.5)
2.13(54.1)
0.28(7)
0.12(3)
0.79(20.1)
Bracket Installation
C 105 — 04 BL B J C B X9
Drains
R Automatic Float Drain X9 Manual Twist Drain on Plastic Bowl (Lubricator)
BOLD ITEMS ARE MOST POPULAR.
Polyurethane Bowls and Sight Gauges Offer Improved Chemical Compatibility.
! WARNINGProduct rupture can cause serious injury.Do not connect regulator to bottled gas.
Do not exceed maximum primary pressure rating.
CAUTION:REGULATOR PRESSURE ADJUSTMENT – The working range of knob adjustment is designed to permit outlet pressures within their full range. Pressure adjustment beyond this range is also possible because the knob is not a limiting device. This is a common characteristic of most industrial regulators, and limiting devices may be obtained only by special design.For best performance, regulated pressure should always be set by increasing the pressure up to the desired setting.
!
Port Threads — NPT G BSPP
Catalog 0304-2
Model Number Index – C105