Extensive Range of Products Increase in Stocks Sizes ... · Extensive Range of Products Increase in...

Volume 1

Extensive Range of ProductsIncrease in Stocks Sizes & Varieties

Standard Components for Plastic Mold

MISUMI World Network

International SupportMISUMI Corporation Press Die Components Team TEL: 81-3-3647-7114 FAX: 81-3-3647-7030

MISUMI USA, INC.

MISUMI UK LTD.

MISUMI EUROPA GmbH

MISUMI(THAILAND) CO., LTD.

MISUMI KOREA CORP.

MISUMI TAIWAN CORP.

SHANGHAI MISUMIPRECISION MACHNERY CO., LTD.

MISUMI E.A. HK LTD.

MISUMI SOUTH EAST ASIA PTE.LTD.

MISUMI MALAYSIA SDN. BHD.

TEL: 1-847-843-9105

TEL: 44-1784-465530

TEL: 49-0-700-9994-1670

TEL: 66-38-959-200

TEL: 82-2-551-3611

TEL: 886-2-2570-3766

TEL: 86-21-6391-7080

TEL: 852-2375-4550

TEL: 65-6733-7211

TEL: 603-7960-8499

FAX: 1-847-843-9107

FAX: 44-1784-466695

FAX: 49-0-700-9994-3600

FAX: 66-38-959-202

FAX: 82-551-4811

FAX: 886-2-2570-3767

FAX: 86-21-6391-7085

FAX: 852-2302-4589

FAX: 65-6733-0211

FAX: 603-7960-7499

MISUMI Corporation4-43, Toyo 2-chome, Koto-ku,Tokyo 135-8458 JapanTel: +81-3-3647-7111 Fax: +81-3-3647-6241http://jp.misumi-ec.com/

MISUMI USA, INC.1717 Penny Lane, Suite 200, Schaumburg,Illinois 60173 USATel: +1-847-843-9105 Fax: +1-847-843-9107http://us.misumi-ec.com/Customer Service: [email protected] Inquiries: [email protected]

MISUMI KOREA CORP.3804 World Trade Center 159-1,Samsung-dong, Kangnam-gu, Seoul,135-729, KoreaTel: +82-2-551-3611 Fax: +82-2-551-4811http://kr.misumi-ec.com/[email protected]

MISUMI EUROPA GmbHKatharina-Paulus-Strasse 6, 65824 Schwalbach,GermanyTel: +49-6196-7746-0 Fax: +49-6196-7746-360http://[email protected]. OfficeTel: +44-20-3051-4809Rappresentanza Italiana OfficeTel: +39-02-6203-2225

MISUMI E.A.HK LTD.香港三住有限公司3/F., Malaysia Building, 50 Gloucester Road,Wanchai, Hong KongTel: +852-8303-2781 Fax: +852-8303-2782

MISUMI (CHINA) PRECISIONMACHINERY TRADING CO., LTD.米思米 (中国) 精密机械貿易有限公司16th Floor, Jinling Hai Xin Bldg,No666 Fuzhou Rd., Shanghai 200001 P.R. ChinaTel: +86-21-6391-7080 Fax: +86-21-6391-7085Shanghai: http://cn.misumi-ec.com/Guangzhou: http://cn2.misumi-ec.com/[email protected] OfficeTel: +86-20-8527-1038 Fax: +86-20-8527-1686Tianjin OfficeTel: +86-22-2302-9228 Fax: +86-22-2302-9350Wuxi OfficeTel: +86-510-8521-7176, +86-510-8521-9793Fax: +86-510-8521-9651Shenzhen OfficeTel: +86-755-8287-2420 Fax: +86-755-8287-2096Ningbo OfficeTel: +86-574-8706-6835 Fax: +86-574-8706-6839

Gurgaon OfficeTel: +0124-424-1662Chennai OfficeTel: +91-20-6647-0000 Fax: +91-20-6647-0000

MISUMI INDIA Pvt. Ltd.3rd Floor, ONYX Building, North Main Road,Koregaon Park, Pune -411001 Maharashtra, IndiaTel: +91-20-6647-0000 Fax: +91-20-6647-0050http://[email protected]

MISUMI (THAILAND) CO., LTD.300/24 Moo 1, Eastern SeaboardIndustrial Estate Soi 5, Tambol Tasith,Amphur Pluakdaeng, Rayong Province 21140, ThailandTel: +66-38-959-200 Fax: +66-38-959-202http://[email protected]

MISUMI TAIWAN CORP.台灣三住股份有限公司9F-1,No.126, Nanjing East Road Sec.4,Taipei 10595 Taiwan R.O.C.Tel: +886-2-2570-3766 Fax: +886-2-2570-3767http://tw.misumi-ec.com/[email protected]

MISUMI SOUTH EAST ASIA PTE. LTD.331 North Bridge Road, #05-03, Odeon Towers,Singapore 188720Tel: +65-6733-7211 Fax: +65-6733-0211http://sg.misumi-ec.com/[email protected]

Representative Vietnam Office (Ho Chi Minh)Tel: +84-8-5-4499555 Fax: +84-8-5-4499559

MISUMI MALAYSIA SDN BHDUnit 1206, 12th Floor Menara Amcorp No.18, Jalan Persiaran Barat 46050 Petaling Jaya, Selangor, MalaysiaTel : +603-7960-8499 Fax : +603-7960-7499http://my.misumi-ec.com/[email protected]

Standard Components for Plastic M

old 2011 Volume 1

Ejector Pins, Ejector Sleeves &Core PinsCODE: EPH EPHJ ERPH ESNV ESN CPD CPH etc. P. 1~24

Angular PinsCODE: AP APZ APU APUS etc. P. 25~30

Leader Pins & BushingsCODE: GPH GBH GBS GBHE GBSE GBAM GBBM P. 67~74

Ejector Leader Pins & BushingsCODE: EGH EGHC EGBH EGBZ EGBLT EGBB etc. P. 85~91

or Sleeves &

SGP StockSGP Stock

SGP StockSGP Stock

SGP StockSGP Stock

SpringsCODE: WY WR WF WL WT WM WH SWY SWU SWR SWS SWF SWL SWM SWH SWB SWG WSW P. 166~192

MicroswitchCODE: EGS-ANGLE EGS-AV EGS-BOARD V-15-1A5-T etc. P. 93~94

Cooling ItemsCODE: KPM JPJ F120-PM NPL M-POC JTW WCP BFP ORG etc. P. 125~152

Parting LocksCODE: PL PLBS PLH PLL PLM PLS PLSZ PLSW MPLK MPLKH MLK MLKC P.25~116

PLASTIC MOLD STANDARD COMPONENTS

Visit www.my.misumi-ec.com (MISUMI MALAYSIA) or www.sg.misumi-ec.com (MISUMI SOUTH EAST ASIA)*Warehouse is located in Singapore.

Product information are also available on our website.

COMPONENTS

HIGHLIGHT

Sprue Bushings & LocatingRingsCODE: SBBK SBBP SBGK SBSD LAR LRBW LRK etc. P. 47~52

Taper Pin SetsCODE: TPN TPNV VTPN TPNC TPV TPNF TPNFC TPVX etc. P. 75~81

P 67 74P 67 74P. 67~74

SGP StockSGP Stock

rting Locks

SGP StockSGP Stock

SGP StockSGP Stock

WT WWY WR WF WWL WSWB SWG WWSW6 192

WY WR WF WWL WWT WWWY WR WF WWL W

SGP StockSGP Stock

Additional 800 Stock Items Total 2800 Items in Stock now

Delivery Shorten!

WIDE RANGE of TOP QUALITY

highlight page_last.ai 6/3/2011 7:27:56 PM

Line-up of Standard Components for Plastic Mold

Stepped Ejector PinsP.9~

Free Flange-position Ejector PinsStraight Ejector PinsP.1~

Rectangular Ejector PinsP.13~

Ejector SleevesP.15

Straight Center Pins

Steel Plates

Straight Core PinsP.23~

Taperless Center PinsStepped Center Pins

Steps-type Round Core Pins Taperless Core Pins Shaped Inlay Core Pins for Boss

Date Marked PinsCRecycle Marketed PinsCPins with Gas VentBlock Core PinsCCavity Inserts

Angular PinsCLocking BlocksP.25~

Slide CoresCLoose CoresP.31~

Guide RailsCCenter Rails

Sprue Bushings·Locating RingsP.47~

Components of RunnerP.53~

Components of GateP.59~

ElectrodesP.65~

Leader ComponentsP.67~

Components for PositioningP.75~

Components for Ejector SpaceP.85~

Couplers·Quick Fitting JointsP.121~

Mold Opening ControllersP.95~

JointsCHosesCCooling inside of moldP.140~

Heat Insulation SheetsHeating ItemsP.153~

Mold AccessoriesP.154~

BoltsCScrewsCWashersP.155~

Chemical Products

Components of Large MoldCoil SpringsP.163~

Components of Die Casting

Cover 2_page 00 Mold.ai 6/2/2011 9:37:27 AM

How to Start Business with MiSUMi

How to Order

For New Customers

Fill out the Customer Registration Form and send it to the Customer Service Department either by fax or e-mail. You

will receive your customer code once the registration procedure is completed.

For Existing Customers

1. Send in your inquiry with the details of your order (Misumi part no. & Quantity) together with your company details

to our Customer Service by fax or e-mail.

2. Our Customer Service will send you the quotation.

3. After confirmation of the price and delivery date, please send in the Official PO.

*For customers without credit terms, payment is to be made after PO confirmation.

Time of delivery stipulated in catalog might delay in case of stock shortage and/or required

Order received after 3pm will be treated as next working day order.

Warehouse is located at Tuas, Singapore.

Delivery

Singapore Malaysia Other Countries Destination

Non-stock Delivery as shownon each page

Stock 1 day + 2 days

Depends on yourcourier service

Express Delivery Fee

Kindly contact our customer service for the express delivery charges for your country.

The above conditions only applicable to Singapore area. Please contact our subsidiary in your country for details.

Changing or Canceling Orders

Changing or canceling orders (the Cancellation) is treated according to the shipment date and the timing when you make the cancellation. Cancellation charges will be imposed in some cases. Pleasecontact our subsidiary in your country for details.

•Items with logo

No cancellation is accepted.

•Items with 4 logo or logo shows longer days

Please refer to the table of the cancellation and shipment date below. Cancellation is acceptable with or without charges

(40% of product cost) depending on the timing of the cancellation.

Please contact our subsidiary in your country for details.

Returning and Replacing Goods•Item with logo can be returned. Administration charges applicable and customer is kindly request to contact our customer service prior making the return. Please note that the delivery cost of returning goods to the destination we determined must be paid by the customer.•Items with logo or logo shows longer days, cannot be returned as they have been manufactured-to-order.•When the received goods differ from the placed order, please contact our subsidiary for the replacement.

Please note that the above returning and replacing of goods are subjected to terms and conditions.

About Express Delivery ServicesThis system shortens the production time so that your order can be shipped out faster.

•To meet your urgent orders, we offer expedited services for many products. Our Express Delivery Services are available for the products marked with one of the symbols below. Depending on the specifi cations / dimensions of a product, the services may not be available. Before placing an order, please confi rm the service availability indicated on the product pages.

