“Excellent, Easy to Use” - Jamestown · PDF fileBiaxial Cloth Tape ·...

Read hundreds of reviews like this online!

35 | Jamestowndistributors.com | 800.423.0030 | For boaters and their craft

MAS Low Viscosity Resin ·MAS is a single-system solution for all of your epoxy needs. The Low viscosity resin is an easy-flowing reliable system with low drip and no blush. Formulated with an easy 2:1 mix ratio. Use for barrier coatings, laminating, and bonding. MAS epoxy provides complete wet out of fiber reinforced fabrics, reducing the potential for voids and other imperfections. Modify with fillers such as wood powder of colloidal silica for filling and fairing compound applications. Formulated with an easy 2:1 mix ratio with MAS hardeners -- choose from Slow, Medium or Fast.

“Excellent, Easy to Use”

MAS Low Viscosity Epoxy Resin“I’m on my 3rd small boat, two strip built and one lap strake. This product is easy to use, has excellent technical resources, and very limited smell.”

Resins Item # Size Description MSRPLow Viscosity Resin MAS-30-001 1 qt The MAS workhorse epoxy. $39.51

MAS-30-005 0.5 gal Use for barrier coatings, laminating, $71.75MAS-30-002 1 gal and bonding. $117.51MAS-30-003 4 gal $474.23

VACUUM-PUMP-6000

Only $44999

Vacuum Bagging PumpA quiet source for vacuum pressure, this pump is often used for vacuum bagging. Applications include boat and board building, laminating, carbon fiber construction, fiberglassing, airplane construction, etc.

2 yds. Starting at $1416

Vacuum Bag Sealing TapeMastic tape vacuum bag sealant for airtight seals between vacuum bags and molds. Easy to work around difficult angles patching small leaks in the system. 1/2” wide x 25’ roll.

D312

Only $1399

Vacuum Bagging Breather FabricBreather Fabric is a lightweight polyester blanket that provides excellent air passage within the vacuum envelope while it absorbs excess epoxy. Fabric is 60 inches wide and available in 2 yards, 10 yards, or 100 yards.

2 yds. Starting at $1056

Vacuum Bagging Release FabricRelease Fabric, also known as Peel Ply is a tough, finely woven nylon fabric treated with a release agent. It is used to separate the absorber breather and vacuum bag from the laminate in vacuum bagging operations. Peels easily and leaves a smooth textured surface ready for bonding or finishing. Not recommended for post-cure temperatures over 120 F (49 C). Release Fabric comes 60 in. wide by 2 yards, 10 yards, or 100 yards.

Co

mp

os

ite

s

35 | Jamestowndistributors.com | 800.423.0030 | For boaters and their craft See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 36

Size (Thickness x W x L) Item # Price3/8" x 24" x 48" COM-29301 $29.491/2" x 24" x 48" COM-29303 $38.303/4" x 24" x 48" COM-29306 $46.51

Balsa Core - ProBalsaContourable, endgrain balsa wood. Coated with a thin resin film to enhance bond with epoxy, VE and polyester resin systems. 10 lb / cu ft typical density. Typical applications include hull and deck core replacement, construction of small parts and inexpensive straight core replacement.

StarBoardDeveloped to withstand sun, water and weather in harsh marine environments. Will not rot or discolor. Easy to work with using standard woodworking tools. Matte finish on both sides to hide scuffs and scratches. This material makes for easy cleaning and never needs refinishing. Do-it-yourself types will appreciate that Starboard is easy to fabricate and work using standard woodworking tools, and requires minimal finishing.

Color Dimensions Item # PriceBlack 24" x 54" x 1/4" KSB-2454BK14 $39.99Black 12" x 27" x 1/2" KSB-1227BK12 $33.99Black 24" x 27" x 1/2" KSB-2427BK12 $69.99Black 24" x 54" x 1/2" KSB-2454BK12 $80.57Black 24" x 27" x 3/4" KSB-2427BK34 $107.99Black 24" x 54" x 3/4" KSB-2454BK34 $117.99White 24" x 54" x 1/4" KSB-2454WW14 $39.99White 12" x 27" x 1/2" KSB-1227WW12 $33.99White 24" x 54" x 1/2" KSB-2454WW12 $96.99White 24" x 27" x 3/4" KSB-2427WW34 $107.99White 24" x 54" x 3/4" KSB-2454WW34 $117.99Seafoam 12" x 27" x 1/2" KSB-1227SF12 $44.19Seafoam 24" x 27" x 1/2" KSB-2427SF12 $69.99Seafoam 24" x 54" x 1/2" KSB-2454SF12 $82.99Seafoam 24" x 27" x 3/4" KSB-2427SF34 $107.99Seafoam 24" x 54" x 3/4" KSB-2454SF34 $107.99

Will not delaminate or discolor & easy to clean!

G10 Fiberglass BoardMade of a special glass epoxy laminate that has extremely high strength. G10 fiberglass is used in marine applications due to its superior strength, moisture resistance, and excellent electrical and fire insulation. Sold in 1/4” and 1/2” thickness.

Size (Thickness x W x L) Item # Price1/4" x 2’ x 3’ COM-G101423 $104.251/4" x 3’ x 4’ COM-553209 $185.511/2" x 2’ x 3’ COM-G101223 $209.251/2" x 3’ x 4’ COM-553210 $399.99

Huge Selection of Core Materials online

JD Tech Team:

Kevin Specializing in fiberglass, epoxy, paint, rigging & sailing{ 10 years in industry }

Speak to our advisors at 800-423-0030

Marine TeakThis is high quality Teak lumber imported from Asia. Color and grain pattern will vary--making your piece uniquely wonderful. Other sizes and lengths available upon request. Teak is a very durable hardwood with excellent split resistance. Often chosen for its beautiful olive-brown or yellow-brown color which will become more golden as time progresses.

Dimensions Item # Price1/2" x 1-3/4" x 6’ SAH-0526TK $31.991/2" x 1-3/4" x 8’ SAH-0528TK $49.581/2" x 3-1/2" x 6’ SAH-0546TK $63.211/2" x 3-1/2" x 8’ SAH-0548TK $84.281/2" x 5-1/2" x 6’ SAH-0566TK $89.221/2" x 5-1/2" x 8’ SAH-0568TK $119.993/4" x 1-3/4" x 6’ SAH-126TK $45.863/4" x 2-1/2" x 6’ SAH-136TK $63.213/4" x 3-1/2" x 6’ SAH-146TK $80.563/4" x 3-1/2" x 8’ SAH-148TK $135.013/4" x 5-1/2" x 6’ SAH-166TK $115.073/4" x 5-1/2" x 8’ SAH-168TK $153.44 Other sizes available - please inquire

Biaxial Cloth Tape·E-glass Biaxial (+/-45) Cloth tape with 3/4 oz mat backing. Held together by light stitching. Biaxial tape is ideal for repairs, tabbing, and reinforcing. 17oz weight.Available in 4” & 6” wide rolls.

Fiberglass Cloth Tape·Reinforcement for edges and corners. Avoid fraying when narrow strips are needed. Tapes saturate easily. 8.7 oz fabric. Plain weave. Available in 2”, 3”, 4”, 6”, 8” and 12” rolls.

Kimo and Mike fiberglassing cabin ribs in the JD workshop.


Kevlar Tape·Plain Kevlar weave, style 281 fabric. Excellent strength to weight ratio. Non Ballistic grade.Available in 1”, 2”, 3”, 4” and 6” rolls.

Carbon Fiber Tape·Carbon fiber unidirectional reinforcing tapes are used to improve tensile strength and stiffness in one direction with minimal weight. Sold in 1-1/2” or 3” width rolls.

Starting at $4599

Starting at $1426 /rollStarting at $679

/rollStarting at $2392

5.Fiberglass Biaxial Cloth·E-glass Biaxial (+/-45 degree) Cloth with 3/4 oz mat backing. 38” wide. Held together by light stitching. Print-thru and higher stiffness than woven fabrics. Ideal for repairs, tabbing, and reinforcing.Available in 38” and 50” wide rolls.

4.Fiberglass Cloth 4oz, 6oz, 10oz.·4oz This fabric is easy to handle & provides an excellent finish. Great for strip canoes & final layering.

·6oz Most popular surfacing fabric, durable & economical.

·10oz This heavy duty fabric is often used in molds, sandwich cores and high-strength layups.Available in 38” and 50” wide rolls.

6.Chopped Strand Mat·Mat can be used alone or in conjunction with fiberglass fabrics in larger fabrications. Polyester is the preferred resin for Chopped Strand. Available in 0.09oz, 0.75oz, 1.5oz and 2oz weights. 38” wide rolls.

2.Carbon Fiber 2x2 Twill Weave·This 2x2 Twill weave provides the cosmetic appearance desired for many modern composite parts. Twills are very pliable and have excellent drape while maintaining stability and strength.

3.Carbon Fiber 0-90 Plain Weave·This 12K Plain weave Carbon Fiber is commonly used by automobile manufacturers for their stock carbon fiber appearance. Plain weave is a one over one under pattern, yielding a checkerboard-like appearance.

1.Carbon Fiber Unidirectional Cloth·This lightweight, strong composite can be used with polyester or epoxy. Used in building America’s Cup boats, this great composite material can strengthen any project while adding minimal weight. 9oz weight is used in many applications including boat hulls & bicycles. 12K

Co

mp

os

ite

s

Kimo and Mike fiberglassing cabin ribs in the JD workshop.


4.

3.

2.

1.

5.

6.

7.

8.

9.

10.

7.Kevlar Cloth - Plain Weave·Plain Kevlar weave, style 281 fabric. Excellent strength to weight ratio. Not Ballistic grade.5oz. in either 38” or 50” wide rolls.

8.Kevlar Cloth - Twill Weave·Kevlar is a high tensile strength and high modulus composite fabric that is great for canoes, kayaks, & racing shells where maximum strength & minimal weight are critical. Impact tear and penetration resistance is far superior to fiberglass. Twill weave kevlar cloth drapes around corners & also wets out better than plain weave kevlar. 9 oz, 58” wide.

10.Carbon Kevlar Hybrid Cloth·A twill woven blend of carbon fiber strands with Aramid Kevlar strands. This 2x2 Twill weave is 7.0 oz/sq. yard. 3K. 50” wide rolls.

9.Dynel Fabric·A laminate fabric with great abrasion resistance used for museum-quality restoration work on wooden boats. It’s strong and yet supple like a true woven fabric, with no fibers to irritate your skin.5oz, 55” wide rolls.

