extrud3 solutions is an architectural 3D imaging & complete engineering design company utilizing the most popular software in the industry such as Sketch-Up, 3D Studio Max, STAAD, ETABS, AutoCAD

Services

3D Architectural Perspective, Interior Perspective & AutoCAD Drafting

Structural Design

Electrical Design

Sanitary & Drainage Design

Office Interior Perspective

3D Perspective of a proposed Car Park Building

Monorail Perspective

3D Perspective of a proposed Car Park Building

Outdoor Theme Park Perspective

Coffee Shop Perspective, nature of work also includes conception and interior planning of the stall

Structural design of All- steel parking for Greenhills Shopping Center including steel floor pallets and special steel flooring for ramp.- 2009 Project Cost=Php45M

Structural design of cooling tower & generator support and 4-level elevator shaft at Greenhills Shopping Center Connecticut car park Project Cost=Php8M

Structural design of 1 level parking structure at Greenhills Shopping Center(Steel-truss type)Project Cost=Php90M

Structural Design of framing and cables of Alabang Tent-2007 Project Cost=Php800T Structural design of Fonterra Verde, Halo-Gateway Project Cost=Php9M Structural Design of Subic Tree Top Adventure Restaurant and Tree Platforms Structural Design and project engineering for Greenhills Shopping Center Connecticut Car

Park Additional 4th floor, design includes retrofitting strategy for footing -2007 Project Cost=Php51M

Structural Design of 12 hectare Nestle-SDC Warehouse with 30m span truss requirement-2006- Project Cost=Php25M

Structural Design of Steel Truss type 40m long Katipunan Ave.-Footbridge-2006 Structural design and supervision Loyola Grand Villas Badminton Court

STRUCTURAL DESIGN WORKS FOR NWSTEEL TECH.

Structural evaluation and rectification design of ABB-TDA building Design of Steel Framing and foundation of Various SHELL Canopies and 2 Storey Administration

Buildings (15 sites). Design of steel frame and concrete foundation for Caltex-Mamplasan Cluster B, C and D Building/Mall

including the 25 Meter high tubular Steel Pylon. Design of a 32 m high truss-type (60ft long x60ft wide) billboard including foundation for APY Land-

holdings. Design of concrete frames, steel truss and foundation for 5 sites of 3-storey DepEd Division Office

(Batanes, Benguet, Kalinga, Aurora, NEAP- Baguio) Design and detailing of Steel Framing of the 15-meter high Divine Mercy Statue on Cagayan De Oro. Design and cost estimate of Shell CNG Station’s 6 meter high firewall, Gas Pump Canopy, Radiation

Impingement plate, Mat Foundation for the Fuel Cell and 1 Storey admin building. Preliminary Structural Evaluation/ Value Engineering of the 14 storey residence for Pasay City Build-

ing. Value Egineering of 1 DepED Site Foundation design (Apayao).

STRUCTURAL DESIGN WORKS FOR AMH Philippines

Structural analysis and design (including response spectrum analysis) of a 5 storey concrete building for DMCI Homes Project In Quezon City through AMH Philippines- July 2008. Used ETABS 9.0.4 and STAAD Pro 2007 for design comparison. Structural Design of 3-3 storey Muntilupa High School 2009, Muntinlupa City, Used ETABS 9.0.4 Design of 10 Storey High Concrete Obelisk for(30m) Zamboanga Sibugay-2009

Preliminary Engineering feasibility study for future sites of Latter Day Saints Churches at Vigan,Ilocos Sur; Banged, Abra; Laoag Ilocos Norte, Lagangilang, Abra for SOILS inc. Structural designer or consultant for various residential houses for Arch. Fedore Yap and Associates from 2006- present Renovation of Punta Fuego Hotel, Nasugbu Batangas 4 Storey Singson’s Dormitel Project at Makati City-2008 Del Monte Motor Works Bus Plant at San Fernando, Pampanga-2007 The Peak Model house at Punta Feugo, Taal, Batangas-2006 Postrado 2- storey Residence at Makati City-2007 Morales 2-Storey Residence at Balara, Quezon City-2007 2 storey Alberto Pastor Medical Center at Batangas City- 2007 2 storey Harry Ong Residence- 2007 2 Storey Rommel Saludez Residence at Portofino Heights at Paranaque City-2007 Lucindo House Extension at Marikina City-2007

Structural calculation for Agapito Residence (Binangonan, Rizal)-2004 for Arch. Efi Dela Cruz. Structural Modeling of the tubular steel frame and Construction drawing plans preparation for the proposed Lapu-lapu monument at Rizal Park.-2003 Structural Design(concrete structure) of 4 Storey Juan Sajid Imao Residence and workshop at Marikina City-2004 Design of a Circular World War 2 Museum(concrete structure) at Cabanatuan, Nueva Ecija Structural (STAAD) modeling for a badminton court truss and frame system (Mandaluyong City)-2003 Prepared a standard structural design(concrete structure) for RVP Architects for 5 sites– 2 storey subdivision residence located at Lucena City as Commissioned by Calmar Land Development Corporation.-2005 Structural Design of 2 Storey Galvez Residence at

VARIOUS STRUCTURAL DESIGN WORKS

A structural engineering practitioner, he has various experiences in all types structural building materials and building types such as billboards, residential building, multi-storey buildings, parking structures, com-mercial buildings, warehouse and industrial plants as well as gantry cranes and towers. Educated in the University of the Philippines, Diliman, he had engineering experiences not only as struc-tural engineer but worked as cost estimator, steel detailer and project scheduler & manager.

ERNEST CHRISTIAN E. NANOLA

MARK EMMANUEL E. NANOLA

An architectural planner and designer, his works ranges from actual planning and layouting of building structures and transforming them into comprehensive construction plans and into a 3D model through SketchUP and 3D Studio Max.

For inquires and quotations:

extrud3solutions@gmail.com

estonmeyer@yahoo.com

09228499948

09178398979

VARIOUS STRUCTURAL DESIGN WORKS PICTURES

A professional electrical engineer with more than 30 years various experience in designing electrical system including residentail , commercial, medium rise and high rise building. He graduated from MAPUA Institute of Technology in 1983 and a lifetime member of Institute of Integrated Electrical Engineers of the Philippines (IIEE), and a member of National Association of Electricity Consumers for Reforms, Inc.

FEDERICO M. MOSE JR. PROFESSIONAL ELECTRICAL ENGINEER

EDSEL EDRA CIVIL/SANITARY ENGINEER

He is a seasoned sanitary engineer with experiences in designing single storey houses to multi-storey building. He finished his civil engineering degree from TIP and sanitary engineering degree from National University.