Expansion joint profiles for movement joints in floors€¦ · MIGUTEC Expansion joint profiles for...
-
Upload
trinhthuan -
Category
Documents
-
view
219 -
download
3
Transcript of Expansion joint profiles for movement joints in floors€¦ · MIGUTEC Expansion joint profiles for...
MIGUTEC
Expansion joint profiles for movement joints in floors
Developed for modern architecture for aggressive media, hygienic areas, refurbishment, renovation and drywalls, contraction joints
walls and ceilings
Refurbishment/Renovation
Drywall, wall and ceiling profiles
Contraction joints
Profiles for high loads
Profiles for hygienic areas
2
MIGUTEC
MIGUTEC
MIGUA provides with MIGUTEC a comprehensive program of expansion joint profiles for movement joints.
MIGUTEC covers a wide range of expansion joint profiles for simple usage in connection with architectural requirements. MIGUTEC is subdivided to scope of application to make the search easier.
Our floor profiles are available with different inserts and in different standard colours. Special colours are available on request.Aluminium mounting brackets are made of a high quality alloy to ensure a high loadable expansion joint profile but with small wall thicknesses. In addition some of our profiles are available in stainless steel to be resistant to aggressive media.
Smooth inserts are designed for hygienic areas in hospitals, kitchens and swimming pool areas.
For refurbishment, renovation and modernization we provide profiles for finished surfaces.
Our wall and ceiling profiles are available with inserts, but also with metal covers and spring clips for easy installation.
The contraction joint profiles which we had shown in the MIGUTRANS catalogue is now included in MIGUTEC to give a logical arrangement of all contraction joints.
Information about load capacity
Symbol
Meaning pedestrians private cars lorries fork lift trucks solid plastic
DIN 1072 DIN 1055 tyres
Load capacities for fork lift trucks are based on pneumatic or rubber tyres with a contact surface of 200 x 200 mm.
InstallationApplication and installation instructions will be provided on request. Please contact us. As an alternative you can download it from our website www.migua.com
Expansion joint profiles for movement joints
3
MIGUTECMIGUTEC
Index to range of applications / alphabetic 4 - 5
Expansion joint systems for floors 6 - 20
Profiles resistant to aggressive media 21 - 24
Profiles for hygienic requirements 25 - 37
Profiles for refurbishment, renovation and modernization 38 - 44
Contraction joint systems 45 - 50
Connections, Installation instructions 51
Expansion joint systems for walls and ceilings 52 – 64
Floor-/Wall-Connections, Corner Versions 65
Transitions - Examples 66
Illustrations of applications 67
MIGUA – At a glance 70
Page
Content
Expansion joint profiles for movement joints
4
MIGUTEC
Product Page
FL 21 6 FLK 21 7 FLT 21 8FV 35 9FV 41 10FK 35 11FT 35 12FP 55 / FK 55 13FP 55-4S 14FP 55 MS-4S / 15 FP 55 NI-4S 15FP 65 16FP 65 NI / FP 65 MS 17FP 85 18FP 105 19FP 55 B (NI) 4S 20
Product Page
ES 20 21ES 33 22ES 39 23ES 60 24
Product Page
FLG 21 25 FPG 26 NI 26FG 35 27FG 41 28FPG 55 29 ESG 20 30ESG 33 31ESG 39 32ESG 60 33FNG 20 34FNG 35 35FNG 41 36FNG 50 37
Product Page
FN 20 38FKN 20 39FN 35, FN 41 40 FKN 35 / FTN 35 41FN 50 / FN 58 / 42 FN 65 / FN 85 42FKN 50 43FN 110 44
Floor profiles
Profiles resistant to aggressive media
Profiles with hygienic requirements
Profiles for refur- bishment, renovation and modernization
Perforated aluminium angles combined with a flexible high quality elastomeric insert. Inserts are available in different colours and types. Some of the inserts are optimized for connection to carpets or PVC flooring. A number of profiles are available with stainless steel or brass covers. This type of profile is frequently used for screed areas combined with tiles or other flooring like carpets or PVC.
Stainless steel mounting brackets made of various alloys (304 and 316), for different load capacities, combined with inserts for different movements ensures a high resistance to aggressive media. We are glad to check the suitability in your particular case, depending on the type and concentration of the media. Please ask for our technical advice.
Smooth inserts combined with a wide variety of mounting brackets made of aluminium or stainless steel. The smooth inserts have been specially designed for sterile hygienic areas such as hospitals, large kitchens or swimming pool areas. They are antibacterial and physiologicallysafe.
These profiles are designed forsurface fixing (sometimes referred to as “retro-fit or drop-in”).Inserts are made of flexible high quality elastomeric material. Inserts are available in different colours and types. Raised inserts for connecting to carpets or PVC flooring are also available.
Range of applications
Expansion joint profiles for movement joints
5
MIGUTEC
MIGUTEC
Product Page
FNG 20 34FNG 35 35FNG 41 36FNG 50 37
FP 55 / FK 55 13FP 55 B (NI) 4S 20FP 55 MS-4S / 15FP 55 NI-4S 15FP 55-4S 14FP 65 16FP 65 NI / FP 65 MS 17FP 85 18FP 105 19
FPG 26 NI 26FPG 55 29
FT 35 12
FV 35 9FV 41 10
KF 55 / KFE 55 59KF 250 / KFE 250 60
WP 255/22 58
Product Page
ESF 8 ES 45ESF 9 ZK 46ESF 22 47ESF 10 AL 48ESF 16 AL 49ESF 27 AL 50
Product Page
D 12 / DE 12 52 D 15 / DE 15 53D 20 / DE 20 54FA 25 / FAE 25 55FA 12 56DF 35 / DF 41 / 57 DF 50 / DF 58 57WP 255/22 58KF 55 / KFE 55 59KF 250 / KFE 250 60FB 20 62CP 50/25 63 FA 15 / FA 135 64
Product Page
CP 50/25 63
D 12 / DE 12 52D 15 / DE 15 53D 20 / DE 20 54
DF 35 / DF 41 / 57DF 50 / DF 58 57
ES 20 21ES 33 22ES 39 23ES 60 24
ESF 8 ES 45ESF 9 ZK 46ESF 10 AL 48ESF 16 AL 49ESF 22 47ESF 27 AL 50
ESG 20 30ESG 33 31ESG 39 32ESG 60 33
FA 12 56FA 15 / FA 135 64FA 25 / FAE 25 55
FB 20 62
FG 35 27FG 41 28
FK 35 11
FKN 20 39FKN 35 / FTN 35 41FKN 50 43
FL 21 6
FLG 21 25
FLK 21 7
FLT 21 8
FN 20 38FN 35, FN 41 40FN 50 / FN 58 / 42FN 65 / FN 85 42FN 110 44
Contraction joint systems
Wall and Ceiling Profiles
In order to relieve stresses infloor finishes and underlying screeds it is necessary to separate these materials on the vertical plane. MIGUA contraction joint systems, which are functional and aesthetically pleasing, can provide solutions.
MIGUA wall and ceiling profiles covers a wide range of profiles for applications with plaster, tiles, plasterboards, concrete, suspended ceilings and facades. These profiles consist of aluminium brackets with high quality elastomeric inserts.MIGUA also offers profiles with plastic or metal cover.
Index in alphabetic order
Expansion joint profiles for movement joints
6
MIGUTEC
bt
bs
b f max
h
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FL 21/20 20 5 (+3/-2) 21 80 20 30 -FL 21/35 20 5 (+3/-2) 21 107 35 30 -FL 21/50 20 5 (+3/-2) 21 107 50 30 -
Floor Profiles
FL 21
Flexible high quality elastomeric insertHard wearing, weather resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed or tiled floorings
MultiHole mounting bracketfor secure fixing
*not designed for permanent use.