See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 38

Yards starting at $705

Yards starting at $1553 Yards starting at $520



Yards starting at $1098Yards starting at $6511

Width Weight Item # Price/yd12" 9 oz (12k) RPA-TC09U12 $10.5324" 9 oz (12k) FIB-CAR0924 $29.2350" 9 oz (12K) RPA-TC09U50 $38.16

Width Weight Item # Price/yd50" 16.38 oz (6k) RPA-TC12T50 $90.7850" 5.8 oz (3k) FIB-960 $30.99

Width Weight Item # Price/yd50" 5.8 oz (3k) RPCAR57 $39.6060" 12.2oz (12k) RPA-TC12P60 $59.24

Starting at $1426 /roll

JD Tech Team:

Brian - Specializing in Teleflex, inboard/outboard engines, & marine engine parts

{ 9 years in industry }


3.5 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 40lbs/18kgMRC-1F03201HK

4 HP FourStroke·Full throttle RPM: 4500-5500·Dry weight: 57lbs/26kgMRC-1F04201HK


6 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 57lbs/26kgMRC-1FX6201HK

8 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 84lbs/38kgMRC-1F08211FK

9.9 HP FourStroke·Full throttle RPM: 5000-6000·Dry weight: 84lbs/38kgMRC-1F10201FK

9.9 HP Bigfoot FourStroke·Full throttle RPM: 5000-6000·Dry weight: 96lbs/44kgMRC-1F10352HK


Performance:Mercury FourStroke outboards feature large displacement for more torque and improved performance. That means quick planing and more fun for skiers and tubers - better fuel efficiency across the powerband - and top-end speed to spare.

Clean Power:All Mercury outboards are designed to run clean, helping to protect the environment for generations to come. From Verado, to FourStroke, to OptiMax, we offer more CARB Three-star Ultra-low Emissions outboards than any other manufacturer. So not only can you pass your Mercury outboards to the next generation, you’ll also be able to show them your favorite fishing spots.

Corrosion:Not all alloys are made equal. Aluminum alloys with less copper content are superior in resisting corrosion. Copper, a weaker metal, reacts with water and aluminum and sacrifices itself to protect the stronger aluminum metal. The more copper in an aluminum alloy, the more likely it will corrode.

Mercury Marine is the industry leader in producing its own aluminum alloys with very low copper content. No competitor alloy even comes close. Mercury’s aluminum alloys contain less than .20 percent copper, while the competition uses alloys with 10 to 20 times more copper content.

Call for current pricing


Travel 1003 Electric Outboard Motor·The Travel 1003 motors are the most robust, efficient electric outboards on the market. The 1003 has more horsepower, higher efficiency battery capacity, and an on-board-computer (including GPS and real-time range calculation). 3 HP output combined with lithium battery technology provides quiet, clean and low-maintenance power.

Compared to today’s modern 4-stroke outboards, electric motors are a more economical solution that is also better for the environment. Advantages include no oil changes, record efficiency, and usable on protected waters that ban traditional gasoline outboards. Available in a Short (23”) or Long (28”) shaft length.2-year Warranty

The Ultimate in Electric Outboards

Charge the battery while

underway with a foldable solar

panel. Sold separately.

Call for current price



Todd Gas Caddy - Portable Fuel Tank·This portable fuel system holds up to 28 Gallons of fuel, and can be rolled over land and then along a dock to your boat or Jet Ski. The Gas Caddy is easily moved on pneumatic tires which have nylon bearings preventing sparks between bearings and the aluminum axle. Handle grips and proper design proportions ensure comfortable, easy balance and maneuverability when full.The Gas Caddy features a vented cap and a 10’ long, large diameter U.L. Listed supply hose that facilitates rapid fuel transfer. The hose is easily coiled on two brackets and neatly held in place while transporting.

Easy to assemble

TOD-P932400 $37999

Starting at $9499

Moeller Fluid Extractor Pumps·Moeller fluid extractors are pumps that move hot or cold oil faster with less effort. Newly redesigned and available in 2 sizes (5 and 7 liter capacity), they use a dual action vacuum pump that creates vacuum with both the upstroke & downstroke. Comes with 3 extraction tubes and a tethered cap.

Moeller Fluid Extractor Pumps

“After evaluating reviews for virtually every

competing product (electric pumps, many

competitors, etc.) I settled on the ‘Newly

Designed’ Moeller because of it’s double-action

pump (up/dn 14x), compact profile, and non-gimmicky design. It does what it does extremely well. So far I have not found any negatives, it is such a pleasure to just get the job done, done well, & quickly (a few minutes for the 6-qt oil).

It has quite strong suction! “

“Excellent”

Starting at $19999

Racor Fuel Filters·Racor is the Industry Leader in Fuel Filtration Systems. We are proud to carry the entire Racor line for your marine engine. Call or visit us online.

Racor Turbine Series Diesel Fuel Filters·Racor Turbine Series Diesel Fuel Filters provide heavy duty, high capacity water separation and fuel filtration for marine service. Made of rugged, non-corrosive die-cast aluminum with a glass bowl designed for diesel fuel only.

Filters Starting as low as $1369

We now carry the entire Racor Line

Biobor JF·Biobor JF eliminates growth of harmful slime-producing fungi that clog filters & pipelines, attack rubber fuel system components & whose waste products aid in the corrosion of metal surfaces.8 oz. Only $16.97

BIO-JD -- 16 oz.

16oz. Only $1999

Sherwood Impellers·Sherwood impellers fit a variety of pumps in marine applications, including marine engine water pumps & bilge pumps. It is common practice to replace flexible impellers annually as preventative maintenance. Spare water pump impellers for the engine coolant system should be kept on board.

Starting at $2999

Easy squeeze - Exact measure

StarTron Gasoline Engine Fuel Treatment·Reduces emissions, prevents fuel oxidation, & stabilizes fuel chemistry for at least 1 year. Gasoline formula eliminates carbon build-up in fuel delivery system & exhaust components to increase fuel economy up to 15%.8oz. - $8.99

STA-93032 -- 32 oz.

32oz. Only $1999


Teleflex Seastar I & II Helm Pumps·Teleflex Seastar helm pumps are the perfect replacement for your boat’s worn out hydraulic steering. These pumps are easy to install, and fit most 3 inch dash holes for a clean, factory look.

Teleflex QCII Steering Cables·Teleflex QC II Replacement Steering Cable Assemblies are a direct Replacement for Teleflex SSC62 and SSC72 and fit most Teleflex rotary helms made after 1968. The QC II features the patented Quick Connect cable hook-ups. These cables can be used on boats with inboards, outboards & stern drives, with single or twin motors. Kit comes with converter to change threaded-spigot helms into quick-connect helms.

Teleflex Seastar Hydraulic Oil·Seastar hydraulic oil is for use in all Seastar Hydraulic steering systems, and meets Military Spec. H-5606 G. This high quality fluid is the required steering fluid for Seastar Steering systems under warranty.

Size Item # PriceQuart TEL-HA5430 $23.99Gallon TEL-HA5440 $83.00

Starting at $5099

Starting at $9499

Teleflex Hydraulic Seal Kit For Outboard Cylinders·Replacement hydraulic seal kit for Seastar front mount hydraulic steering cylinders on outboard motors. Kit fits most outboard boats with single or twin engines. Seal kit HS5157 comes with 2 seal glands, pin wrench and guide tool.TEL-HS5152 $50.99TEL-HS5153 $50.99TEL-HS5157 (shown) $114.99TEL-HS5167 $97.99

Customer photo from Jim Henry. Tipping a MAS flow coat on the striper sniper.

Starting at $34499

En

gin

e

See our full selection online, over 70,000 products | 800.423.0030 | Jamestowndistributors.com | 42

FREE Shipping

on our Mobile SiteUse your Smartphone with our

Mobile website to get Free Shipping on your next order over $50!

Only valid via Ground Shipping in the Continental US. Some product exclusions

apply. See website for details. Limited time offer.


Jamestown Tech SupportWhen you shop at Jamestown you’re not just buying products -- you get

Technical Support that you will not find anywhere else. Our team has years of hands on training, experience and a passion to help you.

Call our Tech Hotline at 401-253-3840 or [email protected]

Dave Specializing in paints/varnish & fasteners{ 37 years in industry }

Kevin Specializing in fiberglass, paint, rigging & sailing{ 10 years in industry }

Ryan Specializing in paints & varnishes{ 5 yearS in inDuSTry }

Peter Specializing in wooden boat repairs, paints, screws & glues{ 40 years in industry }

Brian Specializing in Teleflex, inboard/outboard engines, & marine engine parts{ 9 years in industry }

Jack Specializing in electronics & marine systems{ 30 years in industry }

Kerry Specializing in paints{ 3 years in industry }

Matt Specializing in sailboat hard-ware & paint systems. { 10 years in industry }

FREE Shipping

on our Mobile Site


En

gin

e

Starting at $7499

Edson Pro-Series PowerKnobs ·Pro-Series Knobs are available in highly polished Stainless, Silver, Teak and Black or Gold Plated Stainless. They can be mounted to nearly any wheel by using either a simple, clamp-on design that minimizes installation time or by bolting directly onto solid-rimmed wheels with an included stainless bolt.

Edson Pro-Series PowerKnobs

“This Power Knob is a very high quality item and it’s easy to install. It think it’s the best accessory I have for my boat. It really improves my ability to handle the boat, especially in tight spaces. I would not be without it now. Highly recommended.“

“Excellent!”

VET-BOW3512B $1,689

Starting at $3,52556VET-BPJE2 $29904

Vetus Joystick Control Panel ·The Vetus BPJE Control Panel commands electric Vetus bow thruster models with an easy joystick control.

Additional thrusters & accessories available online

EDS-969ST-18CG $7999

Vetus Bow 35 Electric Bow Thruster ·The Vetus 35 electric bow thruster improves lateral maneuverability of boats with sideways thrust power of 77 pound-force (lbf)/ 35 kgf. Install them below the waterline in the bow of the hull for advanced maneuverability in tight spaces. When traditional line handling is not a possibility, such as a short-handed crew, thrusters provide immeasurable peace of mind during stressful maneuvering around the dock.

Edson ComfortGrip PowerKnob ·The ergonomic ComfortGrip Power Knob features a rubber grip insert to provide exceptional finger-tip control of your boat. Grip insert is made of rugged Santoprene rubber that resists sunlight, saltwater, oils, and perspiration for a secure, non-slip grip.

Vetus Bow 95 Electric Bow Thrusters ·The Vetus 95 electric bow thruster improves lateral maneuverability of boats with sideways thrust power of 210 pound-force (lbf)/ 95 kgf. Install thrusters below the waterline in the bow of the hull for advanced maneuverability in tight spaces. When traditional line handling is not a possibility, such as a short-handed crew, thrusters provide immeasurable peace of mind during stressful maneuvering around the dock.


