EXTENSION ARMS - Hi-Line Utility Supply · EXTENSION ARMS SUPER "U" ARMS Hastings Super "U" Arms...

HOT ARMS, GINS, PLATFORMS & LADDERS

• Insulator - Available as a separate item or added to existing auxiliary arm wire holders to upgrade to 34.5kV

• Roller Wire Holder - Offers protection to conductors while raising the conductor above the work area. For conductors up to and including 1.5” diameter. The gate is held closed by a spring-loaded latch.

AUXILIARY ARM ATTACHMENTS

Hot

Arm

s, G

ins,

Pla

tform

s &

Lad

ders

Brand Cat. No. Dimensions Max Cros-sarm Size

No of Wire

Holders

Max Vert Load per

Wire HolderWeight

H4800-60 2.5" x 5' 3.25" x 4.75" 1 150 lb 11.5 lb

5000 2.5" x 5' 4.25" x 6.75" 1 150 lb 11.3 lb

H4800-72 2.5" x 6' 3.75" x 4.75" 2 150 lb 13 lb

5006 2.5" x 6' 4.25" x 6.75" 2 150 lb 14.5 lb

C400-1310 3" x 6' 6" x 6" 2 300 lb 24 lb

Cat. No. Description Max Cros-sarm Size

No of Wire

Holders

Load Limit Weight

7545 Standard Super "U" 4.25" x 6.75" 2 400 lb 18.8 lb7546 Super "U"-large hanger loop 6" x 6" 2 400 lb 20.4 lb7553 Super "U"-large capacity holders 4.25" x 6.75" 2 400 lb 19.8 lb

EXTENSION ARMS

SUPER "U" ARMSHastings Super "U" Arms provide greater strength and durability. Arms are rated for 34.5KV phase-to-phase.• Standard conductor holder

accepts up to 1-1/16" O.D.• Large capacity accommodates

a conductor inside a line hose. Gate latch is 2-5/8"

STANDARD ARMSDesigned for use as a

temporary aid in replacing existing conductors and insulators, or for moving out conductors to obtain working clearance.

• 15KV rating without insulator

• 34.5KV rating with insulator

5006

7546

Cat. No. M4805-7 C400-0268 M4805-17 M4805-15 M4805-16 E400-0008 7551 7552 P640062P P10024

Desc. InsulatorRoller Wire

Holder (no insulator)

1" Fork Wire Holder

(no insulator)

1" Fork Wire Holder

(with insulator)

C-Type Wire Holder

(no insulator)

1.5" Fork Wire Holder (no insulator)

Super "U"

Holder

Super "U" Holder - Lg

Capacity

2.5" Chance

Eyescrew

2.5" Hastings Eyescrew

Weight 2.5 lb 4.5 lb 2 lb 5.5 lb 2.5 lb 2.5 lb 1.2 lb 1.5 lb

• Fork Type Wire Holders - Latch closes automatically behind the conductor to hold it in the wire holder. Includes 2.5” pole clamp.

• C-Type Wire Holders - Suspended for a 2.5” diameter temporary crossarm above the conductor as a hook to receive the conductor after it is untied.

H4800-72

162HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com

HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com


163


SUPER “U” CONDUCTOR SUPPORT WITH STRAP BINDERDesigned for replacing conductors and insulators and maintenance of line voltages up to and including

34.5KV phase to phase. Super "U" design provides greater strength and durability. 200 lb working load per conductor holder. Features a nylon strap.

CONDUCTOR SUPPORT WITH CHAIN BINDER

CONDUCTOR SUPPORT WITH STRAP BINDER

Cat. No. C400-0517Clamps to the crossarm, adjusting to

crossarms from 3.25” x 4” to 4” x 5.” C-clamp can be installed with a Grip-All clampstick. For 34.5kV or when tool is left overnight, a M4805-7 insulator should be added to the wire holders.

