EZ Series EZ20 20 kN Universal Materials Testing · PDF fileEZ20 20 kN Universal Materials...

EZ SeriesEZ20 20 kN Universal Materials Testing MachineThe EZ20 advanced materials testing machineincorporates an extensive range of features makingit ideal for performing complex as well as routinetesting applications up to 20 kN (4496 lbf) TheEZ20 features a twin column design with a standardcrosshead travel of 870 mm (34.3 in).

This bench mounted machine is microprocessorcontrolled and incorporates world proven 32 bittechnology for highly accurate load measurementand rapid data acquisition. The EZ20 features anintegral user interface consisting of a side mountedcontrol console with large, positive actionmembrane keys, allowing complex tests to beperformed at the touch of a button. A back lit 4 lineLCD display shows the test and set up informationin a wide choice of user selectable languages andunits.

The stand alone system is capable of storing up to600 test results from a choice of ten programmabletest set ups. Test parameters are entered using thekeypad in a sequential menu driven format.

For additional flexibility, the EZ20 can also beconnected to a personal computer with optionalLloyd Instruments NEXYGENPlus material test andcontrol software. NEXYGENPlus software providesalmost unlimited testing and results processingcapability in a familiar Windows® environment.

The high stiffness frame incorporates a crossheadguidance system to prevent side loading of thesample under test. The crosshead is driven by twinlead screws and a high precision servo motor andDC servo system to achieve a wide range ofspeeds.

A series of highly accurate, interchangeable loadcells is available for tension, compression andcycling through zero force measurements. Ourextensive range of grips and fixtures supportvirtually any type of test. The system is ideal for non-continuous testing use in production, quality control,education and research environments. Wherecontinuous testing is required, we recommend theLloyd Instruments LR30KPlus 30 kN materialstesting machine.

Features

Specifications

• Simple to set up, operate and maintain• High accuracy load measurement• Constant load holding• Data sampling rate 8 kHz• Load rate control• Saves up to 600 test results• 10 programmable test set ups• Pre-loading of samples and cycling to load or

extension limits• Multi-stage testing with NEXYGENPlus software

• Extension resolution < 0.1 microns• Multi-lingual display options• Multi-unit display options• Flash upgradeable• Extended column options for testing high extension

materials• Wide selection of load cells, grips, jigs,

extensometers, temperature chambers and other accessories

Force Capacity:EZ20 (Standard) 20 kN (4496 lbf)EZ20-E (Extended) 20 kN (4496 lbf)

Crosshead Speed Range: 0.001 to 508 mm/min up to 20 kN(0.00004 to 20 in/min up to 4496 lbf)0.01 to 1016 mm/min up to 10 kN(0.0004 to 40 in/min up to 2248 lbf)

Speed Accuracy: < 0.2% at steady stateTravel:

EZ20 870 mm (34.3 in)EZ20-E 1370 mm (54 in)

Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001N (Load cell specific)Load Cell Accuracy: <0.5%Extension Resolution: < 0.1 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and AnalogueLoad Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software

(optional)Supply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T5AH250V,

115Vac ±10%, 50-60 Hz, Fuse T10AH250VWeight:

EZ20 148 kg (326 lb)EZ20-E 152 kg (335 lb)

Operating Temperature: 5° to 35° C (41° to 95° F)

SSeepptteemmbbeerr 22000099SSSS-MMTT-66222222-00990099

©© 22000099 bbyy AAMMEETTEEKK,, IInncc..

Specification Sheet

Item Part No

XLC Series Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/236520 kN (4496 lbf) 01/2417

Item Part No

Application Software:NEXYGENPlus 40/0771

Grips & Fixtures: A wide range of grips and fixtures are available. For further information see our grip specification sheets.

Item

Extensometers: We supply contacting and non-contacting extensometers. For further information see our extensometer specificationsheets.

Temperature Chambers and High Temperature Furnaces: A range of thermal chambers and furnaces are available. For further information see our specification sheets.

Splinter Shields: Splinter shields can be supplied to your specific requirements.Contact Lloyd Instruments for further information.

EZ20 Large Compression Cage Option: The EZ20 machine can be ordered mounted above afloor standing compression cage for larger sample testing.Contact Lloyd Instruments to discuss your specification needs.

