EyE & HueDJ Tutorial
-
Upload
yantouch-corp -
Category
Devices & Hardware
-
view
599 -
download
0
Transcript of EyE & HueDJ Tutorial
EyE & HueDJ Tutorial
Ken 2/2017
Tips: Charging
1. With power on It takes about 4 hours Plug In Green light>85%
2. With power off: Upside down on pouch
3. With power off: Cradle on Lining Blister in EyE box. Green light=100%
How to pair stereo?
RightSecondary
LeftPrimary
1. Turn On Right2. Turn On Left
3. Auto Pairing
4. Phone pair to Primary Speaker
Steps 1 & 2
Phone not yet paired
2. Turn on second speakerWhen on EyE Pulses Blue
1. Turn on first speaker Pull down on kickstand to turn on
EyE will Pulse Blue
Step 3
RightSecondary
LeftPrimary
Right becomes Solid Blue
3. Auto Pairingin 30 seconds or less
Speakers will beep when linked
Left remains Pulsing Blue
Phone not yet paired
Step 4
RightLeft
4. Phone pair to Lefte.g. “Eye1-58 yantouch E10”
When left speaker and phone are paired,left speaker will beep and become solid blue Right speaker stays solid blue
#58 #59
Download HueDJ
iOS App Store Android Google Play
http://www.yantouch.com/app-huedj/
HueDJ Overview
4 Modes
Virtual Remote
Tutorial &App Information
BluetoothStatus & Setup
iOS: Must connect from system Bluetooth under settings
Android: Can connect from this Bluetooth setup directly
Bluetooth Setup
Battery: #58 >85%
85%> #59 >50%
EyE singleConnect Light & Sound
Group selection
EyE pair: Left #58 as MasterConnect Light only
#58 #59
Group2
Battery: 85%> #61 >50%
#61Group1
Battery Status
<15%
85% - 15%
>85%
Bluetooth Setup Virtual Remote Physical Remote
Sync LightingVirtual Remote Physical RemoteHue/DJ mode
SyncSync
White LightingVirtual Remote Physical RemoteHue/DJ mode
WhiteWhite
White
Brightness ControlVirtual Remote Physical RemoteHue mode
Dim control
Dim controlDim control
Light Off/OnVirtual Remote Physical RemoteHue/DJ mode
Light off
Tap dark area
Light off/on Light off/on
Special buttons
Light off
Virtual Remote Physical Remote
Power offTurn EyE offTo turn back onMust use Physical Remote to turn on Idle
Set EyE idleLight/sound off,Tap any buttonto bring back
Set EyE PinkHome key to setEyE to most saturatedBrightest Pink Pink
Pink
Check EyE Status Green: Power onBlue: Bluetooth linkedOrange: Wake/alarm set
StatusStatus
Power on/off
Tips: Lighting Controls
1. When get lost of color/brightness: hit “Pink” to go home (or to control many EyE to pink)
2. To get 400 lumen reading light: hit “White”, then “Bright” (light flashes to show maximum)
3. To know if Wake alarm is set: hit “Status”, an Orange dim light indicates it’s set
4. To prevent slow song that keep annoying sync: Toggle “Sync”, Blue for slow song
5. To hear music without lighting: hit “Dark”
1.Pink4.Sync 3.Status
2.White
Bright5.Dark
Hue Mode
Wake Mode
Sleep Mode
DJ Light Grouping
Group 1 Group 2
Group 3
Pair
DJ Mode buttons
1. Group1 Color Disc/Wheel: Tap to choose the color you like your EyE to shine2/3/4. Group2/3/4:
- iOS: supports 3 groups, max 3 pairs or 6 EyE- Android: 4 groups, max 7 pairs or 14 EyE
5. Bluetooth setup: to assign/edit EyE to each group6. LMV list: View recorded Light/Music/Voice list7. Sync: Enable auto light pattern based on music tempo8. Hold: Solid light, best for slow beat music9. Strobe: Burst/Flash light, best for fast beat music10. Record: Light/Music/Voice recording11. Music list: Open your phone local music library12. Microphone: Voice recording enable13/14. Play/Stop: play/stop Light/Music/Voice
1.2.
3.
1. 2.
3. 4.
6. 7.
8. 9. 10. 11.12. 13. 14.
5.
DJ Mode 1: Auto Sync
1. Select a song from library- Songs on phone only, not on cloud
2. Hit Sync button: for auto light show based off of song beats. Color shown at the start indicates the light respond speed.
Hit again to toggle the speed:- Green Glow: Best for fast beat song- Blue Glow: Best for slow beat song
3. Hit Play: to enjoy auto sync lighting1.
2.
3.
DJ Mode 2: Record Light/Music patterns
1. Select a song from library:2. Select Strobe or Hold button:
- Strobe: Flashes on and off as you tap color wheel, best for fast beat song
- Hold: Remain same color & brightness as you tap, best for slow beat song
3. Hit Record button: to start recording both Music & your DIY Light patterns
4. Play back5. View Library: all recorded
LMV(Light/Music/Voice) pattern list1.2. 3.
4.5.
DJ Mode 3: Record Light/Music & Voice
1. Select a song from library2. Select Strobe or Hold button3. Enable Microphone (Voice)4. Record: LMV (Light/Music/Voice),
including your voice & background sound
5. View Library
1.2.
3.4.
5.
Setup Menu
HueDJversion
Yantouch Store
Tutorial buttonScroll downto view all
www.yantouch.com
TEL: +886 3-5735360Skype: f3.henry.chou
email: [email protected] Facebook: https://www.facebook.com/yantouch.en
Buy Now: http://www.yantouch.com/shop/index.php?route=common/home