Designed for temporary support of conductors up to 1-1/16" O.D. Features a 2" x 44" nylon strap.

Used to hold energized distribution conductors during replacement of poles or repair of pole top and stand-off insulators. Features wheel tightener for poles up to 14" in diameter. Working load: 150 lb per wireholder.

Hot A

rms, G

ins, Platforms

& Ladders

Brand Cat. No. Description Weight

T400-1940 30" with one conductor support 14 lb

5038 34" with one conductor support 12 lb

T400-1939 48" with two conductor supports 18 lb

5040 48.5" with two conductor supports 15 lb

T400-2007 Replacement D Buckle Strap Binder 4.5 lb

5049 Replacement Nylon Strap with Hook 1.0 lb 5038

CROSSARM MOUNTED TEMP. CONDUCTOR SUPPORT

TEMPORARY DEAD END ARMS

Cat. No. Description WeightH4809W Single Conductor Support 20 lb

C400-1509 Two Conductor Supports 22 lbM1848W Fork Type Wire Holder

H4809W30" long

C400-150948" long

Cat. No. Description Weight5045 34.75" Arm with one conductor holder 14.3 lb5047 49-7/8" Arm with two conductor holders 18.0 lb5049 Replacement strap with hook 1.0 lb

Cat. No. Description Width Adjustment7674 Arm with 3 way bracket 3-7/8", 5", 6-1/8"7675 Arm with butt swivel 3-7/8", 5", 6-1/8"7676 Arm with 3 way bracket 6-1/8", 7-1/4", 8-3/8"7677 Arm with butt swivel 6-1/8", 7-1/4", 8-3/8"

Enables a line crew to spread conductors off an existing dead end arm. 3" diameter fiberglass with a 500 lb per position (1000 lb total) load limit. Arms have two holes with 18" spacing. Accommodates 5/8" hardware bolts. Height adjustments are 4-5/8", 4-7/8", 5-7/8" & 6-1/8".

7675

T400-1939

5045

CROSSARM LINK STICK

Cat. No. PSC4004132Quickly puts insulated link in hoist-assisted jobs. Provides 21.5" insulating length. Fits standard 3.75"-4.75" crossarms.


Usable with standard gins, the strap-type ratchet pole binder adds speed and convenience when hanging temporary pole supports or gins.

Transformer Gins: The standard base unit is for mounting on clear pole sections and the 5” extended base model allows mounting to bridge up to 4” x 5” crossarms. The swivel top head can be swiveled to bypass secondary lines when necessary. A wheel tightener and 36” chain is a part of each unit.

Crossarm Gins: Can be used with rope blocks or hand line to lift conductors from their insulators. A removable cadmium plated steel pin provides adjustment for crossarm from 3.5" x 4.5" up to 4.75" x 5.75."

TRANSFORMER GINS WITH STRAP BINDER

Cat. No. T400-1937 T400-1938 5800-1 5800-3 5800-4 5800-7 5800-8

Description Standard Base 5" Extended Base Standard Base 4.5" Extended Base

4.5" Extended Base Standard Base Standard Base

Head Type Standard Standard Standard Standard Standard Swivel Sheave Head

Swivel Sheave Head

Height 26" 26" 24.25" 36" 48" 36" 48"

Load Limit 2000 lb 2000 lb 1300 lb 1300 lb 2500 lb 3800 lb 3800 lb

Repl. Strap T400-2007 T400-2007 5049 5049 5049 5049 5049

Weight 14.25 lb 18.25 lb 8.6 lb 10.6 lb 33 lb 49 lb 52 lb

TRANSFORMER & CROSSARM GINS WITH CHAIN BINDER

Cat. No. C400-0090 C400-0315 C400-0440 H20 T400-0870

Description Transformer Gin w/Standard Base

Transformer Gin w/5" Extended Base

Transformer Gin w/5" Extended Base Crossarm Gin Crossarm Gin

Head Type Standard Standard Swivel Top --- ---

Height 26" 26" 48" 44" 56"

