Ex Devices
Transcript of Ex Devices
Ex Devices
Reliable products for potentially explosive areas
according to EU Directive 2014/34/EU
_방폭기기
2014/34/EU 기준에 따른 폭발가능성이 있는 지역에서의
설치를 위한 신뢰성있는 제품들
Dear Reader,
The expression ATEX is an acronym from ATmosphères EX-
plosibles, which is French for potentially explosive atmo-
spheres. The abbreviation serves as a short designation for
two European directives which refer to sections of the Euro-
pean Treaty:
EU directive 2014/34/EU refers to devices and protective
systems intended for operation in potentially explosive at-
mospheres. It applies to both electrical and mechanical
devices. Primarily, this directive is aimed at the manufacturers
of devices and plants. It has replaced the previous EU directive
94/9/EC (ATEX).
EU directive 1999/92/EC (ATEX 137) deals with the safety of
plants as well as protecting the health and safety of employ-
ees who could be endangered by potentially explosive atmo-
spheres. This directive defines the minimum requirements for
plant operators who ultimately bear full responsibility. Plant
operators are also required to draw up explosion protection
documents.
IECEx Certificates of Conformity (IECEx CoC)
As part of the internationalization process, JUMO has begun
the process of having the product range certified for the explo-
sion-protected area according to IECEx.
TR TC Ex certification for the Eurasian Economic Union
Within the Eurasian Economic Union (Russia, Kazakhstan,
and Belarus) products with the label “Ex” must have proof of
conformity with the valid explosion protection directives. This
proof is the TR-Ex certificate in accordance with the technical
regulations TR CU 012/2011 “On safety of equipment intended
for use in explosive atmospheres”. Upon request, several JUMO
products can be delivered with this certificate.
Project planning/application
Neatly declared components such as those offered by JUMO
are highly beneficial in designing measuring circuits for use in
potentially explosive areas and creating explosion protection
documents. These components give the operator the legal cer-
tainty that is essential. They also facilitate cost-optimal, efficient
project planning with no ifs, ands, or buts.
Zones with potentially explosive dust atmospheres (dust Ex)
require special consideration. We are also able to offer suitable
products in this area.
This brochure will give you an overview of our ATEX prod-
ucts. Of course, we are also happy to work with you to create
customized solutions for your individual requirements.
In addition, we offer a specialist book and seminar entitled
“Explosion Protection in Europe” on the subject of ATEX. For
further information go to: www.jumokorea.com
Contact – SensorsPhone: +82 70 4694 1234
,Automation
Email: [email protected]
2 3
Contents
ATEXATEX and IECEx identification marking
Zone classification and connection options 4
Sensors_센서
Measuring devices for temperature, humidity,
pressure, level, and flow 8
RTD temperature probes and thermocouples 10
Special solutions_특별한 솔루션 14
RTD temperature probes for wireless data
_무선데이터전송을 위한 RTD온도센서 16
Industrial measuring probes for
_ 습도 및 온도를 위한 산업용 측정센서들
17
Process pressure transmitters_공정압력트랜스미터 18
Pressure transmitters_압력트랜스미터 20
Level probes_레벨센서 21
Float switches and level transmitters 22
Electromagnetic flowmeters_전자기유량계
22
Automation_자동화
Recording, automation, and monitoring
_기록,자동화,모니터링
24
Temperature transmitters_온도트랜스미터 26
Signal and isolating converter_신호 및 절연컨버터 30
Paperless recorders_페이퍼리스 기록계 32
Safety temperature limiters or monitors and
two-state controllers_안전온도리미터&모니터, 33
Electromechanical thermostats,
contact dial thermometers, and bimetal switches
34
Accessories_악세사리
35
JUMO Safety Performance_안전솔루션 36
JUMO Engineering_엔지니어링 38
_온도, 습도,레벨, 유량측정을 위한 센서류
_온도센서 및 써모커플(열전대)
transmission
humidity and temperature
_플로트스위치 및 레벨트랜스미터
2상 컨트롤러
_전자기계방식 써모스탯 , 접점 다이얼온도계, 바이메탈 스위치
_유럽방폭인증
_ATEX 및 IECEx 표시, 영역구분, 연결옵션
EN 60079-0 General requirements
Gas
EN 60079-1 d Flameproof enclosureEN 60079-2 p Pressurized enclosureEN 60079-5 q Powder fillingEN 60079-6 o Oil immersionEN 60079-7 e Increased safetyEN 60079-11 ia, ib, ic Intrinsic safetyEN 60079-15 n Non-sparkingEN 60079-18 ma, mb, mc Die-cast enclosureEN 60079-25 i-Intrinsically safe system Electr. systems
Dust
EN 60079-18 maD, mbD Die-cast enclosureEN 60079-31 ta, tb, tc Protection by enclosureEN 61241-4 pD Pressurized enclosureEN 60079-11 ia, ib, ic Intrinsic safety
Protection level
a Two countable errors simultaneouslyb One countable errorc Operation without faults (no errors)
1 Very high level of safety Two independent errors Two redundant protection measures1G Gases, mist, vapors Zone 01D Dust Zone 20
2 High level of safety2G Gases, mist, vapors Zone 12D Dust Zone 21
3 Normal level of safety3G Gases, mist, vapors Zone 23D Dust Zone 22
Device category_장치 카테고리
I Mining
II Area susceptible to gas explosion
III Area susceptible to dust explosion
Ignition protection types with the corresponding
standards_해당표준에 대한 점화보호유형
[... is outside the potentially explosive area. The signal lines lead into the Ex area (e.g. supply isolators for transmitters)]
Related electrical apparatus_관련전기장치
II (1G) [Ex ia]
II (1D) [Ex ia]
Gases,
mist,
vapors
Dust Potentially explo-
sive atmosphere is
present
Gases Dust
Zone 0 Zone 20 Continuously, long-term, or frequently
Ga Da
Zone 1 Zone 21 Occasionally Gb + Ga Da + Db
Zone 2 Zone 22 Rarely and briefly Ga, Gb + Gc Da, Db + Dc
Equipment Protection Level
(EPL)
ATEX and IECEx
identification marking
Potentially explosive areas and
zone classification according to EU directive 2014/34/EU
Zone classification
유럽방폭 및 국제방폭 식별표시
2014/34/EU 지침에 따른 잠재적 폭발지역 및 구역 분류
4 5
*Typical ignitable gas
Temperature classes_온도등급
Temperature classes and explosion protection groups (excerpt)
Tempera-ture class
Max. surface temperature of the apparatus
Ignition temperature for combustible substances
T1
T2
T3
T4
T5
T6
] IIC T6 Ga
] IIIC T150 Da
Explosion groups_ 폭발그룹
T1 T2 T3 T4 T5 T6
I Methane – – – – –
IIA AcetoneEthaneAcetic acidAmmoniaPhenolPropane*
Ethyl alcoholn-Butanen-Butyl alcohol
BenzineHeating oilDiesel fuel
Acetal dehyde
– –
IIB City gas Ethyl alcoholEthylene*
Hydrogen sulfide
Ethyl ether
– –
IIC Hydrogen* Acetylene Carbon disulfide
Ex DevicesATEX Sensors Automation JUMO Safety Performance JUMO Engineering
I Electrical apparatus for mines susceptible to firedamp (e.g. mining with coal dust, methane gas)
II Electrical apparatus for all areas susceptible to gas explosions except for mines susceptible to firedamp (e.g. chemical industry with dyes, acetylene)
III Subdivision into IIA, IIB, IIC depending on ignitability.