For installation in asphalt, please ask for our technical advice.
Standard colours: black, greyProduction length: 4 m
Expansion joint profiles for movement joints
7
MIGUTEC
b t
b sh
b f max
3
MIGUTEC
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FLK 21/20 20 5 (+3/-2) 21 80 20 30 -FLK 21/35 20 5 (+3/-2) 21 107 35 30 -FLK 21/50 20 5 (+3/-2) 21 107 50 30 -
FLK 21
Flexible high quality elastomeric insert upstand 3 mmHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in floorings with PVC or linoleum coverings (insert with 3 mm upstand, weldable)
MultiHole mounting bracketfor secure fixing
*not designed for permanent use. For installation in asphalt, please ask for our technical advice.
Profiles of series FLK 21 are supplied with flush mounted distance insert of FL 21. The top edge of the aluminium profile can be used as a screeding guide. The distance insert protects the profile until covering is laid. This method avoids damage of profile caused by site traffic.
Standard colours: greyProduction length: 4 m
Floor Profiles for floors with PVC or linoleum
Expansion joint profiles for movement joints
8
MIGUTEC
5bt
bs
b f max
h
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FLT 21/20 20 5 (+3/-2) 21 80 20 30 -FLT 21/35 20 5 (+3/-2) 21 107 35 30 -FLT 21/50 20 5 (+3/-2) 21 107 50 30 -
FLT 21
Flexible high quality elastomeric insert upstand 5 mmHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in floors with carpet or rubber coverings (insert with 5 mm upstand)
MultiHole mounting bracketfor secure fixing
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Profiles of series FLT 21 are supplied with flush mounted distance insert of FL 21. The top edge of the aluminium profile can be used as a screeding guide. The distance insert protects the profile until covering is laid. This method avoids damage of profile caused by site traffic.
Standard colours: black, greyProduction length: 4 m
Floor Profiles for floors with carpets
Expansion joint profiles for movement joints
9
MIGUTEC
bt
bs
b f max
h
FV 35
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FV 35/15 30 10 (± 5) 35 108 15 30 -FV 35/20 30 10 (± 5) 35 108 20 30 -FV 35/25 30 10 (± 5) 35 108 25 30 -FV 35/35 30 10 (± 5) 35 125 35 30 -FV 35/50 30 10 (± 5) 35 125 50 30 -FV 35/4055 30 10 (± 5) 35 108 40, 45, 50, 55 30 -FV 35/6075 30 10 (± 5) 35 108 60, 65, 70, 75 30 -FV 35/7590 30 10 (± 5) 35 108 75, 80, 85, 90 30 -FV 35/90105 30 10 (± 5) 35 108 90, 95, 100, 105 30 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed ortiled floorings
MultiHole mounting bracketfor secure fixing
Flexible adaptation to site conditionsAvailable with adjustable installation height
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, brown, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
10
MIGUTEC
bt
bs
b f max
h
FV 41
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] FV 41/15 35 14 (± 7) 41 114 15 30 -FV 41/20 35 14 (± 7) 41 114 20 30 -FV 41/25 35 14 (± 7) 41 114 25 30 -FV 41/35 35 14 (± 7) 41 131 35 30 -FV 41/50 35 14 (± 7) 41 131 50 30 -FV 41/4055 35 14 (± 7) 41 114 40, 45, 50, 55 30 -FV 41/6075 35 14 (± 7) 41 114 60, 65, 70, 75 30 -FV 41/7590 35 14 (± 7) 41 114 75, 80, 85, 90 30 -FV 41/90105 35 14 (± 7) 41 114 90, 95, 100, 105 30 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed ortiled floorings
Flexible adaptation to site conditionsAvailable with adjustable installation height
MultiHole mounting bracketfor secure fixing
*not designed for permanent useFor installation in asphalt, please ask for our technical advise.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
11
MIGUTEC
3
bt
bs
b f max
h
FK 35
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FK 35/15 30 10 (± 5) 35 108 15 30 -FK 35/20 30 10 (± 5) 35 108 20 30 -FK 35/25 30 10 (± 5) 35 108 25 30 -FK 35/35 30 10 (± 5) 35 125 35 30 -FK 35/50 30 10 (± 5) 35 125 50 30 -FK 35/4055 30 10 (± 5) 35 108 40, 45, 50, 55 30 -FK 35/6075 30 10 (± 5) 35 108 60, 65, 70, 75 30 -FK 35/7590 30 10 (± 5) 35 108 75, 80, 85, 90 30 -FK 35/90105 30 10 (± 5) 35 108 90, 95, 100, 105 30 -
Flexible high quality elastomeric insert upstand 3 mmHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Quick and easy installationSolid, but light aluminium brackets for quick installation in floorings with PVC or linoleum coverings (insert with 3 mm upstand, weldable)
MultiHole mounting bracketfor secure fixing
Flexible adaptation to site conditionsAvailable with adjustable installation height
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Profiles of series FK 35 are supplied with flush mounted distance insert of FV 35. The top edge of the aluminium profile can be used as a screeding guide. The distance insert protects the profile until covering is laid. This method avoids damage of profile caused by site traffic.
Standard colours: black, grey, brown, beigeProduction length: 4 m
Floor Profiles for floors with PVC or linoleum
Expansion joint profiles for movement joints
12
MIGUTEC
5
bt
bs
b f max
h
FT 35
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] FT 35/15 30 10 (± 5) 35 108 15 30 -FT 35/20 30 10 (± 5) 35 108 20 30 -FT 35/25 30 10 (± 5) 35 108 25 30 -FT 35/35 30 10 (± 5) 35 125 35 30 -FT 35/50 30 10 (± 5) 35 125 50 30 -FT 35/4055 30 10 (± 5) 35 108 40, 45, 50, 55 30 -FT 35/6075 30 10 (± 5) 35 108 60, 65, 70, 75 30 -FT 35/7590 30 10 (± 5) 35 108 75, 80, 85, 90 30 -FT 35/90105 30 10 (± 5) 35 108 90, 95, 100, 105 30 -
Flexible high quality elastomeric insert upstand 5 mmHard wearing, temperature resistant (-30°C to +120°C), replaceable
Quick and easy installationSolid, but light aluminium brackets for quick installation in floorswith carpet or rubber coverings (insert with 5 mm upstand)
Multi directional movement
MultiHole mounting bracketfor secure fixing
Flexible adaptation to site conditionsAvailable with adjustable installation height
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Profiles of series FT 35 are supplied with flush mounted distance insert of FV 35. The top edge of the aluminium profile can be used as a screeding guide. The distance insert protects the profile until covering is laid. This method avoids damage of profile caused by site traffic.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles for floors with carpets
Expansion joint profiles for movement joints
13
MIGUTEC
bt
bs
b f max
h
FP 55 / FK 55
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 55/20 50 16 (± 8) 55 150 20 30 300 -FP 55/25 50 16 (± 8) 55 150 25 30 300 -FP 55/35 50 16 (± 8) 55 150 35 30 300 -FP 55/50 50 16 (± 8) 55 150 50 30 300 -FP 55/75 50 16 (± 8) 55 150 75 30 300 -
Flexible high quality elastomeric insert upstand 3 mmHard wearing, temperature resistant (-30°C to +120°C), replaceable
High load capacity due to sturdy constructionSolid aluminium brackets
Multi directional movement
MultiHole mounting bracketfor secure fixing
Quick and easy installationPositive connection of production lengths by means of connection pieces
*not designed for permanent useLarger installation heights on request. For installation in asphalt, please ask for our technical advice.