Shimano Baitrunner D Spinning ReelsShimano’s newly redesigned Baitrunner“D” series includes improvements in the oversized and super ergonomic Septon handle and the addition of the S concept design that provides smooth, silent, and strong operation, with a water resistant Dartanium II drag system that can handle serious abuse from big fish.

(#test/yd) Drag (lb) Ratio Item # Price8/240 10/200 12/160 15.0 4.8:1 SHM-BTR4000D $159.9910/300 12/265 16/170 20.0 4.8:1 SHM-BTR6000D $169.9914/295 17/250 20/195 20.0 4.8:1 SHM-BTR8000D $179.99

Line Capacity Full Max Gear

Testimonial: “With this baitrunner feature you can put your rod in the holder and not worry about losing the fish.”

Penn Level Wind Conventional ReelsThe classic Penn Level Winds are straight-forward, fully functional, and durable reels that are extremely capable of meeting every anglers expectations.

This is a rock-steady reel that will not let you down.

(lb/yds) Drag (lb) Ratio Item # Price15/250 17/220 20/180 10 3.4:1 PNN-9M $54.9917/360 20/290 30/190 10 3.2:1 PNN-209M $59.9917/360 20/290 30/190 10 3.2:1 PNN-209MLH $59.99

Mono Capacity Full Max Gear

PowerPro Braided Fishing LineThe PowerPro Braided Fishing Line is made with 100% Spectra Fiber. Spectra is a white polyethylene 15 times stronger than steel, yet remains super-thin.

Starting at $1699

Penn Torque Spinning ReelsThese rugged Torque Spinning Reels are highly recommended for heavy saltwater fishing. This reel comes in three different sizes and can match up to any size fish looking for a fight. Torque reels are outfitted in all aluminum, and feature an integral clutch sleeve to eliminate any back play of the rotor.

(yds/lbs) Drag (lb) Ratio Item # Price340/12, 300/15, 210/20 38 5.9:1 PNN-TRQS5-G $652.41340/12, 300/15, 210/20 38 5.9:1 PNN-TRQS5-B $589.99340/12, 300/15, 210/20 38 5.9:1 PNN-TRQS5-BBLS $519.99490/15, 340/20, 300/25 41 5.1:1 PNN-TRQS7-G $682.11490/15, 340/20, 300/25 41 5.1:1 PNN-TRQS7-B $564.59490/15, 340/20, 300/25 41 5.1:1 PNN-TRQS7-BBLS $539.99490/20, 440/25, 330/30 50 5.1:1 PNN-TRQS9-G $711.81490/20, 440/25, 330/30 50 5.1:1 PNN-TRQS9-B $581.27490/20, 440/25, 330/30 50 5.1:1 PNN-TRQS9-BBLS $581.27

Mono Cap Full Max Gear


Length Reel Rod Item # Price7 ft SG3000 SL612S70 PNN-93067 $109.997 ft SG4000 SL1020S70F PNN-94070 $109.997 ft SG5000 SL1220S70F PNN-95072 $119.997 ft SG6000 SL1220S70F PNN-94073 $119.997 ft SG7000 SL1530S70F PNN-97007 $124.99

Penn Sargus Spinning Rod & Reel CombosThese combos consist of the Penn Slammer rod and Sargus spinning reel. They are noted for their added strength and ultra-sensitive blanks.

Stainless Steel Flush Mount Rod HoldersThese stainless steel rod holders are available in three angles: straight, 15, & 30 degrees. Top flanges are crowned & each holder features a full length white vinyl insert in the tube. All rod holders are drilled & countersunk for 1/4” bolts. The flange measures 3-3/8” x 4-3/16” on the medium and 4” x 5” on the large.

Tube Length (in) Size Item # Price8-5/8 Medium Vertical LEE-RH527VS $89.998-1/2 Medium 15 degree LEE-RH529HS $89.998 Medium 30 degree LEE-RH525SS $74.9910-5/8 Large Vertical LEE-RH532VS $81.9910-3/8 Large 15 degree LEE-RH534HS $89.9910 Large 30 degree LEE-RH530SS $89.99

Penn Battle Spinning ReelsPenn Battle reels have full metal bodies and sideplates to keep precise gear alignment under heavy loads. Techno-balanced rotors ensure smooth retrieves. HT-100 drag washers have a wide adjustment range and provide smooth drag even under heavy loads.

(yds/lbs) Drag (lb) Ratio Item # Price260/4, 210/6, 140/8 7 6.2:1 PNN-BTL2000 $87.99250/6, 170/8, 140/10 30 6.2:1 PNN-BTL3000 $85.99280/8, 230/10, 170/12 13 6.2:1 PNN-BTL4000 $89.99250/12, 220/15, 190/17 20 5.6:1 PNN-BTL5000 $94.99320/15, 280/17, 220/20 20 5.6:1 PNN-BTL6000 $94.99390/17, 310/20, 280/25 25 5.3:1 PNN-BTL7000 $102.99390/20, 350/25, 260/30 25 5.3:1 PNN-BTL8000 $109.99

Mono Cap Full Max Gear

Casting for Pacific Salmon in Russia’s remote Kamchatka Peninsula. Photo Onne van der Wal

Penn Senator Rod & Reel CombosThe Penn Senator reel, a long-time favorite amongst avid sportfisherman, is coupled with Penn’s Slammer fishing rod to create a durable, conventional setup capable of handling large bottom fish as well as offshore species. Slammer’s tubular graphite composite blank is outfitted with a Penn Senator reel which has a lightweight graphite frame, and a high-strength marine grade bronze alloy gear.

Starting at $11999

Dock & Anchor Line - 3 StrandThese lines are made from premium three strand nylon. They offer incredible durability, excellent handling and long life. Treated with a water repellent for the ultimate resistance against abrasion. Sold in increments of 100’ lengths.Ranging from 3/16” to 3/4” diameters.


Windline Over-Platform Drop LadderThe Windline over platform drop ladder is made of thick-wall stainless steel tubing and is electropolished to prevent corrosion. Available in 2, 3 or 4 step, the ladder folds flat over onto the platform to save space by providing compact storage. 2-step measures 23-1/3” x 12”. 3-step measures 34”x12”. 4-step measures 44”x13”.

Size Item # Price2 step WIN-TDL2X $89.993 step WIN-TDL3X $96.994 step WIN-TDL4X $166.99

Windline Sport/Diver Boarding Ladder“Was looking for a sturdy removable ladder and this product is nearly perfect! Climbing up is like climbing stairs! Well built, comes with storage clips, and it floats! Probably the only thing I would change in it’s design would be to add a recessed loop at the top to attach a tether, and make the bottom cap a bright color so that you can see it floating since it floats upside down! Both of these are minor things, and are easily rectified.“

“Great Product!”

Size Item # Price3 step WIN-DL3X $139.994 step WIN-DL4X $149.99

Windline Sport/Diver Boarding LadderWindline Sport/Diver Boarding Ladders are heavy duty, with a load capacity rated to 400 lbs. Constructed of high quality, 1-1/2 inch thick walled stainless steel tubing that has been electropolished for superior corrosion resistance. Ladders include mounting bracket with secure locking faspin and quick release for easy stowage.

Lewmar Delta AnchorsLewmar Delta anchors in six weights, ranging from 9 to 55 lbs. Delta series boat anchors are made of high grade manganese steel for maximum tensile strength. Lewmar’s patented shank profile and ballasted tip mean these anchors are self launching. Due to their low center of gravity and self righting design, they set immediately without dragging or sliding along the bottom.

Starting at $8189

Starting at $9598

Danforth Anchor KitThis kit includes either an 8- or 13-pound Danforth Anchor. Kit includes an anchor, 6-feet of 1/4” galvanized chain, 100-feet of 3/8” Nylon Anchor line with thimble and two 5/16” shackles. Danforth anchors provide the traditional holding power you’ve come to expect. The shank is made of high strength steel, and steel flukes are strong and wide for a better bite into the ocean floor. Each anchor has a hot dipped galvanized coating for long lasting protection.

Starting at 19¢/foot

Robship Hook & Moor Boat HookEngineered to make threading a mooring line easy and efficient. Simply push or pull the hook onto the mooring ring - eliminating the need for messenger, loading, or guide lines. It can be used as a standard boathook in the locked position. Designed to Float.

From $11499

New

video online

Easily thread a mooring Rope through a Ring

Type Dia Item# Roll Length Roll Price3/4 Round 1-1/4" TAY-GG1.253Q.50 50' $317.993/4 Round 1-1/2" TAY-GG1.53Q.50 50' $329.99

Tessilmare RADIAL Flexible Rub RailTessilmare rub rail kits are easy to install & available in various lengths & styles to suit any taste. They can be fitted cold & offer a seamless, finished look.

Gunwale GuardsFor use on boats, docks, platforms, anywhere protection is needed. The hard sponge-rubber core is covered in heavy woven Dacron. White and stain resistant, it will not mar and is suitable for dock facings, trailers, swim ladders and platforms.

Tessilmare Sphaera Rub Rail KitsSphaera is the revolutionary line of fender profiles made of stainless steel and co-extruded with rigid and shockproof vinyl chloride. Installation is greatly simplified and quick compared to traditional rub rails. The highly conformable rigid vinyl base allows cold shaping to the hull without heat.Also available in 70-ft lengths.

Cal-June Pendant Mooring BuoysCal-June Pendant Mooring Buoys are designed with a recessed top to keep your mooring line dry and accessible. The high density polyethylene buoy shell protects your boat topsides from contact with the mooring hardware.

Starting at $13999

An

ch

or

ing

& Do

ck

ing


Maximum Line Orange White Dia Circum\ference Buoyancy Hole Item # Item # Price9” 28” 14 lb 1-1/16” n/a TAY-1140 $34.9912” 38” 33 lb 1-1/16” TAY-61143 TAY-1143 $41.9915” 47” 65 lb 1-1/2” TAY-61146 TAY-1146 $49.9918” 57” 112 lb 1-1/2” TAY-61149 TAY-1149 $65.9921” 66” 180 lb 1-1/2” TAY-61152 TAY-1152 $101.9927” 85” 375 lb 1-1/2” TAY-61155 TAY-1155 $154.99

Taylor Made - Tuff End Inflatable Vinyl BuoysThese buoys are resistant to oil and chemicals, function equally well in tropical heat or arctic cold. Not inflated. Valve located on the side for easy inflation with football needle or compressor. Available in Orange or White.

