DatasheetTo view or download the latest technical information about this product, including specifications, dimensions, accessories, andwiring, see www.bannerengineering.com.

Models

Models1 LED Color 2

T8LGXXPQP Color 1: Green

T8LXRXPQP Color 2: Red

T8LXXYPQP Color 3: Yellow

• Polycarbonate/ABS alloy housing,thermoplastic diffuser.

• IP67

M18GXXPQ Color 1: Green

M18XRXPQ Color 2: Red

M18XXYPQ Color 3: Yellow

• Nickel-plated brass housing, thermoplasticdiffuser.

• Fully encapsulated IP67

T18GXXPQ Color 1: Green

T18XRXPQ Color 2: Red

T18XXYPQ Color 3: Yellow

• Thermoplastic polyester housing,thermoplastic diffuser.

• Fully encapsulated IP67

T30GXXPQ Color 1: Green

T30XRXPQ Color 2: Red

T30XXYPQ Color 3: Yellow

• Thermoplastic polyester housing,thermoplastic diffuser.

• Fully encapsulated IP67

Models1 LED Color2

K30LGXXPQ Color 1: Green

K30LXRXPQ Color 2: Red

K30LXXYPQ Color 3: Yellow

• 22 mm threaded polycarbonate base,translucent polycarbonate dome.

• Fully encapsulated IP67, IP69K

K50LGXXPQ Color 1: Green

K50LXRXPQ Color 2: Red

K50LXXYPQ Color 3: Yellow

• 30 mm threaded polycarbonate base,translucent polycarbonate dome.

• Fully encapsulated IP67, IP69K

K50FLGXXPQ Color 1: Green

K50FLXRXPQ Color 2: Red

K50FLXXYPQ Color 3: Yellow

• ABS base, translucent polycarbonate dome.

• Fully encapsulated IP67, IP69K

K80LGXXPQ Color 1: Green

K80LXRXPQ Color 2: Red

K80LXXYPQ Color 3: Yellow

• Polycarbonate base, translucentpolycarbonate dome.

• Electronics fully encapsulated IP67

WARNING:• Do not use this device for personnel protection• Using this device for personnel protection could result in serious injury or death.• This device does not include the self-checking redundant circuitry necessary to allow its use in

personnel safety applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output condition.

1 • T8L Models: Standard QD models are listed. To order the integral 4-wire cable model, omit the suffix QP. For example, T8LGXXP.• K30FL Models: Standard 4-pin M12/Euro-style integral QD connector models are listed. For 2 m (6.5 ft) integral 4-wire cable model, omit suffix

Q. For example K30LGRXP. For 150 mm (6 inch) PVC cable with 4-pin M12/Euro-style connector, replace suffix Q with QP. For example,K30LGRXPQP. For terminal model, replace suffix Q with T. For example, K30LGRXPT.

• K80L Models: Standard 4-pin Euro integral QD connector models are listed. To order the terminal-wired model, omit suffix Q. For example,K80LGXXP.

• Other Models: Standard 4-pin M12/Euro-style integral QD connector models are listed. To order the 2 m (6.5 ft) integral 4-wire cable model, omitsuffix Q. For example, M18GXXP. To order the 150 mm (6 inch) PVC cable with 4-pin M12/Euro-style connector, replace suffix Q with QP. Forexample, M18GXXPQP.

• Models with a quick disconnect require a mating cordset.2 Contact Banner Engineering for other colors and color combinations.

EZ-LIGHT® One-Color General-PurposeIndicators

Original Document130865 Rev. G

27 June 2019

130865

Specifications

Supply Voltage and CurrentT8L models: 10 V dc to 30 V dc at 20 mA maximumT18, M18, and K30L models: 10 V dc to 30 V dc at 25 mA maximum perLED colorT30 models: 10 V dc to 30 V dc at 40 mA maximum per LED colorK50L, K50FL, and K80L models: 18 V dc to 30 V dc at 40 mA maximum perLED color

IndicatorsEntire translucent diffuser or dome provides indication. Green and yellow,when connected to discrete output of 3-wire or 4-wire sensors. For othercolors, contact factory for availability.

Input Response TimeIndicator ON/OFF: 1 ms max.

ConnectionsT8L models: 4-pin M12/Euro-style 150 mm (6 in) PVC cable with QD (QP) or4-wire, 2 m (6.5 ft) integral cable, depending on modelK30L models: 4-pin M12/Euro-style QD (Q), 150mm (6") PVC cable with QD(QP), 4-wire, 2 m (6.5 ft) integral cable, or 5 color-coded screw terminal forup to 16 AWG wire, depending on model. Screw terminal max torque:0.11N-m (1.0lbf-in).K80L models: 4-pin M12/Euro-style integral QD (Q)standard; terminal-wiredmodels available for use with bulk cable; compression fitting optional.Contact Factory for cable information.Other models: 4-pin /M12/Euro-style integral QD (Q), 150 mm (6 in) PVCcable with QD (QP), or 4-wire, 2 m (6.5 ft) integral cable, depending onmodel

ConstructionSee Models lists

Environmental RatingRated IEC IP67. T8L not encapsulated; K80L has encapsulated electronicsonly; other models fully encapsulated.K30L, K50L, and K50FL QD models meet IP69K, per DIN 40050-9.Cabled models also meet IP69K if the cable and cable entrance areprotected from high-pressure spray.