FP 55 profiles are also available with a 3 mm upstand of the insert as FK 55 profiles.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
14
MIGUTEC
bt
bs
b f max
h
FP 55 - 4S
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
High load capacity due to sturdy constructionSolid aluminium brackets Quick and easy installationPositive connection of production lengths by means of connection pieces
MultiHole mounting bracketfor secure fixing
*not designed for permanent useLarger installation heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 55/20-4S 58 22 (± 11) 63 158 20 30 300 -FP 55/25-4S 58 22 (± 11) 63 158 25 30 300 -FP 55/35-4S 58 22 (± 11) 63 158 35 30 300 -FP 55/50-4S 58 22 (± 11) 63 158 50 30 300 -FP 55/75-4S 58 22 (± 11) 63 158 75 30 300 -
15
MIGUTEC
bt
bs
b f max
h
FP 55 MS-4S / FP 55 NI-4S
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 55/21 MS / NI 50 16 (± 8) 57 150 21 30 300 -FP 55/26 MS / NI 50 16 (± 8) 57 150 26 30 300 -FP 55/36 MS / NI 50 16 (± 8) 57 150 36 30 300 -FP 55/51 MS / NI 50 16 (± 8) 57 150 51 30 300 -FP 55/76 MS / NI 50 16 (± 8) 57 150 76 30 300 -FP 55/21 MS / NI-4S 58 22 (± 11) 65 158 21 30 300 -FP 55/26 MS / NI-4S 58 22 (± 11) 65 158 26 30 300 -FP 55/36 MS / NI-4S 58 22 (± 11) 65 158 36 30 300 -FP 55/51 MS / NI-4S 58 22 (± 11) 65 158 51 30 300 -FP 55/76 MS / NI-4S 58 22 (± 11) 65 158 76 30 300 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Visible surface brass or stainless steel
High load capacity due to sturdy constructionSolid aluminium brackets
MultiHole mounting bracketfor secure fixing
Quick and easy installationPositive connection of production lengths by means of connection pieces
*not designed for permanent useLarger installation heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, greyProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
16
MIGUTEC
bt
bs
b f max
h
FP 65
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 65/20 55 22 (± 11) 65 205 20 30 300 -FP 65/30 55 22 (± 11) 65 205 30 30 300 -FP 65/50 55 22 (± 11) 65 205 50 30 300 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Insert and horizontal support plates replaceablewith series FP 85 and FP 105
Multi directional movement
High load capacity due to sturdy constructionSolid aluminium brackets
Quick and easy installation Positive connection of production lengths by means of connection pins
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
17
MIGUTEC
bt
bs
b f max
h
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 65/21 MS 55 22 (± 11) 67 205 21 30 300 -FP 65/21 NI 55 22 (± 11) 67 205 21 30 300 -FP 65/31 MS 55 22 (± 11) 67 205 31 30 300 -FP 65/31 NI 55 22 (± 11) 67 205 31 30 300 -FP 65/51 MS 55 22 (± 11) 67 205 51 30 300 -FP 65/51 NI 55 22 (± 11) 67 205 51 30 300 -
FP 65 NI / FP 65 MS
Visible surface brass or stainless steel
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
High load capacity due to sturdy constructionSolid aluminium brackets
MultiHole mounting bracketfor secure fixing
Quick and easy installation Positive connection of production lengths by means of connection pins
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, greyProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
18
MIGUTEC
bt
bs
b f max
h
FP 85
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 85/20 75 30 (± 15) 82 222 20 30 300 -FP 85/30 75 30 (± 15) 82 222 30 30 300 -FP 85/50 75 30 (± 15) 82 222 50 30 300 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Insert and horizontal support plates replaceablewith series FP 65 and FP 105
Multi directional movement
High load capacity due to sturdy constructionSolid aluminium brackets
Quick and easy installation Positive connection of production lengths by means of connection pins
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
19
MIGUTEC
bt
bs
b f max
h
FP 105
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FP 105/20 100 40 (± 20) 109 249 20 30 300 -FP 105/30 100 40 (± 20) 109 249 30 30 300 -FP 105/50 100 40 (± 20) 109 249 50 30 300 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Insert and horizontal support plates replaceablewith series FP 65 and FP 85
Multi directional movement
High load capacity due to sturdy constructionSolid aluminium brackets
Quick and easy installation Positive connection of production lengths by means of connection pins
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Floor Profiles
Expansion joint profiles for movement joints
20
MIGUTEC
b s
h
b f max
FP 55 B Ni 4S
bf max
h
bs
FP 55 B (NI) 4SFlexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Designed for where additional layers of concrete are being cast to strengthen existing slabsSlideable anchor rods for adjustable welding to the reinforcement
High load capacity due to sturdy constructionSolid aluminium brackets, also available with stainless steel covers
Quick and easy installation Positive connection of production lengths by means of connection pieces
Profile Joint width Total Visible width Installation Load capacity Load capacity* max. Movement of profile height bf max ∆bf bs h [mm] [mm] [mm] [mm] [kN] [kN] FP 55 B 4S 60 22 (± 11) 63 53 30 300FP 55 B NI 4S 60 22 (± 11) 63 54 30 300
*not designed for permanent use
Standard colours: black, greyProduction length: 4 m
Floor Profilesfor flush installation in concrete decks
Expansion joint profiles for movement joints
21
MIGUTEC
bt
bs
b f max
h
b s
h
b f max
FP 55 B Ni 4S
ES 20 Solid Stainless Steel
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
Multi directional movement MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ES 20/20 20 5 (+3/-2) 20 126 20 30 -ES 20/35 20 5 (+3/-2) 20 95 35 30 -ES 20/40 20 5 (+3/-2) 20 95 40 30 -ES 20/50 20 5 (+3/-2) 20 95 50 30 -
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, greyProduction length: 3 m, ES 20/20: 2 m
Profiles resistant to aggressive media
Expansion joint profiles for movement joints
22
MIGUTEC
bt
bs
b f max
h
ES 33 Solid Stainless Steel
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ES 33/15 30 10 (± 5) 33 139 15 30 -ES 33/35 30 10 (± 5) 33 108 35 30 -ES 33/40 30 10 (± 5) 33 108 40 30 - ES 33/50 30 10 (± 5) 33 108 50 30 -
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, grey, brown, beigeProduction length: 3 m, ES 33/15: 2 m
Profiles resistant to aggressive media
Expansion joint profiles for movement joints
23
MIGUTEC
bt
bs
b f max
h
ES 39 Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ES 39/15 35 14 (± 7) 39 145 15 30 -ES 39/35 35 14 (± 7) 39 114 35 30 -ES 39/40 35 14 (± 7) 39 114 40 30 -ES 39/50 35 14 (± 7) 39 114 50 30 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
MultiHole mounting bracketfor secure fixing
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, grey, beigeProduction length: 3 m, ES 39/15: 2 m
Profiles resistant to aggressive media
Expansion joint profiles for movement joints
24
MIGUTEC
bt
bs
b f max
h
ES 60 Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ES 60/19 40 16 (+10/-6) 60 160 19 90 35 -ES 60/35 50 16 (+10/-6) 60 152 35 90 35 -ES 60/45 50 16 (+10/-6) 60 152 45 90 35 -ES 60/55 50 16 (+10/-6) 60 152 55 90 35 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Multi directional movement
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
MultiHole mounting bracketfor secure fixing
High load capacitysuitable for Forklift trucks
*not designed for permanent useLarger heights on request.
