Exploration Routing Chapter 2(Bupt)
Transcript of Exploration Routing Chapter 2(Bupt)
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
1/61
Cisco ConfidentialPresentation_ID 1
Static Routing
Routing Protocols and Concepts Chapter 2
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
2/61
2
Objectives
Define the general role a router plays in networks.
Describe the directly connected networks, differentrouter interfaces
Examine directly connected networks in the routing
table and use the CDP protocol Describe static routes with exit interfaces
Describe summary and default route
Examine how packets get forwarded when using staticroutes
Identify how to manage and troubleshoot static routes
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
3/61
3
Context Index
2.1 Router and Network
2.2 Router Configuration Review
2.3 Exploring Directly Connected Networks
2.4 Static Route with Next Hop Address
2.5 Static Routes with Exit Interfaces
2.6 Summary and Default Static Routes
2.7 Managing and Troubleshooting Static Routes
2.8 Static Route Configuration Labs
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
4/61
Cisco ConfidentialPresentation_ID 4
2.1 Router and Network
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
5/61
5
2.1.1 Role of the Router
Functions of a Router Best Path Selections
Forwarding packets to destination
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
6/61
6
2.1.2 Introducing the Topology
Introducing the Topology
3 routers connected via WAN links
Each router connected to a LAN represented by a switch and a PC
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
7/61 7
2.1.3 Examining the connection of the Router
Connections of a Router for WAN-A router has a DB-60 port that can support 5 differentcabling standards
Connections of a Router for Ethernet
-2 types of connectors can be used: Straight throughand Cross-over
Straight through used to connect:
-Switch-to-Router, Switch-to-PC, Hub-to-PC, Hub-to-Server
Cross-overused to connect:
-Switch-to-Switch, PC-to-PC, Switch-to-Hub, Hub-to-Hub, Router-to-Router , Router-to-Server
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
8/61 8
2.1.3 Examining the connection of the Router
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
9/61Cisco ConfidentialPresentation_ID 9
2.2 Router
Configuration Review
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
10/61 10
2.2.1 Examining Router Interfaces
Examining Router Interfaces-Show ip route command used to view routing table
-Show Interfaces command used to show status ofan interface
-Show ip Interface briefcommand used to show aportion of the interface information
-Show running-configcommand used to showconfiguration file in RAM
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
11/61 11
2.2.1 Examining Router Interfaces
shutdown
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
12/61 12
2.2.2 Configuring an Ethernet Interface
Unsolicited Messages from IOS
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
13/61 13
2.2.2 Configuring an Ethernet Interface
Reading the Routing Table
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
14/61 14
2.2.3 Verifying Ethernet interface
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
15/61 15
2.2.3 Verifying Ethernet interface
Ethernet interfaces participate in ARP
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
16/61 16
2.2.4 Configuring a Serial Interface
Configuring a Serial interface
-Enterinterface configuration mode
-Enter in the ip address and subnet mask
-Enter in the no shutdown command
Example:R1(config)# interface serial 0/0/0interface serial 0/0/0
R1(config-if)# ip addressip address 172.16.2.1 255.255.255.0
R1(config-if)# no shutdownno shutdown
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
17/61 17
Physically connecting a WAN Interface
A WAN Physical Layer connection has sides:
Data Circuit-terminating Equipment (DCE) This is the service provider.CSU/DSU is a DCE device.
Data Terminal Equipment (DTE) Typically the routeris the DTE device.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
18/61 18
2.2.5 Examining Router Interfaces
Configuring serial links in a lab environmentOne side of a serial connection must be considered a DCE
This requires placing a clocking signal use the clock ratecommand.
Example:
R1(config)# interface serial 0/0/0R1(config-if)# clockrateclockrate64000
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
19/61
19
2.2.5 Examining Router Interfaces
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
20/61Cisco ConfidentialPresentation_ID 20
2.3 Exploring Directly
Connected Networks
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
21/61
21
2.3.1 Verifying Changes the Routing Table
Routing Table Concepts
show ip routeshow ip routecommand reveals the content of therouting table.
Why only have oneConnected Route?