Max Rating 2000 lb 2000 lb 2000 lb 750 lb at 30 deg angle

500 lb at 30 deg angle

Weight 15 lb 30 lb 37 lb 10 lb 12 lb

Hot

Arm

s, G

ins,

Pla

tform

s &

Lad

ders


HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com 165

HOT ARMS, GINS, PLATFORMS & LADDERS HOT ARMS, GINS, PLATFORMS & LADDERS

Platform shown with optional

Railing and Pivot Type Mount. Cat. No. Description Weight

4' PLATFORM AND ACCESSORIES

C402-1042 4' Insulated Platform & Adjustable Pole Mount 49 lbs.

H4964A Epoxiglas Tripod for 4' Platform 9 lbs.

C402-1055 Epoxiglas Railing for 4' Platform 13 lbs.

C402-1164 Pivot-type Pole Mount for 4' Platform 29 lbs.



C402-0023 Epoxiglas railing for 6' Platform 15 lbs.

C402-1173 Pivot-type Pole Mount for 6' or 8' Platform 30 lbs.



C402-0024 Epoxiglas Railing for 8' Platform 17 lbs.

C402-1173 Pivot-type Pole Mount for 6' or 8' Platform 30 lbs.

TOWER MOUNTS, ADJUSTABLE AND PIVOT TYPE ARE ALSO AVAILABLE

Pivot-Type Mount option allows for easy positioning to access jobs. Permits linemen to swivel mounted platform

through 140 horizontal degrees.

4' Platform shown with standard adjustable pole mount and optional Tripod.

EPOXIGLAS INSULATED PLATFORMSTo provide convenient workstations for rubber-glove work on energized lines, these platforms quickly secure to pole with either a fixed mount or pivot mount.

• Two 2" diameter poles connect the platform to the mounting bracket• Features 12" of clear insulation• Maximum load rating: 500 lb• For belt-on/restraining guide, add optional tripod or railing• Three strips of 2" non skid tape proivde improved footing

Cat. No. Description WeightC400-0648 Multi-Duty Gin Complete 70 lb

C85W Mounting Bracket with Wheel Tightener 17 lb

• Gin clamps at top of pole to lift heavy equipment

• Gin can be mounted lower on pole without changing mounting bracket to avoid obstructions

• 4”x4” Epoxiglas beam w/2000 lb. load rating• With beam removed, mounting bracket can be used by itself for

hanging transformers• Maximum rating of gin bracket is 2500 lbs. • The gin beam can be rotated in a half circle, swinging the load away

from underbuild obstructions.

Hot A

rms, G

ins, Platforms

& Ladders

SURFACE GUARD

Cat. No. Protec-tor Size Pole Dia.

PSC406-0624 7" x 4' up to 15"PSC406-0625 7" x 5' up to 19"PSC406-0626 7" x 6' up to 23"PSC406-0627 7" x 7' up to 27"

Protective cover for mounting chain binder tools to concrete, fiberglass, and steel poles. Protects pole with-out reducing tools' load rating.

MULTI DUTY GIN

Jib mounted, winch-driven three phase boom lifts enable a material-handler boom truck to lift single- or three-phase system conductors.

Center wire holder, used alone,

permits single phase lifts.

Boom adapter can pin at various angles. Built-in scale continuously monitors load uplift. Nylon rollers ensure

smooth mast travel.

Wireholders latch easily from bucket with hookstick. 12" Epoxirod

link insulates each latch-release lanyard.