Material: 1.4401 (alloy 316) Stainless steel: mill finishStandard colours: black, greyProduction length: 4 m
Profiles resistant to aggressive media
Expansion joint profiles for movement joints
25
MIGUTEC
bt
bs
b f max
h
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed or tiled floorings
MultiHole mounting bracketfor secure fixing
FLG 21
Profiles with hygienic requirements
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] FLG 21/20 20 2 (± 1) 21 107 20 30 -FLG 21/35 20 2 (± 1) 21 111 35 30 -FLG 21/50 20 2 (± 1) 21 111 50 30 -
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Standard colours: black, greyProduction length: 4m
Expansion joint profiles for movement joints
26
MIGUTEC
bt
bs
b f max
h
FPG 26 NI
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Visible surface stainless steel
High load capacity due to sturdy constructionSolid aluminium brackets
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] FPG 26 NI 20 2 (± 1) 27 128 35 300 70 5
For installation in asphalt, please ask for our technical advice.
Standard colours: black, greyProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
27
MIGUTEC
bt
bs
b f max
h
FG 35
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed or tiled floorings
MultiHole mounting bracketfor secure fixing
Flexible adaptation to site conditionsAvailable with adjustable installation height
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] FG 35/15 30 6 (± 3) 35 108 15 30 -FG 35/20 30 6 (± 3) 35 108 20 30 -FG 35/25 30 6 (± 3) 35 108 25 30 -FG 35/35 30 6 (± 3) 35 125 35 30 -FG 35/50 30 6 (± 3) 35 125 50 30 -FG 35/4055 30 6 (± 3) 35 108 40, 45, 50, 55 30 -FG 35/6075 30 6 (± 3) 35 108 60, 65, 70, 75 30 -FG 35/7590 30 6 (± 3) 35 108 75, 80, 85, 90 30 -FG 35/90105 30 6 (± 3) 35 108 90, 95, 100, 105 30 -
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, brown, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
28
MIGUTEC
bt
bs
b f max
h
FG 41
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Flexible adaptation to site conditionsAvailable with adjustable installation height
Quick and easy installationSolid, but light aluminium brackets for quick installation in screed or tiled floorings
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] FG 41/15 35 6 (± 3) 41 114 15 30 -FG 41/20 35 6 (± 3) 41 114 20 30 -FG 41/25 35 6 (± 3) 41 114 25 30 -FG 41/35 35 6 (± 3) 41 131 35 30 -FG 41/50 35 6 (± 3) 41 131 50 30 -FG 41/4055 35 6 (± 3) 41 114 40, 45, 50, 55 30 -FG 41/6075 35 6 (± 3) 41 114 60, 65, 70, 75 30 -FG 41/7590 35 6 (± 3) 41 114 75, 80, 85, 90 30 -FG 41/90105 35 6 (± 3) 41 114 90, 95, 100, 105 30 -
*not designed for permanent useFor installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
29
MIGUTEC
bt
bs
b f max
h
FPG 55
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kN] FPG 55/20 50 8 (± 4) 55 150 20 30 300 -FPG 55/25 50 8 (± 4) 55 150 25 30 300 -FPG 55/35 50 8 (± 4) 55 150 35 30 300 -FPG 55/50 50 8 (± 4) 55 150 50 30 300 -FPG 55/75 50 8 (± 4) 55 150 75 30 300 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
High load capacity due to sturdy constructionSolid aluminium brackets
MultiHole mounting bracketfor secure fixing
Quick and easy installationPositive connection of production lengths by means of connection pieces
*not designed for permanent use.Larger heights on request. For installation in asphalt, please ask for our technical advice.
Standard colours: black, grey, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
30
MIGUTEC
bt
bs
b f max
h
ESG 20 Solid Stainless Steel
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
Multi directional movement
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ESG 20/20 20 2 (± 1) 20 126 20 30 -ESG 20/35 20 2 (± 1) 20 95 35 30 -ESG 20/40 20 2 (± 1) 20 95 40 30 -ESG 20/50 20 2 (± 1) 20 95 50 30 -
*not designed for permanent useLarger heights on request.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, greyProduction length: 3 m, ES 20/20: 2 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
31
MIGUTEC
bt
bs
b f max
h
ESG 33 Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ESG 33/15 30 6 (± 3) 33 139 15 30 -ESG 33/35 30 6 (± 3) 33 108 35 30 -ESG 33/40 30 6 (± 3) 33 108 40 30 -ESG 33/50 30 6 (± 3) 33 108 50 30 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
Multi directional movement
MultiHole mounting bracketfor secure fixing
*not designed for permanent useLarger heights on request.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, grey, beige, brownProduction length: 3 m, ESG 33/15: 2 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
32
MIGUTEC
bt
bs
b f max
h
ESG 39 Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h / [mm] [mm] [mm] [mm] [mm] [kN] [kN] ESG 39/15 35 6 (± 3) 39 145 15 30 -ESG 39/35 35 6 (± 3) 39 114 35 30 -ESG 39/40 35 6 (± 3) 39 114 40 30 -ESG 39/50 35 6 (± 3) 39 114 50 30 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
Multi directional movement
MultiHole mounting bracketfor secure fixing
*not designed for permanent useLarger heights on request. For installation in asphalt, please ask for our technical advice.
Material: 1.4301 (alloy 304) Stainless steel: mill finishStandard colours: black, grey, beigeProduction length: 3 m, ESG 39/15: 2 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
33
MIGUTEC
bt
bs
b f max
h
ESG 60 Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ESG 60/19 40 8 (± 4) 60 160 19 90 35 -ESG 60/35 50 8 (± 4) 60 152 35 90 35 -ESG 60/45 50 8 (± 4) 60 152 45 90 35 -ESG 60/55 50 8 (± 4) 60 152 55 90 35 -
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Smooth visible surface for easy cleaning Antibacterial and physiologically safe
Solid stainless steel brackets Resistant to aggressive media (e.g. sea water)
High load capacitysuitable for Forklift trucks
MultiHole mounting bracketfor secure fixing
Multi directional movement
* not designed for permanent use
Material: 1.4401 (alloy 316) Stainless steel: mill finish Standard colours: greyProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
34
MIGUTEC
2
bt
bs
b f min
h
FNG 20
Profile Joint width Total Total width Installation height Thickness of visible Load capacity* min. Movement of profile min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] FNG 20 20 2 (± 1) 97 12 2 Pedestrians
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, greyProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
35
MIGUTEC
2
bt
bs
b f min
h
FNG 35
Profile Joint width Total Total width Installation height Thickness of visible Load capacity* min. Movement of profile min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] FNG 35 35 6 (± 3) 112 13 2 Pedestrians
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, grey, brown, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
36
MIGUTEC
2
bt
bs
b f min
h
FNG 41
Profile Joint width Total Total width Installation height Thickness of visible Load capacity* max. Movement of profile min. alu side plates bf max ∆bf bt h [mm] [mm] [mm] [mm] [mm] FNG 41 41 6 (± 3) 118 13 2 Pedestrians
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
Anti-slip-surface ensures good skid resistanceSpecial striated surface, also suitable for sports areas EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, grey, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
37
MIGUTEC
3
bt
bs
b f min
h
FNG 50
Profile Joint width Total Width of Total width Installation Thickness of visible Load capacity* min. Movement insert of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] FNG 50 50 8 (± 4) 43 170 16 3 Pedestrians
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
Anti-slip-surface ensures good skid resistanceSpecial striated surface, also suitable for sports areas
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, grey, beigeProduction length: 4 m
Profiles with hygienic requirements
Expansion joint profiles for movement joints
38
MIGUTEC
2
bt
bs
b f min
h
FN 20
Profile Joint width Total Total width Installation height Thickness of visible Load capacity* min. Movement of profile min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] FN 20 20 5 (+3/-2) 97 12 2 Pedestrians
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, greyProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
39
MIGUTEC
2 5
bt
bs
b f min
h
2 3
bt
bs
b f min
h
FKN 20 / FTN 20
Profile For PVC For carpet Joint width Total Total width Installation Thickness of visible Load capacity* floorings floorings min. Movement of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] [mm] FKN 20 3 – 20 5 (+3/-2) 17 12 2 Pedestrians FTN 20 – 5 20 5 (+3/-2) 17 12 2 Pedestrians
Perfectly designed insertFKN 20: 3 mm high upstand can be welded with PVC flooringsFTN 20: 5 mm high upstand in conjunction with carpets
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: FKN: grey, FTN 20: grey, blackProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
40
MIGUTEC
2
bt
bs
b f min
h
2
bt
bs
b f min
h
Profile Joint width Total Total width Installation Thickness of visible Load capacity* min. Movement of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] FN 35 35 10 (± 5) 112 13 2 PedestriansFN 41 41 14 (± 7) 118 13 2 Pedestrians
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
FN 35, FN 41
* Light vehicles on request.
