Ey4106 unit9 a_week10
-
Upload
joseph-lyster -
Category
Education
-
view
12 -
download
0
description
Transcript of Ey4106 unit9 a_week10
![Page 1: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/1.jpg)
EY4106SUBJECT PEDAGOGICS 1:TECHNOLOGY WOODUnit 9 – Week 10:Health & Safety
Department of Design & Manufacturing TechnologyLecturer/Teacher: Mr. Joseph Lyster Teaching Assistant 1: Mr. Jonathan SpillaneTeaching Assistant 2: Mr. James O’HalloranAcademic Year 2011: Spring SemesterTechnical Support: Mr. Joe Murray
Notes prepared by: Mr. Joseph Lyster
![Page 2: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/2.jpg)
HEALTH & SAFETY
Department of Design & Manufacturing Technology
EY4106
![Page 3: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/3.jpg)
• Section 8(2)e of the 2005 Act states that it is the duty of every employer“to provide systems of work that are planned, organised, performed and maintained so as to be, so far as is reasonably practicable, safe and without risk to health.”
• Health and safety management is a practical and systematic approach to identifying hazards and evaluating the extent of associated risk
Health & Safety Management
Department of Design & Manufacturing Technology
EY4106
![Page 4: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/4.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 5: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/5.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 6: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/6.jpg)
Can be identified by:▫High accident/injury rates.▫Poor machinery guarding.▫Poor cleaning and housekeeping arrangements.▫Limited interest of OHS by employers/management.▫Lack of care/respect for safety rules.▫Poor safety culture.
Unsafe Workplaces
Department of Design & Manufacturing Technology
EY4106
![Page 7: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/7.jpg)
Can be identified by:
•Regular inspection of workplace•Consultation between employer and employees.•Clearly defined structure of responsibilities….•Employees are trained…•Exceeds the specific requirements of the law –
manages safety not for fear of being reprimanded but for the employees.
Safe Workplaces
Department of Design & Manufacturing Technology
EY4106
![Page 8: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/8.jpg)
The Key steps of any Health & Safety Management scheme are:
1. Policy2. Hazard identification3. Risk Assessment4. Control Measures.5. Recording Findings (Safety Statement)6. Monitoring, Review and Auditing
Safety Management
Department of Design & Manufacturing Technology
EY4106
![Page 9: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/9.jpg)
Required Reading
Department of Design & Manufacturing Technology
EY4106
![Page 10: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/10.jpg)
The Safety Management Process
Department of Design & Manufacturing Technology
EY4106
![Page 11: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/11.jpg)
Health & Safety Policy
Department of Design & Manufacturing Technology
EY4106
![Page 12: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/12.jpg)
Health & Safety Policy
Department of Design & Manufacturing Technology
EY4106
![Page 13: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/13.jpg)
More information can be found byconsulting manufacturer’s manual
Department of Design & Manufacturing Technology
EY4106
![Page 14: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/14.jpg)
Health & Safety at Work Act 2005
Pg. 30 of Health & Safety at Work Act
2005
Department of Design & Manufacturing Technology
EY4106
![Page 15: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/15.jpg)
Identify Hazards (Hazard Identification)
Department of Design & Manufacturing Technology
EY4106
![Page 16: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/16.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 17: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/17.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 18: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/18.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 19: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/19.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 20: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/20.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 21: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/21.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 22: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/22.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 23: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/23.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 24: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/24.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 25: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/25.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 26: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/26.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 27: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/27.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 28: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/28.jpg)
Common Machinery/Mechanical Hazards
Department of Design & Manufacturing Technology
EY4106
![Page 29: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/29.jpg)
Wrap Point: (Entanglement)
Department of Design & Manufacturing Technology
EY4106
![Page 30: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/30.jpg)
Shear Point and Cutting Hazards
Department of Design & Manufacturing Technology
EY4106
![Page 31: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/31.jpg)
Crush Points
Department of Design & Manufacturing Technology
EY4106
![Page 32: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/32.jpg)
Ejection Hazards
Department of Design & Manufacturing Technology
EY4106
![Page 33: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/33.jpg)
Other Hazards
Department of Design & Manufacturing Technology
EY4106
![Page 34: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/34.jpg)
Hazards
Department of Design & Manufacturing Technology
EY4106
![Page 35: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/35.jpg)
• You will need to develop a template for your lesson risk assessment.• Strategies will need to be developed to:
Reduce or eliminate risk Demonstrate safe use of machine(s) Teach key learning points relating to machine or process Assess and record pupil learning and competence Ensure adequate supervision of activities
Classroom Risk Assessment:
Department of Design & Manufacturing Technology
EY4106
![Page 36: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/36.jpg)
Room Layout
Department of Design & Manufacturing Technology
EY4106
![Page 37: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/37.jpg)
Room Layout
Department of Design & Manufacturing Technology
EY4106
![Page 38: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/38.jpg)
Room Layout
Department of Design & Manufacturing Technology
EY4106
![Page 39: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/39.jpg)
Room Layout
Department of Design & Manufacturing Technology
EY4106
![Page 40: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/40.jpg)
Assess Risk (Risk Assessment)
Department of Design & Manufacturing Technology
EY4106
![Page 41: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/41.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 42: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/42.jpg)
Risk Magnitude
Department of Design & Manufacturing Technology
EY4106
![Page 43: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/43.jpg)
Risk Assessment
Department of Design & Manufacturing Technology
EY4106
![Page 44: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/44.jpg)
• Hazard • means anything that can cause harm (eg
chemicals, electricity, working from ladders, etc)
• Risk • is the chance, high or low, that
somebody will be harmed by the hazard.