Starting at $18499

Starting at $69999

“Great Product”

Size White Item # Price6" x 15" TAY-1025 $48.998" x 20" TAY-1026 $71.9910" x 26" TAY-1032 $108.9912” x 34” TAY-1034 $130.99

Fleece Fender Boots Starting at $31.99

Taylor Made Big B Inflatable CRT Vinyl FendersBig B fender incorporate a Center Rope Tube that allows end-to-end line passage. It can be hung vertically or horizontally with a single line. Horizontal hanging is useful protection against pilings, awkward docking situations, & tidal change areas. Available in White, Blue, Black, Navy, Sand, Hunter Green & Cranberry.

New

Tessilmare RADIAL Flexible Rub RailWe recently installed the flexible rub rail kit on our houseboat. It was very easy to install and very flexible. It really made a big difference in the way the boat looks.

video online

Double Braid Mooring PennantsNovagold

·Novagold Nylon Double Braid Mooring Pennants are extremely durable. Professionally hand-spliced eye, heavy duty galvanized thimble, and a movable anti-chafe sleeve. All pennants are finished with a hand dipped special urethane coating to prevent marine growth and to increase abrasion resistance. Double pendants consist of (2) standard single pennants connected by a galvanized sling link at the base.

Length Diameter Item # Price12 ft. 1/2 in. RWE-DBMP12X12 $77.9915 ft. 1/2 in. RWE-DBMP12X15DOUBLE $182.9912 ft. 1/2 in. RWE-DBMP12X12DOUBLE $182.9915 ft. 1/2 in. RWE-DBMP12X15 $79.9912 ft. 5/8 in. RWE-DBMP58X12DOUBLE $243.9912 ft. 5/8 in. RWE-DBMP58X12 $88.9915 ft. 5/8 in. RWE-DBMP58X15DOUBLE $217.9915 ft. 5/8 in. RWE-DBMP58X15 $92.9915 ft. 3/4 in. RWE-DBMP34X15DOUBLE $273.9915 ft. 3/4 in. RWE-DBMP34X15 $111.9912 ft. 3/4 in. RWE-DBMP34X12DOUBLE $263.9912 ft. 3/4 in. RWE-DBMP34X12 $135.99

From $0.18

to $2.11

Amsteel Blue·12 strand braided rope utilizing Dyneema SK-75 fiber, Samson Parallay design, and blue Samthane coating. Amsteel blue offers one of the highest strength-to-weight ratios and conveniently floats. It has superior flex fatigue and wear resistance making it stronger than wire rope.

Available in Blue and Silver. Sizes available: 1/16”, 7/64”, 1/8”, 3/16”, 1/4”, and 5/16”.Sold by the foot.

Super Savings on Rope

Double Braided Nylon Dock LineUnicord Double Braided Nylon Dock Lines are preshrunk and heat stabilized. They offer higher wet strength and better abrasion resistance than other competitive nylon dock lines. These lines feature a 15” eye splice & will resist mold & mildew.

Size Color Item # Price 1/2" x 15' White UNC-440078 $12.99

Gold & White UNC-440238 $16.99Black UNC-440986 $17.99Navy Blue UNC-441433 $17.99

1/2" x 25' White UNC-440092 $22.99Gold & White UNC-440252 $24.99Black UNC-441006 $26.99Navy Blue UNC-441457 $26.99





Sta-Set Polyester Double Braid·These high performance, high strength lines have a low stretch polyester double braid. Sta-set offers great durability and remains soft over time. It is flexible and easy to handle and splice. Ideal for most running rigging applications (Sheets, Control lines, Cruising halyards...).

Dia Item # Price (ft) (600' spool)1/4" NER-2100-08-00600 $0.71 $426.005/16" NER-2100-10-00600 $0.93 $558.003/8" NER-2100-12-00600 $1.12 $672.007/16" NER-2100-14-00600 $0.99 $594.00


New England Cyclone Mooring PennantsConsist of strong, durable Endura-12 rope made from Dyneema fibers. Pairing this to the end of your standard nylon mooring pennant adds the benefit of a floating, low stretch and abrasion resistant section where you need it most, at the chock.

Length Diameter Item # Price5 ft. 5/8 in. NER-54T93-20 $149.996 ft. 3/4 in. NER-54T03-24 $179.9912 ft. 3/4 in. NER-54T13-24 $249.9912 ft. 7/8 in. NER-54T13-282 $309.9912 ft. 1 in. NER-54T13-32 $399.99

New

Ma

rin

e S

up

pl

ies

Open Base Cleat316 Stainless Steel

·These Schaefer open base cleats feature smooth, generous radius edges that reduce line chafe and extend line life. Constructed from 316-grade stainless steel, these cleats are electro-polished to provide a strong, attractive finish.Length Fastener Size Item # Price3” #8 F.H. SCH-6075 $21.994.74” #10 F.H. SCH-60120 $26.996” 1/4” F.H. SCH-60150 $33.998” 5/16” F.H. SCH-60200 $55.9910” 3/8” F.H. SCH-60250 $79.99

Oarlocks

Straight Chocks316 Stainless Steel

·These Straight Chocks are made of solid 316 grade marine stainless steel for the ultimate in appearance and corrosion protection. They can accommodate lines up to 3/4 inches in diameter. For use with #10 Fasteners. Sold by the Each.

Length Item # Price5” SDG-0602001 $15.996” SDG-060210-1 $17.99

Bow Chocks 316 Stainless Steel

·Stainless steel bow chocks used to lead lines over port and starboard bow rails of a vessel while minimizing line and deck abrasion of working lines under load. These chocks are made of investment cast 316 stainless steel with the proper slant for a bow lead. Sold as a Pair.

Length Item # Price4-3/4” SDG-0600401 $20.996” SDG-0600431 $45.99

Ribbed Horn Oarlocks

ID Finish Shank Item # Pair2” Bronze 1/2” BUC-00OL4HB $41.992" Zinc 1/2" PKO-1262DP0ZNC $12.99

Ring ID Finish Shank Item # Pair2" Bronze 1/2" SDG-580590-1 $36.992" Bronze 1/2" BUC-00OL5ROB $47.992" Zinc 1/2" PKO-1267DP0ZNC $12.992-1/4" Bronze 1/2" BUC-00OL5RIB $35.99

Round Oarlocks

Let’s get on the water!Closed Base CleatsPolished Brass

·These closed base cleats have a polished, cast brass construction which offers a classic appearance while battling the harsh effects of marine environments.

Length Fastener Size Item # Price3” #6 SDG-042103-1 $14.994” #12 SDG-042104-1 $23.995” #12 SDG-042105-1 $27.99


Item # MAP PriceLEW-6656811197303 $599.99

Lewmar Pro-Sport 550 Windlass·Pro-Sport is designed around a highly efficient spur gearbox, using smaller, more powerful permanent magnet motors. The unit has manual freefall and two gypsy sizes to choose from. It is DIY-ready and easy to install. Its rugged aluminum center case and durable composite side covers make Pro-Sport the perfect choice. Complete with push-button control, anchoring has never been easier. The 550 windlass can be easily installed above the deck on boats up to 28 feet (9m).

Customer photo from Richard Lloyd. “This is my first boat project, an Acorn Skiff 12’, built from Wooden Boat plans #43.” Photo taken in the salt marsh behind First Encounter Beach, Eastham, MA.”

Length Hose Style Diam. Item # Price18” 24 in. Flexible 1-1/4” BEC-118PF $23.9924” 24 in. Flexible 1-3/4” BEC-124PF $28.9924” 6 ft. Flexible 1-3/4” BEC-124PF6 $39.9936” 36 in. Flexible 1-3/4” BEC-136PF $34.9936” 6 ft. Flexible 1-3/4” BEC-136PF6 $41.99

Thirsty-Mate Pumps“I have two of these, the 1-1/4 size and the 2” size. The smaller one was purchased around 1967 and I still use it every day to bail the dinghy. You can’t beat that! The larger one really moves a lot of water.”


Drainman Bilge Pump·Wind and waves cause a tug and pull effect on your boat’s mooring line. The Drainman uses this energy to pump out water from your bilge. No electricity and no wiring required. This innovative design can pump up to 660 gallons of water per day. It’s easy to install, handy to carry, and locks in place.

Item # DRN-DRAINMAN1

Only $45

No Electricity Required!

List: $75.00

Save $30

·The BOS Synthetic Oars are a low cost alternative for boaters who prefer synthetic (aluminum shaft and blades) construction. Aluminum oars are lightweight, strong, durable, and won’t rot. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, 7-1/2ft, and 8ft.

Starting at $2799 ea.

·High quality wooden oars offer a superior value at an excellent price. Made from Canadian spruce, each oar is turned on the long grain assuring no cross grain weakness. Round taper handle design assures comfortable grip. 3 piece laminate blade is secured with marine adhesive. Each oar is sanded and finished with a true clear varnish. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, 7-1/2ft, & 8ft.


·These Basswood Oars feature select bass wood to offer a strong but lightweight oar. These oars handle nicely with great balance and are offered at a value price. Single coat synthetic varnish finish. They are a perfect natural wood looking utility oar for everyday use. Sold by the Each. Available in 5ft, 5-1/2ft, 6ft, 6-1/2ft, 7ft, and 8ft.


Varnished Spruce Wood Oars

Caviness Basswood Oars

Caviness BOS Synthetic Oars

Beckson Thirsty-Mate Pumps·These have been around for years -- and there is a reason why. Thirsty Mate, hand bilge pumps are easy to use and they are reliable in any boating situation.

Customer photo: Bill Stirling rowing his recently completed Doug Hyland’s 13’ Beach Pea in Nantucket Sound.

Ma

rin

e S

up

pl

ies

Ritchie Supersport Compasses·Ritchie Supersport compasses deliver steadiness, performance and accuracy in a flush mount design, whether racing or headed offshore. High visibility blue dials and extra large white numerals make these compasses easy to read. Available in Black and White.

Mnt Hole Mount Item # Price4-3/4” Flush RIT SS1002 $174.994-3/4” Flush RIT SS1002W $199.995-1/8” Flush RIT SS2000 $359.995-1/8” Flush RIT SS2000W $359.99

Type Item # PriceAir Horn Kit SCP-46111 $24.99Refill Only SCP-46101 $17.99

Portable Air Horn·Air horns provide portable sound warning systems for boating, sporting events, etc. Signal horns are filled with Tetrafluoroethane gas, a non-flamable, safe gas. Refills of 8 oz. gas canisters are also available.