Standard colours: FN 35: black, grey, beige, brown, FN 41: black, grey, beigeProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
41
MIGUTEC
2 3
bt
bs
b f min
h
2
5
bt
bs
b f min
h
Perfectly designed insertFKN 35: 3 mm high upstand can be welded with PVC flooringsFTN 35: 5 mm high upstand in conjunction with carpets
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
FKN 35 / FTN 35
Profile For PVC For carpet Joint width Total Total width Installation Thickness of visible Load capacity* floorings floorings min. Movement of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] [mm] FKN 35 3 – 35 10 (± 5) 30 13 2 PedestriansFTN 35 – 5 35 10 (± 5) 30 13 2 Pedestrians
* Light vehicles on request.
Standard colours: FKN 35: black, grey, brown, beige, FTN 35: black, grey, beigeProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
42
MIGUTEC
4
bt
bs
b f min
h
FN 50 / FN 58 / FN 65 / FN 85
Profile Joint width Total Width of Total width Installation Thickness of visible Load capacity* min. Movement Synca insert of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] FN 50 50 16 (± 8) 43 170 16 3 Pedestrians FN 58 60 22 (± 11) 52 178 16 3 PedestriansFN 65 80 22 (± 11) 52 224 18 4 PedestriansFN 85 100 30 (± 15) 70 242 18 4 Pedestrians
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: black, grey, beigeProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
43
MIGUTEC
3
bt
bs
b f min
h
Profile Joint width Total Width of Total width Installation Thickness of visible Load capacity* min. Movement Synca insert of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] FKN 50 50 16 (± 8) 43 170 16 3 Pedestrians
FKN 50
Perfectly designed insert3 mm high upstand can be welded with PVC floorings
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
*Light vehicles on request.
Standard colours: blackProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
44
MIGUTEC
6
bt
bs
b f min
h
FN 110
Profile Joint width Total Total width Visible width Installation Thickness of visible Load capacity min. Movement of profile of profile height min. alu side plates bf min ∆bf bt h [mm] [mm] [mm] [mm] [mm] [mm] [KN] FN 110 75 60 (± 30) 318 318 40 6,3 35
Anti-slip-surface ensures good skid resistanceSpecial Striated surface, also suitable for sports areas
Flexible MIGUFLEX insertSuitable for sound insulation
EconomicalInsert replaceable at any time
Very flat design Perfect for surface fixing
Installation instructions:Any unevenness in the surface to which the profile is being fixed must be remedied by using an epoxy adhesive e.g. Reckli-Adhesive EP. Thereafter the aluminium brackets must be fixed on both sides with countersunk stainless steel screws e.g. Multi Monti type MMS-7,5 ES or similar, at 200 mm intervals.
Standard colours: blackProduction length: 4 m
Profiles for refurbishment, renovation and modernization
Expansion joint profiles for movement joints
45
MIGUTEC
bt
bs
b f max
h
ESF 8 ES Solid Stainless Steel
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] ESF 8/30 ES 5 2 (± 1) 8 85 30 300 35ESF 8/35 ES 5 2 (± 1) 8 85 35 300 35ESF 8/40 ES 5 2 (± 1) 8 85 40 300 35ESF 8/50 ES 5 2 (± 1) 8 85 50 300 35
High load capacitySolid stainless steel brackets, suitable for fork lift trucks
Flexible (cellular rubber) insertSuitable for sound insulation
Small visible surfaceSlim design, visible width of profile 8 mm only
MultiHole mounting bracketfor secure fixing
*not designed for permanent useLarger heights on request.
Standard colours: grey Special colour: blackProduction length: 3 m
Contraction joint system
Expansion joint profiles for movement joints
46
MIGUTEC
bt
bs
b f max
h
ESF 9 ZK
High load capacitySolid aluminium brackets, suitable for fork lift trucks Flexible (cellular rubber) insertSuitable for sound insulation Small visible surfaceSlim design, visible width of profile 9 mm only
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity* Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] ESF 9/30 ZK 5 2 (± 1) 9 85 30 300 35ESF 9/40 ZK 5 2 (± 1) 9 85 40 300 35ESF 9/50 ZK 5 2 (± 1) 9 85 50 300 35
*not designed for permanent useLarger heights on request.
Standard colours: grey Special colour: blackProduction length: 3 m
Contraction joint systems
Expansion joint profiles for movement joints
47
MIGUTEC
bt
bs
b f max
h
ESF 22 NI
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ESF 22/18 NI 12 4 (± 2) 22 110 18 600 130 11ESF 22/30 NI 12 4 (± 2) 22 110 30 600 130 11ESF 22/45 NI 12 4 (± 2) 22 110 45 600 130 11ESF 22/60 NI 12 4 (± 2) 22 110 60 600 130 11
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Visible surface stainless steel
High load capacitySolid aluminium brackets, suitable for hard plastic tyres
MultiHole mounting bracketfor secure fixing
Standard colours: black, greyProduction length: 4 m
Contraction joint systems
Expansion joint profiles for movement joints
48
MIGUTEC
bt
bs
b f max
h
ESF 10 ALSolid all metal-profileHard wearing, maintenance-free, long lasting
High load capacitySolid aluminium brackets, suitable for hard plastic tyres
Small visible surfaceSlim design, visible width of profile 10 mm only
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ESF 10/15 AL 10 4 (± 2) 10 77 15 600 130 6,5ESF 10/17 AL 10 4 (± 2) 10 77 17 600 130 6,5ESF 10/25 AL 10 4 (± 2) 10 77 25 600 130 6,5ESF 10/35 AL 10 4 (± 2) 10 77 35 600 130 6,5ESF 10/40 AL 10 4 (± 2) 10 77 40 600 130 6,5ESF 10/50 AL 10 4 (± 2) 10 77 50 600 130 6,5ESF 10/60 AL 10 4 (± 2) 10 77 60 600 130 6,5
Larger heights on request.
Production length: 4 m
Contraction joint systems
Expansion joint profiles for movement joints
49
MIGUTEC
bt
bs
b f max
h
ESF 16 ALSolid all metal-profileHard wearing, maintenance-free, long lasting
Small visible surfaceSlim design, visible width of profile 17 mm only
High load capacitySolid aluminium brackets, suitable for hard plastic tyres
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ESF 16/35 AL 10 6 (± 3) 17 130 35 600 130 8ESF 16/45 AL 10 6 (± 3) 17 130 45 600 130 8ESF 16/60 AL 10 6 (± 3) 17 130 60 600 130 8
Larger heights on request.
Production length: 4 m
Contraction joint systems
Expansion joint profiles for movement joints
50
MIGUTEC
bt
bs
b f max
h
ESF 27 ALSmall visible surfaceSlim design, visible width of profile 27 mm only
Solid all metal-profileHard wearing, maintenance-free, long lasting
High load capacitySolid aluminium brackets, suitable for hard plastic tyres
MultiHole mounting bracketfor secure fixing
Profile Joint width Total Visible width Total width Installation Load capacity Load capacity Load capacity max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [kN] [kN] [kg/mm wheel width] ESF 27/30 AL 15 10 (± 5) 27 135 31 600 130 8ESF 27/35 AL 15 10 (± 5) 27 135 35 600 130 8ESF 27/40 AL 15 10 (± 5) 27 135 40 600 130 8ESF 27/55 AL 15 10 (± 5) 27 135 55 600 130 8
Larger heights on request.