Difference Between A Hazard & Risk
Department of Design & Manufacturing Technology
EY4106
![Page 45: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/45.jpg)
A. Eliminate the Hazard Completely.B. Substitute Hazard with a safer alternative.C. Isolate the Hazard.D. Use engineering controls to reduce risk at the source
(Guarding).E. Provide training on how to avoid risks.& if all that fails…F. Use PPE.
Hierarchy of Risk Control
Department of Design & Manufacturing Technology
EY4106
![Page 46: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/46.jpg)
Importance of being able to Assess Risk
Department of Design & Manufacturing Technology
EY4106
![Page 47: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/47.jpg)
•Exposure to hazard
▫Very Infrequent (< once per annum or less)▫Quite Infrequent (annually/biannually)▫Frequent (quarterly/monthly)▫Quite Frequent (weekly/daily)▫Highly Frequent (continuous daily)
Risk Assessment Considerations
Department of Design & Manufacturing Technology
EY4106
![Page 48: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/48.jpg)
•Likelihood▫Highly Unlikely (practically impossible)▫Quite Unlikely (conceivable but very unlikely)▫Likely (conceivable and could possibly happen)▫Quite Likely (almost certain to happen)▫Highly Likely (certain to happen)
Risk Assessment Considerations
Department of Design & Manufacturing Technology
EY4106
![Page 49: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/49.jpg)
• Consequences
▫Minor Injury/Ill Health ( minor cuts, abrasions etc.)▫ Injury/Ill Health (burns, sprains, minor fractures etc.)▫Serious Injury/Ill Health (breaks, deafness etc.)▫Major Injury/Ill Health (amputations, cancer, multiple breaks
etc.)▫Fatality (one or more fatalities)
Risk Assessment Considerations
Department of Design & Manufacturing Technology
EY4106
![Page 50: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/50.jpg)
▫Knowledge▫Skills▫Training▫Experience▫Attitude
▫Motivation▫Risk perception▫Mental condition▫Physical condition▫Accident proneness
Factors Effecting Likelihood & OccurrenceIndividual Factors
Department of Design & Manufacturing Technology
EY4106
![Page 51: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/51.jpg)
▫Condition of equipment/tools
▫Maintenance regime▫Guarding/hazard
controls▫Workload▫Patterns of work
▫Emergency arrangements
▫Training/ information/ instruction
▫Supervision▫Communications▫PPE
Task factorsFactors Effecting Likelihood & Occurrence
Department of Design & Manufacturing Technology
EY4106
![Page 52: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/52.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 53: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/53.jpg)
Factors Effecting Likelihood of Occurrence
Department of Design & Manufacturing TechnologyDepartment of Design & Manufacturing Technology
EY4106
![Page 54: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/54.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 55: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/55.jpg)
Risk Magnitude Matrix
Department of Design & Manufacturing TechnologyDepartment of Design & Manufacturing Technology
EY4106
![Page 56: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/56.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 57: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/57.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 58: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/58.jpg)
Which Poses the Greatest Risk?