JD Tech Team:

Matt Specializing in sailboat hardware, tools & paint systems. { 10 years in industry }


Magma Marine Kettle Gas Grill·This Marine grade Stainless Steel Kettle grill is Magma’s most economical answer for open cockpit grilling. Available in the Standard 15” diameter or the 17” diameter party Size. 100% 18-9 stainless steel. This grill has all the basics of Magma’s superior weather proof grill design without added extras of combination kettle grill.

Size Item # Price15 inch MAG-A10205 $154.9917 inch MAG-A10215 $179.99

Dual Trumpet Air Horns·AFI dual trumpet air horns put out 121 decibels, so you can be assured of being heard. The low frequency travels fast and far over water. The Dual Trumpet Air Horn comes in two different models one with a chrome plated solid brass finish, & one with a white epoxy powder-coated finish over solid brass.

Starting at $22999

We can’t fit everything into this catalog.There are more than

70,000 items online at:JamestownDistributors.com

Zinc Anodes·Sacrificial Anodes are placed on hulls, propeller shafts, rudders, trim tabs, outboard engines, stern drives, and in the cooling system of most inboard engines to protect metal parts from galvanic corrosion. Marine anodes are available in zinc, aluminum and magnesium metals to protect different hardware items and other metal boat components. We are proud to carry a larger selection of zinc anodes to protect your boat. Call or visit us online.

We carry a huge offering of Zinc Anodes. Please call for pricing


Vetus Stainless Steel Cowl Vents·Vetus offers traditionally styled stainless steel cowl vents with deck openings offered in 3, 4, and 5 inches. These classic designs effectively flush air below decks using wind across the deck. Vetus vents rotate; simply loosen the upper ring by hand and turn. Remove without tools in the same manner. Cowl vent is supplied with a threaded ring nut and male deck ring. Comes in a comprehensive range of sizes.

Starting at $24999

Vetus Mushroom Ventilators·Install Vetus mushroom vents in cabin overheads to ventilate closed areas and minimize condensation below decks. Mushroom vents are available in 3 different sizes. All are made of 316 stainless steel with a polished high-gloss finish. Each includes a synthetic mosquito screen & counter flange.

Starting at $4895

Lewmar Ocean Hatches·Available in both flat base and flanged base designs, Ocean hatches have a two piece aluminum frame with bonded gray acrylic lens and external hinges. If cracked or scratched, replacement is easy. Simply unscrew and insert a new lens. Hatch frames have smooth, rounded edges, with rounded corners to minimize snags. Design reduces the chances of water entering the boat when the hatch is opened. Comes in a compreh-ensive range of sizes.

Starting at $34999

Starting at $6499

Vetus Flexible PVC Cowl Vents·Flexible cowl vents offer a stylish look at a fraction of the cost of stainless steel vents, and are much more forgiving when scrambling about deck. Vents are made of flexible PVC plastic. Available in two versions: a removable style with a threaded ring nut allowing the vent to rotate or be removed and capped, or a permanent ring that requires screws.Comes in a comprehensive range of sizes.

Customer photo sent in by John Dunbar of the boat Quatum Leap shown beached in Maui. The boat was on delivery from San Deigo to Honolulu when a freak wave hit and badly injured the captain. The crew was rescued and Quantum Leap abandoned. Left to its own devices with its main still drawing, the unmanned boat took three weeks to arrive in Maui.

Vetus Mushroom Ventilators“The Vetus unit is the heavy duty alternative to all those plastic vents out there. The plastic units are cheap & will not last like these SS vents. I like the rugged simplicity & good looking design.“


Starting at $4895

JD Boatlift SystemThe JD Boat Lift System, or JD-BL2, is a quick & affordable way to remove boats up to 5,000 lbs off of trailers up to 103” wide. The entire process takes less than 20 minutes & can easily be done by one person. System includes two different cross-bar styles to accommodate different trailer styles. JD-BL2

$899

Jamestown Exclusive Lift your boat off the

trailer by yourself!

Fulton F2 Aluminum Trailer Jack Offers a rugged 1,600 lb liftcapacity! The F2 is designed with the strongest mount & swivel on the market, along with faster cranking, release pin, & wheel wedge to make moving & supporting any trailer tongue easy.

Product Item # PriceF2 Twin Track (Dual Wheels) FUW-1413020134 $139.99F2 Wide Track FUW-1413040134 $124.99

Spray Nine Cleaner·Controls mildew and mold. ·Removes stubborn stains with ease.·Perfect for fiberglass, vinyl, rubber, plastic, & any hard surface above & below the deck.SPN-26901 Gallons $19.99

SPN-26932 32oz.

Only $879 Top rated General Cleaner by Practical Sailor

On-Off Hull & Bottom CleanerUse On-Off hull and bottom cleaner to remove water-line stains, algae stains, rust and gas exhaust stains from your boat’s bottom and hull areas instantly.

SALE

Our Best selling Hull Cleaner

Fulton F2 Aluminum Trailer Jack“This replaced the rusted out 6 month old jack. I fish in salt water and have spent way too much replacing jacks that are ugly and rusted. This jack was worth every penny and came with all the install hardware. Had it on in 5 minutes.“

“It’s everything advertised & much more.”

MKT-2032

Quarts Only $1299

PRY10 $1099

Y-10 Fiberglass Stain RemoverUnique stain absorbing gel that serves a variety of purposes. Ideal for removing oil, rust, exhaust, waterline and transom stains. Also for shower stalls and furniture made of fiberglass.

Taylor Made Mooring WhipsUse mooring whips to pull boats a safe distance away from docks and seawalls, protecting them from the damaging forces of waves, wind, tides and wakes. Whips consist of high quality solid fiberglass poles, aluminum-magnesium base units, tips, and mooring whip lines. Each set comes complete with all hardware necessary for installation, and can be removed easily for storage. Sold as pair.Size Item # PairBoats to 17 ft. / 2500 lbs. TAY-MW.080 $339.99Boats 18-23 ft. / 2,500 - 5,000 lbs. TAY-MW.120 $444.99Boats 24-28 ft. TAY-MW.140 $482.99Boats 29-33 ft. TAY-MW.160 $496.99Boats to 33 ft. / 20,000 lbs. TAY-PMW.1400 $659.99Boats 34-46 ft. / 20,000-36,000 lbs. TAY-PMW.1600 $729.99

Includes Shippingvideo online

FREE Shipping

on JD Mobile SiteSee website for details

Use your smartphone to research & shop at Jamestowndistributors.com

Bring the JD website to your boat or workshop

For boatersand their craft

Waterline Systems

Customers since: 1988

Location: Portsmouth, RI

Speciality: Race Boat Optimization

Randy Borges, owner of Waterline Systems, has spent most of his life on or near the water. He grew up sailing on Lake Ontario and spending his summers working in boatyards.

In 1982, Randy moved to Newport, RI and began working for Newport Offshore, which at the time, hosted many of the America’s Cup syndicates and built numerous 12-meter yachts, including the Cup-Defender Liberty. It was during this time that Randy, along with two partners (Tim Murray and Kevin Hudner), formed Waterline Systems. From its inception, the company has focused on one-design and Grand Prix optimization.

Over the years, Randy has also established himself as one of the top sail trimmers around and won the J/24 Worlds in 2002 with Brad Read. Waterline System’s ability to consistently deliver the highest performance results is intimately tied to the owner who knows how important the details are in a winning campaign.



Knowledgeable AdviceFrom the JD Tech Team

For one-on-one help choosing the right equipment for your project you can speak with one of our advisors at 401-253-3840 or email your questions at [email protected]

Victron BMV 600 Battery Monitor·The new Victron BMV 600 high precision battery monitor accurately calculates battery ampere-hours used and charge state. Ampere-hours consumed are calculated by integrating the current flowing in or out of the battery.

VIC-BAM001004000 $14499

Victron Battery Monitor“Perfect monitor that was easy to setup. The one thing you need to watch is your ground terminal. Make sure you have all of your grounds terminated in one place, then connect it to the shunt. This way you can capture all of your energy use. Perfect performance from the start - wish I would have installed this sooner.”

“Must have for any boat”

Overheat ProtectionInternal thermostat cuts power at first sign of overheating

Locking featureSide locking

levers snap onto sides of inlet

WeatherproofingFace gasket keeps moisture away from electrical pins

Connector Body ShapeSleeve-design fits snugly within inlet, removing any tension from pins

Electrical PinsStraight pins with 20x surface area. No twisting.

Ease of UseUnique shape only goes in one way. Easy to orient with no chance of misalignment. Pushes straight in & locks automatically.

SmartPlug Dual Configuration Cordset·The SmartPlug 30 Amp/125 Volt Dual Configuration Cordset connects to the SmartPlug 30 Amp Boatside Inlet (BM30S) on the boatside and a typical 30 Amp twist-type outlet on the dockside. Requires compatible SmartPlug 30 Amp Boatside Inlet (BM30S) installed on boat.

Size Item # Price25 ft SMP-C30253 $119.9950 ft SMP-C30503 $149.99

Ganz GSP Marine Grade Solar Panels·Ganz solar panel construction features an unbreakable plastic film surface with a semi-flexible aluminum backing. Ganz GSP solar chargers use thin, semi-flexible panels packed with the highest conversion efficiency solar cells available.

Output Current L x W x H Item # Price6 Watts/ 0.39 Amps 0.42 Amps 11.8” x 10” x 0.6” GAN-GSP-6 $86.0012 Watts/ 0.78 Amps 0.86 Amps 15.8” x 14.1” x 0.6” GAN-GSP-12 $149.0030 Watts/ 1.74 Amps 1.93 Amps 22.1” x 20.5” x 0.6” GAN-GSP-30 $344.0040 Watts/ 2.3 Amps 2.52 Amps 29.8” x 18” x 0.6” GAN-GSP-40 $464.0055 Watts/ 3.2 Amps 3.56 Amps 34.6” x 20.5” x 0.6” GAN-GSP-55 $644.00

Max. Short-circuit

Scan to call our JD Tech Team

257-piece Heat Shrink Connector Kit·This fantastic kit comes in a steel carrying case.·Includes (110) assorted 22-10 heat shrink butt connectors.·(145) assorted 16-10 ring terminals.·A crimp ratchet tool.·A mini butane pocket torch.

ANC-320001

Only $26999

600-Piece Nylon Insulated Connector Kit·This steel carrying case will keep all your connectors organized.·Includes an assortment of butt connectors, ring terminals, insulated male & female disconnects, and flanged spade connectors.