Electrical apparatus for all areas susceptible to dust explosions
IIIA = Combustible lint IIIB = Non-conductive dust IIIC = Conductive dust
Zone 2/22
Zone 1/21
Zone0/20
Ex d/Ex e/Ex p/Ex iaCombinations
Non Ex area
AC
40
0 V
, 1
6 A
Pa
ge
30
Binary/analog
Pt1
00
Pa
ge
26
Pa
ge
34
Pa
ge
34
Bin
ary
sig
na
l
Pa
ge
10
Pa
ge
32
6 7
Ex DevicesATEX Sensors Automation JUMO Safety Performance JUMO Engineering
4 to 20 mA
Pt1
00
Pa
ge
16
Pa
ge
16
Pa
ge
33
4 t
o 2
0 m
A/H
AR
T®
4 t
o 2
0 m
A
Pa
ge
20
Pa
ge
35
4 t
o 2
0 m
A/H
AR
T®
Pa
ge
18
Pa
ge
35
HART®modem
Pt1
00
Pa
ge
11
Pa
ge
26
4 t
o 2
0 m
A
Pa
ge
17
Pa
ge
35
Pa
ge
10
Pa
ge
23
Temperature measuring devices_온도측정장치
Humidity measuring devices_습도측정장치
Sensors_센서
RTD온도프로브는 분진 및 액체, 기체 매체에서의 온도측정을 위한
내화성 인클로저(flame-proof enclosure)가 있는 장치 또는 본질
안전장치로 사용됩니다. 어플리케이션의 필요성과 측정목적에 따라,
RTD온도프로브는 서로 다른 터미널헤드, 다양한 공정연결, 매칭되
는 써모웰, LED디스플레이모듈, 구역분리 (zone separation)여부,
교환가능한 측정인서트 여부, 연결케이블 여부에 따라 각각 맞게
적용할 수 있습니다. 점화보호 유형 [Ex i]의 RTD온도프로브는 카테
고리 ia/ib(zone 1.2 또는 분리요소가 있는 zone 0), ia(zone 0,1,2
적용) 본질안전 전기회로연결에 대한 인증을 받았습니다. 내화성인
클로저의 RTD온도 프로브에는 본질적으로 안전한 전기회로에 연결
하기 위한 본질안전 버전의 인서트 측정이 장착되어 있습니다.
본질안전설계시리즈의 측정프로브는 특히 폭발가능성이 있는 지역
을 위해 개발되었으며, 전체유닛을 Ex영역에 직접 설치할 수 있습니
다. 또한, 다양한 프로브모듈은 거의 모든 어플리케이션에 다용도의
적용가능성을 제공합니다. 지능형 프로브모듈은 교정을 위해 쉽게 제
거할 수 있으며, 필요한 경우 교체할 수 있습니다. 모든 교정 계수를
프로브모듈에 직접 저장하면 시간이 많이 걸리는 수동입력에 대한 작
업시간을 절약할 수 있습니다. 또한 측정프로브는 현장에 설치된 상
태로 유지될 수 있습니다. 옵션으로 이슬점온도, 절대습도, 혼합비 및
습구온도를 계산할 수 있습니다. 사용자가 조작가능한 키보드가 통
합된 LCD디스플레이도 옵션으로 가능합니다. 이러한 특징들은 측정
프로브의 구성 및 설정을 더욱 쉽게 해 줍니다.
8 9
Flexibility_유연성
We bring knowledge and experience – you get the security.
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Maximum precision and reliability_최대 정밀도 및 신뢰성
Measuring devices for pressure, level, and flow_압력, 레벨, 유량측정장비
압력, 레벨, 유량의 측정은 거의 모든 산업분야에서 가장 중요한 측정
량 중 하나입니다.
고품질의 측정기기는 공정산업용 고정밀솔루션, 식품 및 제약-의약
분야용 위생솔루션, 기계 및 플랜트엔지니어링용 범용 솔루션에 대
한 신뢰할 수 있고 안전한 측정결과를 보장합 니다.
개발 및 생산분야에서 자격을 갖춘 직원들의 다년간의 경험의 결과로
최대 정밀도 및 신뢰성을 보장합니다. JUMO는 산업의 복잡한 상호
관계에 따라, 품질을 지속적으로 검토하고 개선하고 있습니다. 내부
적으로 개발 및 제조된 센서를 바탕으로 신제품 개발을 끊임없이 하
고 있으며, 최신 생산라인으로 제조공정을 유지하고 있습니다. 최종
적으로 각 장치에 대한 완전한 최종검수를 거칩니다.
JUMO는 내부적으로 신제품을 개발하고 고객별 맞춤버젼을 테스트
및 제조합니다. 우리의 우수한 제조기술은 품질프로세스를 보호하고
유연성을 높여, 까다로운 산업의 요구와 특정 어플리케이션에 대한
특별한 요구사항을 충족할 수 있습니다.