BOOM WIPES

Cat. No. LengthB-1 Individually Packaged Wipes (24/case)

B-D72 Canister of 72 wipes

THREE-PHASE BOOM LIFTS

Cat. No. Truck Application WeightC400-1612 Asplundh: 3-3/4" diameter jib 225 lbC400-1613 Telelect: 4-1/4" diameter jib 225 lb

C400-1614 Holan: 5-1/8" diameter jib 225 lb

C400-1664 Altec: 4" diameter jib 225 lb

C400-1677 High Ranger: 2-7/8" diameter jib 225 lb

C400-1709 Teco: 4" x 4" square jib 225 lb

C400-1710 Pitman: 4" x 5" square jib 225 lb

C400-1711 R.O. Products: 5-1/4" diameter jib 225 lb

Other sizes available, please call for more information

• For crossarm construction: 10’ arm attaches at mast top (pictured)

• For armless construction: 6’ arm attaches at proper level on series of mounting holes on mast

Each complete unit includes:• 10' Vertical orange Epoxiglas mast (4" x 4")• 10' Horizontal gray Epoxirod support arm (2-1/2" dia.)

with four Roller-type Wireholders• 6' Horizontal gray Epoxirod support arm (2-1/2" dia.)

with one wireholder for center mast • Storage bags for all components above

• Operator remains in bucket, positioned to perform such routine jobs as replacing insulators, crossarms or poles

• Wireholders latch easily from bucket with hookstick• 12" Epoxirod link insulates each latch-release lanyard• Vertical load per wireholder: 300 lb • Balanced vertical load: 1200 lb (including tool)

The pre-wash wipe is a cleaner-saturated towel that cleans grease, tar, creosote, salt spray, pine pitch, hydraulic fluid and road debris off fiberglass boom arms. Washes off during sub-sequent water rinsing.

Hot

Arm

s, G

ins,

Pla

tform

s &

Lad

ders




BOOM MOUNTED LIFT ARMBoom mounted lift arm can be utilized as a lifting attachment when mounted to derrick trucks and bucket trucks with lifting capabilities.• Can be used for changing out poles, cross arms, insulators and mid

span lifting requirements• Lift arm can be mounted to a square, rectangular, round, or oval boom

(order proper boom adapters & blocks)• Mounting assembly features a ratchet which allows the arm to be posi-

tioned under load• Fiberglass arm and mast assembly is 3" O.D. while the fiberglass brace

is 1.5" O.D.• Balanced load limit with brace is 1,000 lb. Unbalanced load limit is

200 lb per conductor holder.• Arm assembly includes swivel support, brace, (2) brace clamps, and

(3) fourway rollers.

Cat. No. 11686 11683 13128 13129

DescriptionBoom Bracket with Ratchet

Assembly, fits 8"x8" to 11"x11" booms

Mast Assembly5' x 3" with quick detach pin

Arm Assembly9' x 3"

Arm Assembly11' x 3"

Weight 38 lb 9.3 lb 37 lb 40 lb

Cat. No. 21642 12666 5034 12366 JTC-500

Description Self Aligning Conductor Holder

Super Duty Conductor Holder

Four Way Conductor Holder

Suspension Insulator String Holder

Rope Sheave Head

Application1.5" opening, for attach-

ment to mast. Spring loaded latch is hot stick

operable

For attachment to mast and jib adapters. Accepts

2" dia conductors.

For mounting to 3" OD arm. Opening is 1.5". Spring loaded latch is

hot stick operable

For attachment to mast. Works on

both 9" and 10" dia insulators

For 3/4", 500 lb swl

Max Load 300 lb 500 lb 300 lb --- ---

Hot A

rms, G

ins, Platforms

& Ladders

Available by application:


JIB EXTENSIONS

A C400-0747 Roller WireholderB P400-1594P Round Jib AdapterC T400-1525 3" dia. Round Jib Extension

D C400-1669 Roller WireholderE T400-1525 3" dia. Round Jib Extension

F C400-0747 Roller WireholderG P400-2536P Square Jib AdapterH PST400-2748 4"x4" Square Jib Extension