Department of Design & Manufacturing Technology
EY4106
![Page 59: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/59.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 60: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/60.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 61: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/61.jpg)
Risk Magnitude Matrix
Department of Design & Manufacturing Technology
EY4106
![Page 62: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/62.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 63: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/63.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 64: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/64.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 65: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/65.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 66: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/66.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 67: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/67.jpg)
RISK ASSESSMENTLocation: SR2-047 Date: 24-09-2010 Assessment Carried out by: Mr. Joe Lyster
Assessment of: PILLAR DRILL CE Marking (Machines): Yes □ No □
Page 1 of 1 Assessment Review Date: 24-09-2010
HAZARD RISK MAGNITUDE PERSONS AT RISK EXISTING CONTROLS REQUIRED CONTROLS PERSONS RESPONSIBLE TARGET DATE
Weekly etc…
Department of Design & Manufacturing Technology
Risk Assessment Template
EY4106
![Page 68: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/68.jpg)
RISK ASSESSMENTLocation: SR2-047 Date: 24-09-2010 Assessment Carried out by: Mr. Joe Lyster
Assessment of: PILLAR DRILL CE Marking (Machines): Yes □ No □
Page 1 of 1 Assessment Review Date: 24-09-2010
HAZARD RISK MAGNITUDE PERSONS AT RISK EXISTING CONTROLS REQUIRED CONTROLS PERSONS RESPONSIBLE TARGET DATE
1. Entanglement
2. Violent Ejection
3. Piece Spinning
4. Electric Shock Hazards
5. Cuts
6. Inadvertent Starting
7. Space around Machine
8. Tripping/Slipping
9. Pinch Point
10. Falling Table
11. Noise Levels
12. Crushing
Department of Design & Manufacturing Technology
EY4106
![Page 69: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/69.jpg)
1. ENTANGLEMENTSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 70: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/70.jpg)
2. VIOLENT EJECTIONSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 71: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/71.jpg)
3. PIECE SPINNINGSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 72: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/72.jpg)
4. ELECTRIC SHOCKSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 73: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/73.jpg)
5. CUTSSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 74: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/74.jpg)
6. INADVERTENT STARTING
SEVERITYSlightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 75: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/75.jpg)
7. SPACE AROUND MACHINE
SEVERITYSlightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 76: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/76.jpg)
8. TRIPPING/SLIPPINGSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 77: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/77.jpg)
9. PINCH POINTSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 78: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/78.jpg)
10. FALLING TABLESEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 79: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/79.jpg)
11. NOISE LEVELSSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 80: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/80.jpg)
12. CrushingSEVERITY
Slightly Harmful
Moderately Harmful
Quite Harmful
Very Harmful
Extremely Harmful
LIKELIHOO
D
Highly Unlikely Trivial Tolerable Tolerable Moderate Moderate
Quiet Unlikely Tolerable Tolerable Moderate Moderate Substantial
Likely Tolerable Moderate Moderate Substantial Substantial
Quite Likely Moderate Moderate Substantial Substantial Intolerable
Highly Likely Moderate Substantial Substantial Intolerable Intolerable
Department of Design & Manufacturing Technology
EY4106
![Page 81: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/81.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 82: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/82.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 83: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/83.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 84: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/84.jpg)
Department of Design & Manufacturing Technology
EY4106
![Page 85: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/85.jpg)
RISK ASSESSMENTLocation: SR2-047 Date: 24-09-2010 Assessment Carried out by: Mr. Joe Lyster
Assessment of: PILLAR DRILL CE Marking (Machines): Yes No □□̷�
Page 1 of 1 Assessment Review Date: 24-09-2010
HAZARD RISK MAGNITUDE PERSONS AT RISK EXISTING CONTROLS REQUIRED CONTROLS PERSONS RESPONSIBLE TARGET DATE
1. Entanglement Intolerable User of Machine Securing Clothes/Hair Chuck Guard Teacher/Students 24-09-2010
2. Violent Ejection Moderate All in Class Spring Loaded Chuck Chuck Guard Teacher/Students 24-09-2010
3. Piece Spinning Moderate All in Vicinity Clamp Correct Clamping Teacher/Students 24-09-2010
4. Electric Shock Hazards Moderate User of Machine Inspection of
EquipmentRegular Inspection of electrical components
Teacher/Students 24-09-2010
5. CutsModerate User of Machine Training
Exclusion zones marked clearly in
relation to work areaTeacher/Students 24-09-2010
6. Inadvertent Starting Moderate All in Vicinity Lockable Isolator
SwitchLock isolator in the off position when not in
useTeacher/Students 24-09-2010
7. Space around Machine Substantial User of Machine Nothing
Safe work area exclusion zone marked
around machineTeacher/Students 24-09-2010
8. Tripping/Slipping Moderate User of Machine Nothing Sign posts Teacher/Students 24-09-2010
9. Pinch Point Substantial User of Machine Nothing Chuck Guard Teacher/Students 24-09-2010
10. Falling Table Moderate User of Machine Pillar Post Lock Handle Correct Locking/Clamp Teacher/Students 24-09-2010
11. Noise Levels Trivial All in Class Nothing PPE & Sign posts Teacher/Students 24-09-2010
12. Crushing Intolerable All in Vicinity Nothing Secure Fixing Teacher/Students 24-09-2010
Department of Design & Manufacturing Technology
EY4106
![Page 86: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/86.jpg)
CLASSROOM MANAGEMENT:
Health & Safety…
Department of Design & Manufacturing Technology
EY4106
![Page 87: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/87.jpg)
• Students should only work in a high risk area when it is fully under the control of a person competent to work in and supervise that area.
