Explosion-Proof LED Warning Light
2
80 Model 27XL explosion-proof LED light is unique to the market because it covers an entire range of possible mounting configurations – including dome up. Configurable to either steady burning state or flashing mode, 27XL provides improved performance over standard LEDs and increased versatility while maintaining low power consumption and vibration resistance expected from LED devices. The 27XL features a standard low in-rush circuitry design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices. Corrosion resistance is achieved with a powder coat finish applied over the copper-free aluminum housing. Because it is easy to install and requires very low maintenance, it is ideal for use in areas such as oil rigs, mines, refineries, and chemical plants. F E A T U R E S • Approved for mounting in any manner– including dome up • Available in 24VAC/DC and 120-240VAC • 50,000 hour LED • Six lamp/lens colors: Amber, Blue, Clear, Green, Magenta and Red • 3/4" NPT pendant, ceiling and wall mount options available • Flashing or steady-burn mode • Dome guard optional • Type 4X, IP66 enclosure • Marine Rated • UL and cUL Listed for Class I, Division 1, Groups C and D; Class II, Division 1, Groups E, F and G; Class I, Division 2, Groups A, B; and Class III Model 27XL Explosion-Proof LED Warning Light MODEL VOLTAGE OPERATING CURRENT IN-RUSH CURRENT FLASH RATE/ MINUTE 27XL-024 * -MOD 1 24VAC/DC 400 mA 1.75 amps, 5.0 mS 60 27XL-120-240 * -MOD 1 120/240VAC 210/130 mA 2.00 amps, 0.25 mS 60 * Indicates color: (A) Amber, (B) Blue, (C) Clear, (G) Green, (M) Magenta or (R) Red 1 See “how to order” for mounting options. (Shown with pendant mount. See how to order for mounting options) HAZARDOUS LOCATION RATING: 27XL T-CODE AT MAXIMUM AMBIENT TEMPERATURE, °C Hazardous Location 40ºC 55ºC 66ºC 24VAC/DC 100-265VAC 24VAC/DC 100-265VAC 24VAC/DC 100-265VAC Class I, Division 1, Groups C, D T6 T6 T6 T6 T6 T6 Class I, Division 2, Groups A, B T6 T6 T6 T5 T5 T4A Class II, Division 1, Groups E, F, G T6 T6 T6 T6 T4A T4A Class III T6 T6 T6 T6 T6 T6
Transcript of Explosion-Proof LED Warning Light
8 0
Model 27XL explosion-proof LED light is unique to the market because it covers an entire range of possible mounting configurations – including dome up.
Configurable to either steady burning state or flashing mode, 27XL provides improved performance over standard LEDs and increased versatility while maintaining low power consumption and vibration resistance expected from LED devices.
The 27XL features a standard low in-rush circuitry design that provides greater compatibility with factory automation control systems and less electrical interference with in-rush sensitive devices. Corrosion resistance is achieved with a powder coat finish applied over the copper-free aluminum housing.
Because it is easy to install and requires very low maintenance, it is ideal for use in areas such as oil rigs, mines, refineries, and chemical plants.
F E A T U R E S
• Approvedformountinginanymanner–including dome up
• Availablein24VAC/DCand120-240VAC
• 50,000hourLED
• Sixlamp/lenscolors: Amber,Blue,Clear,Green,MagentaandRed
• 3/4"NPTpendant,ceilingandwallmountoptions available
• Flashingorsteady-burnmode
• Domeguardoptional
• Type4X,IP66enclosure
• MarineRated
• ULandcULListedforClassI,Division1,GroupsCandD;ClassII,Division1,GroupsE,FandG;ClassI,Division2,GroupsA,B;andClassIII
Model 27XL
Explosion-Proof LED Warning Light
M O D E L V O L T A G EO P E R A T I N G C U R R E N T
I N - R U S H C U R R E N T
F L A S H R A T E /M I N U T E
27XL-024 * -MOD1 24VAC/DC 400mA 1.75amps,5.0mS 60
27XL-120-240 * -MOD1 120/240VAC 210/130mA 2.00amps,0.25mS 60
*Indicatescolor:(A)Amber,(B)Blue,(C)Clear,(G)Green,(M)Magentaor(R)Red1See“howtoorder”formountingoptions.