Accessories

Ordering Information

A E

C

Machine Dimensions

D

B

Tensile test Compression test Flexure test

Model Part No Capacity DescriptionEZ20 01/2889 20 kN (4496 lbf) EZ20 Materials Testing Machine with Console EZ20-E 01/3375 20 kN (4496 lbf) EZ20 Materials Testing Machine (Extended) with Console

mm inA (Standard machine height) 1567 61.7A (Extended machine height) 2067 81.4B 404 16.0C 868 34.2D 596 23.5E (Standard machine travel) 870 34.3E (Extended machine travel) 1370 54.0

www.ametek.com

This document contains many AMETEK trademarks and registered trademarks, including, by not limited to, the AMETEK mark and logo. All other company, product and service marks, logos or imagesare copyrighted trademarks or service marks of their respective owners. All rights reserved. Specifications subject to change without notice.

UK / Head Office

Lloyd Instruments LtdSteyning WayBognor RegisWest Sussex, PO22 9ST

Tel +44 (0)1243 833 370Fax +44 (0)1243 833 401E-mail [email protected] www.lloyd-instruments.co.uk

USA

AMETEK Measurement & CalibrationTechnologies Division8600 Somerset DriveLargo, Florida 33773

Tel +1 (727) 536 7831Fax +1 (727) 539 6882E-mail [email protected] www.lloyd-instruments.com

www.chatillon.com

Singapore

AMETEK Singapore Pte LtdNo. 43 Changi South Avenue 2#04-01 Singapore#05-12 Techpoint 486164, Singapore

Tel +65 6484 2388 Fax +65 6481 6588E-mail [email protected] www.lloyd-instruments.com

France

AMETEK S.A.S.Rond Point de l’Epine des ChampsBuro Plus - Bât. D78990 Elancourt

Tel +33 (0)1 30 68 89 40Fax +33 (0)1 30 68 89 49E-mail general@lloyd-instruments@

ametek.frWeb www.lloyd-instruments.fr

Germany

AMETEK GmbHRudolf-Diesel-Straße 16D-40670 Meerbusch

Tel +49 (0)2159 9136-0Fax +49 (0)2159 9136-39E-mail [email protected] www.ametek.de

China

AMETEK, Inc. - Shanghai Rep. OfficeRm 912, Metro Tower30 Tian Yao Qiao RoadShanghai 200030

Tel +86 21 6426 8111Fax +86 21 6426 7818 Ext.12E-mail [email protected] www.lloyd-instruments.com

EZ SeriesEZ50 50 kN Universal Materials Testing MachineThe EZ50 advanced materials testing machineincorporates an extensive range of features makingit ideal for performing complex as well as routinetesting applications up to 50 kN (11241 lbf) Thestandard EZ50 features a twin column design with acrosshead travel range of 855 mm (33.7 in).Extended machine column options (EZ50-E models)for testing high elongation materials are alsoavailable.

This bench mounted machine is microprocessorcontrolled and incorporates world proven 32 bittechnology for highly accurate load measurementand rapid data acquisition. The EZ50 features anintegral user interface consisting of a side mountedcontrol console with large, positive actionmembrane keys, allowing complex tests to beperformed at the touch of a button. A back lit 4 lineLCD display shows the test and set up informationin a wide choice of user selectable languages andunits.

The stand alone system is capable of storing up to600 test results from a choice of ten programmabletest set ups. Test parameters are entered using thekeypad in a sequential menu driven format.

For additional flexibility, the EZ50 can also beconnected to a personal computer with optionalLloyd Instruments NEXYGENPlus material test andcontrol software. NEXYGEN software providesalmost unlimited testing and results processingcapability in a familiar Windows® environment.

The high stiffness frame incorporates a crossheadguidance system to prevent side loading of thesample under test. The crosshead is driven by twinlead screws and a high precision servo motor andDC servo system to achieve a wide range of speedsthroughout the full load range.

A series of highly accurate, interchangeable loadcells is available for tension, compression andcycling through zero force measurements. Ourextensive range of grips and fixtures supportvirtually any type of test. The system is ideal for non-continuous testing use in production, quality control,education and research environments. Wherecontinuous testing is required, we recommend theLloyd Instruments LR50KPlus 50 kN materialstesting machine.