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
22/61
22
2.3.1 Verifying Changes the Routing Table
Observing Routes as They are Added to the Routing Table.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
23/61
23
2.3.1 Verifying Changes the Routing Table
Remove a Connected Route from Routing Table
Disable debug ip routing by using either the undebug ip routingcommand or the undebug allcommand.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
24/61
24
2.3.2 Devices on Directly Connected Networks
When a router only has its interfaces configured & no other routingprotocols are configured then:
-The routing table contains only the directly connected networks
-Onlydevices on the directly connected networks are reachable
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
25/61
25
2.3.2 Devices on Directly Connected Networks
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
26/61
26
2.3.2 Devices on Directly Connected Networks
Pings are discarded
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
27/61
27
Purpose of CDP
A layer 2 Cisco proprietary tool used to gather information
about otherdirectly connected Cisco devices.
Concept of neighbors
2 types of neighbors
Layer 3 neighbors
Layer 2 neighbors (CDP operates at Layer 2 only)
2.3.3 Cisco Discovery Protocol (CDP)
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
28/61
28
2.3.3 Cisco Discovery Protocol (CDP)
CDP Operation ( 60s 180s)
CDP show commands
Show cdp neighborsShow cdp neighbors
Displays the following information:
Neighbor device ID
Local interface
Holdtime value, in seconds
Neighbor device capability code
Neighbor hardware platform
Neighbor remote port ID
Show cdp neighbors detailShow cdp neighbors detail
-Useful in determining if an IP address configurationerror
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
29/61
29
2.3.4 Using CDP for Network Discovery
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
30/61
Cisco ConfidentialPresentation_ID 30
2.4 Static Route with
Next Hop Address
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
31/61
31
2.4.1 Purpose and Command Syntax of ip route
Purpose ofip route
A manually configured route used when routing from anetwork to a stub network
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
32/61
32
2.4.1 Purpose and Command Syntax of ip route
IP route command
To configure a static route use the following command: ip route
Example:
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
33/61
33
2.4.2 Configuring Static Route
Installing a Static Route in the Routing Table
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
34/61
34
2.4.2 Configuring Static Route
Configuring routes to 2 or more remote networksR1(config)# ip routeip route 192.168.1.0 255.255.255.0 172.16.2.2192.168.1.0 255.255.255.0 172.16.2.2
R1(config)# ip routeip route 192.168.2.0 255.255.255.0 172.16.2.2192.168.2.0 255.255.255.0 172.16.2.2
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
35/61
35
2.4.3 Routing Table Principles and Static route
3 Routing principles
PingPC1 to 172.16.2.1PC1 to 172.16.2.2PC1 to PC2PC3 to PC2
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
36/61
36
2.4.3 Routing Table Principles and Static route
Finish the configuration
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
37/61
37
2.4.4 Recursive Route Lookup
Resolving to an Exit Interface The routerfirst must match static routes destination IP address
with the Next hop address
The next hop address is then matched to an exit interface
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
38/61
38
2.4.4 Recursive Route Lookup
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
39/61
39
2.4.4 Recursive Route Lookup
Exit Interface is Down
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
40/61
Cisco ConfidentialPresentation_ID 40
2.5 Static Routes with
Exit Interfaces
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
41/61
41
2.5.1 Static Route and an Exit Interface Configuring a Static route with an Exit Interface ( )
single search instead of 2 searches. serial point-to-point networks.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
42/61
42
2.5.2 Modifying Static routes Modifying Static routes
Existing static routes cannot be modified. The old static route must bedeleted by placing no in front of the ip route
Example:
nono ip route 192.168.2.0 255.255.255.0 172.16.2.2
A new static route must be rewritten in the configuration
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
43/61
43
2.5.3 Verifying the Static Route Configuration
Try it
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
44/61
44
2.5.4 Static routes and Ethernet exit interfaces
ARP
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
45/61
Cisco ConfidentialPresentation_ID 45
2.6 Summary and
Default Static Routes
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
46/61
46
2.6.1 Summary Static Route
Summarizing routes reduces the size of the routing table.
Route summarization is the process ofcombining a number of staticroutes into a single static route.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
47/61
47
2.6.1 Summary Static Route
Configuring a summary static route
Step 1: Delete the current static routeStep 2: Configure the summary static route
Step 3: Verify the new static route
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
48/61
48
2.6.2 Default Static Route
Default Static Route
This is a route that will match all packets.
Stub routers that have a number of static routes all exiting the
same interface are good candidates for a default route.
Configuring a default static route
Example:
Router(config)# ip route 0.0.0.0 0.0.0.00.0.0.0 0.0.0.0[exit-interface |
ip-address ]
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
49/61
49
2.6.2 Default Static Route
Default static routes and subnet masksSince the subnet mask used on a default static route is 0.0.0.0 allpackets will match.