El

ec

tr

ica

l

ANC-250001

Only $18999

BLU-5026

Only $4599

Blue Sea Systems 12 Circuit ST Blade Fuse Blocks·Blue Sea Systems ST (screw terminal) blade fuse blocks provide up to 12 circuits for marine duty electrical systems. Available with or without a negative bus terminal strip. Fuse blocks are available with or without cover. Fuses sold separately.

BLU-5025

Only $3499

Blue Sea Systems ST Blade 6 Circuit Fuse Blocks·Blue Sea Systems ST (screw terminal) blade fuse blocks provide up to 6 circuits for marine duty electrical systems. Available with or without a negative bus terminal strip. Blocks are available with or without cover. Fuses sold separately.


Don Eley discussing the benefits of Marine Tinned wire in our Electrical Systems Video Series. You can see this OffCenterHarbor.com video and others on our website.

Blue Sea Systems M-Series Battery Switch Selector·Blue Sea M-Series battery switch selectors allow users to switch between battery banks without power interruption. They are ideal for marine and RV applications because they are ignition protected, and made from non-corrosive marine grade metals. These switches can be surface, front panel, or rear panel mounted which provides a wide array of mounting locations.

Starting at $3399

How to video:

Hardwall Exhaust HoseA premium wire reinforced marine hose. Designed for engine intake, bilge discharge, toilet and holding tank connections. Sold in either 6ft or 12ft lengths. Meets SAE J2006R2 BurstID OD psi Item # Min Price /ft

1/2" 27/32" 500 psi SHI-250-0124 6ft $4.225/8" 1" 420 psi SHI-250-0584 6ft $5.933/4" 1-3/32" 380 psi SHI-250-0340 10ft $4.137/8" 1-3/16" 320 psi SHI-250-0784 12-1/2ft $4.891" 1-11/32" 280 psi SHI-250-1000 10ft $4.451" 1-5/16" 280 psi SHI-250-1004 12-1/2ft $4.991-1/4" 1-19/32" 240 psi SHI-250-1144 12-1/2ft $5.161-1/2" 1-53/64" 200 psi SHI-250-1124 6ft $7.761-1/8" 1-7/16" 260 psi SHI-250-1184 12-1/2ft $6.881-3/8" 1-23/32" 220 psi SHI-250-1384 12-1/2ft $6.221-5/8" 2" 175 psi SHI-250-1584 6ft $7.901-3/4" 2-1/8" 175 psi SHI-250-1344 6ft $8.601-7/8" 2-19/64" 160 psi SHI-250-1784 6ft $9.152" 2-13/32" 160 psi SHI-250-2004 12-1/2ft $8.662-1/2" 2-7/8" 260 psi SHI-250-2124 12-1/2ft $10.032-3/8" 2-3/4" 260 psi SHI-250-2384 12-1/2ft $8.112-5/8" 3-1/16" 230 psi SHI-250-2584 12-1/2ft $11.582-7/8" 3-5/16" 220 psi SHI-250-2784 12-1/2ft $12.833" 3-7/16" 220 psi SHI-250-3004 12-1/2ft $12.743-1/2" 4" 190 psi SHI-250-3124 12-1/2ft $19.223-1/8" 3-5/8" 200 psi SHI-250-3184 12-1/2ft $15.804" 4-5/8" 170 psi SHI-250-4004 12-1/2ft $23.534-1/2" 5-3/32" 250 psi SHI-250-4124 12-1/2ft $18.156" 6-21/32" 130 psi SHI-250-6004 12-1/2ft $30.30

Shields Premium Rubber Sanitation HoseShields premium rubber sanitation hose provides excellent flexibility, bend radius and maximum protection from odor permeation and toilet chemicals. It is designed specifically for use with the most critical toilet and holding tank connections. Available in lengths of 12.5’ or 50’. Size Item # Roll

1-1/2" x 12-1/2” SHI-101-1124 $64.771-1/2" x 50’ SHI-1011120 $256.94


Seaward Water HeatersSeaward marine water heaters run on 110/120V AC shore power or convert engine heat with heat exchangers while underway to efficiently create hot water. These water heaters can hold anywhere from 6-11 gallons of water. All Seaward heaters have galvanized steel exterior with aluminum tank interiors, hold down brackets and ignition protection. Dual wall heat exchangers are front mounted on “F” models and rear mounted on “S” model water heaters.

Starting at $24999

Jabsco Electric Marine ToiletsJabsco electric toilets feature dual function pumps to eliminate messing around with hand pumps and dry bowl valves. The push button self-priming flush pump rinses the bowl as waste macerator and high capacity scavenger pump grind up waste and pump it out. Install this compact electric marine head where space is limited. All Jabsco electric toilets come with a heavy duty push-button switch with 5/8 in. to 3/4 in. ID inlet hose connector and 1 in. to 1-1/2 in. hose adapter for the discharge hose.

Starting at $37999

Shurflo Aqua King Water PumpsShurflo Aqua King fresh water pumps are designed for self-contained boats and RVs with multiple fixture water systems. Built specifically for the harsh marine environment, Aqua King pumps incorporate sealed switches and e-coated motors.Automatic system operation provides instant flow from water tank to faucet when a fixture is opened. Closing the faucet automatically discontinues pump operation. Snapfit ports simplify both installation and removal for routine service.

Starting at $7999

THE-92360 $14499

Thetford Porta Potti 550E Curve Electic ToiletThe Thetford Porta Potti Curve 550E toilet features a user-friendly, battery-powered flush to complement its sleek, modern design. The raised seat height and increased bowl size create a more comfortable and relaxed sitting position. Controls arehidden to keep them in safe and maintain a smooth appearance. An integrated toilet paper holder ensures the ultimate in convenience. Fresh and waste water tanks can be easily monitored with a simple check of the easy-to-read level indicators. The Curve also features an improved water tank carrying handle foreasy transportation.

Pl

um

bin

gRule-Mate Fully-Automated Bilge PumpsQuiet and compact pumps that activate when the water level is 2-1/8”. The pump and non-mercury float switch are in a single, compact housing. No on/off cycling so no power is used until the pump comes on. Clear debris quickly and easily with the removable strainer and easy access impeller area.

Capacity Hose Item # Price500 gph 3/4” RUL-RM500 $52.99750 gph 3/4” RUL-RM750 $72.991100 gph 1-1/8” RUL-RM1100 $79.99


Dwight H.Location: Cape Cod

Customer Since: 2009

“I got the idea from another smaller house boat, and the fact that waterfront property on the cape was something I would never be able to afford. I also wanted a second home which provided a real sense of recreation vs just another houseto keep up. It took all in all five years to build, but most of it happened in one year. I live on it for as much of the summer that I can afford not to be working. When you are on it, the on land world seems like a stupid idea, but the bill collectors can still reach me by cell. The houseboat which is named Casa Barco has a winter home in Dennis, MA and in the summer a home in Provincetown Harbor.”

For boatersand their craft

Shurflo Extreme Series Smart Sensor PumpsShurflo Extreme pumps represent the ultimate in pump performance and reliability, designed with a circuit board, microprocessor and pressure sensor. These pumps use the latest cutting edge technology to maximize flow and pressure while delivering “Just Like Home” flow. Corrosion resistant seamless motor shell, o-ring sealed end bells, and a protected electronic package. Each pump includes quick connect fittings.Item # Price

SHU-49010211 4.0 GPM $219.99SHU-59010211 5.7 GPM $249.99

Silicon BronzeWood Screws - Frearson Flat HeadFrearson Drive wood screws appear similar to the Phillips head but the Frearson has a more pointed 75º V shape. Traditional boatbuilders love these Silicon Bronze wood screws because they have cut threads and the full-bodied diameter shank. Unlike rolled thread screws with their reduced shank--these screws have a shank diameter that is the same size as the outside of the threads. This completely fills the clearance hole drilled for the shank thus creating a waterproof seal.

Size-Length-Part # Price (100)8 1/2" FSBWSFP8X1/2 $9.14

5/8" FSBWSFP8X5/8 $14.243/4" FSBWSFP8X3/4 $18.487/8" FSBWSFP8X7/8 $18.471" FSBWSFP8X1 $21.761-1/4" FSBWSFP8X11/4 $24.161-1/2" FSBWSFP8X11/2 $30.451-3/4" FSBWSFP8X13/4 $39.162" FSBWSFP8X2 $40.462-1/2" FSBWSFP8X21/2 $41.16

10 3/4" FSBWSFP10X3/4 $22.981" FSBWSFP10X1 $33.601-1/4" FSBWSFP10X11/4 $35.181-1/2" FSBWSFP10X11/2 $44.221-3/4" FSBWSFP10X13/4 $52.582" FSBWSFP10X2 $59.402-1/2" FSBWSFP10X21/2 $76.563" FSBWSFP10X3 $82.32

12 1" FSBWSFP12X1 $35.911-1/4" FSBWSFP12X11/4 $75.021-1/2" FSBWSFP12X11/2 $76.651-3/4" FSBWSFP12X13/4 $58.802" FSBWSFP12X2 $79.202-1/2" FSBWSFP12X21/2 $98.703" FSBWSFP12X3 $88.66

Silicon BronzeWood Screws - Slotted Flat Head Silicon bronze is the traditional choice for marine construction. It is corrosion resistant, helps prevent rot around the screw holes when used under water and is relatively strong. Although stronger than Solid Brass, Silicon Bronze screws are not as strong as Steel & require a carefully sized pilot hole to avoid breakage. We recommend drilling twice (once for the root & once for the shank) as well as using Ackempucky Screw lubricant to avoid breakage. All screws longer than 1” are threaded for 2/3 of the shank.