Features

• Simple to set up, operate and maintain• High accuracy load measurement • Constant load holding• Data sampling rate 8 kHz• Load rate control• Saves up to 600 test results• 10 programmable test set ups• Pre-loading of samples and cycling to load or





Force Capacity:EZ50 (Standard) 50 kN (11241 lbf)EZ50-EE (Extended) 50 kN (11241 lbf)

Crosshead Speed Range: 0.01 to 254 mm/min (0.0004 to 10 in/min) at full load

Speed Accuracy: <0.2% at steady stateMaximum Crosshead Travel:

EZ50 855 mm (33.7 in)EZ50-EE 1355 mm (53.4 in)

Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001N (Load cell specific)Load Cell Accuracy: <0.5%Extension Resolution: < 0.03 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and AnalogueLoad Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software

(optional)Supply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T5AH250V,


EZ50 148 kg (326 lb)EZ50-E 152 kg (335 lb)

Operating Temperature: 5° to 35° C (41° to 95° F)



Specification Sheet

Item Part No

XLC Series Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/236520 kN (4496 lbf) 01/241730 kN (6744 lbf) 01/236650 kN (11241 lbf) 01/2367

Item Part No



Item


Temperature Chambers and High Temperature Furnaces: A range of thermal chambers and furnaces are available.For further information see our specification sheets.


EZ50 Large Compression Cage Option: The EZ50 machine can be ordered mounted above afloor standing compression cage for larger sample testing.Contact Lloyd Instruments to discuss your specification needs.

Accessories


A E

C

Machine Dimensions

D

B


Model Part No Capacity DescriptionEZ50 01/2830 50 kN (11241 lbf) EZ50 Materials Testing Machine with ConsoleEZ50-E 01/3226 50 kN (11241 lbf) EZ50 Materials Testing Machine (Extended) with Console


www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China



LR5KPlus 5 kN Universal Materials Testing MachineThe LR5KPlus advanced materials testing machineincorporates an extensive range of features makingit ideal for performing complex as well as routinetesting applications up to 5 kN (1124 lbf) Thestandard LR5KPlus features a twin column designwith a maximum crosshead travel of 975 mm (38.4in). Extended machine column options (LR5KPlus-Emodels) for testing high elongation materials arealso available.

This bench mounted machine is microprocessorcontrolled and incorporates world proven 32 bittechnology for highly accurate load measurementand rapid data acquisition. The LR5KPlus featuresan integral user interface consisting of a sidemounted control console with large, positive actionmembrane keys, allowing complex tests to beperformed at the touch of a button. A back lit 4 lineLCD display shows the test and set up informationin a wide choice of user selectable languages andunits.

The stand alone system is capable of storing up to600 test results from a choice of ten programmable

test set ups. Test parameters are entered using thekeypad in a sequential menu driven format.

For additional flexibility, the LR5KPlus can also beconnected to a personal computer with optionalLloyd Instruments NEXYGENPlus material test andcontrol software. NEXYGEN software providesalmost unlimited testing and results processingcapability in a familiar Windows® environment.

The high stiffness frame incorporates a crossheadguidance system to prevent side loading of thesample under test. The crosshead is driven by twinlead screws and a high precision motor to achieve awide range of speeds throughout the full loadrange.

A series of highly accurate, interchangeable loadcells is available for tension, compression andcycling through zero force measurements. Ourextensive range of grips and fixtures supportvirtually any type of test. The system is ideal for usein production, quality control, educational andresearch environments.

Features

Specifications

• Simple to set up, operate and maintain• High accuracy load measurement • Constant load holding• Data sampling rate 8 kHz• Load rate control• Saves up to 600 test results• 10 programmable test set ups• Pre-loading of samples and cycling to load or





Force Capacity:LR5KPlus (Standard) 5 kN (1124 lbf)LR5KPlus-E (Extended) 5 kN (1124 lbf)

Crosshead Speed Range: 0.01 to 1016 mm/min (0.0004 to 40 in/min)


LR5KPlus 975 mm (38.4 in)LR5KPlus-E 1463 mm (57.6 in)

Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001 N (Load cell specific)Load Cell Accuracy: <0.5%Extension Resolution: <0.1 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and Analogue Load Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGEN Plus Data Analysis SoftwareSupply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T3.15AH250V

115Vac ±10%, 50-60 Hz, Fuse T6.3AH250VWeight:

LR5KPlus 99 kg (218 lb)LR5KPlus-E 103 kg (227 lb)

Operating Temperature: 5° to 35°C (41° to 95°F)

September 2009SS-MT-6251-0909

© 2009 by AMETEK, Inc.