R1(config)# ip route 0.0.0.0 0.0.0.0 serial 0/0/0ip route 0.0.0.0 0.0.0.0 serial 0/0/0
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
50/61
50
Verifying a Default Static Route
Before
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
51/61
Cisco ConfidentialPresentation_ID 51
2.7 Managing andTroubleshooting Static
Routes
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
52/61
52
2.7.1 Static Routes and Packet Forwarding
The following is an example of the packet forwarding process with staticroutes. As you can see in the animation, PC1 is sending a packet to PC3:
1. The packet arrives on the FastEthernet 0/0 interface of R1.
2. R1 does not have a specific route to the destination network, 192.168.2.0/24; therefore, R1uses the default static route.
3. R1 encapsulates the packet in a new frame. Because the link to R2 is a point-to-point link, R1adds an "all 1s" address for the Layer 2 destination address.
4. The frame is forwarded out the serial 0/0/0 interface. The packet arrives on the Serial 0/0/0interface on R2.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
53/61
53
2.7.1 Static Routes and Packet Forwarding
The following is an example of the packet forwarding process with staticroutes. As you can see in the animation, PC1 is sending a packet to PC3:
5. R2 decapsulates the frame and looks for a route to the destination. R2 has a static route to192.168.2.0/24 out Serial0/0/1.
6. R2 encapsulates the packet in a new frame. Because the link to R3 is a point-to-point link,R2 adds an "all 1s" address for the Layer 2 destination address.
7. The frame is forwarded out the Serial0/0/1 interface. The packet arrives on the Serial0/0/1interface on R3.
8. R3 decapsulates the frame and looks for a route to the destination. R3 has a connected routeto 192.168.2.0/24 out FastEthernet 0/1.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
54/61
54
2.7.1 Static Routes and Packet Forwarding The following is an example of the packet forwarding process with static routes.
As you can see in the animation, PC1 is sending a packet to PC3:
9. R3 looks up the ARP table entry for 192.168.2.10 to find the Layer 2 MAC address forPC3.
a. If no entry exists, R3 sends anARPrequest out FastEthernet 0/0.
b. PC3 responds with anARP reply which includes the PC3 MAC address.
10. R3 encapsulates the packet in a new frame with the MAC address of interfaceFastEthernet 0/0 as the source Layer 2 address and the MAC address of PC3 as thedestination MAC address.
11. The frame is forwarded out the FastEthernet 0/0 interface. The packet arrives on the
NIC interface of PC3.
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
55/61
55
2.7.2 Troubleshooting a Missing Route
Tools that can be used to isolate routing problemsinclude:
-Ping tests end to end connectivity
-Traceroute used to discover all of the hops (routers)
along the path between 2 points-Show ip route used to display routing table & ascertainforwarding process
-Show ip interface brief used to show status of router
interfaces
-Show cdp neighbors detail used to gather configurationinformation about directly connected neighbors
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
56/61
56
2.7.3 Solving a Missing Route
Finding a missing or mis-configured route requires
methodically using the correct tools.
-Start with PING. If ping fails then use tracerouteto
determine where packets are failing to arrive
Issue: show ip routeto examine routing table.
-If there is a problem with a mis-configured static route
remove the static route then reconfigure the new static
route
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
57/61
57
2.7.3 Solving a Missing Route
R2(config)# no ip route 172.16.3.0 255.255.255.0serial0/0/1
R2(config)# ip route 172.16.3.0 255.255.255.0serial 0/0/0
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
58/61
Cisco ConfidentialPresentation_ID 58
2.8 Static Route
Configuration Labs
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
59/61
59
Summary Routers
-Operate at layer 3-Functions include best path selection & forwardingpackets
Connecting Networks
WANsSerial cables are connected to router serial ports.
In the lab environment clock rates must be configuredfor DCE
LANs
Straight through cables or cross over cables are usedto connect to fastethernet port. (The type of cableused depends on what devices are being connected)
Cisco Discovery Protocol
A layer 2 proprietary protocol
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
60/61
60
Summary Static Routes
-This is a manually configured path that specifies how the router will getto a certain point using a certain path.
Summary static routes-This is several static routes that have been condensed into a singlestatic route.
Default route
-It is the route packets use if there is no other possible match for theirdestination in the routing table.
Forwarding of packets when static route are used-Zinins 3 routing principles describe how packets are forwarded
Troubleshooting static routes may require some of the followingcommands:
-Ping
-Traceroute
-Show IP route
-Show ip interface brief
-Show cdp neighbors detail
-
8/2/2019 Exploration Routing Chapter 2(Bupt)
61/61