Special Emergency Service [Express T]

•[Express T] is a special emergency service that allows orders to be shipped out after 2business days of your order.

•Please note that this service might not be available depending on the order volume.

Reception Time of Emergency Service System [Express]

•Request for Express Services must be received before the following dead line. From 9:00 a.m. to 10:00 a.m. fo [Express T], by 3:00 p.m. for [Express A] and by 5:00 p.m. for [Express B and C]. Please note that orders placed after the above timings will be treated as next day orders.

Express T Express A Express B Express C

Emergency System

Orders Received By 10:00 a.m. By 3:00 p.m. By 5:00 p.m.

Shipped Out After 2 Business Days of Your Order After 3 Business Days of Your Order After 5 Business Days of Your Order After 7 Business Days of Your Order

Express T Express A Express B Express C

12

6

9 3

10AM

PM9

8

6

3

12

PM

12

3

6

9

5

•[Express T] orders must be placed by 10:00 a.m. Please use [Express A] (After 3 Business days of your order) after 10:00 a.m.

• Changes or cancellation after ordering of [Express T] will not be accepted. Changes or cancellation of Express A, B and C varies depending on the time.

•"Shipped out", "Shipment" denotes the required actual business days before the product is shipped.

• Please note that the actual delivery may vary depending on your location. Please consult your local Misumi offi ce for expected arrival dates.

Please note that above delivery days are subject to change depending on the order volume.

•Table of Cancellation and Shipment date

: Cancellation without charge. : 40% of product cost is imposed on the

cancellation.

: No cancellation is accepted.

Catalogue DeliverySchedule and

ServiceDays from the Day of Ordering

Day of Ordering

1 Days Later

2 Days Later

3 Days Later

5 Days Later

6 Days Later

7 Days Later

8 Days Later

4 Days Later

17 Days Later

13 Days Later

14 Days Later

15 Days Later

16 Days Later

12 Days Later

11 Days Later

10 Days Later

9 Days Later

21 Days Later

20 Days Later

22 Days Later

5 DaysCatalog Item

7 DaysCatalog Item Express CExpress BExpress A

12 DaysCatalog Item

9 DaysCatalog Item

8 DaysCatalog Item

14 DaysCatalog Item

18 DaysCatalog Item

22 DaysCatalog Item

6 DaysCatalog Item

Shipment Date

Shipment Date

Shipment Date

18 Days Later

19 Days Later

3 DaysCatalog Item

Shipment Date

4 DaysCatalog Item

Shipment Date

16 DaysCatalog Item Express T

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

Shipment Date

+ 2 days

iii

how to start business with misumi.ai 6/3/2011 5:41:42 PM

4mm(T4)

6mm(JIS)

4mm(T4)

6mm(JIS)

EHS-0.005

Catalog No.

0

EHSJ

EHSE

EHSJE-0.01-0.02

0-0.005N

D

P

R¯0.5

H

P-0.02-0.01

-0.3

0

T 0-0.02

0-5

L+5+0.1

-0

.02

0 EHSJ EHSJE

EHS EHSE

(D¯2 R¯0.3)

(L-N)

H

217

T

-0

.02

T

H

0-0.02

d

TC

0

HCC

0

21 3

H

T

d

H -0

.3HC

0

T d R4 2 36 3 5

T d R1

4 25

6 3

3

EHS

EHSE

EHSJ

EHSJE

NL

P

SK

C

-0.1SKC0

RK

C

RKC -0.10

DKC

DK

C

DKC0

-0.1

KAC -0.1KBC0

WKC0

-0.1

KC -0.10

120B

120B-0.1

120B

KTC0

Ú0.5

0BKGC

AGB 0

-0.1

KGC

3

4

6

4

5

6

8

9

EHSJ

EHSJE

(P )EHS-0.005

0

(P )

EHSE-0.01-0.02

(P )-0.0050

(P )-0.01-0.02

+0.1

Catalog No.LType D

P NH T

1.5

1

2

2.5

3

4

4.5

5

60100

60

100150100150200150200150200150200250150200250150200250

20

20

35

35

100

100

100

100100

100100

100100

125

125

125

80

80

80

90

90

90

90

60

60

6070

7070707070707070

7070

7070

40

40

4040

50

50505050

50

50

50

50

50

(0.4)(0.4)

(0.5)(0.5)(0.5)

0.6 0.8

0.8

0.8

1.0

1.0

1.0

1.0

0.90.9

0.9

0.9

0.6 0.80.70.7

0.7

1.01.21.2

1.2

1.2

1.2

1.3

1.3

1.3

1.1

1.1

1.1

1.5

1.5

1.5

1.6

1.6

1.6

1.7

1.7

1.4

1.4

1.4

1.8

1.8

1.8

2.0

2.0

2.0

2.0

2.1

2.1 2.2

1.9

1.9 2.5

2.5

2.5

2.42.3 2.6

3.0

3.0

(0.3)(0.3)

(0.4)(0.5)0.6 0.80.7(0.3)

150EHS 2

Catalog No. L

1.0

P

70

N

200EHSE 2.5 P1.5 N70

EHS

EHSEEHSJEHSJE

P.i5

Catalog No.

EHS 2 150

L

1.0

P

70

N (KCCWKCEetc)

RKC1

NC

NHC

Code

TC

HCC

Alterations Spec.

NHN

NCW

HC

Type DP L

1

1.5

2.5

2

3

Catalog No.

0.30.40.5

0.7~1.8

0.8~2.1

1.0~2.6

0.30.40.5

0.6~0.8

0.6~1.2

60100

60100150100150100150200150200150200

Type DP L

4

5

4.5

Catalog No.

2.0~3.0

2.0 2.5

3.0

150200250150200250150200250

Price PriceSpec.CodeAlterations

SKC

RKC

DKC

KBCKAC

WKC

KC

KTC

KGC

5

VWC0

-0.02

VKC -0.020

VWC

VKC

High Speed SteelSKH51

-STANDARD TYPE-STEPPED EJECTOR PINS

Step radius(R)

PHead Thickness

Range of guaranteed base material hardness

58~60HRC

SKH51

The figures in( )for P dimensions are applicable for EHS only.

Note that alphabetical characters(P.N)are

not necessary in ordering EHS.

Express

Express AT

Days

Days3

Standard type

Delivery

Order

Alterations

Days Express services not available for NHCCNHNExpress TCA

Single flat cutting

(precision)D/2¯VKC<H/2

Two parallel flats cutting

(precision)D/2¯VWC<H/2

Single flat cutting

D/2¯KC<H/2

Two flats cutting

D/2¯WKC<H/2

Two flats(right angled)cutting

D/2¯RKC<H/2

Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments only

KAC<KBC<H/2

Four flats cutting

D/2¯SKC<H/2

Three flats cutting

D/2¯DKC<H/2

Two flats(angled)cutting

D/2¯KGC<H/2AG=1Bincrements0<AG<360

Three flats cutting

at 120B

D/2¯KTC<H/2

(1)To align the key

flat with the shaft

diameter

Unit of designation

0.05mm increments possible

(2)To designate

arbitrary key

flat dimensions

Unit of designation 0.1mm

IQuantity discount rate

-Quantity

Rate1~49 50~100

5%

U/Price U/Price1~49 1~49

About DesignationUnit for Key Flat Cutting

TC=0.1mm increments T/2¯TC<T,D˘1.5

Dimensions L and N become shorter by(T-TC).

HC=0.1mm increments

D+1¯HC<H,D˘1.5

HCC=0.1mm increments

D+1¯HCC<H-0.3,D˘1.5

Dowel hole boring

Available when H˘4

Combination with other

than NHC/NHN not available.

Dowel hole boring+Spring pin driving

Available when H˘4



Automatic sequential numbering on the head

Combination with SKC not available.

Numbering on the head


rr

1

109

For area out of Singapore please refer to P.i.


The volume discount rate is also applicable to alteration cost.All price & lead time are to be quoted.

iviii

MSWT

B

16

1

L

D

R(PT)MSWTS

MSWT

MSWTS

HOW TO USE CATALOG

KSelect blue characters one by

one from the left to find order

symbols.

KDimensions unnecessary to specify

for order symbols are covered

with blue mesh.

KPrinted in red means Stock

KOrder example

Dimension Table

How to Order

Product Name

Catalog No.

Materials and others

Photograph

Drawing

Page number

Days to ship

Use the Contents page to find the products by

production name and page number.

How to find the product

¡

CAD data

Two-dimensional CAD data(in DXF and

IGES formats)is available for some

products in this catalog. Download the

files from the MISUMI's website.

MISUMI SOUTH EAST ASIA

http://sg.misumi-ec.com/contents/cad/

MISUMI MALAYSIA

http://my.misumi-ec.com/contents/cad/

JIS notation

Thread JIS B 0203

tapered thread for tubing R(PT)*The thread on MSWT No.S is

ANSI B2.2 tapered thread for

American tubing(NPT).

(Tapered type, stainless steel)(Tapered type)

S45C

SUSXM7

32~42HRC

Black Oxide

a:Standard diameter position

KThe indication of JIS standard on the page of each commodity is for reference only and does not signify on-spec

product.

1812 Days10 Days 14 Days8 Days Days

KThe number of days(business days following the day of your order)required before shipping from MISUMI's distribution center in Singapore. P.i

5 Days 7 DaysDays3

Express A BExpress Express CTExpress

KExpress delivery services P.i

Volume discount is also

applicable to alteration fees.

KSelect alterations

with code.

Alteration

KPrices are to be quoted.

KVolume discount rates are available

for most products.