I PST400-2818 3" dia. Round Jib Extension with Wireholder

J PST400-3059 3" dia. Round Jib Extension with Wireholder & Sheave

F GH

DE

A BC

• 15KV Hot Stick Work only• 15KV Rubber Glove work from an insulated platform• 15KV Hot Stick Work, Rubber Glove, & Underground work• 25KV Rubber Glove work from an insulated platform• 25KV Rubber Glove work from an insulated bucket truck• 35KV Rubber Glove work from an insulated platform• 15, 25 & 35KV Hot Stick Work only• 15, 25 & 35KV Hot Stick Work & Rubber Glove Work• 15, 25 & 35KV Hot Stick Work, Rubber Glove & Underground Work• 15 - 69KV, 477 kcmil and smaller, Hot Stick Work only• 69KV, 477 kcmil and smaller, No Underbuild, Hot Stick Work• 69KV, 477 kcmil and smaller, With Underbuild, Hot Stick Work• 69 - 161KV, 477 kcmil and smaller, No Underbuild, Hot Stick Work• 69 - 161KV, 477 kcmil and smaller, With Underbuild, Hot Stick Work

Please call for a copy of any of these tool lists

TOOL TRAILER TOOL LISTS

Hot

Arm

s, G

ins,

Pla

tform

s &

Lad

ders

I

J




• Hooks are formed from 1" tempered steel and can be swiveled.

• Steel chains clip to hooks to assist in securing ladder to support

• Rung material for both rated ladders are 1-1/4" sand-coated Epoxiglas

SWIVEL HOOK LADDERS

Cat. No. Length Max Work Load Weight

Standard Duty

2" Side Rails & 8" Hooks

H4904-8 8' 1250 lb 42 lb

H4904-10 10' 1250 lb 46 lb

H4904-12 12' 1250 lb 52 lb

H4904-14 14' 1250 lb 60 lb

H4904-16 16' 1250 lb 68 lb

Heavy Duty 2.5" Side Rails

& 8" Hooks

H4905-8 8' 1250 lb 47 lb

H4905-10 10' 1250 lb 55 lb

H4905-12 12' 1250 lb 63 lb

H4905-14 14' 1250 lb 70 lb

H4905-16 16' 1250 lb 76 lb

H4905-18 18' 1250 lb 85 lb

H4905-20 20' 1250 lb 98 lbAdd suffix "A" to Cat No for 14" hooks (1000 lb work load)Add suffix "B" to Cat No for 18" hooks (750 lb work load)

Length Cat. No.(7.5" Hooks)

Cat. No.(12" Hooks)

Cat. No.(15.5" Hooks)

Standard Duty

2" Side Rails

8' 7235 7240 7245

10 7236 7241 7246

12' 7237 7242 7247

14' 7238 7243 7248

16' 7239 7244 7249

Heavy Duty 2.5" Side Rails

10' 13023 13024 13025

12' 13026 13027 13028

14' 13029 13030 13031

16' 13032 13033 1303418' 13035 13036 13037

20' 13038 13039 13040

Swivel hook ladders are available in standard duty and heavy duty:

• Standard Duty Ladders (2" side rails) are normally used for vertical suspension applications.

• Heavy Duty Ladders (2.5" side rails) are recommended where men are required to work from the ladder in a tagged out position

Hot A

rms, G

ins, Platforms

& Ladders

• Hooks fold for storage. • Plated steel safety

chains are standard. • Fiberglass rails and

rungs have a solid foam core and are coated with non-slip grit.


The greater mechanical strength and less deflection of the Three Rail Ladder increases the efficiency of the lineman when working in a tagged-out position.

2.5" center rail is capped on both ends and 2" side rails with 8" swivel hooks on top and caps on bottom.

THREE RAIL LADDER

Cat. No. Description WeightC402-0119 20' Straight Ladder 100 lbC402-0512 8' Bottom Section 43 lb

C402-0513 12' Bottom Sectoin 52 lb

C402-0514 12' Top Section 62 lb

All models are two section, spliced fiberglass ladders featuring heavy duty 2.5" siderails. Ladder options include three hook sizes.