2-1/2" FSBWSFH14X21/2 $118.803" FSBWSFH14X3 $159.603-1/2" FSBWSFH14X31/2 $143.494" FSBWSFH14X4 $178.08

16 1-1/4" FSBWSFH16X11/4 $72.881-1/2" FSBWSFH16X11/2 $72.452" FSBWSFH16X2 $126.002-1/4" FSBWSFH16X21/4 $125.162-1/2" FSBWSFH16X21/2 $134.403" FSBWSFH16X3 $153.303-1/2" FSBWSFH16X31/2 $186.274" FSBWSFH16X4 $225.75

Size-Length-Part # Price (100)6 1/2" FSBWSFH6X1/2 $10.08

5/8" FSBWSFH6X5/8 $11.723/4" FSBWSFH6X3/4 $12.167/8" FSBWSFH6X7/8 $16.591" FSBWSFH6X1 $17.221-1/4" FSBWSFH6X11/4 $15.231-1/2" FSBWSFH6X11/2 $20.52

8 1/2" FSBWSFH8X1/2 $14.783/4" FSBWSFH8X3/4 $17.147/8" FSBWSFH8X7/8 $22.641" FSBWSFH8X1 $18.151-1/4" FSBWSFH8X11/4 $24.161-1/2" FSBWSFH8X11/2 $39.501-3/4" FSBWSFH8X13/4 $32.572" FSBWSFH8X2 $40.952-1/2" FSBWSFH8X21/2 $41.90

9 1-1/2" FSBWSFH9X11/2 $34.5310 3/4" FSBWSFH10X3/4 $26.46

7/8" FSBWSFH10X7/8 $20.901" FSBWSFH10X1 $32.551-1/4" FSBWSFH10X11/4 $42.901-1/2" FSBWSFH10X11/2 $49.061-3/4" FSBWSFH10X13/4 $62.442" FSBWSFH10X2 $54.182-1/4" FSBWSFH10X21/4 $54.862-1/2" FSBWSFH10X21/2 $72.683" FSBWSFH10X3 $134.40

12 3/4" FSBWSFH12X3/4 $29.401" FSBWSFH12X1 $54.601-1/4" FSBWSFH12X11/4 $58.171-1/2" FSBWSFH12X11/2 $70.401-3/4" FSBWSFH12X13/4 $65.212" FSBWSFH12X2 $96.802-1/4" FSBWSFH12X21/4 $66.892-1/2" FSBWSFH12X21/2 $104.723" FSBWSFH12X3 $117.183-1/2" FSBWSFH12X31/2 $95.55

14 1" FSBWSFH14X1 $67.201-1/4" FSBWSFH14X11/4 $77.621-1/2" FSBWSFH14X11/2 $81.401-3/4" FSBWSFH14X13/4 $96.602" FSBWSFH14X2 $136.402-1/4" FSBWSFH14X21/4 $119.70

Carriage BoltsSilicon bronzeCarriage bolts are designed for through-bolting where the square neck is used to keep the bolt from turning as a nut is tightened on the other end. Domestic with shoulder Size Length Part # Price (ea.) 5/16~18 4" FSBCB516X4 $3.04

4-1/2" FSBCB516X41/2 $9.455" FSBCB516X5 $10.405-1/2" FSBCB516X51/2 $10.826" FSBCB516X6 $12.707" FSBCB516X7 $12.288" FSBCB516X8 $13.749" FSBCB516X9 $14.44

1/2~13 2-1/2" FSBCB12X21/2 $8.533" FSBCB12X3 $5.883-1/2" FSBCB12X31/2 $5.754" FSBCB12X4 $9.125" FSBCB12X5 $16.296" FSBCB12X6 $19.117" FSBCB12X7 $18.808" FSBCB12X8 $20.9010" FSBCB12X10 $30.1512" FSBCB12X12 $32.0514" FSBCB12X14 $45.97

61 | Jamestowndistributors.com | 800.423.0030 | See our entire selection of Fasteners on our website

Metal Prices are volatile.Visit us

online for up to the minute prices

We cannot fit all our fasteners here. Call or visit us online.

www.JamestownDistributors.com

Fa

st

en

er

s

61 | Jamestowndistributors.com | 800.423.0030 | See our entire selection of Fasteners on our website For Boaters and thier craft | 800.423.0030 | Jamestowndistributors.com | 62

Shank HeadPenny Gauge Length Dia Dia Count/lb Item #2 D 15 1" 0.072" 3/16" 685 NCC15X13 D 14 1-1/4" 0.083" 3/16" 424 NCC14X11/44 D 12 1-1/2" 0.109" 1/4" 205 NCC12X11/2 5 D 12 1-3/4" 0.109" 1/4" 165 NCC12X13/46 D 11 2" 0.120" 9/32" 133 NCC11X28 D 10 2-1/2" 0.134" 5/16" 86 NCC10X21/210 D 9 3" 0.148" 5/16" 55 NCC9X316 D 8 3-1/2" 0.165" 3/8" 40 NCC8X31/220 D 6 4" 0.203" 7/16" 23 NCC6X4

Copper Common NailsCopper Common Nails are often used with Copper Burrs to create a traditional copper rivet, similar to clench nailing. Copper rivets are often utilized in classic planked wooden boat construction.

Silicon Bronze Threaded Nails Annular RingRecommended for wood/plywood joints where maximum resistance to withdrawal loads is required. Annular ring "barbs" create a "locking" effect. Nails resist pullout stresses. Not recommended where shear, lateral or racking loads are significant, or for end-grain nailing. Thisthread form offers holding power comparable to wood screws with maximum back-out resistance. Corrosion resistant.

Gauge Length Count/lb Item #15 3/4" 813 NSBR15X3/414 3/4" 765 NSBR14X3/4

7/8" 680 NSBR14X7/81" 524 NSBR14X11-1/4" 424 NSBR14X11/41-1/2" 358 NSBR14X11/2

12 3/4" 416 NSBR12X3/41" 302 NSBR12X11-1/4" 245 NSBR12X11/41-1/2" 205 NSBR12X11/21-3/4" 165 NSBR12X13/42" 157 NSBR12X2

10 1-1/4" 174 NSBR10X11/42" 112 NSBR10X22-1/2" 86 NSBR10X21/23" 68 NSBR10X3

8 3-1/2" 40 NSBR8X31/2

Copper RovesCopper roves are slightly conical washers. A copper nail is hammered through the joint, a rove is pushed over the end (concave side inward) and the nail is peened over so that a rivet is formed.

Size OD Item # Price (100)#14 5/16" NCRV14 $7.49#13 3/8" NCRV13 $14.01#12 7/16" NCRV12 $17.18

Copper Cut TacksCopper Cut Tacks are a favorite fastener used by Boatbuilders and Woodworkers. They feature a sharp point, tapered body and an angular cut shank to resist pull-out.

Size Count/lb Item # Price/lb 3/8" 2032 NCT3/8 $47.567/16" 1680 NCT7/16 $46.281/2" 1504 NCT1/2 $47.565/8" 848 NCT5/8 $42.463/4" 720 NCT3/4 $38.601" 464 NCT1 $38.60

Copper BurrsSmall flat washers used with copper nails in riveting, similar to clinch nailing.

Nail Hole Count CountGauge ID oz lb Item # Price (oz)#14 0.093" 128 2050 NCB14OZ $4.61#12 0.124" 93 1240 NCB12OZ $3.55#10 0.138" 47 750 NCB10OZ $3.01#9 0.146" 36 580 NCB9OZ $2.49#8 0.166" 29 465 NCB8OZ $2.49

Rose Head Copper NailsTraditional copper cut nails used with matching copper roves. These nails are extremely robust, easy to drive and when the wood fibers become damp and swell, will never work loose.

Size Length Item # Price (100)#14 3/4" NCRS14X3/4 $9.99#14 1" NCRS14X1 $13.02#13 1-1/4" NCRS13X11/4 $22.46#13 1-1/2" NCRS13X11/2 $25.89#12 2" NCRS12X2 $45.03

Gauge Shank Head Loose Fit Tight Fit15 0.072" 3/16”14 0.083" 7/32” 14 N/A12 0.109" 17/64” 12 1310 0.134" 5/16” 10 129 0.148" 5/16” 8 98 0.165" 11/32” 7 8

JD’s Decoder Copper Nail and Burr Specifications

Nail Burr Burr

All sizes $1244 / lb.

Starting at $1740 / lb.

FREE Shipping

on our Mobile Site

Use your Smartphone with our Mobile website to get Free Shipping

on your next order over $50! Only valid via Ground Shipping in the

Continental US. Some product exclusions apply. See website for details.

Limited time offer.

Scan this QR code with your phone


Stainless SteelWood Screws - Phillips18-8 stainless steelFlat HeadWood screws have coarse & deep threads to better anchor into the wood. Phillips drive allows for greater torque application when fastening. Stainless steel provides strong corrosion resistance.Size Length Part # Price (100)6 1/2" FSSWSFP6X1/2 $6.20

3/4" FSSWSFP6X3/4 $7.041" FSSWSFP6X1 $7.98

8 3/4" FSSWSFP8X3/4 $10.561" FSSWSFP8X1 $11.441-1/4" FSSWSFP8X11/4 $16.501-1/2" FSSWSFP8X11/2 $13.421-3/4" FSSWSFP8X13/4 $17.752" FSSWSFP8X2 $17.85

10 1" FSSWSFP10X1 $13.861-1/4" FSSWSFP10X11/4 $15.751-1/2" FSSWSFP10X11/2 $16.891-3/4" FSSWSFP10X13/4 $17.852" FSSWSFP10X2 $20.692-1/2" FSSWSFP10X21/2 $32.55

12 1-1/2" FSSWSFP12X11/2 $23.101-3/4" FSSWSFP12X13/4 $31.502" FSSWSFP12X2 $28.352-1/2" FSSWSFP12X21/2 $51.453" FSSWSFP12X3 $49.35

14 1-3/4" FSSWSFP14X13/4 $36.752" FSSWSFP14X2 $50.612-1/2" FSSWSFP14X21/2 $40.953" FSSWSFP14X3 $60.06

Size Length Part # Price (100) 6 1/2" FSSWSFH6X1/2 $6.62

3/4" FSSWSFH6X3/4 $7.351" FSSWSFH6X1 $10.921-1/4" FSSWSFH6X11/4 $13.131-1/2" FSSWSFH6X11/2 $16.70

8 1/2" FSSWSFH8X1/2 $11.343/4" FSSWSFH8X3/4 $11.551" FSSWSFH8X1 $12.811-1/4" FSSWSFH8X11/4 $14.181-1/2" FSSWSFH8X11/2 $16.911-3/4" FSSWSFH8X13/4 $25.202" FSSWSFH8X2 $20.48

10 3/4" FSSWSFH10X3/4 $18.901" FSSWSFH10X1 $18.061-1/4" FSSWSFH10X11/4 $22.051-1/2" FSSWSFH10X11/2 $24.151-3/4" FSSWSFH10X13/4 $36.862" FSSWSFH10X2 $41.062-1/2" FSSWSFH10X21/2 $40.323" FSSWSFH10X3 $39.27

12 1-1/4" FSSWSFH12X11/4 $30.451-3/4" FSSWSFH12X13/4 $33.602" FSSWSFH12X2 $36.752-1/2" FSSWSFH12X21/2 $36.753" FSSWSFH12X3 $42.74

14 1" FSSWSFH14X1 $75.081-1/2" FSSWSFH14X11/2 $38.852" FSSWSFH14X2 $50.402-1/2" FSSWSFH14X21/2 $50.403" FSSWSFH14X3 $52.924" FSSWSFH14X4 $109.40

Stainless SteelWood Screws - Slotted18-8 stainless steelFlat HeadThese marine grade wood screws provide excellent corrosion resistance and are the work horse for modern boatbuilding or exterior woodworking applications.