Price

iii-iv-mold.ai 6/2/2011 9:38:55 AM

: Additional sizes/New stock items : Existing stock itemsm Existinms :Contents

PARTING LOCK BUSHINGS .............................................................................................................. 100

PARTING LOCKS .................................................................................................................................. 101

GUIDE FOR PARTING LOCK SETS .................................................................................................... 103

METHOD OF INSTALLING THE PARTING LOCK SET/EXAMPLE OF PLSW OPERATION............... 104

PARTING LOCK SETS ........................................................................................................................ 105

ROLLER LOCK SETS ........................................................................................................................ 109

MAGNET LOCK SETS ........................................................................................................................ 113

TENSION LINKS .................................................................................................................................. 117

SPECIAL BOLTS FOR TENSION LINK/TENSION LINK RETAINERS ............................................. 118

MOLD OPENING PREVENTION PLATES .......................................................................................... 119

GUIDE FOR COOLING COUPLERS .................................................................................................... 121

MOLD COUPLERS ............................................................................................................................. 125

HIGH COUPLERS FOR COOLING PIPE .......................................................................................... 127

DOUBLE VALVES SP COUPLERS FOR COOLING ........................................................................... 130

COUPLERS FOR COOLING WATER.................................................................................................... 131

HOSE NIPPLES .................................................................................................................................. 133

HOSE NIPPLES/L-SHAPED HOSE NIPPLES ..................................................................................... 134

QUICK-FITTING JOINTS FOR MOLD COOLING ................................................................................ 135

COOLING JOINT PLUGS ................................................................................................................... 140

COOLING JOINTS ............................................................................................................................. 141

COOLING PIPES .................................................................................................................................. 142

BAFFLE BOARDS.................................................................................................................................. 145

GUIDE FOR HEAT TRANSACTION PIPES .......................................................................................... 147

HEAT TRANSACTION PIPES/GREASE FOR HEAT TRANSACTION PIPE ........................................ 148

COOLING CIRCUIT PLUGS .............................................................................................................. 149

SCREW PLUGS WITH O-RINGS/TAPERED SCREW PLUGS/SEALING TAPE .............................. 150

O-RINGS ............................................................................................................................................ 151

THERMOCOUPLES ............................................................................................................................. 153

SHOT COUNTERS FOR MOLD ......................................................................................................... 154

SCREW PLUGS .................................................................................................................................. 155

WASHERS/SPACERS ........................................................................................................................ 157

DOWEL PINS ....................................................................................................................................... 159

SOCKET HEAD CAP SCREWS ......................................................................................................... 161

DISTANCE SPACERS ........................................................................................................................ 162

GUIDE FOR COIL SPRINGS .............................................................................................................. 163

(TECHNICAL DATA) INSTRUCTIONS AND NOTES FOR COIL SPRINGS ........................................ 165

WIRE SPRINGS .................................................................................................................................. 166

COIL SPRINGS .................................................................................................................................. 173

GATE-CUT SPRINGS/WASHERS FOR COIL SPRINGS...................................................................... 191

Tooling Map ....................................................................................................................................... 193

Registration Form ............................................................................................................................. 198

How to start business with Misumi ................................................................................................................... i

How to use catalog ....................................................................................................................................... iii

STRAIGHT EJECTOR PINS ................................................................................................................... 1

STEPPED EJECTOR PINS ........................................................................................................................ 9

RECTANGULAR EJECTOR PINS ......................................................................................................... 13

STRAIGHT EJECTOR SLEEVES ......................................................................................................... 15

CORE PIN BLANKS ............................................................................................................................. 23

ANGULAR PINS .................................................................................................................................. 25

BALL PLUNGERS/BALL BUTTONS/BALL PLUNGER WRENCHES .................................................. 31

BALL PLUNGERS(CAP TYPE).............................................................................................................. 32

SLIDE LOCKS ....................................................................................................................................... 33

BALL PLUNGERS(PLAIN TYPE, HEAD TYPE) ................................................................................ 34

GUIDE FOR OIL-FREE SLIDE UNITS FOR LOOSE CORE ................................................................. 35

OIL-FREE SLIDE UNITS FOR LOOSE CORE ..................................................................................... 37

INCLINED PINS · DIRECT PUSH-UP PINS .......................................................................................... 39

INCLINED PIN LEADER OIL-FREE BUSHINGS- ................................................................................ 45

OIL-FREE SLIDE BLOCKS FOR BLOCK LOOSE CORE ................................................................. 46

SPRUE BUSHINGS ............................................................................................................................. 47

LOCATING RINGS ............................................................................................................................. 51

RUNNER LOCK PINS ........................................................................................................................ 53

RUNNER CHANGE PINS ................................................................................................................... 57

PIN-POINT GATE BUSHINGS .............................................................................................................. 59

PIN-POINT GATE BUSHINGS WITH HEAD.......................................................................................... 63

UNDERSIZED TAPPING ELECTRODES .......................................................................................... 65

ELECTRODES FOR ENGRAVING .................................................................................................... 66

PRECISION LEADER PINS................................................................................................................... 67

PRECISION LEADER BUSHINGS .................................................................................................... 69

LEADERS BUSHINGS ........................................................................................................................ 71

TAPERED PIN SETS ............................................................................................................................. 75

POSITIONING STRAIGHT PIN SETS ............................................................................................... 80

TAPERED BLOCK SETS ................................................................................................................... 83

PRECISION EJECTOR LEADER PINS ............................................................................................... 85

EJECTOR LEADER BUSHINGS ......................................................................................................... 87

BALL RETAINERS ............................................................................................................................. 90

EJECTOR LEADER BUSHINGS(LINEAR GUIDE TYPE · SHORT TYPE) ........................................ 91

EJECTOR RODS WITH SPRING WASHER ..................................................................................... 92

EJECTOR PLATE RETURN DETECTION SWITCHES ...................................................................... 93

STOP BOLTS ....................................................................................................................................... 95

PULLER BOLTS .................................................................................................................................. 97

PRECISION SHOULDER BOLTS/URETHANE WASHERS ................................................................. 99

21

¡ EPH EPHE-B ¡ Printed in Blue

syaD3

Printed in Red

¡ EPH EPHE-B ¡ Pr

Printed SGP StockSGP Stock

H

T=4

x1

L+5+0.1

0-

0.3

0-0.02

R¯0.5(P¯2 R¯0.3)

EPH

P0

-0.005 P -0.02-0.01

EPHE-B

-0

4mm(T4)

Catalog No.

0.005

-0.02-0.01

TC3.0150EPH 2.5

(KCCWKCEetc)

NHC

HCC

HC

Catalog No. L

217

H -0

.02

HCC

0

H -0

.3HC

0

NHN21 3

Catalog No.Type P L60 L100 L150 L200 L250 L300

0.20.30.40.50.6 0.70.8 0.91 1.11.2 1.3 1.41.51.61.7 1.8 1.922.12.2 2.3 2.42.52.62.7 2.8 2.933.13.2 3.3 3.43.53.63.7 3.8 3.9

TC

NC

-0.02

4TC

0

4

2

H

+0.10

3

NCW

NCS

5

H

4

2

L350

Catalog No.

Stocks Availability Subjected to Prior Sales.

Type P L100 L150 L200 L250 L300 L350

11.1

L

P

4

3

2

4

5

7

6

8

9

10

11

15

17

14

Catalog No.H T

PL

606060 100

100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100100

150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150150

200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200

250250

250250

250250

250250

250250

250250

250250

250250250250250250250250250250250250250250250250250250250250250

300

300

300

300

300

300

300

300

300

300

300

300

300

300

300

350

350

350

350

350

350

350

350

350

350

350

350

350


SK

C

-0.1SKC0 SKC

RK

C

RKC -0.10 RKC

DKC

DKCDK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

VWC0

-0.02

VWC

VKC -0.020 VKC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

Spec.CodeAlterations

5

150

L

EPH 1.5

Catalog No.

EPHEPHE-B

EPHEPHE-B

EPH

EPHE-B

Type

(P )

(P )-0.0050

-0.02-0.01

EPH

EPHE-B

44.14.24.54.64.7

55.15.55.6

66.16.56.6

77.17.57.6

88.18.5

99.19.510

10.110.511.5

12

4.3

4.8

8.6

9.6

10.611.6

4.4

4.9

11

5

H

4

25

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

--

----

------

--------

-----------

------------

---

-

- ----

- ----

- --

-- - -

-

-

-

- -

--

-

-

-

-

---

--

--

---

- -

--

-

-

-

-

---

--

--

---

-

Selection

— STANDARD —STRAIGHT EJECTOR PINS

Head Thickness

b1(Range of guaranteed shaft diameter precision)


4mm head

EPHCEPHE-B(when P=0.2)is applied with

overall quenching(its head without annealing).

P

Please take the order for head JIS type EPHJ(P )/ EPHJE (P ).0.000-0.005

-0.01-0.02

P dimension with*mark

Express services not available for NHCCNHNDays Express TCA

Days

Four flats cutting

P/2¯SKC<H/2


P/2¯RKC<H/2

Three flats cutting

P/2¯DKC<H/2

Varied width parallel flats cuttingP/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2

Two flats cutting

P/2¯WKC<H/2

Single flat cutting

P/2¯KC<H/2

Precision two flats cutting

P/2¯VWC<H/2

Precision single flat cutting

P/2¯VKC<H/2

Three flats cutting

at 120BP/2¯KTC<H/2


P/2¯KGC<H/2AG=1Bincrements0<AG<360

About Designation Unit for Key Flat Cutting

(2)To designate arbitrary key flat dimensions


(1)To align the key flat with the shaft diameter

Unit of designation



P+1¯HCC<H-0.3, P˘1.5

HC=0.1mm increments

P+1¯HC<H, P˘1.5

TC=0.1mm increments

2.0¯TC<4, P˘1.5

Dimension L becomes shorter by(4-TC)

Dowel hole boring

Combination with other than NHCCNHN not available.Available when H˘4




Available when H˘2





Available when H˘2

U/Price for 1~49

U/Price for 1~49

DeliveryOrder

Alterations

Express

Express AT

IQuantity discount rateQuantity

Rate - 5%50~1001~49

Standard type

Dowel hole boring+Dowel pin driving


Quo

tation

Quo

tation

Quotation Quotation



When*is indicated for P dimension, production time is 3 business days.

1.3

*11.1

1.4

0.20.30.40.60.8

11.51.61.7

22.12.22.52.62.7

33.13.23.53.63.7

44.1

*4.24.54.6

*4.75

5.15.55.6

6 6.1 6.5 6.6

7 7.1

*7.58

8.1*8.5

9*9.1

1010.1

*10.5*11.5

12

0.50.70.91.1

1.8

2.3

2.8

3.3

3.8

*4.3

*4.8

*7.6

*8.6

*9.5

*10.6*11.6

1.2

1.9

2.4

2.9

3.4

3.9

*4.4

*4.9

*9.6

*11

Range of guaranteed shaft diameter precision

T4 x1 max.30


SKH51

58~60HRC

001-002.ai 5/28/2011 1:54:53 PM

H

T

x1

L+5+0.1

0-

0.3

0-0.02

R¯0.5

EPHJ

P0

-0.005 P -0.02-0.01

EPHJE

-0

6C8mm(JIS)

Catalog No.

0.005

-0.02-0.01

TC3.0200EPHJ4

(KCCWKCEetc)

NHC

HCC

HC

Catalog No. L

217

H -0

.02

HCC

0

H -0

.3HC

0

NHN21 3

TC

NC

-0.02

T

TC 0

T

d

H

+0.10

NCW

NCS

H

T

d

MCMx1

MC

Catalog No.

Type P L100 L150 L200 L250 L300 L350

4

4.5

5

5.5

6

6.5

7

8

9

10

12 -

L

P

6

8

11

10

9

8

13

14

15

17

Catalog No.

TypeH T

P

4

4.5

5

5.5

6

6.5

7

8

9

10

12

100

100

100

100

100

100

100

100

100

100

150

150

150

150

150

150

150

150

150

150

150

200

200

200

200

200

200

200

200

200

200

200

250

250

250

250

250

250

250

250

250

250

250

300

300

300

300

300

300

300

300

300

300

300

350

350

350

350

350

350

350

350

350


5 P.i

200

L

EPHJ4

Catalog No.