Designation Thermocouple with ceramic protection tube
RTD temperature probe with continuous protection tube, with stepped protection tube (not shown)
RTD temperature probe with continuous protec-tion tube (not shown); with stepped protection tube
RTD temperature probe with thermowell DIN 43767
Type 901820 902820
ATEX/IECEx identification marking
II 2 G Ex ia IIC T1 ... T6 Ga/Gb
II 2 D Ex ia IIIC T60 °C ... T400 °C Da/Db
II 1/2 G Ex ia IIC T1 ... T6 Ga/Gb
II 1/2 D Ex ia IIIC T60 °C ... T400 °C Da/Db
Version for each terminal head Ex d; Ex ia/d, Ex tb
Further approvalsSIL/PL qualified*
Temperature range °C
-100 to +600
Measuring insert Type “J”, “K”, “N”, “B”, “S”
With or without replaceable measuring insert, as single or double Pt100, Pt500, Pt1000 with and without programmable [Ex i] head transmitter
Tolerance class Class 1/2 according to DIN 43710/60584
B, A, AA (according to DIN EN 60751)
Connection – In two-wire, three-wire, or four-wire circuit
Terminal heads Form B (BUZ, BUZH) made of aluminum die-cast, protection type IP54 (IP65)
– Form BBKS made of plastic, protection type IP54, with flameproof enclosure [Ex d], terminal heads with LED display (optional), others upon request
Protection tube/ thermowell
Steel, ceramic C799, KER 610
Protection tube made of stainless steel 1.4571, titanium, Inconel®, HASTELLOY®; with PTFE or Halar® coating
Protection tube made of stainless steel 1.4571, titanium, tantalum, Inconel®, HASTELLOY®; with PTFE or Halar® coating
Thermowell D1/D2, D4/ D5 made of stainless steel 1.4571, steel 1.7335, tita-nium, tantalum, Inconel®, HASTELLOY®; with PTFE or Halar® coating
Process connection Flange/screw connection/thread
Screw connection/thread G1/2, G1, NPT, others upon request
Flange, C DN 25, C DN 40 others upon request
Thermowell
Special features Inspection certificate 3.1 available upon request for material, pressure test, leak test, insulation resistance, electrical tolerance/calibration
*Depending on the version
Thermocouples and RTD temperature probes
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_추가인증
_온도범위
_측정인서트
_공차등급
_연결
_터미널헤드
_보호튜브/써모웰
_공정연결
_특장점
_써모커플 및 RTD온도프로브
10 11
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Designation Compact RTD temperature probe
Screw-in thermometer Push-in thermometer, push-in mineral- insulated thermometer
Push-in mineral- insulated thermocouple
Type 902815 902821
ATEX/IECEx identification marking
II1/2 G Ex ia IIC T6 Ga/Gb
II1/2 D Ex ia IIIC T80 °C Da/Db
II 1/2 G Ex ia IIC T6 Ga/Gb
II 1/2 D Ex ia IIIC T80 °C IP65 Da/Db
II 2 G Ex e IIC T1 ... T6 Gb
II 2 D Ex tb IIIC T60 °C ... T80 °C IP65 Db
Further approvals SIL/PL qualified
Temperature range °C
°C,
–100 to +600 °C (mineral-insulated thermometer)
°C
Measuring insert Pt100, Pt1000 Pt100, Pt500, Pt 1000, Pt2000, NTC Type: “J”, “K”, “L”,
“S”, “B”
Tolerance class 1/3 DIN class B B, A, AA (according to DIN EN 60751) Class 1/2 according to DIN 43710/60584
Connection Four-wire circuit Two-wire circuit, three-wire circuit, four-wire circuit –
Terminal head M12 connector Silicone, PTFE, PVC, FEP, RADOX®, BETAflam®, FPM, PEEK, or PUR connecting cable (also available with shielding or armoring)
Protection tube – Stainless steel 1.4571, 1.4435, or others upon request Stainless steel 1.4541
Process connection Screw connection or thread G1/2, G1, clamp DN 25/DN 32/DN 40, or others upon request
Various threads –
Special features Without transmitter For universal application For universal application,flexible protection tube
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_추가인증
_온도범위
_측정인서트
_공차등급
_연결
_터미널헤드
_보호튜브
_공정연결
_특장점
Description Thermocouple I.T.C., I.T.C 420
RTD temperature probe I.I.R and I.I.R.420
Thermocouple C97 EEX
RTD temperature probe C97 EEX
Type 903510/40 903520/40 903510/50 903520/50
ATEX/IECEx identification marking*
II 1/1G 1/1D for I.T.C. and I.I.R
II 1/1 G 1/2D for I.T.C.420 and I.I.R420
Ex ia IIC T1 to T6 or xxx °C/T6 Ga/Ga
Ex ia/tb III CT xxx °C/T85 °C Da/Db
II 2/2 G 1/2 D*
Ex e II T1 to T6 or xxx °C/T6 Gb/Gb
Ex ta/tb IIIC T xxx °C/T85 °C Da/Db
Temperature range
Measuring insert Type “T”, “J”, “L”, “K”, “N”, thermowell or pro-
cess connection, sheath cable version
Pt100, Pt1000, NTC, PTC Type “T”, “J”, “L”, “K”, “N”, thermowell or pro-cess connection, sheath cable version
Pt100, Pt1000, NTC, PTC
Terminal head Form BUZ 72Form BUZ 85Form BUSHForm CNI-3
Form DN AGForm BUZ 85Form BUSHForm XD-AD
Protection tube Solid material or welded version made of steel, stainless steel, nickel alloy, titanium.
Process connectionThread, flange, clamp
Ambient temperature
Special features Approval only in conjunction with an ATEX or IECEx approved transmitter for I.T.C420 and I.I.R420
Thermocouples and RTD temperature probes
* IECEx version optional
_타입/제품번호
_ATEX/IECEx 식별표시
_온도범위
_측정인서트
_터미널헤드
_보호튜브
_공정연결
_특장점
_외기온도
_명칭
_써모커플 및 RTD온도프로브
12 13
Ex DevicesATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Description Thermocouple TB.97-XDT/CT
RTD temperature probe TB.97-XDR/CR
Thermocouple TXI.03 RTD temperature probe TXI.03
Type 903510/30 903520/30 903515/40 903525/40
ATEX/IECEx identification marking*
II 2/2 G Ex d IIC T1 to T6 or xxx°C/T6 Gb/Gb II 1 G 1 D
Ex ia IIC T1 ... T6 Ga
Ex ia IIIC T xxx °C Da
Temperature measuring range
Depending on connecting cable
Measuring insert Type “T”, “J”, “L”, “K”, “N”, thermowell or process connection, sheath cable version
Pt100, Pt1000, NTC Type “T”, “J”, “L”, “K”, “N”, thermowell or process connection, sheath cable version
Pt100, Pt1000, NTC, PTC
Terminal head/ connecting cable
Form XD-ADForm CNI-3 ADF
Extra code: additional protection with metal protection tube
Transmitter – Intrinsic safety according to EN 60079-11
Protection tube Solid material or welded version made of steel, stainless steel, nickel alloy, titanium
Process connection Thread, flange, clamp –
Ambient temperature –
* IECEx version optional
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_온도측정범위
_측정인서트
_트랜스미터
_터미널헤드/연결된 케이블
_보호튜브
_공정연결
_외기온도
Special solutions
Description Thermocouple C.D.E RTD temperature probe C.D.E
Thermocouple Ch.P RTD temperature probe Ch.P
Type 903515/60 903525/60 903515/50 903525/50
ATEX/IECEx identification marking*
II 2/2 G – II 1/1 D
Ex e II T1 to T6 to xxx °C/T6 Gb/Gb
Ex ta IIIC Txxx °C/T85 °C Da/Da
II 2/2 G – II 1/1 D
Ex e IIC T1 to T6 or xxx °C/T6 Gb/Gb
Ex ta IIIC Txxx °C/T85 °C Da/Da
Class I, zone 1, AEx e IIC Gb T6
Class I, div 2, groups A, B, C, D
Further approvals – CSA/UL
Cable entry Certificate II 2GD – Ex e II according to EN 60079-7 Certificate II 2GD – Ex e II according to EN 60079-7
Temperature measuring range
Measuring insert Type “T”, “J”, “L”, “K”, “N”, thermowell or
process connection, sheath cable version
Pt100, Pt1000, NTC, PTC Type “T”, “J”, “L”, “K”, “N”, thermowell or process connection, sheath cable version
Pt100, Pt1000, NTC, PTC
Connecting cable
Extra code: additional protection with metal protection tube
Protection tube Solid material or welded version made of steel, stainless steel, nickel alloy, titanium.