(Shownwithpendantmount.Seehowtoorderformountingoptions)
HAZARDOUS LOCATION RATING: 27XL
T-CODE AT MAXIMUM AMBIENT TEMPERATURE, °C
Hazardous Location 40ºC 55ºC 66ºC
24VAC/DC 100-265VAC 24VAC/DC 100-265VAC 24VAC/DC 100-265VAC
ClassI,Division1,GroupsC,D T6 T6 T6 T6 T6 T6
ClassI,Division2,GroupsA,B T6 T6 T6 T5 T5 T4A
ClassII,Division1,GroupsE,F,G T6 T6 T6 T6 T4A T4A
ClassIII T6 T6 T6 T6 T6 T6
VI
SU
AL
S
IG
NA
LS
US - 2645 Federal Signal Dr., University Park, IL 60484 Tel: +1 708.534.4756 Email: [email protected] www.fedsig.com | 81UK - Silk House, 3rd Floor, Park Green, Macclesfield, Cheshire. SK11 7NA. Tel: +44 (0)1625 66 66 00
Explosion-ProofLEDLight(27XL)
LampLife: 50,000HoursLightSource: LEDArrayOperatingTemperatureRange: -67ºFto150ºF-55°Cto65°CNetProductWeight SignalwithoutMounting: 13.9lbs 6.3kg CeilingMount: 4.5lbs 2.0kg PendantMount: 2.0lbs 0.9kg WallMount: 5.9lbs 2.7kg
Description Part Number
ExteriorDomeAssembly,Clear K8436147A
InteriorLensAssembly,Amber K8550292A-02 InteriorLensAssembly,Blue K8550292A-01 InteriorLensAssembly,Clear K8550292A InteriorLensAssembly,Green K8550292A-04
InteriorLensAssembly,Magenta* K8550292A-05 InteriorLensAssembly,Red K8550292A-03
PCboardassembly,24VDC K2005455A PCboardassembly,120/240VAC K2005416A
LEDarray,Amber K14700030A-A LEDarray,Blue K14700030A-B LEDarray,Clear K14700030A-W LEDarray,Green K14700030A- LEDarray,Red K14700030A-R
*OrderLEDarray,ClearwiththeMagentaInteriorLensAssembly.
S P E C I F I C A T I O N S
H O W T O O R D E R
MODA27XL
TYPE27XL
024
VOLTAGE 024 (24VDC)120-240 (120-240VAC)
COLORAAmberB BlueC ClearGGreenM MagentaRRed
--
5.25"/133 mm
2Xø0.27[ø7]
View A-A4.63"/117 mmMin. bolt circle
Wall MountBracket
14.81"/ 376 mm
15.4
8"/
393
mm
10.41"/ 264 mm0.38"/10 mm
4X 3/4" NPT
1-1/4" NPT A
A
Fresnel Lens
Glass Dome
11.
37"/
289
mm
ø8.82"/ 224 mm
High IntensityLED Array
Cast AluminumCorrosion-Resistant
Explosion-ProofHousing
StandardLEDModel
3/4"NPT
ø8.80"/ 224 mm
14.
54"
/ 36
9 m
m
PendantMount
CeilingMount
14.
26"/
362
mm
0.30"/8 mm4X3/4" NPT
6.92"/176 mm
4X0.31"8mm
View A-A
6.03"/ø153mmMin. bolt circle
AA
R E P L A C E M E N T P A R T S
O P T I O N A L A C C E S S O R I E S
Description Part Number
DomeGuard DGXC-SB
Specify Optional Mounting:*
Description Part Number
CeilingMount CMXC-SB
PendantMount PMXC-SB
WallMount WMXC-SB* Mounting kit must be ordered with unit, sold separately