EPHJEPHJE

EPHJ

EPHJE

(P )

(P )

-0.0050

-0.02-0.01

EPHJ

EPHJE


SK

C

-0.1SKC0 SKC

RK

C

RKC -0.10 RKC

DKC

DKCDK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

VWC0

-0.02

VWC

VKC -0.020 VKC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

P.i5

H

T

d

-

-

— STANDARD —STRAIGHT EJECTOR PINS


JIS head

Head Thickness


P

LSelection

For JIS head type less than P4 is T=4, please place the order for 4mm head type of EPH(P )/ EPHE-B(P ). -0.01-0.02

0.000-0.005

Standard type

The volume discount rate is also applicable to alteration cost.

Days

Delivery

Order

Alterations

Days

Express services not available for NHCCNHNCMCExpress TCA

Express

Express AT


Two flats cutting

P/2¯WKC<H/2

Single flat cutting

P/2¯KC<H/2


P/2¯VKC<H/2


P/2¯VWC<H/2

Four flats cutting

P/2¯SKC<H/2


P/2¯RKC<H/2

Three flats cutting

P/2¯DKC<H/2

Three flats cutting

at 120BP/2¯KTC<H/2


P/2¯KGC<H/2AG=1Bincrements0<AG<360



Unit of designation



0.1mmUnit of designation


P+1¯HCC<H-0.3

HC=0.1mm increments

P+1¯HC<H

TC=0.1mm increments

T/2¯TC<T

Dimension L becomes shorter by(T-TC).

Dowel hole boringCombination with otherthan NHCCNHN not available.


Combination with otherthan NHCCNHN not available.

Combination with otherthan NHCCNHN not available.


68

T

3 5

d r

68

T

3

d

5

r1

68

T

3

d

5

r2



Head tapping

Combination with any other alteration not available.

Available when P˘8



108C9

PM4M5

12 M6

M


Rate - 5%50~1001~49

U/Price for 1~49

rr

1r

2

43

All price & lead time are to be quoted.

Quo

tation

Quo

tation

Quotation





SKH51

58~60HRC

JIS x1 max.35

003-004.ai 5/28/2011 1:55:02 PM

EPH-LEPY-L

P0

-0.005 P -0.02-0.01

EPHE-L

4mm(T4)

Catalog No.

0-0.005

-0.02-0.01

H

T=4

x1

0-

0.3

0-0.02

R¯0.5(P¯2 R¯0.3)

L (L>200 L )+0.020

+0.050

G1.0

L

P

TC3210.00EPH-L5

(KCCWKCEetc)Catalog No. L 5 P.i

P.i

210.00

L

EPH-L5

Catalog No. 5

HCC

TC

NC

NHC

TMC

GVC

-0

.02

0HC

C

H

-0.02

4TC

0

4

2

H

+0.10

3

217

S

B

t

NCW

NCS

5

H

4

2

NHN21 3

L 0.2GL


Catalog No.Type

H T

2 4

P0.30.40.50.60.70.80.91

20.00~60.00

Catalog No.

TypeH T

P

0.30.40.5

0.6 0.70.8 0.9

1 1.1 1.2 1.3 1.4

1.51.6

1.7 1.8 1.92

2.12.2 2.3 2.4

2.52.6

2.7 2.8 2.93

3.13.2 3.3 3.4

3.53.6

3.7 3.8 3.94

4.14.2 4.3 4.4

4.54.6

4.7 4.8 4.95

5.15.55.66

6.16.56.67

7.17.57.68

8.18.5 8.6

99.1

9.5 9.610

10.110.5 10.611 11.1

11.5 11.612

L

L40.00~100.00

L100.01~150.00

L150.01~200.00

L200.01~250.00

L250.01~300.00

L300.01~350.00

3

4

4

5

7

6

8

9

10

11

15

17

14

60.00

100.00

150.00

200.00

250.00

200.00300.00250.00200.00300.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00200.00350.00250.00350.00250.00350.00250.00350.00250.00350.00

250.00

350.00

250.00

350.00

250.00

350.00

250.00

350.00

40.00

Lmin. Lmax.

L

EPY-LEPH-L

EPHE-L

EPY-L

(P )-0.005 0

(P )-0.02-0.01

EPH-L

EPHE-L


VWCVWC

VKC -0.020

-0.020

VKC

SK

C

-0.1SKC0 SKC

RK

C

RKC-0.10 RKC

DKC

DKCDK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC-0.10 KC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

0HC

H -0

.3

HC

H

4

25

---

-----

-------

----------

----------------

-

---

---

---

--

---

--

---

--

---

--

- -

- -

- -

- -

---

---

--

--

--

--

----

----

— L DIMENSION DESIGNATION TYPE —STRAIGHT EJECTOR PINS


EPY-L is applied with overall quenching(its

head without annealing)

Head Thickness

Express services not available for NHCCNHNCTMCDays Express TCA

P

Four flats cutting

P/2¯SKC<H/2


P/2¯RKC<H/2

Three flats cutting

P/2¯DKC<H/2


Two flats cutting

P/2¯WKC<H/2

Single flat cutting

P/2¯KC<H/2


P/2¯VWC<H/2


P/2¯VKC<H/2

Three flats cutting

at 120BP/2¯KTC<H/2

Two flats(angled)cuttingP/2¯KGC<H/2AG=1Bincrements0<AG<360

HC=0.1mm increments

P+1¯HC<H, P˘1.5


P+1¯HCC<H-0.3, P˘1.5

(Dimension L remains unchanged.)2.0¯TC<4, P˘1.5

TC=0.1mm increments



Lapping on the tip face

Available when P˘0.6

EPY-L not available.

S,B=1mm increments

2¯S¯10, S+5¯B¯30

Available when P˘3

Dowel hole boring

Available when H˘4

4-TC¯Lmax.-L

Available when H˘2


Combination with SKC not available.Available when H˘2

Combination with other than NHCCNHNCTMCCGVC not available.


Available when H˘4



Available when H˘4


Please take the order for JIS head type EPHJ-L(P )/ EPHJE-L(P ).0.000-0.005

-0.01-0.02

When the ejector pin's dimension L is less than 40mm, the length of b1(guaranteed shaft diameter precision range)may be too short for your particular application. For such application, use EPY-L or core pins instead.

L dimension designation type

0.01mm increments U/Price for 1~4

U/Price1~40.01mm increments


4mm head

DeliveryOrder

Alterations





Unit of designation


DaysExpress

Express AT


Rate - 5% 10%13~495~121~4

20%50~100

65





EPY-L x1 max.10

T4 x1 max.30


SKH51

58~60HRC

005-006.ai 5/28/2011 1:55:12 PM

NCEPN 16 500

NC

NHC

HC

TC

217

H

T

+0.10d

r

H

HC0

T

TC

NCW

NCS

r1

H

T

d

NHN21 3

(KCCWKCEetc)LCatalog No.

5 P.i


SK

C

SKC0 SKC

RK

C

RKC0 RKC

DKC

DKCDK

C

DKC0

KAC KBC0

KBCKAC

WKC0

WKC

KC0 KC

KTCKTC

0

KGCKGC

0

KGC


-0.1

-0.1

-0.1

-0.1

-0.1

-0.1

Ú0.5AGB

120B

120B

-0.1

120B

0B -0.1

-0

.3

PT

Catalog No.

EPN

EPJ L˘6006C8mm(JIS)

4mm(T4)L¯500

L P

-0.01-0.02-0.01-0.03

-0.01-0.03-0.01-0.03

-0.01-0.04-0.01-0.05

1~13 15~20 250

-0.02

0-0.05

X1

H0

-0

.3

L+5+0.1

R¯0.5(P¯2 R¯0.3)

1.3

1.9

2.4

2.9

3.4

3.9

(4.4)

(4.9)

(5.4)

(5.9)

(6.4)

1.2

1.8

2.3

2.8

3.3

3.8

(4.3)

(4.8)

(5.3)

(5.8)

(6.3)

11.51.62

2.12.52.63

3.13.53.64

(4.1)4.5

(4.6)5

(5.1)5.5

(5.6)6

(6.1)6.578

1012

(13)15162025

1.1

1.7

2.2

2.7

3.2

3.7

(4.2)

(4.7)

(5.2)

(5.7)

(6.2)

3

4

5

7

4

6

8

9

10

11

15

17

20

21 2125

20

1517

8

9

10

11

13

8

6

30

EPN

EPJ

18 18

Catalog No.

H T H T P

100100100100100100100100100100100100

100

100

100

100

100100100100100100100100

* *

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

*

1.4 150150150150150150150150150150150150

150

150

150

150

150150150150150150150150150

200200200200200200200200200200200200200200200200200200200200200200200200200200200200200200

250250250250250250250250250

250

250

250

250

250250250250250250250250250

300300300300300300300300300300300300300300300300300300300300300300300300300300300300

350

350

350350350350350

350

350

350

350

350350350350350350350350

400

400

400400400400400400400400400400400400400400400400400400400400400400400400

450

450

(450)(450)(450)

(450)

500

500

(500)

(500)

500

500

500

500500500500500500500500500500

(600)

(600)

(600)(600)(600)(600)(600)

(600)(600)

600600

(700)

(700)(700)(700)(700)(700)

(700)(700)

700700

(800)(800)(800)(800)

(800)(800)

800800

(900)(900)(900)(900)

(900)(900)(900)

900900

(1000)(1000)(1000)(1000)

(1000)(1000)(1000)

10001000

EPN 3 100

Catalog No. L

- - -

- - -

5 P.i

Type

***

*

L

P

PCatalog No.

Type L100 L150 L200 L250 L300 L350 L400 L450 L500 L600 L700 L800 L900 L1000

EPN

EPN

EPJ

EPJ

11.21.51.62

2.12.52.63

3.13.53.64

4.14.54.65

5.15.55.66

6.16.578

10121315162025

1.11.3

1.7

2.2

2.7

3.2

3.7

4.2

4.7

5.2

5.7

6.2

1.4

1.8

2.3

2.8

3.3

3.8

4.3

4.8

5.3

5.8

6.3

1.9

2.4

2.9

3.4

3.9

4.4

4.9

5.4

5.9

6.4

- - - - - --

--

----

-

-

-

-

-

-

----

----

---------------- --- -

-

-----------------------

-

-----------------------

-

-----------------------

- L600~1000L100~500

r2

H

T

d

-

-

-

-

-

-

----

--

-

-

-

-

-

-

- -

-

--------

-

-------------

-

---

--------

-

-

-

-

-

-

-

--------------------

-

-

-STANDARD-STRAIGHT EJECTOR PINS

Dies SteelSKD61+

Nitrided


PHead Thickness T

4mm head JIS head

4mm head JIS head

LSelection

The P dimension enclosed in brackets( )is applicable only for EPN.The L dimension enclosed in brackets( )is applicable only for EPJ. If the P dimension of EPN or the L dimension of EPJ bears the *mark,it means that the product concerned will be dispatched on the third day.

Order

Delivery Days

EPN(P dimension with*mark) EPJ(L dimension with*mark)Express TExpress A

Standard type

Alterations

Days Express T Express AExpress services not available for NHCCNHN





Unit of designation


Two flats cutting

P/2¯WKC<H/2

Single flat cutting

P/2¯KC<H/2


P/2¯RKC<H/2

Varied width parallel flats cutting

P/2¯KAC<H/2

KBC=0.1mm increments only

KAC<KBC<H/2

Four flats cutting

P/2¯SKC<H/2

Three flats cutting

P/2¯DKC<H/2

Three flats cutting

at 120BP/2¯KTC<H/2


P/2¯KGC<H/2

AG=1Bincrements

0<AG<360

HC=0.1mm increments

P+1¯HC<H, P˘1.5

TC=0.1mm increments

T/2¯TC<T, P˘1.5

Dimension L becomes shorter (T-TC).