Process connection Thread, flange, clamp –
Ambient temperature
Special features – Certificate II 2GD – Ex e II according to EN 60079-7 and EN 60079-31
* IECEx version optional
_특별한 솔루션
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_추가인증
_온도측정범위
_측정인서트
_공정연결
_케이블입력
_연결된 케이블
_보호튜브
_외기온도
_특장점
14 15
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Description Multipoint RTD temperature probe (silo monitoring)
Hot-point RTD temperature probe
Type 903530 903540
ATEX identification marking
II 1 D - Ex ta IIIC T85 °C Da II 2/2 D - Ex tb IIIC T... °C/T85 °C Db/Db
Position Different versions for mounting on a con-crete slab or internal and external metal-lic construction
–
Temperature measuring range
Measuring insert Pt100, Pt1000, NTC, measuring insert replaceable
Connecting cable
Extra code: additional protection with metal protection tube
M12 connector
Protection tube Polypropylene:
mm
- Protection tube, 24 wires
made from galvanized steel
- Inner protection tube: polyamide
Stainless steel 1.4301:
mm
- Protection tube, 75 wires
made from stainless steel
- Inner protection tube: PVDF
Solid material or welded version made
of steel, stainless steel, nickel alloy, titanium
Special features For specific version Certificate II 2 D – Ex t II according to EN 60079-31
–
_명칭
_타입/제품번호
_ATEX 식별표시
_보호튜브
_위치
_온도측정범위
_측정인서트
_연결된 케이블
_특장점
Description JUMO Wtrans – transmitter T03
Type 902930/15/17/55
ATEX identification marking without zone separation
II 1 G Ex ia IIB T4 Ga
II 1 D Ex ia IIIB T130 °C Da
ATEX
identification marking with zone separation
II 1/2 G Ex ia IIB T4 Ga/Gb
II 1/2 D Ex ia IIIB T130 °C Da/Db
Further approvals cULus, IC, FCC
Transmission frequency 868.4
MHz (Europe); 915
MHz (USA, Australia, Canada, New Zealand, and other countries);
10 frequencies can be configured in the 915
MHz
frequency band
Transmission interval Adjustable from 1 to 3600
sDefault setting for basic type 902930/15, 902930/17, and 902930/55 = 20
s adjustable via DIP switch to 5
s, 10
s, 20
s, or 45
s
Open air range
Transmitter detection (transmitter ID)
Five-digit ID, set per default Customer-specific configuration also possible
Measurement input Pt1000 according to DIN EN 60751, in three-wire circuit
Protection type IP67 according to DIN EN 60529 (for basic type 902930/55 *)
Lithium battery Voltage: 3.6
V; rated capacity: 2.2
Ah/1.7
Ah
Special features
- For mobile or stationary temperature measurement,
wiring expenses are eliminated with modern wire-less technology, fail-safe transmission with tele-gram coding
RTD temperature probes for wireless data transmission
Description JUMO Wtrans receiver
Type902931
Special feature Receiver must be placed in non Ex area
Approval cULus, IC, FCC
Input Wireless signal from transmitters
Accuracy 0.1 %
Output
Frequency 868.4 (Europe)/
Canada)
Range
using the antenna wall mounting holder for the
antenna cable
Voltage supply
_무선데이터 전송을 위한 RTD온도센서
_명칭
_타입/제품번호
_구역분리없는 ATEX식별표시
_추가인증
_보호튜브
_특장점
_구역분리있는 ATEX식별표시
_전송주파수
_전송간격
_개방된 공기범위
_측정입력
_리튬배터리
_명칭
_타입/제품번호
_특장점
_인증
_입력
_정확도
_출력
_주파주
_범위
_전원
_전송감지
16 17
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Description Intrinsically safe industrial measuring probe for humidity, temperature, and derived variables
Type 907025
ATEX identification marking
II 1 G EEx ia IIC T4 Ga
II 1 D IP65 T=70 °C Da (with protective cover)
Measuring ranges
Output variables RH + T, optionally rF + T + Td + a + Tw + x
Measuring output
Voltage supply
Design type/protection type
threaded fitting (907025/68)
Enclosure/protection type G-AlSi10Mg/IP66 (NEMA 4X)
Humidity measurement method
Capacitive
Probes Universally replaceable (without recalibration) All calibration coefficients are saved in the probe itself
Operating temperature (probe)
Application Pharmaceuticals, petrochemicals, food
Special features
various protective filters and accessories
Industrial measuring probe for humidity and temperature
_명칭
_타입/제품번호
_ATEX 식별표시
_출력변수
_측정범위
_특장점
_출력
_전원
_디자인타입/ 보호타입
_인클로저/보호타입
_습도측정방법
_프로브
_작동온도(프로브)
_어플리케이션
_습도 및 온도를 위한 산업용 측정센서들
Designation JUMO dTRANS p02 DELTA JUMO dTRANS p02 JUMO dTRANS p20 DELTA
Type 404382 404385 403022
ATEX identification marking II 1/2G Ex ia IIC T6 Ga/Gb II 1G Ex ia IIC T4 Ga
II 1D Ex ia IIIC T105 °C Da
Further approvals – SIL 2
Measuring range (measuring span) min./max.