Specification Sheet

Accessories


A E

C

Machine Dimensions

D

B


Model Part No Capacity DescriptionLR5KPlus 01/3051 5 kN (1124 lbf) LR5KPlus Materials Testing Machine with ConsolelLR5KPlus-E 01/3073 5 kN (1124 lbf) LR5KPlus Materials Testing Machine (Extended) with Console

Item Part No

Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/2364

Item Part No



Item Part No




LR5KPlus-CC Large Compression Cage Option: The LR5KPlus machine can be ordered mounted above afloor standing compression cage for larger sample testing.Contact Lloyd Instruments to discuss your specification needs.


www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China



LR10KPlus10 kN Universal Materials Testing MachineThe LR10KPlus advanced materials testingmachine incorporates an extensive range offeatures making it ideal for performing complex aswell as routine testing applications up to 10 kN(2248 lbf) The standard LR10KPlus features a twincolumn design with a maximum crosshead travel of950 mm (37.4 in). Extended machine columnoptions (LR10KPlus-E models) for testing highelongation materials are also available.

This bench mounted machine is microprocessorcontrolled and incorporates world proven 32 bittechnology for highly accurate load measurementand rapid data acquisition. The LR10KPlus featuresan integral user interface consisting of a sidemounted control console with large, positive actionmembrane keys, allowing complex tests to beperformed at the touch of a button. A back lit 4 lineLCD display shows the test and set-up informationin a wide choice of user selectable languages andunits.


test set-ups. Test parameters are entered using thekeypad in a sequential menu driven format.

For additional flexibility, the LR10KPlus can also beconnected to a personal computer with optionalLloyd Instruments NEXYGENPlus material test andcontrol software. NEXYGENPlus software providesalmost unlimited testing and results processingcapability in a familiar Windows® environment.

The high stiffness frame incorporates a crossheadguidance system to prevent side loading of thesample under test. The crosshead is driven by twinlead screws and a high precision motor to achieve awide range of speeds throughout the full loadrange.


Features

Specifications

• Simple to set up, operate and maintain• High accuracy load measurement • Constant load holding• Data sampling rate 8 kHz• Load rate control• Saves up to 600 test results• 10 programmable test set-ups• Pre-loading of samples and cycling to load or


• Extension resolution <0.05 microns• Multi-lingual display options• Multi-unit display options• Flash upgradeable• Extended column options for testing high extension







Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001 N (load cell specific)Load Cell Accuracy: <0.5%Extension Resolution: <0.05 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and AnalogueLoad Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software

(optional)Supply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T3.15AH250V

115Vac ±10%, 50-60 Hz, Fuse T6.3AH250VWeight:



Specification Sheet



Accessories


A E

C

Machine Dimensions

D

B


Model Part No Capacity DescriptionLR10KPlus 01/3052 10 kN (2248 lbf) LR10KPlus Materials Testing Machine with ConsoleLR10KPlus-E 01/3078 10 kN (2248 lbf) LR10KPlus Materials Testing Machine (Extended) with Console


Item Part No

XLC Series Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/2365

Item Part No



Item





www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China










Features

Specifications









LR30KPlus 870 mm (34.3 in)LR30KPlus-E 1370 mm (54 in)

Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001 N (load cell specific)Load Cell Accuracy: <0.5% Extension Resolution: <0.05 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and Analogue Load Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software

(optional)Supply Voltage: 230Vac ±10%, 50-60 Hz, Fuse T5AH250V






Specification Sheet

Item Part No

XLC Series Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/236520 kN (4496 lbf) 01/241730 kN (6744 lbf) 01/2366

Item Part No



Item





Accessories


A E

C

Machine Dimensions

D

B




www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China










Features

Specifications










Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001 N (lload cell specific.)Load Cell Accuracy: <0.5%Extension Resolution: <0.05 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and Analogue Load Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software







Specification Sheet

Item Part No

XLC Series Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/236520 kN (4496 lbf) 01/241730 kN (6744 lbf) 01/236650 kN (11241 lbf) 01/2367

Item Part No



Item





Accessories


A E

C

Machine Dimensions

D

B




www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China



LS100Plus 100 kN Universal Materials Testing MachineThe LS100Plus advanced materials testing machineincorporates an extensive range of features makingit ideal for performing complex as well as routinetesting applications up to 100 kN (22481 lbf) Thestandard LS100Plus features a twin column designwith a maximum crosshead travel of 824 mm (32.4 in). Extended machine column options(LS100Plus-E models) for testing high elongationmaterials are also available.