Cat. No. Top SectionLength Weight

C402-0482 10' 44 lb

C402-0402 12' 48 lb

C402-0404 14' 52 lb

C402-0407 16' 46 lb

C402-0411 20' 64 lb

T402-0423 10' middle section 44 lb

C402-0418 8' bottom section 28 lb

C402-0421 10' botom section 32 lb

C402-0422 12' bottom section 36 lb

Cat. No. 059738P - Klik PinCat. No. P402-0041 Eye Pin

Length Cat. No.(7.5" Hooks)

Cat. No.(12" Hooks)

Cat. No.(15.5" Hooks)

16' (10' & 6') 20898 20899 20900

18' (12' & 6') 20901 20902 20903

20' (14' & 6') 20904 20905 20906

22' (14' & 8') 20907 20908 20909

24' (14' & 10') 20910 20911 20912

KLIK PIN 059738P

EYE PIN P402-0041

All models are heavy duty with 2.5" siderails. Chance ladders feature 8" hooks and are interchangeable, offering many options for total reach.

SPLICED LADDERS

Hot

Arm

s, G

ins,

Pla

tform

s &

Lad

ders


HI-LINE UTILITY SUPPLY CO.Phone: 800-323-6606 Fax: 847-488-1285 www.hilineco.com


171


LADDER SUPPORT ATTACHMENTS• Converts epoxiglas ladder to a platform for

live-line maintenance• Kits are designed for use on 2.5"-dia. side

rail ladders. For 2" side rail application order individual components (call customer service for assistance)

• Sets are designed for steel or wood structures, vertical or horizontal

• Support the structure-end of the ladder in a tagged-out position

Kit Consists of:C402-0139

for Vertical Attach. on Towers

C402-0140for Horiz. Attach.

on Towers

C402-0155for Vertical Attach. on

Wood/Steel PolesE402-0525

Vertical Tower Attachment

1

E402-0087Horizontal Attach.

Tower1

E402-0526Vertical Attach. Pole 1

E402-0568 Yoke Assembly 1 1 1

E402-0009Spreader Bar 1 1 1

E402-0138Ladder Clamp 2 2 2

E402-0141Swivel Stick 2 2 2

E402-0092 Double Clamp 1 1 1

Can be ordered as individual components or in a kit

Vertical Tower Mount Horizontal Tower Mount Vertical Wood/Steel Pole Mount

Spreader BarE402-0009

Ladder ClampE402-0138 (for 2.5" side rails)PST400-0833 (for 2" side rails)

Double ClampE402-0092

Cat. No. DescriptionE402-0141 12.5' Swivel StickT402-0899 6' Swivel Stick

T402-0900 8' Swivel Stick

T402-0901 10' Swivel Stick

For ladders with 2" side rails, in addition to tower assembly and other accessories, you will need the following specially sized yoke assembly and ladder clamp:• Cat. No. PSE4020568001

Yoke Assembly for 2" side rails

• Cat. No. PST400-0833 Ladder Clamp for 2" side rails

Yoke AssemblyE402-0568 (for 2.5" side rails)

PSE4020568001 (for 2" side rails)

E402-0525 (Support

Assembly)

E402-0568 (Yoke

Assembly)

E402-0568 (Yoke

Assembly)

E402-0087(Support

Assembly)

E402-0526(Support

Assembly)

E402-0568 (Yoke

Assembly)

Hot A

rms, G

ins, Platforms

& Ladders

Kit Options:

EXTENSION ARMS - Hi-Line Utility Supply · EXTENSION ARMS SUPER "U" ARMS Hastings Super "U" Arms...

Documents

Transcript of EXTENSION ARMS - Hi-Line Utility Supply · EXTENSION ARMS SUPER "U" ARMS Hastings Super "U" Arms...