Production length: 4 m
Contraction joint systems
Expansion joint profiles for movement joints
51
MIGUTEC
Additional intersection on request.
Profile connections Contraction joint systems
The positive connection of the individual profile lengths is obtained by use of slide-in connection pins (Series ESF 10/... and ESF 27/...) or by staggering in slide-in anchors in the individual aluminium profiles (Series ESF 16/...).
Slide-in connection pins e.g. ESF 27/40 AL Slide-in anchors e.g. ESF 16/45 AL
A joint filler strip must be placed between the aluminium mounting brackets. This joint filler is not included in our delivery.Series ESF 8, ESF 9, ESF 10 = 5 mm, Series ESF 22 = 12 mm, Series ESF 16 = 10 mm, Series ESF 27 = 15 mm joint filler.
The height of the joint filler will depend on the overall height required, but it must be sufficient to ensure that the screed is completely separated at the joint locations.
Before installing the profiles ensure that the mounting brackets are completely clean and grease/oil free. The perforated legs of the profile must be pressed into the first fresh layer of mortar or screed and levelled.
Thereafter apply more screed. Depending on the thicknessof the floor finish (measured from top edge of profile)the ESF profile must oversail the screed to suit.
Installations instructionsContraction joint systems
Expansion joint profiles for movement joints
52
MIGUTEC
bt
bs
b f max
h
D 12 / DE 12
Profile Joint Total Visible Total Install. Profile Joint Total Visible Total Install.for width movement width width height for width movement width width heightstraight max. of profile of profile corner max. of profile of profile joints bf max ∆bf bs bt h joints bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] D 12/ 3 30 10 (± 5) 32 110 12 DE 12/ 4 30 10 (± 5) 22 73 12D 12/ 5 75 40 (± 20) 75 155 12 DE 12/ 6 75 40 (± 20) 55 113 12D 12/ 7 100 50 (± 25) 100 180 12 DE 12/ 8 100 50 (± 25) 80 138 12D 12/ 9 150 100 (± 50) 150 230 12 DE 12/11 150 100 (± 50) 125 188 12D 12/13 200 120 (± 60) 200 280 12 DE 12/15 200 120 (± 60) 190 238 12D 12/14 250 180 (± 90) 250 330 12 DE 12/16 250 180 (± 90) 220 288 12D 12/18 350 200 (± 100) 350 430 12 DE 12/22 350 200 (± 100) 390 388 12
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Large movement capacity Special flexible folded insert (up to 50 m length)
MultiHole mounting bracketfor secure fixing
Standard colours: grey, D 12/3 and DE 12/4 can also be supplied with a beige insertProduction length: 4 m
Insert for profileD 12/5 and DE 12/6
Insert for profileD 12/7 and DE 12/8
Insert for profileD 12/9 and DE 12/11
Insert for profileD 12/13 and DE 12/15
Wall and ceiling profiles / plaster
Expansion joint profiles for movement joints
53
MIGUTEC
bt
bs
b f max
h
D 15 / DE 15
lexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Large movement capacity Special flexible folded insert (up to 50 m length)
MultiHole mounting bracketfor secure fixing
Double protection against waterDue to double sliding of the sealing insert within the metal profiles
Profile Joint Total Visible Total Install. Profile Joint Total Visible Total Install.for width movement width width height for width movement width width heightstraight max. of profile of profile corner max. of profile of profile joints bf max ∆bf bs bt h joints bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] D 15/ 3 30 10 (± 5) 32 110 15 DE 15/ 4 30 10 (± 5) 22 76 15D 15/ 5 75 40 (± 20) 75 155 15 DE 15/ 6 75 40 (± 20) 55 114 15D 15/ 7 100 50 (± 25) 100 180 15 DE 15/ 8 100 50 (± 25) 80 139 15D 15/ 9 150 100 (± 50) 150 230 15 DE 15/11 150 100 (± 50) 125 189 15D 15/13 200 120 (± 60) 200 280 15 DE 15/15 200 120 (± 60) 190 239 15D 15/14 250 180 (± 90) 250 330 15 DE 15/16 250 180 (± 90) 220 289 15D 15/18 350 200 (± 100) 350 430 15 DE 15/22 350 200 (± 100) 390 389 15
Standard colours: grey, D 15/3 and DE 15/4 can also be supplied with a beige insertProduction length: 4 m
Insert for profileD 15/5 and DE 15/6
Insert for profileD 15/7 and DE 15/8
Insert for profileD 15/9 and DE 15/11
Insert for profileD 15/13 and DE 15/15
Wall and ceiling profiles / plaster
Expansion joint profiles for movement joints
54
MIGUTEC
bt
bs
b f max
h
D 20 / DE 20
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Large movement capacity Special flexible folded insert (up to 50 m length)
MultiHole mounting bracketfor secure fixing
Double protection against waterDue to double sliding of the sealing insert within the metal profiles
Profile Joint Total Visible Total Install. Profile Joint Total Visible Total Install.for width movement width width height for width movement width width heightstraight max. of profile of profile corner max. of profile of profile joints bf max ∆bf bs bt h joints bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] D 20/ 3 30 10 (± 5) 40 111 20 DE 20/ 4 30 10 (± 5) 25 81 20D 20/ 5 75 40 (± 20) 75 160 20 DE 20/ 6 75 40 (± 20) 60 116 20D 20/ 7 100 50 (± 25) 100 180 20 DE 20/ 8 100 50 (± 25) 85 141 20D 20/ 9 150 100 (± 50) 150 230 20 DE 20/11 150 100 (± 50) 130 191 20D 20/13 200 120 (± 60) 200 280 20 DE 20/15 200 120 (± 60) 180 241 20D 20/14 250 180 (± 90) 250 330 20 DE 20/16 250 180 (± 90) 210 291 20D 20/18 350 200 (± 100) 350 430 20 DE 20/22 350 200 (± 100) 380 391 20
Standard colours: grey, D 20/3 and DE 20/4 can also be supplied with a beige insertProduction length: 4 m
Insert for profile D 20/5 and DE 20/6
Insert for profile D 20/7 and DE 20/8
Insert for profile D 20/9 and DE 20/11
Insert for profile D 20/13 and DE 20/15
Wall and ceiling profiles / plaster
Expansion joint profiles for movement joints
55
MIGUTEC
3
bt
b f min
h
3
bt
h 2
b f min
h
FA FAE
FA 25 / FAE 25
Profile FA for straight joints Joint width Total Total width Installation min. movement of profile heightProfile FAE for corner joints bf min ∆bf bt h [mm] [mm] [mm] [mm] FA 25/ 3 30 10 (± 5) 111 12FA 25/ 5 75 40 (± 20) 157 12FA 25/ 7 100 50 (± 25) 182 12FA 25/ 9 150 100 (± 50) 232 12FA 25/13 200 120 (± 60) 282 12FA 25/14 250 180 (± 90) 332 12FA 25/18 350 200 (± 100) 432 12FAE 25/ 4 30 10 (± 5) 69 12FAE 25/ 6 75 40 (± 20) 114 12FAE 25/ 8 100 50 (± 25) 139 12FAE 25/11 150 100 (± 50) 189 12FAE 25/15 200 120 (± 60) 239 12FAE 25/16 250 180 (± 90) 289 12FAE 25/22 350 200 (± 100) 389 12
Very flat design
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C), replaceable
Quick and easy installation Aluminium brackets with cellular rubber sealing strips to compensate for unevenness in the building surface
Double protection against water due to double sliding of the sealing insert within the metal profiles
Large movement capacity Special flexible folded insert for movement up to 200 mm
The profiles can also be supplied with holes for fixing with screws (distance 300 mm each).If longer lengths than 4 m are required, exact details of total joint lengths must be statedThe folded insert is then supplied in one piece up to approx. 50 m for the complete joint.
