eyesite Bar Attachment - steelcase.com Determine in advance where you want to ... eyesite Bar...
2
If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500) Or visit our website: www.steelcase.com © 2015 Steelcase Inc. Grand Rapids, MI 49501 U.S.A. Printed in U.S.A. Page 1 of 2 23125101 Rev B ™ SINGLE BAR DUAL BAR FOCAL ADJUSTMENT SINGLE DIRECT MOUNT Static Bar Mounting, Dual and Triple Non-Focal Adjustment 1 Determine in advance where you want to position your monitor. Align teeth of monitor mount bracket assembly with slots located in the column (1a). Angle the teeth into the slots (1b) and swing monitor mount bracket assembly inward (1c). With teeth engaged in slots, press downward onto the monitor mount rail assembly (1d). COLUMN COLUMN SLOT TOOTH MONITOR MOUNT BRACKET ASSEMBLY Side Views 1b 1c 1a 1d COLUMN Note: Dual Focal Adjustable shown here.Other applications are similar. 2 2a LOCKING SCREW SUPPLIED ALLEN WRENCH Locate the locking screw under the monitor mount bracket assembly and tighten using the "ball end" of the supplied Allen wrench (2a). As you tighten the locking screw, the tooth of the monitor mount bracket assembly will begin to move upward inside the column and tighten against the wall of the column locking the monitor mount bracket. eyesite Bar Attachment 5/32" Allen Wrench (provided) COLUMN TOOTH MONITOR MOUNT RAIL ASSEMBLY ®
Transcript of eyesite Bar Attachment - steelcase.com Determine in advance where you want to ... eyesite Bar...
If you have a problem, question, or request, callyour local dealer, or Steelcase Line 1 at888.STEELCASE (888.783.3522)for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)Or visit our website: www.steelcase.com© 2015 Steelcase Inc. Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
Page 1 of 223125101 Rev B
™
SINGLE BAR DUAL BAR FOCAL ADJUSTMENTSINGLE DIRECT MOUNT
Static Bar Mounting, Dual and Triple Non-Focal Adjustment
1 Determine in advance where you want to position your monitor.
Align teeth of monitor mount bracket assembly with slots located in the column (1a). Angle the teeth into the slots (1b) and swing monitor mount bracket assembly inward (1c). With teeth engaged in slots, press downward onto the monitor mount rail assembly (1d).
COLUMN
COLUMN SLOT
TOOTH
MONITOR MOUNTBRACKET ASSEMBLY
Side Views
1b 1c
1a
1d
COLUMN
Note: Dual Focal Adjustable shown here.Other applications are similar.
2
2a
LOCKINGSCREW
SUPPLIEDALLEN WRENCH
Locate the locking screw under the monitor mount bracket assembly and tighten using the "ball end" of the supplied Allen wrench (2a). As you tighten the locking screw, the tooth of the monitor mount bracket assembly will begin to moveupward inside the column and tighten against the wall of the columnlocking the monitor mount bracket.
eyesite Bar Attachment
5/32" Allen Wrench(provided)
COLUMN
TOOTH
MONITORMOUNT
RAILASSEMBLY
®
Page 2 of 223125101 Rev B
®
3
3a
COLUMNSLOT
COLUMNDetermine in advance where you want to position your two (or 3) monitors.
Align teeth of monitor mount bracket assembly with slots located in the column (3a). Angle the teeth into the slots (3b) and swing monitor mount bracket assembly inward (3c). With teeth engaged into slots, press downard onto the monitor mount rail assembly (3d).
TOOTH
MONITOR MOUNTRAIL ASSEMBLY
Double Non-Focal Adjustment Triple Non-Focal Adjustment
Side View
3b 3c 3d
COLUMN
MONITORMOUNT
BRACKETRAIL ASSEMBLY
COLUMN
TOOTH