Differential pressure Relative, absolute Differential pressure
Accuracy 0.1 % 0.07 %
Measuring output
additionally HART®
Voltage supply
Ambient temperature
Design type/protection type IP65 field housing according to EN 60529, aluminum IP67 field housing according to EN 60529, stainless steel
Process connection
or with pressure separatorVarious threads or front-flush connections or with pressure separator
Electrical connection Cable fitting Cable fitting
Medium temperatures
Application Level, flow, process pressure Level, process pressure Level, flow, process pressure
Special features Various accessories, complete selection of diaphragm seals, programming via keypad/LCD display or PC setup program
Pressure connection also front flush, various accessories, com-plete selection of diaphragm seals, programming via keypad/LCD display or PC setup pro-gram
Various accessories, complete selection of pressure separators, programming via rotary knob/LCD display or PC setup program
Process pressure transmitters_공정압력트랜스미터
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_측정범위(측정스판)
_디자인타입/보호타입
_전기연결
_공정연결
_특장점
_정확도
_출력
_전원
_외기온도
_매체온도
_어플리케이션
18 19
Ex Devices
ATEX Sensors Automation JUMO Safety Performance Engineering
Designation JUMO dTRANS p20 DELTA Ex d JUMO dTRANS p20 JUMO dTRANS p20 Ex d
Type 403023 403025 403026
ATEX identification marking II 1/2G Ex d IIC T6 ... T4 Ga/Gb
II 2D Ex t IIIC T105 °C Db
II 1/2G Ex ia IIC T6 ... T3 Ga/Gb
II 1/2D Ex ia IIIC T105 °C Da/Db
II 1/2G Ex d IIC T6 ... T4 Ga/Gb
II 1/2D Ex t IIIC T105 °C Da/Db
Further approvals SIL 2 NEPSI, DNV GL, SIL 2
SIl 2
Measuring range (measuring span) min./max.
Differential pressure 10 mbar/100 bar
Relative/absolute 600 mbar/600 bar
Accuracy 0.07 % 0.05 %
Measuring output 4 to 20 mA (two-wire), additionally HART®
Voltage supply DC 11.5 to 36 V
Ambient temperature –50 to +85 °C
Design type/ protection type IP67 field housing according to EN 60529, stainless steel
Process connection
or with pressure separatorVarious threads or front-flush connections
Electrical connection Cable fitting Cable fitting Cable fitting
Medium temperatures Max. +110 °C Max. +120 °COptionally max. +200 °C
Max. +115 °C
Application Level, flow, process pressure Level, process pressure
Special features Various accessories, complete selection of pressure separators, programming via rotary knob/LCD display or PC setup program
Pressure connection also front flush, various accessories, complete selection of pressure separators, programming via rotary knob/LCD display or PC setup program
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_측정범위(측정스판)
_디자인타입/보호타입
_전기연결
_공정연결
_특장점
_정확도
_출력
_전원
_외기온도
_매체온도
_어플리케이션
Description JUMO MIDAS S21 Ex Pressure transmitter
JUMO dTRANS p33 Pressure transmitter
Type 404710 404753
ATEX identification marking
II 2G Ex ib IIC T6 ... T4 Gb
Further approvals – Met. certificate
Measuring range (measuring span) min./max.
Relative, absolute Relative, absolute
Accuracy
Measuring output
Voltage supply
Ambient temperature
Design type/ protection Stainless steel case IP65 according to EN 60529
Process connection Various threads or front-flush connections
Electrical connection Attached cable, M12
Cable socket, attached cable, M12, terminal head
Medium temperatures
Application Process pressure, level
Application Oil, fuel, natural gas, painting plants/robots, process engineering, chemistry
Hygienic applications in the food and pharmaceutical industry
Pressure transmitters_압력트랜스미터
type
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_측정범위(측정스판)
_디자인타입/보호타입
_전기연결
_공정연결
_어플리케이션
_정확도
_출력
_전원
_외기온도
_매체온도
_어플리케이션
20 21
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Level probes
Description JUMO dTRANS p33
Level probe
MAERA S29 SW
Level probe
Type 404753 404393
ATEX identification marking
II 2G Ex ia IIC T6 ... T4 Gb
II 1G Ex ia IIB T6 ... T4 Da
II 2G Ex ib IIC T6 ... T4 Gb
II 2D Ex ib IIIC T70 °C ... T100 °C Db
Further approvals Met. certificate DNV GL
Measuring range (measuring span) min./max.
Relative Relative, absolute
Accuracy
Measuring output
Voltage supply
Ambient temperature
Design type/ protection Stainless steel case IP68 according to EN 60529
Titanium case IP68
Process connection Threads, open or closed system G1/2” front-flush with protective cap
Electrical connection Attached cable made from PE; cutting ring fitting for protection tube
Attached cable made from FEP
Medium temperatures
Application Level
Special features Connection to protection tube for zone 0 –
Applications All level applications in the Ex area
Ballast tanks in the shipbuilding industry, wastewater in splash water containers, swimming pool technology in mediums containing chloride
type
_레벨센서
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_측정범위(측정스판)
_디자인타입/보호타입
_전기연결
_공정연결
_특장점
_정확도
_출력
_전원
_외기온도
_매체온도
_어플리케이션
_어플리케이션
Float switches and level transmitters
Designation JUMO NESOS R01 LS und JUMO NESOS R02 LS
Float switch in miniature and standard version
JUMO NESOS R03 LS
Float switch with chamber
JUMO NESOS R20 LT
Float level transmitter
Type 408301/02 408303 408320
Identification marking according to ATEX/IECEx
ATEX, IECEx – ATEX
Further approvals DNV GL DNV GL DNV GL
Temperature sensor (optional)
Temperature switch (optional)
Guide tube length (max.)