4 2 368

3 5

T d

68

4T

3

2d

5

r

r1

Dowel hole boringAvailable when H˘4Combination with other thanNHCCNHN not available.

Combination with other thanNHCCNHN not available.

Available when H˘4


68

4T

3

2d

5

r2

Combination with other thanNHCCNHN not available.

Available when H˘4


Numbering on the head Combination with SKC not available.

Numbering on the headCombination with SKC not available.


Rate - 5%50~1001~49

U/Price for 1~49

87For area out of Singapore please refer to P.i.

Days3



For area out of Singapore please refer to P.i .


T4 x1 max.30

JIS x1 max.35

Range of guaranteed base material hardness Range of guaranteed surface hardness for nitriding

SKD61+Nitrided

Surface:900HV~Base Materials:40~45HRC

¡ Printed in Red

SGP StockSGP StockPrinted in Red

007-008.ai 5/28/2011 1:55:21 PM

4mm(T4)

6mm(JIS)

4mm(T4)

6mm(JIS)

EHS-0.005

Catalog No.

0

EHSJ

EHSE

EHSJE-0.01-0.02

0-0.005N

D

P

R¯0.5

H

P-0.02-0.01

-0

.3

0

T 0-0.02

0-5

L+5+0.1

-0

.02

0 EHSJ EHSJEEHS EHSE

(D¯2 R¯0.3)

(L-N)

H

217

T

-0

.02

T

H

0-0.02

d

TC

0

HCC

0

21 3

H

T

d

H -0

.3HC

0

T d R4 2 36 3 5

T d R1

4 25

6 3

3

EHS

EHSE

EHSJ

EHSJE

NL

P

SK

C

-0.1SKC0

RK

C

RKC -0.10

DKC

DK

C

DKC0

-0.1

KAC -0.1KBC0

WKC0

-0.1

KC -0.10

120B

120B-0.1

120B

KTC0

Ú0.5

0BKGC

AGB 0

-0.1

KGC

3

4

6

4

5

6

8

9

EHSJ

EHSJE

(P )EHS-0.005

0

(P )

EHSE-0.01-0.02

(P )-0.0050

(P )-0.01-0.02

+0.1

Catalog No.LType D

P NH T

1.5

1

2

2.5

3

4

4.5

5

60100

60

100150100150200150200150200150200250150200250150200250

20

20

35

35

100

100

100

100100

100100

100100

125

125

125

80

80

80

90

90

90

90

60

60

6070

7070707070707070

7070

7070

40

40

4040

50

50505050

50

50

50

50

50

(0.4)(0.4)

(0.5)(0.5)(0.5)

0.6 0.8

0.8

0.8

1.0

1.0

1.0

1.0

0.90.9

0.9

0.9

0.6 0.80.70.7

0.7

1.01.21.2

1.2

1.2

1.2

1.3

1.3

1.3

1.1

1.1

1.1

1.5

1.5

1.5

1.6

1.6

1.6

1.7

1.7

1.4

1.4

1.4

1.8

1.8

1.8

2.0

2.0

2.0

2.0

2.1

2.1 2.2

1.9

1.9 2.5

2.5

2.5

2.42.3 2.6

3.0

3.0

(0.3)(0.3)

(0.4)(0.5)0.6 0.80.7(0.3)

150EHS 2

Catalog No. L

1.0

P

70

N

200EHSE 2.5 P1.5 N70

EHS

EHSEEHSJEHSJE

P.i5

Catalog No.

EHS 2 150

L

1.0

P

70

N (KCCWKCEetc)

RKC1

NC

NHC

Code

TC

HCC

Alterations Spec.

NHN

NCW

HC

Type DP L

1

1.5

2.5

2

3

Catalog No.

0.30.40.5

0.7~1.8

0.8~2.1

1.0~2.6

0.30.40.5

0.6~0.8

0.6~1.2

60100

60100150100150100150200150200150200

Type DP L

4

5

4.5

Catalog No.

2.0~3.0

2.0 2.5

3.0

150200250150200250150200250


SKC

RKC

DKC

KBCKAC

WKC

KC

KTC

KGC

5

VWC0

-0.02

VKC -0.020

VWC

VKC


-STANDARD TYPE-STEPPED EJECTOR PINS

Step radius(R)

PHead Thickness


58~60HRC

SKH51

The figures in( )for P dimensions are applicable for EHS only.

Note that alphabetical characters(P.N)are

not necessary in ordering EHS.

Express

Express AT

Days

Days3

Standard type

Delivery

Order

Alterations

Days Express services not available for NHCCNHNExpress TCA

Single flat cutting




Single flat cutting

D/2¯KC<H/2

Two flats cutting

D/2¯WKC<H/2


D/2¯RKC<H/2

Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments only

KAC<KBC<H/2

Four flats cutting

D/2¯SKC<H/2

Three flats cutting

D/2¯DKC<H/2



Three flats cutting

at 120B

D/2¯KTC<H/2

(1)To align the key

flat with the shaft

diameter

Unit of designation


(2)To designate

arbitrary key

flat dimensions



-Quantity

Rate1~49 50~100

5%

U/Price U/Price1~49 1~49


TC=0.1mm increments T/2¯TC<T,D˘1.5

Dimensions L and N become shorter by(T-TC).

HC=0.1mm increments

D+1¯HC<H,D˘1.5


D+1¯HCC<H-0.3,D˘1.5

Dowel hole boring

Available when H˘4




Available when H˘4







rr

1

109




009-010.ai 5/28/2011 1:55:33 PM

PN

L

N

DR¯0.5

(L>200L

H-

0.3

0

T 0-0.02

0-5

+0.02 0

-0

.02

0(D¯2 R¯0.3)

(L-N)

L ) 0+0.05

G1.0

EHSJL EHSJELEHSL EHSEL

0-0.005P P-0.02

-0.01

4mm(T4)

6mm(JIS)

4mm(T4)

6mm(JIS)

EHSL-0.005

Catalog No.

0

EHSJL

EHSEL

EHSJEL-0.01-0.02

Catalog No.Type D

H T

3

4

6

4

5

6

8

9

(P )

EHSL-0.005

0

(P )

EHSEL-0.01-0.02

(P )

EHSJL-0.005

0

(P )

EHSJEL-0.01-0.02

P N

1.5

1

2

2.5

3

4

4.5

5

100.01~150.00150.01~200.00

50.00~ 60.00 60.01~100.00 50.00~ 60.00

60.01~100.00

50.00~100.00100.01~150.00150.01~200.00100.00~150.00

100.00~150.00150.01~200.00

150.01~200.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00

(0.3)

(0.3)(0.3)

(0.4)

(0.4)(0.4)

(0.5)

(0.5)(0.5)(0.5)

3.0

3.0

2.62.5

2.5

2.5

2.42.32.2

2.1

2.1

2.0

2.0

2.0

2.0

1.9

1.9

1.8

1.8

1.8

1.7

1.7

1.6

1.6

1.6

1.5

1.5

1.5

1.4

1.4

1.4

1.3

1.3

1.3

1.21.21.2

1.2

1.2

1.2

1.1

1.1

1.1

1.01.01.0

1.0

1.0

1.0

0.90.90.9

0.9

0.9

0.8

0.80.80.8

0.8

0.8

0.7

0.70.70.7

0.7

0.6

0.60.60.6

200.01~250.00

20 35 40 50 60

20 35 40 50 60

50 70 90 50 70 80 90 100

40 50 6040 50 70 90

20 35 40 50 60 70 80 90 100 12550 70 90

20 35 40 50 60 70 80 90 100 12550 70 90

20 35 40 50 60 70 80 90 100 12550 70

70 100100 125

50 70 70 100

100 12550 70

70 100100 125

Catalog No.

EHSJL 4

L

240.30 P2.5

P N

N100

5 P.i

L

H

L 0.2GL

217

T

-0

.02

T

H

0-0.02

+0.1d

TC

0

HCC

0

21 3

H

T

d

t

B

S

Catalog No.

EHSL 2 150.00

L

P1.5

P

N70

N (KCCWKCEetc)

KTC1.5

NC

NHC

TMC

Code

TC

HCC

Alterations

NHN

NCW

GVC

Spec.

H -0

.3HC

0

HC

SK

C

-0.1SKC0

RK

C

RKC -0.10

DKC

DK

C

DKC0

-0.1

KAC -0.1KBC0

WKC0

-0.1

KC -0.10

120B

120B-0.1

120B

KTC0

Ú0.5

0BKGC

AGB 0

-0.1

KGC


SKC

RKC

DKC

KBCKAC

WKC

KC

KTC

KGC

VWC0

-0.02

VKC -0.020

VWC

VKC

EHSL

EHSEL

EHSJL

EHSJEL

60.01~100.0050.00~150.00

50.00~100.00

50.00~100.00

100.01~150.00150.01~200.00

50.00~100.00100.01~150.00150.01~200.00100.00~150.00150.01~200.00100.00~150.00150.01~200.00

P L

0.30.6~0.8

0.50.40.3

0.40.5

0.6~1.2

0.7~1.8

0.8~2.1

1.0~2.6

1.5

1

2

2.5

3

DCatalog No.

Type

100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00100.00~150.00150.01~200.00200.01~250.00

P L

2.0~3.0

2.0 2.5

3.0

4

4.5

5

DCatalog No.

Type


-L DIMENSION DESIGNATION TYPE-STEPPED EJECTOR PINS

Step radius(R)

PHead Thickness



Step R

58~60HRC

SKH51

0.01mm increments

The figures in( )for P dimensions are applicable for EHSL only. L-N˘10

Order

DeliveryDays

Express

Express AT

Express services not available for NHCCNHNCTMC

Alterations

L dimension designation type

Single flat cutting




Single flat cutting

D/2¯KC<H/2

Two flats cutting

D/2¯WKC<H/2


D/2¯KAC<H/2KBC=0.1mm increments only

KAC<KBC<H/2

Four flats cutting

D/2¯SKC<H/2


D/2¯RKC<H/2

Three flats cutting

D/2¯DKC<H/2

Three flats cutting

at 120BD/2¯KTC<H/2




(1)To align the key

flat with the shaft

diameter

Unit of designation


(2)To designate

arbitrary key

flat dimensions


rr

1

D+1¯HC<H, D˘1.5

HC=0.1mm increments


D+1¯HCC<H-0.3,D˘1.5

TC=0.1mm increments

T/2¯TC<T,D˘1.5

T-TC L̄max.-L Dimension L remains unchanged.

Dimension N becomes shorter by(T-TC).Dowel hole boring

Available when H˘4

Combination with other than

NHC/NHN/TMC/GVC not available.


Available when H˘4

Combination with other than

NHC/NHN/TMC/GVC not available.