This bench mounted machine is microprocessorcontrolled and incorporates world proven 32 bittechnology for highly accurate load measurementand rapid data acquisition. The LS100Plus featuresan integral user interface consisting of a sidemounted control console with large, positive actionmembrane keys, allowing complex tests to beperformed at the touch of a button. A back lit 4 lineLCD display shows the test and set-up informationin a wide choice of user selectable languages andunits.



For additional flexibility, the LS100Plus can also beconnected to a personal computer with optionalLloyd Instruments NEXYGENPlus material test andcontrol software. NEXYGENPlus software providesalmost unlimited testing and results processingcapability in a familiar Windows® environment.

The high stiffness frame incorporates a crossheadguidance system to prevent side loading of thesample under test. The crosshead is driven by twinlead screws and a high precision servo motor andDC servo system to achieve a wide range ofspeeds.


Features

Specifications


extension limits

• Multi-stage testing with NEXYGENPlus software• Extension resolution <0.03 microns• Multi-lingual display options• Multi-unit display options• Flash upgradeable• Wide selection of load cells, grips, jigs,


Force Capacity:LS100Plus (Standard) 100 kN (22481 lbf)LS100Plus-EE (Extended) 100 kN (22481 lbf)

Crosshead Speed Range: 0.001 to 254 mm/min from 0 to 50 kN(0.00004 to 10 in/min from 0 to 11241 lbf)0.001 to 101.6 mm/min from 50 to 100 kN(0.00004 to 4 in/min from 11241 to 22481 lbf)

Speed Accuracy: < 0.2% at steady stateMaximum Crosshead Travel:

LS100Plus 842 mm (32.4 in)LS100Plus-EE 1012 mm (39.8 in)

Width Between Columns: 404 mm (16 in)Minimum Load Resolution: 0.0001 N (load cell specific)Load Cell Accuracy: <0.5%Extension Resolution: <0.03 micronsData Sampling Rate: 8 kHzDisplay: 40 character x 4 line backlit LCDExtensometer Inputs: Digital and Analogue Load Measuring System: EN ISO 7500:2004 Class 0.5 ASTM E4Software: NEXYGENPlus Data Analysis Software



LS100Plus 200 kg (441 lb)LS100Plus-EE 204 kg (450 lb)

Operating Temperature: 5° to 35° C (41° to 95°F)



Specification Sheet

Item Part No

Load Cells:5 N (1.12 lbf) 01/294610 N (2.25 lbf) 01/236020 N (4.5 lbf) 01/295050 N (11.25 lbf) 01/2361100 N (22.5 lbf) 01/2480250 N (56.25 lbf) 01/3048500 N (112.5 lbf) 01/23621000 N (225 lbf) 01/24192500 N (562.50 lbf) 01/23635000 N (1124 lbf) 01/236410 kN (2248 lbf) 01/236520 kN (4496 lbf) 01/241730 kN (6744 lbf) 01/236650 kN (11241 lbf) 01/2367100 kN (22481 lbf) 01/2896

Item Part No


Item Part No





LS100Plus-CCC Large Compression Cage Option: The LS100Plus machine can be ordered mounted above afloor standing compression cage for larger sample testing.Contact Lloyd Instruments to discuss your specification needs.

Accessories


A E

C

Machine Dimensions

D

B


Model Part No Capacity DescriptionLS100Plus 01/3174 100 kN (22481 lbf) LS100Plus Materials Testing Machine with ConsoleLS100Plus-E 01/3301 100 kN (22481 lbf) LS100Plus Materials Testing Machine (Extended) with Console


www.ametek.com


UK / Head Office



USA



www.chatillon.com

Singapore



France




Germany



China



EZ Series EZ20 20 kN Universal Materials Testing · PDF fileEZ20 20 kN Universal Materials...

Documents

Transcript of EZ Series EZ20 20 kN Universal Materials Testing · PDF fileEZ20 20 kN Universal Materials...