Medium temperature
Sensor Reed contact Reed contact Reed chain
Accuracy
Output signals potentiometric
Switching function SPST-NO, N/O contact; SPST-NC, N/C contact; SPDT-CO, changeover contact; SPST-NO, N/O contact bistable
SPST-NO, N/O contact; SPST-NC, N/C contact; SPDT-CO, changeover contact
–
Parts in contact with medium Stainless steel AISI 316; optionally titanium, HASTELLOY®-C
Stainless steel AISI 316, aluminum; optionally titanium, HASTELLOY®-C
Stainless steel AISI 316; optionally titanium, HASTELLOY®-C
Prozessanschluss Thread, flange Chamber with compression fitting
Thread, flange
Electrical connection Cable, cable with connector, cable socket, round plug
connection housing Cable, connection housing
_플로트스위치 및 레벨트랜스미터
_명칭
_타입/제품번호
_온도센서(옵션)
_추가인증
_정확도
_출력신호
_매체온도
_ATEX/IECEx 식별표시
_온도센서(옵션)
_최대 가이드 튜브길이
_센서
_스위칭타입
_매체접촉부 재질
_공정연결
_전기연결
22 23
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Electromagnetic flowmeters
Designation JUMO flowTRANS MAG S01/S02 JUMO flowTRANS MAG H01/H02
Type 406012/406013 406015/406016
ATEX/IECEx identification marking
ATEX certificate:
DN 3 to 300: II 2G Ex d e ia ma IIC T6 ... T2 Gb
> DN300: II 2G Ex d e ia IIC T6 … T2 Gb
IECEx certificate:
DN 3 to 300: Ex d e ia ma IIC T6 ... T2 Gb
> DN300: Ex d e ia IIC T6 ... T2 Gb
ATEX certificate:
II 2G Ex d e ia ma IIC T6 ... T2 Gb
IECEx certificate:
Ex d e ia ma IIC T6 ... T2 Gb
Further approvals SIl 2 FDA compliant
Nominal widths DN 3 to DN 2000 DN 1 to DN 100
Nominal pressure PN 10 to PN 40
Measuring accuracy
Process connections Flange according to DIN EN, ASME Screw connection according to DIN 11851,
welded socket according to DIN 11850,
Tri-Clamp according to DIN 32676, and
ASME BPE, connection flange
Process connection
materialSteel, stainless steel Stainless steel 1.4404
with EPDM seal
Lining material PFA, ETFE, PTFE, hard or soft rubber PFA (vacuum proof)
Measuring electrode material
1.4571, 1.4539, HASTELLOY® C-4, titanium, tantalum, platinum-iridium
1.4571, 1.4539, HASTELLOY®-C C-4, tantalum (others upon request)
Medium temperature
Inputs/outputs
Communication HART® (Standard), PROFIBUS PA
Protection type IP67, IP68, NEMA 4X
Voltage supply
_전자기 유량계
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_측정정확도
_입력/출력
_전원
_보호타입
_공칭너비
_공칭압력
_공정연결
_공정연결부재질
_라이닝재질
_측정전극재질
_외기온도
_통신
Recording, automation, and monitoring
Automation_자동화
_기록,자동화,모니터링
현대산업사회에서의 생활은 기술의 급속한 발전에 의해 형성됩니다. 각
공정의 단계마다 증가된 안전을 요구하고 있습니다. 폭발위험은 석유
화학산업 뿐만 아니라 많은 산업에 존재하는 위험 요소입니다. 특히나
석유화학산업은 폭발위험으로부터 보호되는 제품을 선별적으로 사용 해
야하며, 사고발생의 심각성으로 인해 관련 조치를 수행해야 합니다.
JUMO는 플랜트 및 공정에 대한 신뢰성있는 모니터링을 위한 혁신적인
제품들을 제공할 수 있습 니다.
기계 및 플랜트 엔지니어링에 대한 핵심 전문지식의 잠재력을 최대한 활
용하려면 explosion protection(방폭)을 포함한 측정 및 제어기술의 안
전관련 측면을 다룰 전문적인 파트너가 필요합 니다.
JUMO는 항상 최신 산업경향을 염두에 두며, 방폭관련 측정 및 제어기술
에 대한 모든 요구사항을 충족하는 다양한 제품을 개발 및 생산하고 있습
니다.
우리의 전문지식은 폭발 가능성이 있는 환경에서 전기적에너지를 제어하
는데 최신 기술을 반영하고 있습니다. 끊임없이 변화하는 도전적인 산업
시장에서의 새로운 요구사항에 대해 안전하고 신뢰성있는 혁신적인 제품
을 공급하고 있습니다.
24 25
Maximum plant availability and optimum process reliability
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
_플랜트 가용성 극대화 및 공정신뢰성 최적화
우리의 제품을 사용하는 고객과 지속적으로 접촉하여 도전적인 산업
부분에서 새로운 요구에 정확하게 대응하고 있습니다.
JUMO는 맞춤식 새로운개발로 우리의 제품군을 다양화하고있습니다.
Designation JUMO dTRANS T02 Ex JUMO dTRANS T01 Ex JUMO dTRANS T01 HART®/Ex
Type 707025 707015 707016
Identification marking according to ATEX
II (1) G [Ex ia Ga] IIC
II (1) D [Ex ia Da] IIIC
II 1G Ex ia IIC T6 II 1G Ex ia IIC T6/T5/T4
II 2G Ex ia IIC T6/T5/T4
IEC Ex identification marking
[Ex ia Ga] IIC
[Ex ia Da] IIIC
Ex ia IIC T6...T4 Ga –
Further approvals Met. certificate
Inputs Thermocouple, Pt100, Pt500, Pt1000, resistance transmitter,
Thermocouple: type “L”, “J”, “U”, “T”, “K”, “E”, “N”, “S”, “R”, “B”, “D”, “C”, Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, in two-wire, three-wire, or four-wire circuit
Outputs
Voltage supplyprotection reverse voltage protection
Operating temperature
Storage temperature
Housing width 44 mm
Protection type IP20 according to EN 60529 IP54 in the terminal head, open mounting IP00 according to EN 60529
Mounting site Outside the Ex area In the Ex area
Transmission behavior Temperature-linear, customer-specific linearization
Operation Fine adjustment via device keys, device configuration via setup program
Completely configurable via setup program
Completely configurable via setup program with HART® modem
Special features Galvanic isolation between measuring input, output, and auxiliary voltage, compact design
Flexible application possibilities with free configuration and gal-vanic isolation, output simulation
Communication in Ex area via HART® communicator
Temperature transmitters_온도트랜스미터
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_보호타입
_출력
_전원
_IEC Ex 식별표시
_입력
_작동온도
_보관온도
_하우징 넓이
_마운팅위치
_전송동작
_작동
_특장점
26 27
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Two-channel temperature transmitters
Designation JUMO dTRANS T07 B Ex
JUMO dTRANS T07 B Ex SIL
JUMO dTRANS T07 T Ex
JUMO dTRANS T07 T Ex SIL
Type 707085, 707086 707087, 707088
Identification marking according to ATEX
II1G Ex ia IIC T6…T4 Ga
II2G Ex ia IIC T6…T4 Gb
II2(1)G Ex ib [ia Ga] IIC T6…T4 Gb
Identification marking according to IECEx
ia IIC T6…T4 Ga
ia IIC T6…T4 Gb
ib [ia Ga] IIC T6…T4 Gb
Further approvals cULus, SIL 2 and SIL 3
Inputs 2 sensor inputs for RTD temperature probes Pt50, Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Cu50, Cu100 in 2/3/4 wire circuit or thermocouples A, B, C, D, E, J, K, L, N, R, S, T, U