Combination with SKC not available


Combination with SKC not available

S,B=1mm increments

Available for P=3.0

2¯S¯10,S+5¯B¯30

Lapping on the tip face

Available when P˘0.6

T d r4 2 36 3 5

T d r1

4 25

6 3


Rate - 5%

5~12

10%

13~49

20%

50~1001~4

U/Price1~4

U/Price1~4

1211



011-012.ai 5/28/2011 1:55:42 PM


4mm(T4)

6C8mm(JIS) -0.01

0

T-0.020

R¯0.3)(D¯2

N-50

(L-N)

H-

0.3

0

D-

0.0

20

R¯0.5

P-0.010

W-

0.0

10

L+5+0.1

Catalog No.

ERPH

ERJ

T

0-0.02TC

5 2 3

5

P

90

0B

180

270B B

B

D/2

P90

0B 180

270B

B

BD/2

Catalog No.

ERPH

DType1.52

2.53

3.54

4.55

5.56

6.578

8.510

10.5-

-

L100C120C150 L175C200 L250

21 3

Catalog No.

ERJ

DType4

4.55

5.56

6.578

8.510

10.512

L100C120C150 L175C200 L250 L300

-0.10

KSA

W

-0.10

WSA

W

Mx1

MC

ERPH

H TCatalog No.

DL P W N

40

4040

4040

4040

4040

404040

404040

404040

404040

4040

40

4040

4040

40

40

40

40

30

30

50505050

5050

5050

5050

505050

505050

505050

505050

5050

50

5050

5050

50

5050

50

6060606060606060606060606060

60606060

60606060

6060606060

6060606060

60606060

60

60606060

60606060

606060

60

1.01.21.5

0.7

0.7

0.7

0.7

0.7

0.7

0.7

3.0

1.5(2.0)

2.0(2.5)

2.5(3.0)

3.0(3.5)

3.5(4.0)

4.0

4.5(5.0)

5.0

6.0

6.0

8.0

0.81.01.2

0.4

0.4

0.4

0.4

0.4

0.40.3

0.5

0.5

0.5

0.5

0.5

0.51.5

4

3

5

6

-

7

8

49

10

11

14

17

- - -

-

8

9

10

11

13

17

14

1515

6.0

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.8

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

0.9

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.0

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.2

1.5

(1.5)

(1.5)

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.5

1.8

1.8

1.8

1.8

1.8

1.8

1.8

1.8

1.8

1.8

1.8

(2.0)

(2.0)

(2.0)

(2.0)

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

2.0

(2.5)

2.5

(2.5)

2.5

2.5

2.5

2.5

2.5

2.57.0

10.0

10.0

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

8.5

10

10.5

12

70

7070

7070

7070

7070

707070

70707070

7070707070

7070707070

70707070

70

7070

7070

70

80

8080

8080

8080

808080

808080

80

808080

80

808080

80

80

80

80

80

80

80

90

90

90

9090

90

9090

100

100

100100

100100

100100

100100

100100

100100

100

100100

100100

100100

100100100

100100

100100100

130

130

120

120

120

120

120

120

120

120

120

120

160

160

160

180

180

180

180

200

H

-

6

8

T

150

150

150

150

150

150

100150100150200100150200100150200100150200250100

(120)150200250100120150200250100

(120)150

(175)200250100120150175200250

(120)150

(175)200250150200250120150175200250

(300)(120)

150(175)

200250

(300)150200250

(300)(120)(150)(175)

200250

(300)150200250

(300)150200250300

0.6

0.6

0.6

0.6

0.6

0.6

0.6

0.6

Price PriceSpec.CodeAlterations Spec.CodeAlterations

ERJ

-

-0

.30

H

HC

H

HCC

0-

0.0

2

B

P

90

0B

180

270B

B

0B

D/2

0

-0.

02

B

P

0B

90B270

B180

0B

D/2

0

-0.

02

5

120ERJ 8

LCatalog No. P

P6.0 N60

NW

W1.0

(AKCCAWCEetc)

AKC 0

ARC

ADC

KGA

KGD

VAK

VAW

NHC

NHN

TC

KSA

WSA

MC

HC

HCC

0B

D/2

0

-0.1 P

90

0B

180

270B B

B

P

0B

B90B270

B180

0B

D/2

0

-0.1

D/2

0B

D/2

0B 0B

P

270B 90B

180B

0B

P

270B 90B

180B

120ERJ8 P6.0

P

W1.0

W

N60

NLCatalog No.

5 P.i w

Pmin.

Pmax.

Rmax.

AKC

AWC

-IQuantity discount rate

A

A

Days Express

Order

Alterations

Delivery

Express services not available for KSACWSACNHCCNHNCMCExpressDays

(JIS head)

RECTANGULAR EJECTOR PINSPCW 0-0.01

Standard

Head Thickness PCW

Step radius(R)


Step R

Range of guaranteed base material hardnessSKH51 58~60HRC

ARC=1Bincrements

0¯ARC<360

When combined with KSA/WSA, 90Bincrements only.

ADC=1Bincrements

0¯ADC<360


KGA=1Bincrements

0<KGA<360

KGD=1Bincrements

0<KGD<360

D+1¯HCC<H-0.3


HC=0.1mm increments

D+1¯HC<H

W/2+0.1¯WSA¯D/2-0.1

WSA=0.1mm increments

KSA=0.1mm increments

W/2+0.1¯KSA¯D/2-0.1

TC=0.1mm incrementsT/2¯TC<TDimensions L and N become shorter by(T-TC).

Tapping

D8C8.5 M4D10C10.5 M5D12 M6 Available when D˘8

Not available for ERPH.



4mm head JIS head4mm head JIS head

(4mm head)

L(120)(150)(175)(300) are available only for ERJ.

U/Price for 1~49 U/Price for 1~49

-Quantity Rate

1~4950~100 5%

Selections in which both the P and W dimensions are enclosed in brackets( )cannot be made.

Precision Standard

Squareness of the tip corner

W plane as the base

Rmax.¯0.03(Trimming R)Corner R value of the tip corner

(Pmax.-Pmin.)̄ 0.02

The tip corners have been slightly

trimmed to measure the PCW

dimensions.

0¯VAK<360VAK=45Bincrements

KSA,WSA not available

0¯VAW<360VAW=45Bincrements

KSA,WSA not available

0¯AKC<360

AKC=1Bincrements

AWC=1Bincrements


0¯AWC<360


-STANDARD TYPE-

1413



013-014.ai 5/28/2011 1:55:51 PM

b1(Range of guaranteed shaft diameter precision)x1 max.=30


Range of guaranteed surface hardness for nitriding

Note that the Stepped Center Pin’s shaft diameter(D)is too large to fit in the recess(C)of ESNV.

H

0-

0.3

CÚ

0.1

R¯0.5

T=4 0-0.02 -0.02

-0.01

(L-S) S-5 0

L+5+0.1

F0.03 D

x1

V¯3.0 3.5¯V¯6.0 V˘6.5

+0.0100

+0.0120

+0.0150

V H7

Catalog No.

ESNV H7

L

S

10075 125 150 175 200 250 275225 300

50(V1.5 40)40 60(V1.5 40) 8060 90

-0.01-0.02

(KCCWKCEetc.)Catalog No. L V

ESNV8 100 4.0 KC4.5

5

ESNV8

Catalog No.

100

L

4.0

V

Code

HC

Alterations

H -0

.3HC

0

Spec. PricePrice

TC4

0-0.02TC


RK

C

RKC -0.10 RKC

DKCDKC

DK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

Catalog No.

Type D

Catalog No.L

75 100 125 150 175 200 225 250 275 300Type D

V1.5

V2.0C2.5

V1.5

V2.0C2.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

H

7

8

9

10

11

14

15

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

1.5

2.0 2.5

1.5

2.0 2.5

2.0 2.5 3.0

2.0 2.5 3.0 3.5

2.5 3.0 3.5 4.0

2.5 3.0 3.5 4.0

2.5 3.0 3.5 4.0 4.5 5.0

3.0 3.5 4.0 4.5 5.0

4.0 4.5 5.0 5.5 6.0

6.0 6.5 7.0

6.0 7.0 8.0

LV

ESNV

ESNV

C=V+0.5

-

-

-

-

-

-

- -

SKC

SK

C

SKC -0.10

75

75

75

75

75

75

75

75

75

75

75

100

100

100

100

100

100

100

100

100

100

100

100

100

125

125

125

125

125

125

125

125

125

125

125

125

125

150

150

150

150

150

150

150

150

150

150

150

150

150

175

175

175

175

175

175

175

175

175

175

175

200

200

200

200

200

200

200

200

200

200

200

225

225

225

225

225

225

225

250

250

250

250

250

250

250

275

257

300

300

- -

SKD61+NitridedConcentricitym0.034mm head

STRAIGHT EJECTOR SLEEVES

Selection

Days

Order

Delivery


Rate 5%5~50

-1~4

U/Price for 1~4

— STANDARD TYPE —

GNote that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance is not recommended. The reason for this is the fitting sections S are longer.

V Applicable center pin shaft diamater tolerance

0.000-0.005

VH7


SKD61+Nitrided

Surface:900HV~Base material:40Ú3HRC

Alterations

Varied width parallel flats cuttingD/2¯KAC<H/2KBC=0.1mm increments onlyKAC<KBC<H/2

Two flats cutting

D/2¯WKC<H/2

Single flat cutting

D/2¯KC<H/2

Three flats cutting

at 120BD/2¯KTC<H/2




D/2¯RKC<H/2

Three flats cuttingD/2¯DKC<H/2

Four flats cuttingD/2¯SKC<H/2

0-0.1Tolerance

0.1mm

0-0.1

About DesignationUnit and Tolerancefor Key Flat Cutting

(1)To align the key

flat with the shaft

diameter


Unit of designation

0-0.1It remains at even

when D/2 is designated

to fit shaft diameter.

Unit of designation

Tolerance

(2)To designate

arbitrary key

flat dimensions

D¯HC<H

2.0¯TC<4

HC=0.1mm increments

In relation to the head diameter tolerance, alteration may create a straight piece with little diameter difference between the head and shaft.

Dimensions L and(L-S)become shorter by(4-TC).

TC=0.1mm increments

1615



015-016.ai 5/28/2011 1:56:01 PM

b1(Range of guaranteed shaft diameter precision) x1 max.=30






Catalog No.

ESN H7

L

S

10075 125 150 175 200 250 300

50(V1.5 40)40 60(V1.5 40) 8060 90

ESN8

Catalog No.

100

L

4.0

V

F0.06

V H7

-0.02-0.01

DT=4

0-0.02

(L-S) 0-5

L+0.5+0.1

CÚ

0.1

H

0-

0.3

S

C=V+0.5

5


ESN8 200 4.0 KC4.5

R¯0.5

x1

Catalog No.

ESN

L175Type D L75 L100 L125 L150 L200 L250 L300

4

55.56

6.57

7.589

10121316

4.5

V1.5V2.0C2.5

V1.5V2.0C2.5

-

-

-

-

-

-

-

-0.01-0.02

ESN

HCatalog No.