• Close monitoring of students using machinery.• Students must not be permitted to use equipment while
unsupervised.• It is the responsibility of the schools to ensure that the
machines are not accessible to unauthorised persons▫Cleaners▫Visitors▫Unsupervised students.
Supervision & Access
Department of Design & Manufacturing Technology
EY4106
![Page 88: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/88.jpg)
Supervision & Access
Department of Design & Manufacturing Technology
EY4106
![Page 89: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/89.jpg)
Supervision & Access
Department of Design & Manufacturing Technology
EY4106
![Page 90: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/90.jpg)
• An assessment of each workshop should be carried out in order to determine the safe operational area around each machine.
• Hard wearing and clearly visible markings should be set down on the floor to indicate these safe operation areas.
• If necessary, machines should be moved to accommodate this safe operational area.
Exclusion Zones
Department of Design & Manufacturing Technology
EY4106
![Page 91: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/91.jpg)
Emergency Isolators and Emergency Stops
Department of Design & Manufacturing Technology
EY4106
![Page 92: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/92.jpg)
Start/Stop• Are there appropriate start / stop controls ?• Location• Colour• Flush mounted• Mushroom head
▫ Turn release▫ Key release
Department of Design & Manufacturing Technology
EY4106
![Page 93: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/93.jpg)
Stop control must have priority over the Start control.
Start Control Flush Recessed
Stop Control Mushroom Head Push Bar
Start/Stop
Department of Design & Manufacturing Technology
EY4106
![Page 94: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/94.jpg)
Some machines may have two stopping devices.
Hand Operated
Foot/Knee Operated
Emergency Stop
Department of Design & Manufacturing Technology
EY4106
![Page 95: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/95.jpg)
Material Preparation
Department of Design & Manufacturing Technology
EY4106
![Page 96: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/96.jpg)
Machine guards must:▫ Be of robust construction.▫ Not give rise to any additional hazard.▫ Not be easily removed or rendered inoperative.
(Removed with the use of a tool)▫ Be situated a sufficient distance from the danger zone.▫ Not restrict more than necessary the view of the operating cycle of the
equipment
Guarding
Department of Design & Manufacturing Technology
EY4106
![Page 97: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/97.jpg)
Lighting
Department of Design & Manufacturing Technology
EY4106
![Page 98: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/98.jpg)
Push Sticks
Department of Design & Manufacturing Technology
EY4106
![Page 99: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/99.jpg)
Maintenance of Machinery
Department of Design & Manufacturing Technology
EY4106
![Page 100: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/100.jpg)
Preventative Maintenance
Department of Design & Manufacturing Technology
EY4106
![Page 101: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/101.jpg)
Maintenance Records
Department of Design & Manufacturing Technology
EY4106
![Page 102: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/102.jpg)
Inspection of Machinery
Department of Design & Manufacturing Technology
EY4106
![Page 103: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/103.jpg)
Inadvertent Starting
Department of Design & Manufacturing Technology
EY4106
![Page 104: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/104.jpg)
Machinery Rundown Time
Department of Design & Manufacturing Technology
EY4106
![Page 105: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/105.jpg)
The CE Marking is not a mark indicating conformity to a standard but rather a mark indicating conformity to the legal requirements of EU Directives.
CE Mark
Department of Design & Manufacturing Technology
EY4106
![Page 106: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/106.jpg)
• CE Marking is the symbol as shown on the top of this page. • The letters "CE" are the abbreviation of French phrase
"Conformité Européene" which literally means "European Conformity". • The term initially used was "EC Mark" and it was
officially replaced by "CE Marking" in the Directive 93/68/EEC in 1993.
CE Mark
Department of Design & Manufacturing Technology
EY4106
![Page 107: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/107.jpg)
• Machinery must bear the “CE” mark in order to be deemed in compliance with these regulations.
• Must not add to machinery – must be there… criminal offence to try to add it.
• Also an offence to reduce the visibility of the “CE” Marking on a machine.
CE Mark
Department of Design & Manufacturing Technology
EY4106
![Page 108: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/108.jpg)
The existence of the “CE” marking on a piece of machinery should indicate that its manufacturer has met all relevant standards and requirements.
CE Mark
Department of Design & Manufacturing Technology
EY4106
![Page 109: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/109.jpg)
Never assume that machinery is safe just because it has a “CE” marking
CE Mark
Department of Design & Manufacturing Technology
EY4106
![Page 110: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/110.jpg)
Mandatory/Action
Regulatory/Prohibited
Emergency/Permission
Warning/Caution-Danger
Department of Design & Manufacturing Technology
EY4106
![Page 111: Ey4106 unit9 a_week10](https://reader038.fdocuments.in/reader038/viewer/2022102721/5456fa94af7959b6358b6514/html5/thumbnails/111.jpg)
Department of Design & Manufacturing Technology
EY4106