Outputs
Voltage supply
Operating temperature Max. -40 to +85 °C (depending on the version and Ex zone)
-40 to +46 °C (zone 1; T6)-40 to +61 °C (zone 1; T5)-40 to +85 °C (zone 1; T4)
Storage temperature
Housing width
Protection type IP66/67 (in the field housing) IP20
Mounting site In terminal head, form B
Transmission behavior Temperature-linear, resistance-linear, voltage-linear
Operation On the device via DIP switches when using a separate plug-in display or via HART® modem with JUMO DTM or HART® communicator with JUMO DD
On the device or via HART® modem with JUMO DTM or HART® communicator with JUMO DD
Special features 2 universal measurement inputs (RTD, TC, Ω, mV), high degree of accuracy (0.1 K with Pt100 sensor),
the front, SIL 2/SIL 3 hardware/software according to IEC 61508, reliable measuring mode due to sensor monitoring and device hardware error detection
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_보호타입
_출력
_전원
_IEC Ex 식별표시
_입력
_작동온도
_보관온도
_하우징 넓이
_마운팅위치
_전송동작
_작동
_특장점
_2채널 온도트랜스미터
Designation JUMO dTRANS T08 01
Eco thermocouple transmitter (J, K)
JUMO dTRANS T08 02
Eco transmitter (Pt100)
JUMO dTRANS T08 11
Thermocouple transmitter (J, K)
JUMO dTRANS T08 12
Transmitter (Pt100
Type 707101 707102 707111 707112
ATEX/IECEx identification marking II 3 G Ex nA IIC T4 Gc
Input Thermo-couple
J and K
Int. CJC
Ext. CJC
Pt100 Two/three/ four wire
Output
(current or voltage)
Current Active
Passive – – – –
Voltage
Front LED
Power supplyalso via bus bar
Isolation – – 2500 V
Accuracy
* You can find further information in the respective data sheets
Temperature transmitters_온도트랜스미터
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_출력
_전원
_입력
_전류
_정확도
_절연
_전면부LED
_전압
_써모커플
_2/3/4 와이어
28 29
Ex DevicesATEX Sensors Automation JUMO Safety Performance JUMO Engineering
JUMO dTRANS T08 12
er (Pt100)
JUMO dTRANS T08 13
HART® transmitter (Pt100, J, K)
JUMO dTRANS T08 14**
Universal transmitter
JUMO dTRANS T08 31
Two-wire transmitter (Pt100, J, K)
JUMO dTRANS T08 33
Two-wire transmitter (Pt100)
JUMO dTRANS T08 37
Two-wire HART® transmitter (Pt100, J, K)
707113 707114 707131 707133 707137
l l l J and K; additionally B, E, J, K, L, N, R, S, T, U, W3, W5, LR
l l
l l l l l l
l l l l l
l l l Such as Pt100, Pt500, Pt1000
l l l
4 to 20 mA; 20 to 4 mA (HART® 7)
0 to 20 mA;4 to 20 mA;20 to 0 mA; 20 to 4 mA
– – 4 to 20 mA;20 to 4 mA
4 to 20 mA; 20 to 4 mA (HART® 7)
– 0(0.2) to 1 V; 0(1) to 5 V;0(2) to 10 V;1 to (0.2)0 V;5 to (1)0 V; 10 to (2)0 V
– – –
l l l l l l – – –
Loop power supply (5.5 to 35 V DC)
Loop power supply (3.3 to 35 V DC)
Loop power supply (6.2 to 35 V DC)
– 2500 V
<0.05 % in all available areas or <0.1 °C
<0.05 % in all available areas or <0.1 °C
<0.1 % in all available areas
<0.05 % in all available areas or <0.1 °C
<0.1 % in all available areas or <0.2 °C
<0.05 % in all available areas or <0.1 °C
Signal and isolating converter
Designation JUMO dTRANS S08 03
Signal isolator (mA)
JUMO dTRANS S08 04
Signal converter
(V, mA)/supply isolator
JUMO dTRANS S08 05
Eco signal converter
(V, mA)
JUMO dTRANS S08 08
Signal isolator/s
(mA)
Type 707203 707204 707205 707208
ATEX/IECEx identification marking II 3 G Ex nA IIC T4 Gc
Input Current Active
Passive –(supply isolator)
– –
Voltage – –
Bipolar – – – –
Output Current Active 0 to 23 mA
Passive – – – –
Voltage –
Splitter
1 input – 2 outputs
Front LED
Power supply
Isolation
* You can find further information in the respective data sheets
** Also available in two-channel version (S08 85A2)
*** Also available in two-channel version (S08 86A2 and S08 86B2)
_명칭
_타입/제품번호
_ATEX/IECEx 식별표시
_출력
_입력
_전류
_절연
_전원
_전면부LED
_전압
_신호/절연 컨버터
_전류
_전압
30 31
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
JUMO dTRANS S08 08
or/splitter
JUMO dTRANS S08 09
Signal converter (V, mA)/
supply isolator/splitter
JUMO dTRANS S08 17
Bipolar signal
converter/isolator
JUMO dTRANS S08 18
Bipolar signal
converter/splitter
JUMO dTRANS S08 85
Loop powered
signal isolator
JUMO dTRANS S08 86
Two-wire transmitter
signal amplifier or
isolation amplifier
707209 707217 707218 707285 ** 707286 ***
0 to 20 mA;4 to 20 mA
±10 mA;±20 mA
0 to 23 mA 3.5 to 23 mA (type S08 86B1 and S08 86B2)
4 to 20 mA (supply isolator)
– – – 3.5 to 23 mA (type S08 86A1 and S08 86A2)
0(1) to 5 V;0(2) to 10 V
±5 V±10 V
– –
– l l – –
0(4) to 20 mA 0(4) to 20 mA;bipolar wiring: ±10 mA, ±20 mA
0 to 23 mA –
– – – – 3.5 to 23 mA
0(1) to 5 V;0(2) to 10 V
– –
l l l
l l l l l l l
Loop powered input Loop powered output (6.0 to 35 V DC)
Paperless recorders
Designation JUMO LOGOSCREEN nt With stainless steel front
JUMO LOGOSCREEN fd With stainless steel front
Type 706581 706585
ATEX identification marking
II 2G Ex px IIC
II 2D Ex px IIIC
Further approvals cULus, Met. certificate cULus
Modular hardware concept
Up to 18 internal analog inputs,up to 24 binary I/O, additionally up to 54 external analog inputs and binary I/O as well as 18 math and logic channels
Operation Via sensor control panel
Interfaces on the rear RS232/485 (Modbus), ETHERNET, 2 USB connections, RS232 (barcode reader), PROFIBUS DP (optional)
Mounting site The device is suitable for installation in control cabinets with pressurized enclosure. Under these conditions, use in a potentially explosive area (zone 1 or 21) is admissible from the front.