Operating ConditionsTemperature: –40 °C to +50 °C (–40 °F to +122 °F)

Certifications

K30L and K50L models only:

Required Overcurrent Protection

WARNING: Electrical connections must bemade by qualified personnel in accordance withlocal and national electrical codes andregulations.

Overcurrent protection is required to be provided by end productapplication per the supplied table.Overcurrent protection may be provided with external fusing or via CurrentLimiting, Class 2 Power Supply.Supply wiring leads < 24 AWG shall not be spliced.For additional product support, go to www.bannerengineering.com.

Supply Wiring (AWG) Required Overcurrent Protection (Amps)

20 5.0

22 3.0

24 2.0

26 1.0

28 0.8

30 0.5

Dimensions

T8L Models T18 Models M18 Models

ø16.3 mm (0.64")

8.8 mm (0.35")

150 mm (6") Euro-style PVC Pigtail

19.1 mm (0.75")

15. 8 mm (0.62")

M8 X 1

120037

Ø 15 mm(0.59")

M18 x 1Thread

33.0 mm(1.3")

53.6 mm(2.11")

M12 X 1

30 mm (1.2")

23 mm (0.9")

Ø16.5 mm (0.65")

61 mm (2.4")

M12 X 1

M18 X 1

EZ-LIGHT® One-Color General-Purpose Indicators

2 www.bannerengineering.com - Tel: + 1 888 373 6767 P/N 130865 Rev. G

T30 Models K30L Models K30 Terminal Models

M30 x 1.5Thread

Ø 40.0 mm(1.57")

45.0 mm(1.77")

63.7 mm(2.51")

Ø 15 mm(0.59")

M12 X 131.0 mm (1.22")

58.0 mm (2.28")

30.0 mm (1.18")

16.0 mm (0.63")

M12 X 1

Max. Torque2.25 Nm (20 in-lbf)

M22 X 1.5

52.4[2.06]

42[1.65]

M22 X 1.5 -6g

K50L Models K50FL Models K80L Models

50.0 mm (1.97")

38 mm (1.50")*

20 mm (0.79")

11 mm (0.43")

M30 x 1.5(mounting nut

included)

Internal Threads ½ - 14 NPSM

Max. Torque 4.5 Nm (40 in-lbf)

Max. Torque 2.25 Nm(20 in-lbf)

60.0[2.36"]

35.0[1.38"]

16.0 [0.63"]

40.0 [1.58"]

2x 5.0 [0.20"]

2x 5.0 [0.20"]

2x 5.5 [0.21"]

Ø50 [1.97"]

17.0 [0.67"]

44.6 [1.76"]

109.5 mm(4.31")

80.8 mm(3.18")

66.3 mm(2.61")

26.0 mm(1.02")

M12 X 1

65.0 mm(2.56")

65.0 mm(2.56")

4X 8–32 UNC Max. Torque 1.12 Nm (10 in–lbf)

4X Ø 5.5 mm (Ø 0.22") Max. Torque 1.12 Nm (10 in–lbf)

with supplied screws

Internal Threads ½ - 14 NPSM Max. Torque 2.25 Nm (20 in–lbf)

Wiring

For NPN Operation

Color 1 Color 2 Color 3

Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used

For PNP Operation

Color 1 Color 2 Color 3

Pin 1 and Pin 2 not used Pin 4 and Pin 2 not used Pin 1 and Pin 4 not used

Wiring Key

1. Brown (bn)2. White (wh)

3. Blue (bu)4. Black (bk)

EZ-LIGHT® One-Color General-Purpose Indicators

P/N 130865 Rev. G www.bannerengineering.com - Tel: + 1 888 373 6767 3

Accessories

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model Length Style Dimensions Pinout (Female)

MQDC-406 1.83 m (6 ft)

Straight

44 Typ.

ø 14.5M12 x 1

2

34

1

1 = Brown2 = White3 = Blue4 = Black

MQDC-415 4.57 m (15 ft)

MQDC-430 9.14 m (30 ft)

MQDC-450 15.2 m (50 ft)

MQDC-406RA 1.83 m (6 ft)

Right-Angle

32 Typ.[1.26"]

30 Typ.[1.18"]

ø 14.5 [0.57"]M12 x 1

MQDC-415RA 4.57 m (15 ft)

MQDC-430RA 9.14 m (30 ft)

MQDC-450RA 15.2 m (50 ft)

Brackets

For use with T8L models:SMB8MM

For use with M18 and T18models or base-mount T30models:

• SMB18A• SMB1815SF• SMB18Q• SMB18SF• SMB312PD• SMBAMS18RA• SMBAMS18P

For use with T30 models orbase-mount K50L models:

• SMB30A• SMBAMS30RA• SMBAMS30P• SMB30SC• SMB30MM• SMB3018SC

DIN-mount bracket for K80Lmodels:

SMBDX80D

For more information about these and other available brackets, visit www.bannerengineering.com. K50FL models include a 48 mm(1.9") circular hook-and-loop mounting kit for easy mounting with no additional hardware required.

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair orreplace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does notcover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OFMERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TOBUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGESRESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previouslymanufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when theproduct is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp willvoid the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation atany time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

EZ-LIGHT® One-Color General-Purpose Indicators

© Banner Engineering Corp. All rights reserved