LATINCAN 200915th Metal Packaging TechnologyExhibition and Seminar

March 25 - 27, 2009Hilton Cancun Golf & Spa ResortCancunMexico

LATINCANLatin American Association ofMetal Container Manufacturers and Fillers

SPONSORED BY

EXHIBITION HOURSWednesday 3:00 pm - 6:00 pmThursday 4:00 pm - 7:00 pm

EXHIBITORS 2009Alfons Haar

American International Tooling Anderson Vreeland

Anilox WorldwideApplied Vision Company

Ashworth BrothersBeckon Inc.

Billhoefer MaschinenfabrikCarnaudMetalbox Engineering

Canmaking NewsContainer Fabrication Machinery

CMC KuhnkeChemtool Inc.

Chromatic Technologies, Inc. (CTI)Clevertech Srl

Crabtree Of GatesheadDRT Manufacturing

EmbanewsFenton Global Resources Shanghai

FGWAGebruder Leonhardt Gmbh

Golden AluminumGolden Eagle Can Machinery

Grace Davison Materials & Packaging TechnologiesGraphic Studio Pro6

Greenbank Technology Ltd.Heattek

Henkel Corporation

Imeta Intercan GroupInternational Container SystemsInx International Ink Co.KBA MetalprintMaquinaria LacuevaMiltec UVOKL Can LinesOrbis CorporationPalmerTech ServicesPerm Machine & ToolRoeslein & AssociatesSchuler SystemsSedwall ManufacturingSencon Inc.Service Tool InternationalSFR (GB) Ltd.Soudronic MexicanaSprimag Sun ChemicalSuzhou SLAC PrecisionT.D. WrightThe Minster Machine CompanyUnimaqUTC OverseasVersatile TechnologyVMI Holland

Latincan North American Office1300 West Belmont Avenue

ChicagoIL 60657

USA

Contact: Alison PrioleauPhone: + 1 773 880-2420

Fax: + 1 773 880-2421Email: suppliers@latincan.org

Latincan Latin American OfficeTorre HOficina 2-2El ViñedoValenciaVenezuela

Contact: Raul MartinezPhone: + 58 241 825 3787Fax: + 58 241 825 6013Email: canmakers@latincan.org

Packaging News for Brazil and Latin America

Wednesday, March 25 Location Event

8:00 - 3:00 pm Golf course LatinCan Golf Tournament10:00 - 5:00 pm Lobby Registration / Check-in1:00 - 3:00 pm Exhibition Hall Table Top Set Up1:00 - 5:00 pm Conference rooms Presentation Rehearsals3:00 - 6:00 pm Exhibition Hall Exhibit Opening / Cocktails7:00 - 10:00 pm TBA Welcoming Dinner

Thursday, March 26 Location Event Speaker

7:00 - 8:30 am Spices Restaurant Breakfast

8:30 - 9:00 am Room 1 HENKEL CORPORATION Andrew Hatch, Research & Development Technical Director Solutions for Your Success.

9:00 - 9:30 am Room 1 QUAKER CHEMICAL Pierre Noltinck, Director Global Can Business What All Canmakers Need to know about Can Coolants.

Room 2 INX INTERNATIONAL INK CO Jack Knight, Senior International Technical Service Manager Digital Printing for Proofing and Production.

9:30 - 10:00 am Room 1 ASHWORTH BROTHERS Nick Botinelli, Account Manager – Latin America Conveyance Advances: washers , ovens, spirals, turn-curves.

Room 2 ANILOX WORLDWIDE Steve Harrop, President Upgrade Your Coater With Anilox.

10:00 - 10:30 am Room 1 PRESSCO TECHNOLOGY INC. Thomas Niemeyer, Sales Manager Latin America The Three Most Dangerous Trends in Canmaking.

Room 2 GRACE DAVISON MATERIALS & PACKAGING TECHNOLOGIES Cuauhtemoc Becerril, R&D Manager, Latin America New Developments in Can Coatings targeting the Latin American Market.

10:30 - 10:45 am Group Photo

10:45 - 11:00 am Coffee Break

11:00 - 11:30 am Room 1 OKL CANLINES George Shillcock OKL Bodymaker Innovations.

Room 2 KBA METALPRINT Derrick Straka, Sales Manager Cost Effective Metal Decorating Equipment.

