Expert_Hot stamping_presshardening_ Loiresafe
-
Upload
ad-consultores-de-direccion-y-estrategia -
Category
Documents
-
view
214 -
download
1
description
Transcript of Expert_Hot stamping_presshardening_ Loiresafe
www.loiresafe.com
SheetSheet metal metal
Hot Hot StampingStamping / / PressPress hardeninghardening
www.loiresafe.com
Location of the company
www.loiresafe.com
Manufacturing facilities
www.loiresafe.com
General presentation
� RANGE OF PRODUCTS� Registered trademark : « LOIRSAFE ».� Design, machining, mechanical and hydraulic
assembly,starting up, etc…. :� Hydraulic Presses.
� Sheet metal Hot Stamping.� Cold sheet metal Drawing / Stamping.� Try out.� Aircraft (Hydroforming, drawing against rubber pad, etc….).� Lines of Presses.� Forging.� Railways.� Plastic compression / moulding.� Automation of presses.
www.loiresafe.com
LOIRE SAFE - Award certificate
� Award received fromthe companyBENTELER GmH. (Germany) as BEST SUPPLIER OF THE YEAR 2.003 forCAPITAL GOODS
www.loiresafe.com
Hot Stamping - History
� The automotive industry starts to use thisprocess in 80.
� LOIRE SAFE supplied the first line in 1.998.
� Nowadays there are more than 100 productionhot stamping lines around the world.
www.loiresafe.com
Hot Stamping - Process
� Blanks are heated to 950 º C in a furnace.� The heating time is important to achieve the
proper material structure.� The heated blank must be loaded into the
press a.s.a.p. to avoid cooling of the material.� The press has to close , draw the part and
keep it closed for several seconds.� During this time, the cooling circuits in the
upper and lower dies are cooling the part to200ºC (≈).
www.loiresafe.com
Hot Stamping - Material
www.loiresafe.com
Hot Stamping
� Advantages of Hot Stamping:� High tensile strength.
� Reduction of the part weight.� Improvement of mechanical characteristics.
� High dimensional stability, no springback.� Reduction on the required press force (400
– 1.200 mT. for Hot Stamping instead of 2.500 mT. for Cold stamping).
www.loiresafe.com
Typical hot forming parts
� B – Pillar
� A – Pillar
� B – Pillar reinforcement
� Door reinforcement
� Bumper
� Dachrahmen / roof frame
� Pedaltopf
www.loiresafe.com
Hot Stamping Lines - References
AMERICA : 4EUROPE : 18
ASIA : 1
www.loiresafe.com
Line lay out – several possibilities
Blanksloading
areaFurnace
Pressfeeding
HydraulicPress
Unloading area
www.loiresafe.com
Trimming Lines
� The piecesproduced by Hot formingmust be finished(holespunching, auxiliary cuts, etc….) in finishing Presses also supplied by LOIRE SAFE.
www.loiresafe.com
Hydraulic Presses
Zikuñaga 2220.120 HERNANISpainTel. : + 34 943 33 12 14.Fax : + 34 943 55 73 09.E-mail : [email protected] site : www.loiresafe.com