Type DL

10075 125 150 175 200 250 300V

7

8

9

10

11

18

15

17

14

21

4

4.5

5

6

5.5

6.5

7.5

7

8

9

10

12

13

16

1.52.02.51.52.02.52.02.53.02.02.53.03.52.53.03.54.02.53.03.54.02.53.03.54.04.55.03.03.54.04.55.04.04.55.05.56.06.06.57.06.07.08.08.09.08.09.0

10.010.011.012.0

lllllllllllllllllllllllllllllllllllll

lllll

llllllllllllllll

ll

lllll

llllllllllllllll

ll

lllll

llllllllllllllll

ll

lllll

llllllllllllllll

ll

lllll

llllllllllllllll

ll

l

llllllllllllllll

ll

l

lll

l

lll

l

lll

ll

ll

l l l l l l l

l l l l l l ll l l l l l ll l l l l l l

l l l l l l ll l l l l l ll l l l l l l

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

Code

HC

Alterations

H -0

.3HC

0

Spec. Price

TC4

0-0.02TC


RK

C

RKC -0.10 RKC

DKCDKCD

KC

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

V¯3.0

+0.010 0

3.5¯V¯6.0

+0.012 0

6.5¯V¯10.0

+0.015 0

V˘11.0

+0.018 0

5 P.i

SKC

SK

C

SKC -0.10

A

A

VH7

Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C)of ESN.

-STANDARD TYPE-STRAIGHT EJECTOR SLEEVES

Applicable center pin shaft diamater tolerance



SKD61+Nitrided


V

D¯HC<H

2.0¯TC<4


Two flats cutting

D/2¯WKC<H/2

Single flat cutting

D/2¯KC<H/2

Three flats cutting

at 120B

D/2¯KTC<H/2




D/2¯RKC<H/2



Selection

Tolerance

(1)To align the key

flat with the shaft

diameter


Unit of designation




Unit of designation

Tolerance

(2)To designate

arbitrary key

flat dimensions

HC=0.1mm increments


Dimensions L and(L-S) become shorter by(4-TC).

TC=0.1mm increments


0-0.1

SKD61+NitridedConcentricity 0.06

4mm head

for L dimension specifications

lfor L dimension specifications

Days

Days

¡

K

3

Days

Express

Express

Note that when you order ESN, entry of an

alphabetical character(V)is not required.

U/Price for 1~4

Products with the marks are in 3-days, and ones with the l marks will be shipped in 5-days.

QuantityRate - 5%

5~501~4

Order Delivery

Alterations

0-0.1

0.1mm

0-0.005


1817

Price

017-018.ai 5/28/2011 1:56:10 PM

(L>200 L )



Catalog No.

ESN-LC H7

ESN-LC8

Catalog No.

123.65

L

V4.0

V 5 P.i


ESN-LC8 196.25 V4.0 KC4.5

ESN-LC

-

-

-

-

-

-

-

F0.06T=4

CÚ

0.1

H

0-0.02

-0

.3

0

L+0.02 0

x1

R¯0.5

SZ 0-5

+0.05 0

ESN-LC

8

9

10

11

14

15

17

18

21

7 4

5

4.5

5.5

6

6.5

7

7.5

8

9

10

12

13

16

1.52.02.51.52.02.52.02.53.02.02.53.03.52.53.03.54.02.53.03.54.02.53.03.54.04.55.03.03.54.04.55.04.04.55.05.56.06.06.57.06.07.08.08.09.08.09.0

10.010.011.012.0

HCatalog No.

Type DVL

Code

HC

Alterations

H -0.3

HC0

TC4

0-0.02TC

C=V+0.5V0.

1

RGX

CGX

Ú0.05CGX45B

L

L

L

L

RGZ

CGZ

0.1RGZÚ0.1

0.1

V

45B

V

CGZÚ0.05

Ú0.1 V0.1RGX

L

Z

50.00~75.00

35

75.01~100.00

50(V1.5 60)

100.01~125.00

75(V1.5 85)

125.01~150.00

90(V1.5 110)

150.01~175.00

115

175.01~200.00

120

200.01~250.00

170

250.01~300.00

210

V H7

-0.02-0.01

D


RKC

RK

C

RKC -0.10

DKCDKC

DK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

Price Price

-0.01-0.02

Spec.

50.00 ~ 200.00

50.00 ~ 150.00

50.00 ~ 200.00

50.00 ~ 200.00

50.00 ~ 150.00

50.00 ~ 250.00

50.00 ~ 250.00

50.00 ~ 200.00

50.00 ~ 250.00

50.00 ~ 250.00

50.00 ~ 250.00

80.00 ~ 300.00

80.00 ~ 300.00

80.00 ~ 300.00

80.00 ~ 300.00

80.00 ~ 300.00

4

4.5

Type D L50.00~75.00

L100.01~125.00

L125.01~150.00

L150.01~175.00

L175.01~200.00

L200.01~250.00

L250.01~300.00

L75.01~100.00

V1.5V2.0C2.5

V1.5V2.0C2.55

5.56

6.57

7.589

10121316

-

-

V¯3.0

+0.010 0

3.5¯V¯6.0

+0.012 0

6.5¯V¯10.0

+0.015 0

V˘11.0

+0.018 0

SKCSK

C

SKC -0.10

Catalog No.

STRAIGHT EJECTOR SLEEVES-L DIMENSION DESIGNATION TYPE-

SKD61+NitridedConcentricitym0.064mm head

Applicable center pin shaft diamater toleranceV



VH7

0-0.005

b1(Range of guaranteed shaft diameter precision)x1 max.=30

Range of guaranteed base material hardnes


SKD61+Nitrided


Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C).

S dimension depends on the designated L dimension.

S=L-Z

Order

Alterations

DeliveryDays Express A

Express services

not available for CGXCRGXCCGZCRGZ.

For L dimension less than 50mm, please use Short Ejector Sleeves ECB, ECBB.(Only for D4C5C6C7C8C10)

0.01mm increments Selection

Three flats cutting

at 120BD/2¯KTC<H/2


D/2¯KGC<H/2

AG=1Bincrements

0<AG<360


D/2¯KAC<H/2

KBC=0.1mm increments only

KAC<KBC<H/2

Two flats cutting

D/2¯WKC<H/2

Single flat cutting

D/2¯KC<H/2

Two flats(right angled)utting

D/2¯RKC<H/2

Three flats cutting

D/2¯DKC<H/2

Four flats cutting

D/2¯SKC<H/2

0.1mm

0-0.1

0-0.1Tolerance


(1)To align the key

flat with the shaft

diameter


Unit of designation

It remains at even



Unit of designation

Tolerance

(2)To designate

arbitrary key

flat dimensions

D¯HC<HHC=0.1mm increments

2.0¯TC<4, 4-TC¯Lmax.-L

Dimension Z becomes shorter by(4-TC).

TC=0.1mm increments

Dimension L remains unchanged.

CGX=0.1mm increments

Combination with RGX/CGZ/RGZ not available.

0.2¯CGX¯1.5 and CGX¯ -0.1D-V

2

RGX=0.1mm increments

0.3¯RGX¯1.5 and RGX¯ -0.1D-V

2Combination with CGX/CGZ/RGZ not available.

Combination with CGX/RGX/RGZ not available.

Combination with CGX/RGX/CGZ not available.

CGZ=0.1mm increments

0.2¯CGZ¯1.0 and CGZ¯ -0.1D-V

2

RGZ=0.1mm increments

0.5¯RGZ¯1.0 and RGZ¯ -0.1D-V

2



Rate - 5%5~121~4

10%13~19

15%20~50

U/Price for 1~4

2019

0-0.1

019-020.ai 5/28/2011 1:56:19 PM

b1(Range of guaranteed shaft diameter precision) x1 max.=35





Catalog No.

ESJ

200ESJ8

LCatalog No.

4

V

KC4.0

(KCCWKCEetc.)

H7

V¯3 3.5¯V¯6 6.5¯V¯10

D¯12 D˘15

-0.02-0.01 -0.01

-0.03

+0.010 0

+0.012 0 0

+0.015

V˘12

0+0.018

HCatalog No.

Type DV

475 500

100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450

475 500

100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450

475 500

300

325 350 375 400 425 450

100 120 140 160 180 200 225 250 275

475 500

300

325 350 375 400 425 450

100 120 140 160 180 200 225 250 275

325 350

100 120 140 160 180 200 225 250 275 300

325 350 375

375

400 425 450

100 120 140 160 180 200 225 250 275 300

325 350 375 400 425 450

100 120 140 160 180 200 225 250 275 300

250 275 300

100 120 140 160 180 200 225

250 275 300

100 120 140 160 180 200 225

100 120

300275250225200180160140120100

450425400375350325

4

5

5.5

6

6.5

7

7.5

ESJ

8

6

T

8

12

10

8

9

17

15

13

14

12

11

10

9

L

180 200100 120 140

140

140

160

100 120

100 1204.5

180 200140 160

20

25

475 500200 225 250 275 300 325 350 375 400 425 45015

475 500200 225 250 275 300 325 350 375 400 425 45020Code

HC

Alterations

H -0

.3HC

0

Spec. Price

TCT

0-0.05TC

+0.1L+5

S

T

0

H-

0.3

(L-S)

-0.05 0

0-5

F0.06

C=V+0.5

R¯0.5

L

S

100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500

50(V1.5 40) 10075 115 150

H7V

D

CÚ

0.1

-0.01-0.02


RK

C

RKC -0.10 RKC

DKC

DKCDK

C

DKC0

-0.1

KAC -0.1KBC0

KBCKAC

WKC0

-0.1

WKC

KC -0.10 KC

KTC120B

120B-0.1

120B

KTC0

KGC

Ú0.5

0BKGC

AGB 0

-0.1

KGC

x1

1.5

2

1.5

2

2

3

2

3

2

3

2

3

2

3

3

3.5

2

3

5

2

3

5

4

5

4

5

9

12

2.5

2.5

2.5

2.5

2.5

3.5

2.5

3.5

2.5

3.5

3.5

4

2.5

3.5

2.5

3.5

5.5

4.5

5.5

4.5

5.5

10

15

3

3

3

3

4

3

4

4

4.5

3

4

3

4

6

5

6

5

6

3.5

3.5

3.5

4.5

4.5

3.5

4.5

3.5

4.5

5.5

6.5

5.5

6.5

4

4

4

4

5

4

5

6

7

6

7

4.5

4.5

4.5

6.5

6.5

8

5

5

7

7

5.5

5.5

8 8.5

VL 3

LDType

Catalog No.

100 120 140 160 180 200 225 250 275 300 325 350 375 400 425 450 475 500

4

4.5

55.56

6.57

7.589

10121520

ESJ

- - - - -

- -

- - -

-- - - -

- - - -

-

-

-

-

-

- -

V1.5

V2C2.5

V1.5

V2C2.5

SKC

SK

C

SKC -0.10

2.5120ESJ6.5

Catalog No. P.i5 ADays

D

VH7

Note that the Stepped Center Pin's shaft diameter(D)is too large to fit in the recess(C)of ESJ.