11:30 am - 1:00 pm Room 1 FORUM: CAN LOGIC – THE TECHNOLOGIES BEHIND FORMING, CLEANING, TOOLING, AND DECORATING CANS

Roger Baker - Director, Capital Equipment Sales Belvac Production Machinery Roger Baker will talk about necking fundamentals and the effect of thick-wall variation on neck defects. He will also cover the effect of stroke length on die design, the advantages of full piloting in a die design and the factors in the necker that can cause neck problems.

Adrian Long - International Sales Manager Carnaud MetalBox Engineering Adrian Long will talk about Bodymaker fundamentals emphasizing the impact on the canmaking process and can size flexibility.

Dan Griffin, Director of Sales Chemtool Inc. Chris McKenzie will talk about the wet processes including cupper lube, coolant and washer chemistry. The emphasis will be on fundamentals of the lube system and how those fundamentals affect the washing process on aluminum cans

Jason Plowman - Sales Manager Heattek Jason Plowman will address how pin ovens and IBO’s get the can metal temperature up to the required 375 degrees F without damaging the can (over baking) or blowing them off the pin chain or knocking them over in the IBO. The emphasis will be on can stability control with engineered nozzles, and energy usage for old ovens vs. newer designs

1:00 - 2:30 pm Miramar room Lunch

2:30 - 4:00 pm Room 1 FORUM: INTERNATIONAL METAL DECORATORS ASSOCIATION (IMDA)

Introducing the International Metal Decorators Association. Jack Knight - Senior International Technical Service Manager, INX International Ink Company Secretary/Treasurer, IMDA Renee Etiopio - Corporate Marketing Manager, INX International Ink Co. Member, IMDA Jack and Renee talk about the history of the association and its mission and provides a preview of the annual convention to be held in May.

New and Innovative Technology to Measure Applied Can Coatings. Mark Novotny - Global Marketing Manager, Container Systems Nordson Corporation Member, IMDA Mark presents a non-contact, non-destructive method of accurately measuring coating film thickness on the interior and exterior of both two and three-piece cans, featuring optical sensory technology.

The Regulatory Battleground. Dr. William Hoyle - Hoyle Consulting Member, Board of Directors, IMDA Bill examines the regulatory issues currently facing the two and three-piece can industries as well as industry responses to educate government agencies, the news media, and consumers with the actual facts regarding these crucial challenges.

4:00 - 6:45 pm Cocktails / Exhibition

7:00 - 10:30 pm Outdoors Gala Dinner & Award Ceremony

Friday, March 27 Location Event Speaker

7:00 - 8:30 am Spices Restaurant Breakfast

8:30 - 9:00 am Room 1 ALFONS HAAR USA John Dunn, General Manager The New Alfons Haar Conversion System: the Production of Full Aperture Easy Open Ends.

9:00 - 9:30 am Room 1 CMC KUHNKE Alex Grossjohan, Managing Director Make Better Cans: Deliver useful information to decision makers through automated data collection and reports.

9:30 - 10:00 am Room 1 CHROMATIC TECHNOLOGIES John Davis, Vice President, Sales & Marketing The Hottest Thing in Inks: Temperature Sensitive Color-Changing Thermochromic Inks.

Room 2 AMERICAN INTERNATIONAL TOOLING John Konvicka, Vice President Sales Mandrels, Rolls, and Double Reduced Steel.

10:00 - 10:30 am Room 1 CARNAUD METALBOX ENGINEERING Daniel Egerton, Technical Manager Dual Stroke Bodymaker.

Room 2 INTERNATIONAL CONTAINER SUPPLY, LLC Roberto Amador, Director Operaciones Tinplate Oven Installations.

10:30 - 11:00 am Coffee Break

11:00 - 11:30 am Room 1 SCHULER SYSTEMS Markus Roever, Vice President Highspeed Cupping Systems.

11:30 - 12:00 pm Room 1 ORBIS CORPORATION Pat Huesing, Director Beverage Sales Driving Supply Chain Sustainability with Plastic Reusable Packaging.

12:00 - 1:00 pm Room 1 FORUM: CONTROLLING THE INSIDE SPRAY COATING PROCESS

Chair: Mark Novotny, Global Marketing Manager The Nordson Corporation

Matthias Allar, Senior Sales and Project Manager Sprimag AG

Robert Ruch, Global Technical Service Representative Akzo Nobel Packaging Coatings

1:00 - 2:30 pm Miramar room Lunch

END OF CONFERENCE