Many more Fastener styles & sizes available online

FREE Shipping

on our Mobile Site

We’re your source for hard to find Marine Fasteners!

Size Length Part # Price (100)1/4~20 1-1/2" FSSCB14X11/2 $22.05

2" FSSCB14X2 $32.552-1/4" FSSCB14X21/4 $33.602-1/2" FSSCB14X21/2 $34.653" FSSCB14X3 $36.233-1/2" FSSCB14X31/2 $47.934" FSSCB14X4 $45.894-1/2" FSSCB14X41/2 $48.415" FSSCB14X5 $52.506" FSSCB14X6 $56.918" FSSCB14X8 $727.65

5/16~18 1-1/2" FSSCB516X11/2 $33.712" FSSCB516X2 $45.152-1/2" FSSCB516X21/2 $57.543" FSSCB516X3 $58.803-1/2" FSSCB516X31/2 $57.544" FSSCB516X4 $85.585" FSSCB516X5 $118.976" FSSCB516X6 $107.52

3/8~16 1-1/2" FSSCB38X11/2 $47.462" FSSCB38X2 $48.302-1/2" FSSCB38X21/2 $77.703" FSSCB38X3 $94.503-1/2" FSSCB38X31/2 $95.554" FSSCB38X4 $116.554-1/2" FSSCB38X41/2 $93.455" FSSCB38X5 $150.155-1/2" FSSCB38X51/2 $131.046" FSSCB38X6 $183.757" FSSCB38X7 $323.40

Carriage Bolts18-8 stainless steelPrices shown are for a box of 100. Single-piece pricing is available -- call for pricing.

Size Part # Price (100)4~40 FSSLN440 $3.006~32 FSSLN632 $3.688~32 FSSLN832 $4.9410~24 FSSLN102 $5.1212~24 FSSLN122 $9.031/4~20 FSSLN14 $8.915/16~18 FSSLN516 $9.433/8~16 FSSLN38 $19.747/16~14 FSSLN716 $28.041/2~13 FSSLN12 $52.715/8~11 FSSLN58 $107.653/4~10 FSSLN34 $171.477/8~9 FSSLN78 $733.66

Lock Nuts 18-8 stainless steel (Nylon)Prices shown are for a box of 100.

Hex Nuts 18-8 stainless steelPrices shown are for a box of 100.Size Part # Price (100)4~40 FSSHN440 $2.636~32 FSSHN632 $2.318~32 FSSHN832 $2.5210~24 FSSHN102 $4.0312~24 FSSHN122 $6.91

63 | Jamestowndistributors.com | 800.423.0030 | For boaters and their craft For Boaters and thier craft | 800.423.0030 | Jamestowndistributors.com | 64

Fa

st

en

er

s

Single Auger Point Deck ScrewsSquare Drive Flat Head 18-8 stainless steelExcellent for outdoor applications. Self Drilling Type 17 Auger points are great for pressure treated lumber & other decking materials.

Size Item # Price (100)6x1-1/4 FSSQC6X11/4 $5.576x1-5/8 FSSQC6X15/8 $6.838x1-1/4 FSSQC8X11/4 $7.788x1-5/8 FSSQC8X15/8 $8.558x2 FSSQC8X2 $11.768x2-1/4 FSSQC8X21/4 $9.458x2-1/2 FSSQC8X21/2 $12.508x3 FSSQC8X3 $16.5910x2-1/2 FSSQC10X21/2 $18.4810x3 FSSQC10X3 $19.1110x3-1/2 FSSQC10X31/2 $21.4210x4 FSSQC10X4 $28.98

JD Tech Team:

Peter - Specializing in wooden boats/repairs, paints, varnish, screws & glues.

{ 40 years in industry }


Ultra Tef-Gel·Ultra Tef-Gel is a fastener lubricant used to prevent corrosion and seizing. Developed using aerospace industry experience, properly applied Tef Gel eliminates the blistering, corrosion, rust, galling, and seizing of hardware commonly experienced in corrosive environments and with dissimilar metals.It can be used in all weather conditions. The amazing composition is derived from a specially formulated PTFE paste. Syringe tube design for easy application. Whether it swivels, slips or slides, Tef-Gel will protect and ensure the painless future removal of assembled hardware.

Ultra Tef-GelTefGel is the real deal. Don’t use any “pretenders”. For preventing dissimilar metal corrosion, corrosion in general and anti-seizing, it’s the best. I’ve use it on every electrical connection I’ve made in the last 10 years and haven’t had a corrosion-related failure yet. Great stuff.

“The real deal”

1/4oz. Syringe Starting at $1299


Davis Vantage Pro2 Weather StationThe sophisticated Vantage Pro2 series weather stations feature a versatile Integrated Sensor Suite (ISS) to collect and display data from a wide range of sensors. The unit includes rain collector, temperature and humidity sensors, plus an anemometer with 40ft of cable for clear air mounting. The wireless Pro2 includes a solar panel to power the sensors. You can customize your Vantage Pro2 by adding consoles, special-purpose sensors and communication options. The Vantage Pro2 is available in both wireless and cabled versions. The wireless version can transmit a maximum of 1,000 ft; the cabled system contains a 100ft cable for connecting & powering the ISS from the Pro2 cabled console (Solar Panel not included in cabled Pro2).

MAPP Price $495

Lowrance HDS Gen 2 TouchThe New Lowrance HDS Gen 2 Touch has a high definition widescreen color display with touch screen functionality for fast easy operation, redefining ease of use. Create your own high-definition map of your favorite body of water, featuring depth contours and shading, as well as vegetation and bottom-hardness layers. Navigate Personalized or built-in Insight mapping and optional Navionics charts. View both at once in 3D perspective view, plus StructureMap, Broadband Radar and SIRIUS weather overlay capability. Super-bright widescreen displays in 7, 9 & 12-inch sizes with touchscreen control.

MAPP Price $1299

New

Create your own high definition map of your favorite body of water.

Bluetooth Marine Stereo System The Bluetooth audio kit by Poly-Planar includes an Amplifier, Controls, and Speakers; everything needed to install a high-quality stereo system on small watercrafts. The four-channel amplifier is rated at 120 Watts RMS (continuous output). Its wireless Bluetooth capability allows the waterproof unit to be mounted almost anywhere - but can also be connected with an RCA cable.The waterproof control head is easily mounted on a dash or inside a stowage compartment. It controls an iPod or other audio device via Bluetooth or with an RCA cable.

Full Kit w/ speakers $22499

Amplifier & Control Pad $181.99

New AM/FM DMD Dock/Stereo MRD85i is a marine-grade waterproof AM/FM receiver with Bluetooth streaming and Sirius Satellite capability. Several options are available for playing digital music from an iPod, smartphone, or other media storage device. Designed for use with the Apple iPod or iPhone, and keeps the device charged and dry while playing. Navigate through playlists from the face plate of the MRD85i.

PPL-MRD85i $33899

El

ec

tr

on

ics

STG-10-R10

Only $29999

Kannad SafeLink R10The SafeLink R10 SRS is a world-first personal AIS (Automatic Identification System) device, designed to be worn by individuals and activated to assist with recovery in a man overboard situation. Worn on a lifejacket and activated by simply sliding off the safety tab and lifting an arming cap to deploy the antenna, this unique product sends structured alert messages, GPS position and a special identity code directly to AIS receivers within (approx.) a four mile radius.

JD Tech Team:

Jack Specializing in electronics, electrical and marine systems.{ 30 years in industry }



ACR-3959

Only $29

ACR ResQLink 406 GPS PLBThe ACR ResQLink 406 GPS PLB is the world’s smallest Personal Locator Beacon at only 3.6 oz and 3.9 inches long. It can access the worldwide rescue service in extreme condi-tions and situations by deploying the antenna and pressing the ON button. The ResQLink 406 PLB is a full-powered, GPS-enabled rescue beacon. The ResQLink+ is the buoyant model. ACR offers an optional 406link.com service that pro-vides confirmation of standard and GPS self-tests in a matter of seconds, so that you always know it is working properly.

Type Item # PriceResQLink ACR-2880 $274.99Buoyant ResQLink+ ACR-2881 $299.99

ACR C-Strobe Emergency LightStrap the ACR C-Strobe emergency light to your life jacket, PFD, or boat for safety and visibility. The C-Strobe produces a intense 360 degree strobe visible up to 2 miles away, and will make sure you are seen out on the water. Operates on two AA alkaline or lithium batteries (not included) and lasts up to 8 hrs on continuous use in 30 degree temps. Meets USCG requirements.

MAPP Price $495

InReach GPS Device for Smartphones

Tracking:Let your friends and family follow the progress of your journey. The inReach allows multiple users to track and find each other by sending tracking data at user-selected intervals.

Messaging:The SMS function allows the user to send messages up to 160 characters in length, view incoming messages, and post to Facebook, Twitter, or a shared map.

SOS Alert:The interactive SOS function for emergency response enables automatic location tracking, and allows real-time communication with emergency personnel.

The inReach transforms your Smartphone into a global two-way text messaging & GPS device.

Two-way satellite communication

DLM-AG-008449-201

Only $24999

PRSRT STDU.S. POSTAGE

PAIDJAmESTOwn

DISTRIbUTORS

Jamestown Distributors17 Peckham Drive Bristol, RI 02809

CUSTOmER #

Cover: The Arundel 27 designed by Steve Dalzell & built by students of the Landing School in Arundel, maine. Alison Langley

JamestownDistributors.com 800.423.0030

At Jamestown we focus on having the right products, people and technology to ensure our customers get the most out of their relationship with their boats.

We have spent the past 2 years working diligently to test, evaluate and develop the TotalBoat line. Our goal is to offer products that produce great results, are easy to use & provide an incredible value.

Introducing

from Jamestown Distributors

Testing panels for U.V. Resistance in

the JD lab

Postmaster requested in-home may 6-10, 2013

THIXO is the easy way to apply Epoxy!

JD-THIXO 185ml.

Only $1599JD-THIXO6

6-pack $8999. Epoxy . Adhesives .

. Topside paint . Bottompaint . . Polish . Wax . Boat Soap .. Gelcoat . Wood Finish .

“Excellent, Easy to Use” - Jamestown · PDF fileBiaxial Cloth Tape ·...

Documents

Transcript of “Excellent, Easy to Use” - Jamestown · PDF fileBiaxial Cloth Tape ·...