-STANDARD TYPE-STRAIGHT EJECTOR SLEEVES

Applicable center pin shaft diamater tolerance



SKD61+Nitrided


V

D¯HC<H

T/2¯TC<T


Two flats cutting

D/2¯WKC<H/2

Single flat cutting

D/2¯KC<H/2

Three flats cutting

at 120B

D/2¯KTC<H/2




D/2¯RKC<H/2



Tolerance

(1)To align the key

flat with the shaft

diameter


Unit of designation




Unit of designation

Tolerance

(2)To designate

arbitrary key

flat dimensions

HC=0.1mm increments


Dimensions L and(L-S) become shorter by(T-TC).

TC=0.1mm increments


Alterations

Order


Rate - 5%5~501~4

Note that when you order ESJ, entry of

an alphabetical character(V)is not required.

Selection

ExpressDelivery

0-0.1

0.1mm

0-0.1

SKD61+NitridedConcentricity 0.06

JIS head

U/Price for 1~4

0-0.005

2221

Price

021-022.ai 5/28/2011 1:56:29 PM

2423

SGP StockSGP StockPrinted in Red

Catalog No.

CPD

CPH

SKD61

SKH51

48~52HRC

58~60HRC

-0.01-0.02

-0.005 0

D

4

H

L+0.1+5

R¯0.3

-0

.3

0

0-0.02

CPD*

(SKH51)

(SKD61)

CPH

5

6

7

8

9

10

11

15

18

21

3

4

HCatalog No.

TypeL

D

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2*

2.5*

3*

3.5*

4*

4.5*

6*

6.5*

7*

8*

10*

13

16

5.5*

5*

60*

100*

60

L

CPD6

Catalog No.

Catalog No.

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

13

16

L60 L100DType

CPD(SKD61)

Catalog No.

1

1.1

1.2

1.3

1.4

1.5

1.6

1.7

1.8

1.9

2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

8

10

13

16

L60 L100DType

CPH(SKH51)

CORE PIN BLANKS

D

U/Price for 1~49 U/Price for 1~49

Delivery

Order

QuantityRate - 5%

50~1001~49


¡ CPD*CPH ¡ Printed in Blue

syaD3

CPD with * are Stock Product.



Quotation Quotation


023-024.ai 6/2/2011 9:40:04 AM

( F50




AP

Alterations Code

TC

Spec. Price Price

A15

AN

N30.0200.0

L

AP25

Catalog No.

5 D4~25

D30~50 P.i5

P.i

TC

AB

min.2

1.6G

SR=D/2

Df6

S

L

N

Dm

5

T -0.2

Ú0.2

ABÚ15V

H-

0.2

S

SR=D/2

0

0

A15N30.0200.0APS25

D

4~ 8

10~50 SUJ2

SKD11 60~63HRC

APS

S

SR=D-1

22D-1

SR=

S

L

N

1.6G

Dm

5

T-0.2

Ú0.2

-0

.2H

ABÚ15V

*C

V)BÚ30 A

( F50 V)BÚ30 A

0

0

(D-

1)

-0.

050

200.0APS 25

LCatalog No. N

N30.0 DC24.5

(TCCCMCDKCCDCCKACCTM)A

A15 DKC KAC

KAC

DKC

Alterations Code

CM

Spec.

DC

TM

DK

C

C

DC

N

D m5 f6(AP) T H

S

7

8

9

+0.009+0.004

-0.010-0.018

5

11

13

15

Catalog No.TypeAP APS D L N

AAPS

+0.012+0.006

-0.013-0.022

16

10

18

AP

APS

13

19

23

28

35

15

37

40

45

4

5

6

8

10

15

13

12

16

20

30

25

40

50

35

32

+0.020+0.009

-0.025-0.041

2

2.5

3

4

5

6

6.5

7.5

8

10

9.5

1.5

2

2.5

3.5

4.5

5.5

6

7

7.5

10

+0.017+0.008

-0.020-0.033

+0.015+0.007

-0.016-0.027

AP

N=0or

N¯L-T-12¯N

0~30

4

5

6

8

10

12

13

15

16

20

25

30

32

35

40

50 5520

15.0~ 70.070.1~ 90.015.0~ 70.070.1~ 90.090.1~100.015.0~ 70.070.1~ 90.090.1~110.015.0~ 80.080.1~110.0

110.1~130.020.0~110.0

110.1~160.0160.1~200.020.0~110.0

110.1~160.0160.1~200.0200.1~250.020.0~110.0

110.1~160.0160.1~200.0200.1~250.020.0~110.0

110.1~160.0160.1~200.0200.1~250.020.0~110.0

110.1~160.0160.1~200.0200.1~250.0

40.0~130.0130.1~200.0200.1~300.0300.1~350.040.0~130.0

130.1~200.0200.1~300.0300.1~350.0350.1~400.060.0~160.0

160.1~220.0220.1~300.0300.1~400.0400.1~500.0

400.1~500.0

70.0~160.0160.1~220.0220.1~300.0300.1~400.0

100.0~160.0160.1~220.0220.1~300.0300.1~400.0

100.0~160.0160.1~220.0220.1~300.0300.1~400.0

400.1~500.0

400.1~500.0200.0~260.0260.1~320.0320.1~400.0400.1~500.0

R¯0.5

R¯0.5

N

ANGULAR PINS

58HRC~(Induction hardening)

0.3Profile tolerance of SR

max.2(R¯0.5 when D=4~8.)

When D˘25,

the pin tip becomes

as shown in

the drawing

on the left.

R¯0.5

when D=4~8.

Machining may leave a chuck keyhole on one end of the pin in case of D=20 or 25. Dimensions of the pins with chuck keyholes are values prior to machining of the holes. In case of D=30 or more, the both ends may have chuck keyholes.

0.3Profile tolerance of SR

max.2(R¯0.5 when D=4~8.)

R¯0.5

when D=4~8.

When D˘25,

the pin tip becomes

as shown in

the drawing

on the left.

*For D4~25, C-chamfering is performed on the edges of the steps.(Recess of C-chamfering for assembling: about C0.3)

In case of D=30 or more, the both ends may have chuck keyholes.Dimensions of the pins with chuck keyholes are values prior to machining of the holes. Machining may leave a chuck keyhole on one end of the pin in case of D=20 or 25.

(Stepped type)

Days

Days

Delivery

Order

Alterations

Express AExpress T

Express A


Rate - 5%

20~2910~191~9

15%10%

30~50

TC=0.1mm increments(Reduces the head thickness. The full length remains unchanged.)

TC min: Fractions are rounded up to the first digit

T>TC˘H/2 tan A+2.0

Single flat chamfering

Available when D¯30

Press-fit section tolerance alteration

Available when D¯30

Adds a 30BTaper on the edge of step.

(Taper for installation)

Combination with CMCDC not available

Available for APS

(Recess of C-chamfering for assembling: about C0.3)Available for APS when D˘30

Performs chamfering on the edge of the step.

Chamfering is performed as standard for D¯25.

DC=0.1mm incrementsTolerance of the step's external diameter:

Changes(D-1)step by designation.

D-0.1˘DC>D-1

Available for APS when D¯30

When DC is used SR=DC2

-0.050

Tapered 30B

Available when N¯200

Dm5 UDChanges+0.005

0

Changes the head shape

from a cone to a single flat cut.

4.2TC=13/2 tan 18B+2.0=4.112

(Stepped type) (No press-fit section)

1BincrementsU/Price for 1~9 0.1mm increments

2625

Quo

tation

Quo

tation

Quo

tation

025-026.ai 5/28/2011 1:56:43 PM


R¯0.5

T S

1.6G

-0.2

Ú0.2

Dm

5

N

f6D

L

SR=D/2

0

H-

0.2

0

SR=D-0.2

2

H

T S

1.6G

-0

.2

-0.2

Ú0.2

Dm

5

N

L

0

0

R¯0.5

L(LC)Catalog No. N (ATCCKACCTTCCDKCCDCCTM)

5

LCatalog No. N

P.i

TC

T

TTC

T

DC

DK

C

L

LC

N

D

8

10~20 SUJ2

SKD11 60~63HRC

58HRC~

APZ

APZS

100APZ13 N30.0LC95APZS13 N30.0

ATC TC6.0A15KAC TTC6.0A15 DC12.5DKC

APZ13 100 N30.0

Alterations Code

ATC

TTC

Spec.

KAC

PricePrice Alterations Code Spec.

LC

DC

TM

DKC

D8

101213151620

LC

40<LC<110

90<LC<180

70<LC<140

50<LC<130

D m5 f6 T HS

APZ APZSCatalog No.

Type D L NAPZ APZS

10

13

15

16

18

23

13 19

10

12

13

15

16

20

8 11 4 3.9

5 4.9

6 5.9

6.5 6.4

7.5 7.4

8 7.9

10 9.9

5

10

12

13

15

16

20

8

APZ

APZS

405060708090

100110

5060708090

100110120130

5060708090

100110120130

708090

100110120130140

708090

100110120130140

90100110120130140150160170180

405060708090

100110

N=0or

N¯L-T-12¯N

max.2(R¯0.5 when D=8.)

max.2(R¯0.5 when D=8.)

f6(

D-0.

2)

AÚ

15'

AB

+0.012+0.006

-0.013-0.022

+0.015+0.007

-0.016-0.027

+0.017+0.008

-0.020-0.033

-ECONOMY TYPE-

(Stepped type)

ANGULAR PINS

(Induction hardening)

Profile tolerance of SR 0.3

Profile tolerance of SR 0.3

When D=8

When D=8


Rate - 5%

10~191~9

10%

20~29

15%

30~50

Express AExpress T

DaysDelivery

Order

Alterations

When this pin is used in combination with an ATC, the overall length becomes the dimension from the thick end face of the flange specified by the ATC.

Full length alteration LC=0.1mm increments

Designation method ATC-A15-TC6.0

Makes the head end into a cone and reduces the head thickness. The full length becomes shorter by(T-TC).The full length is the same as LC when LC is combined.A=1Bincrements A=0~30BTC=0.1mm incrementsT˘TC˘2.0

TC˘H/2 tanA+2.0TC min: Fractions are rounded up to the first decimal place. TC=16/2 tan15B+2.0=4.1432 4.2

Single flat chamferingAdds a single flat on the head.A=1Bincrements A=0~30B

Combination with ATCCTTC not available.

Head thickness change

TTC=0.1mm increments

T>TTC˘2.0

The full length becomes shorter

by(T-TTC).The full length is the

same as LC when LC is combined.

Designation method KAC-A15Changes(D-0.2)step by designation.

DC=0.1mm increments

D-0.1˘DC>D-1Tolerance of the step's external diameter: f6

Available for APZS.

Dm UD+0.005

05

Press-fit section tolerance alteration

Changes

Adds a 30B Taper on the edge of step.

(Taper for installation)

Combination with DC not available.

Available for APZS

Tapered 30B

(Stepped type)(No press-fit section)

U/Price for 1~9 0.1mm increments

2827


Quo

tation

Quo

tation

Quo

tation

027-028.ai 5/28/2011 1:56:52 PM

Extensive Range of Products Increase in Stocks Sizes ... · Extensive Range of Products Increase in...

Documents

Transcript of Extensive Range of Products Increase in Stocks Sizes ... · Extensive Range of Products Increase in...