Standard colours: grey, FA 25/3 and FAE 25/4 can also be supplied with a beige insertProduction length: 4 m
Insert for profile FA 25/5 and FAE 25/6
Insert for profile FA 25/7 and FAE 25/8
Insert for profile FA 25/9 and FAE 25/11
Insert for profile FA 25/13 and FAE 25/15
Wall and ceiling profiles / Surface fixing
Expansion joint profiles for movement joints
56
MIGUTEC
bt
b f max
h
FA 12
Profile Joint width Total Total width Installation max. Movement of profile height bf max ∆bf bt h [mm] [mm] [mm] [mm] FA 12/ 5 75 40 (± 20) 132 12FA 12/ 7 100 50 (± 25) 157 12FA 12/ 9 150 100 (± 50) 207 12FA 12/13 200 120 (± 60) 257 12FA 12/14 250 180 (± 90) 307 12FA 12/18 350 200 (± 100) 407 12
Flexible high quality elastomeric insertHard wearing, temperature resistant (-30°C to +120°C)
Large movement capacity Special flexible folded insert for movement up to 200 mm
High flexibility of insertSuitable for straight and corner joints
Quick and easy installation Aluminium brackets with cellular rubber sealing strips to compensate for unevenness in the building surface
Insert for profile FA 12/5
Insert for profileFA 12/7
Insert for profileFA 12/9
Insert for profileFA 12/13
The profiles can also be supplied with countersunk holes for fixing with screws (distance 300 mm each).If longer lengths than 4 m are required, exact details of total joint lengths must be stated.The folded insert is then supplied in one piece up to approx. 50 m for the complete joint.
Standard colours: greyProduction length: 4 m
Wall and ceiling profiles / Surface fixing
Expansion joint profiles for movement joints
57
MIGUTEC
bt
bs
b f max
h
bt
bs
b f max
h
DF 35 / DF 41 / DF 50 / DF 58
Profile Joint width Total Visible width Total width Installation Intended application max. Movement of profile of profile height Load bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] DF 35 30 10 (± 5) 35 125 14 DF 41 30 14 (± 7) 41 131 14 DF 50 50 16 (± 8) 48 138 14 DF 58 58 22 (± 11) 56 146 14
Easy installation by means of nails or screws
Flexible high quality elastomeric insertHard wearing, weather resistant (-30°C to +120°C), replaceable
Same appearance of joints in floor and wall as the same type of insert is used for both applicationsby using inserts of series FV 35 (DF 35) resp. FP 55 (DF 50)
Solid all metal-profileHard wearing, maintenance-free, long lasting
Profiles are also available with smooth insertas DFG 35 (joint movement 6 mm ± 3 mm), DFG 41 (joint movement 6 mm ± 3 mm), DFG 50 (joint movement 8 mm ± 4 mm).
Standard colours: black, grey, beige, DF 35 also available in brownProduction length: 3 m
DF 35, DF 41, DF 58 DF 50
Wall and ceiling profiles / plasterboard
Expansion joint profiles for movement joints
for installation under sandwich type plasterboard of 12, 5 mm thickness
58
MIGUTEC
bt
b f max
h
Solid all metal-profileHard wearing, maintenance-free, long lasting
Large movement capacity Designed for movement up to 100 mm)
Quick and easy installation
WP 255/22
Profile Joint width Total Visible width Total width Installation max. Movement of profile of profile height bf max ∆bf bs bt h [mm] [mm] [mm] [mm] [mm] WP 255/22 110 100 (± 50) 255 255 22WP 255/22 E2 (corner version) 205 100 (± 50) 255 277 22
This profile is also available for other joint widths. Details on request.
Standard colours: Mill finishProduction length: 3 m
Wall and ceiling profiles
Expansion joint profiles for movement joints
59
MIGUTEC
bt
b f max
h
bt
b f max
h
KF 55 / KFE 55
Profile Joint width Total width of profile Depth of joint Standard bf max bt h min colour [mm] [mm] [mm] KF 55/1530 15-35 50 40 greyKF 55/3560 35-60 (15-35) 75 50 greyKFE 55/1531 20-35 47 40 grey KFE 55/3561 40-60 73 50 grey
Perfect optical appearance
Flexible high quality elastomeric insert Hard wearing, weather and temperature resistant (-30°C to +120°C)
Quick and easy installation Special types for corners joints available
Secure and permanent fixing using stainless steel spring clips 20 cm each
Continuous steel insert and stainless steel clips (5 spring clips will be supplied per running meter).Profiles of series KF 55/1530 and KFE 55/1531 will be normally supplied with the short standard clip K1.Profiles can also be supplied with longer clip K2 hmin = 75 mm), if desired (at extra charge).The profile KF 55/3560 can be supplied with the clips K1 or K2 of profile KF 55/1530 for joint width 15 - 35 mm on request.Exact details must be stated.
Production length: 20 m
Wall and ceiling profiles / Surface fixing
Expansion joint profiles for movement joints
60
MIGUTEC
bt
b f max
h
KF 250 / KFE 250
Profile Joint width Width of cover Depth of joint Material Standard colour bf max bt h min [mm] [mm] [mm] KF 250/ 30 15-35 50 40 Aluminium Mill finishKFE 250/ 31 15-35 40 40 Aluminium Mill finishKF 250/ 70* 15-35 70 40 Aluminium Mill finishKFE 250/ 71 15-35 50 40 Aluminium Mill finishKF 250/100* 15-35 100 40 Aluminium Mill finishKFE 250/101** 35-60 75 70 Aluminium Mill finishKF 250/150** 35-80 150 70 Aluminium Mill finishKF 250/170** 35-80 170 70 Aluminium Mill finish
*Special clips for joint width 35-80 mm (joint depth min. 70 mm) are available on request.**Profiles are only available with special clips.
4 spring clips will be supplied per length of 3 m for profiles KF 250/30 to KFE 250/71.6 spring clips are provided for profile KF 250/100 to KF 250/150 and 8 spring clips for profile KF 250/170.The aluminium profiles can be anodized or powder coated in our works for important orders.
Production length: 3 m
Aluminium cover profile with stainless steel spring clips very long durability
Secure and permanent fixing using special steel spring clips
Quick and easy installation
Wall and ceiling profiles
Expansion joint profiles for movement joints
KF 250/150 with special clip
61
MIGUTEC
bt
b f max
h
bt
b f max
h
bt
b f max
h
bt
b f max
h
bt
b f max
hbt
b f max
h
KF 250/100
KFE 250/31
KFE 250/101 with special clip
KFE 250/71
KF 250/30
KF 250/70
KF 250 Examples for installation
Expansion joint profiles for movement joints
62
MIGUTEC
bs
h 2
b f max
h
15 18 21 24
22 222018
30
28
40
30
50
60
38
48
FB 20
Profile Nominal Depth of Total Joint width joint min. movement bs h2 [mm] [mm] [mm] FB 20/1518 10 25 6FB 20/1820 12 25 6FB 20/2122 15 30 7FB 20/2422 18 30 7FB 20/3028 20 35 12FB 20/4030 28 45 14FB 20/5038 35 55 20FB 20/6048 45 65 20
High quality EPDM material Hard wearing, temperature resistant (-30°C to +120°C)
Easy installation, secure fixing and good watertightness by special design of the site barbs
High durability due to excellent permanent elasticity of EPDM material
Excellent sound and thermal insulationdue to special cellular design of the profiles
Standard colours: black, greyProduction length: 20 m
Wall and ceiling profiles
Expansion joint profiles for movement joints
FB 20/1518 FB 20/1820 FB 20/2122 FB 20/2422
FB 20/3028 FB 20/4030 FB 20/5038 FB 20/6048
63
MIGUTEC
bs
b t max
h
CP 50/25
Application for suspended ceilings Simple handling Perfect combination of rigid edges and flexible concertina-part
Easy application Light weight allows fast overhead installation
Profile Visible Total Total width Installation Joint width Movement of profile height bs ∆bf bt h [mm] [mm] [mm] [mm] CP 25/25 25 50 (± 25) 50 25CP 50/25 50 70 (± 35) 75 25
Visible width of profile depends on ceiling construction.
Standard colour: cream whiteProduction length: 4 m
Wall and ceiling profiles / suspended ceilings
Expansion joint profiles for movement joints
64
MIGUTEC
35
35
15
27
20
30
35
45
35
28
28
25
35
28
45
38
55
4538
36
28
Special profiles - Outside the standard program(not suitable for expansion joints)
FA 15/5538 Material: MIGUFLExJoint width: 25 mm
FA 15/3638 (for corner joints) Material: MIGUFLExJoint width: 25 mm
FA 135/20 Material: special PVCJoint width: 8 mm
FA 135/21 (for corner joints) Material: special PVCJoint width: 8 mm
FA 15/4535 Material: MIGUFLExJoint width: 20 mm
FA 135/35 Material: special PVCJoint width: 10 mm
FAE 15/3035 (for corner joints) Material: MIGUFLExJoint width: 20 mm
FA 15 / FA 135
Synca insertlong wearing, weather resistant, temperature resistant (-30°C to +120°C), extensively resistant to oils, acids and bitumen
Please always test the suitability by conducting a test installation. These profiles must be glued in the joint to perform. Further special profiles on request.
Standard colour: greyProduction length: 4 m
Expansion joint profiles for movement joints
65
MIGUTEC
FL 21, FV 35, FV 41 FP 55, FP 55 4S, FP 55 MS/NIFP 65, FP 85, FP 105
FN 20, FN 35, FN 41, FN 50, FN 58, FN 65, FN 85
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h Eb f max
b f max
bt
h E
b f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
E1 bf max
bt
15 bs
h
hE
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h E
b f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
E1 bf max
bt
bs
h
hE
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h E
b f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
E3 bf max
bt
bs
h hE
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h E
b f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
E3 bf max
bt
bs
h hE
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h E
b f min
bt
h E
b f min
hbt
bs
h Eb f max
h
h
bt
bs
h E
b f max
h
hh
bf max
bt
bs
h
hE
E4E4
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h E
b f min
bt
h Eb f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
bf max
bt
bs
h
hE
FN 65/20 E4
4 h 2
bt
b f min
h h
E4 bf min
bt
4 h2
E4
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h Eb f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
bf min
bt
hE
h
15
bt
bs
h E
b f max
h
bt
bs
h E
b f max
h
bt
bs
bt
bs
h E
h E
b f max
b f max
bt
h Eb f min
bt
h E
b f min
h
bt
bs
h E
b f max
h
h
bt
bs
h E
b f max
h
hh
E4 bf min
bt
hE
h
These corner-versions are also available for: FK, FKN, FT, FTN, FG, FNG and FPG 55
Exact Details for all corner version can be downloaded from our website www.migua.com
Floor/Wall Connections Corner Solutions
Expansion joint profiles for movement joints
66
MIGUTEC
7 8
5 6
3 4
1 2
Transitions Examples
Expansion joint profiles for movement joints
67
MIGUTEC Illustrations of applications
PH Charleroi, Belgium – FP 55
Goehte Galerie, Jena, Germany
68
MIGUTEC
Notes
Expansion joint profiles for movement joints
69
MIGUTEC
Notes
Expansion joint profiles for movement joints
70
MIGUTEC
MIGUA At a glance
MIGUA Headquarters in Wuelfrath
MIGUA. Market leader in Europe for more than 50 years.
MIGUA is completely focused on expansion joint systems. Leading
architects, designers and general contractors specify our products for
national and international projects. We will gladly provide you with
a list of references, on request. MIGUA expansion joint systems are
used from Abu Dhabi to Zurich providing protection, functionality
and architectural excellence on a permanent basis.
They are used in many different building types, e.g. shopping
malls, airports, exhibition halls, hospitals, industrial plants, storage
facilities, car parks and pedestrian bridges. It is our passion to
be innovative, to supply perfect quality and to develop solutions
according to customer requirements.
Technology. Innovative from experience.
Competence does not appear by chance. More than 10 million metres
of MIGUA movement joint systems have, over decades, been installed
worldwide to the satisfaction of architects, designers, builders and
owners. We are leaders in technological development in Europe as
witnessed by numerous patents and test certificates.
MIGUA engineers are, on an ongoing basis, designing and developing
new profiles with enhanced characteristics which lead to time and cost
saving installations. Through the use of special materials safety features
are improved and stringent performance tests are conducted on all
new products.
Quality. Made in Germany.
MIGUA products combine optimum solutions with excellence in
design, high quality materials and safety features which are supported
by our standard warranties. Quality makes the pre-condition for
product safety. That is why MIGUA develop and manufacture
in Germany. Only products on the highest standard achieve the
necessary durability and allow required warranties.
Due to this reason MIGUA is able to offer such warranties.
Beyond the technical quality of our products the main target of
the MIGUA quality management is the utmost satisfaction of our
customers. Each operation and work step is described and will be
recorded. From the first idea through research and development up
to successful market launch. Just this makes MIGUA successful.
LOAD CAPACITy FS 110
FATIGUE LOADING
SKID RESISTANCE
LOAD CAPACITy / WATERTIGHTNESS
71
MIGUTEC
MIGUA At a glance
Contact
Solutions. Which work.
By ensuring the technical quality of our products MIGUA can attain
its primary goal of complete customer satisfaction. We understand
the expectations of our customers, and how to exceed them.
This requires a strong commitment for special requests and solutions.
MIGUA is prepared for it – from the beginning. We are always
available for your questions or giving advice to find the solution our
customers need. Our products are supported by a national network
of technical experts, close cooperation with our world-wide partners
and an experienced international export team.
MIGUA offers the perfect solution for your project.
72
MIGUTEC FUGENSYSTEME
FUGENSySTEME GMBH & CO. KG
MIGUA offers a comprehensive product portfolio of expansion joint covers and systems with outstanding features.
Quality. Made in Germany.
Postal address: PO Box 1260 · 42479 WuelfrathHeadquarters: Dieselstr. 20 · 42489 Wuelfrath
Phone +49 2058 774-0 Fax +49 2058 774-48
[email protected] www.migua.com Subj
ect
to t
echn
ical
cha
nge.
11
/201
1 -
5000
GB
MIGUTRANS
Heavy duty expansion joint systems
MIGUTAN
Watertight expansion joint systems for traffic
MIGUPREN
Watertight expansion joint systems for roofs
MIGUMAX
Earthquake resistant expansion joint systems
MIGUTEC
Expansion joint profiles
Increasing architectural requirements as well as new construction materials and processes demand optimized expansion joint systems. For this reason, MIGUA is your experienced partner since we offer more than 600 different profiles for a wide range of applications.
Our product range covers 5 application orientated product groups as detailed below. In addition to standard profiles our R&D engineers provide highly sophisticated solutions for special or non-standard applications.
MIGUA provides solutions for extraordinary challenges.