Batch reports Up to three batches can be recorded simultaneously and independent of each other
Special features 27 counters/integrators, web server with online-visualization, stainless steel front with laminated glass panel
27 counters/integrators, web servers with online visualization, stainless steel front with laminated glass panel, FDA-compliant according to Title 21 CFR – Part 11, horizontal recorder image
_페이퍼리스 기록계
_명칭
_타입/제품번호
_ATEX 식별표시
_추가인증
_배치리포트
_작동
_모듈식 하드웨어개념
_후면 인터페이스
_마운팅위치
_특장점
32 33
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Designation JUMO safetyM STB/STW Ex JUMO exTHERM-DR
Type 701155 701055
ATEX/IECEx identification marking
One sensor variant
II (1) (2) (3) G (b1) [Ex ia Ga] [e pz] IIC
II (1) (2) (3) D (b1) [Ex ia Da] [p Dc] IIICTwo sensor variant
II (1) (1) (2) G (b2) [Ex ia Ga] [e py] IIC
II (1) (1) (2) D (b2) [Ex ia Da] [p Db] IIIC
II (2) G [Ex eb Gb] IIC
resp. Ex II (2) G [Ex db Gb] IIC
II (2) D [Ex tb Ob] IIIC
II (1) G [Ex ia Ga] IIC
II (1) D [Ex ia Da] IIIC
Ex II (2) G [Ex eb Gb] IIC
Ex II (2) D [Ex tb Db] IIIC
Further approvals DNV GL, DIN, DGRL, SIL 3, PL e, IPL 2 –
Analog inputs Thermocouple: type “L”, “J”, “U”, “T”, “K”, “N”, “S”, “R”, “B”, “D”, RTD temperature probe: Pt100,
Analog outputs
can be used as actual value output for main measured value, measured value 1, 2, differential
Analog output configurable as output for actual value, setpoint value, or logic output
Digital input One floating contact for unlocking, keyboard lock, level inhibit
Relay outputs KV − can be used as pre-alarmAlarm − limit alarm evaluated for temperature limiter
Two limit value alarms, one as control output
Voltage supply
Protection type IP20 according to EN 60529
Mounting site Outside the Ex area
Operation LCD display for plain text display
Safety temperature limiters/monitors and two-state controllers _안전온도리미터 /모니터, 2상컨트롤러
_명칭
_타입/제품번호
_ATEX /IECEx식별표시
_추가인증
_보호타입
_전원
_아날로그 입력
_아날로그 출력
_디지털 입력
_릴레이 출력
_마운팅위치
_작동
Electromechanical thermostats, contact dial thermometers, and bimetal switches
JUMO exTHERM-AT Explosion-protected surface-mounted thermostat
Type 605055
ATEX/IECEx identification marking
II 2G Ex d e IIC T4/T5/T6 Gb
II 2D Ex tb IIIC T85 °C/T100 °C/T130 °C Db
Further approvals SIL 2
Control ranges
Operating temperature
Switching capacity on the N/C
A, cos φ = 1(0.6)
Switching function Temperature monitor, safety temperature monitor, safety temperature limiter
Probe diameter
Capillary length
Protection type IP65 according to EN 60529
Housing material Polyester (reinforced) stainless steel (optional)
Special feature Thermowells for zone isolation type 605057
Description Bimetal temperature switch
Contact dial thermometer
Type 608301 608520
ATEX identifi-cation marking
For use only in combination with an [Ex i] switching amplifier in zone 2/22
Further approvals – Met. certificate
Control ranges
Operating temperature
120
°C
Switching capacity on the N/C contact
Switching capacity depends on the [Ex i] switching amplifier type
Probe diameter
Protection type IP67 (standard)
_N/C접점 전환용량
_전원
_특장점
Designation
_N/C접점 전환용량contact
_전자기계방식써모스탯, 접점다이얼온도계, 바이메탈스위치
_명칭
_타입/제품번호
_ATEX /IECEx식별표시
_추가인증
_보호타입
_작동온도
_특장점
_하우징 재질
_제어 범위
_스위칭기능
_프로브 다이얼미터
_캐피러리 길이
_추가인증
_ATEX 식별표시
_제어 범위
_작동온도
_타입/제품번호
_프로브 직경
_보호타입
_명칭
34 35
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Description Thermowell
Type 605057
ATEX identification marking
II 1/2 G Ex Ga
II 1/2 D Ex Da
Material CrNi 1.4571
Version Screw-inWeld-in
Pipe diameter
Insertion lengths
Designation JUMO Ex-i repeater power supply/input isolating amplifier
Type 707530
ATEX identification marking
II (1) G [Ex ia Ga] IIC/IIB
II (1) D [Ex ia Da] IIIC
II 3 (1) G Ex nA [ia Ga] IIC/IIB T4 Gc
Further approvals SIL 2, UL
Input
Output
(active/passive)
Voltage supply
Operating temperature
Storage temperature
Housing width
Protection type IP20 according to EN 60529
Mounting site Outside the Ex area
Transmission behavior Linear
Configuration Via DIP switch
Special features HART® compatible
Accessories_악세사리:
_2-wire 방폭트랜스미터 및 써모웰을 위한 방폭아이솔레이터
Ex-i supply isolator for Ex-two-wire transmitter and thermowells
_타입/제품번호
_ATEX 식별표시
_추가인증
_명칭
_입력
_전원
_마운팅 위치
_작동온도
_보호타입
_특장점
_하우징 넓이
_보관온도
_전송동작
_출력
_구성
_타입/제품번호
_ATEX 식별표시
_재질
_버전
_파이프 지름
_삽입길이
_명칭
JUMO Safety Performance – the compact solution for functional safety
SIL classifications of the compact solution
_컴팩트한 솔루션의 SIL분류Advantages of the new JSP (JUMO Safety Performance)
brand_새로운 JSP (JUMO Safety Performance) 브랜드의 장점
O
Functional Safety – Hassle-Free!
JUMO는 온도측정기술 및 안전컨트롤러에 대한 수십년의 경험을 바
탕으로 별도의 추가 검증 또는 계산 과정없이 온도측정이 가능한 안
전관련 소형솔루션을 이미 개발했습니다. 여기에는 단일채널 안전 컨
트롤러 JUMO safetyM이 JUMO RTD온도센서 또는 써모커플 (열
전대)과 결합되어있습니다. JUMO가 발행한 제조자 선언문서로 검
증된 SIL3 /PLe 레벨 의 컴팩트한 솔루션을 구축합니다. 압력, 레벨
및 유량에 대한 컴팩트한 솔루션은 센서기술 및 액추에이터의 선택에
따라 최대 SIL2 및 PL d 레벨까지 설계할 수 있습니다. 이에 대한 계
산은 사용자가 수행합니다. JUMO Safety Performance 전문가팀
은 지정된 지침에 대한 준수 여부를 계산하여 사용자를 지원합니다.
최대 SIL3 / PL e 레벨까지 측정 가능한 인증된 측정 체인
포괄적인 제품구성 프로그램 보유 - SIL 구성요소 선택 시,
최고 수준의 유연성 제공
안전 모니터링 및 시스템 차단
어플리케이션에 따라 선택가능한 안전 기능
(예. DIN 14597규격에 따른 리미터 또는 모니터 기능)
온도, 압력, 레벨, 유량과 같이 다양한 측정량 적용 가능
센서기술, 엑추에이터의 가변적이고 독립적 선택 가능
공정 요구사항사항에 맞춘 검증된 측정체인
JUMO safetM을 JUMO온도센서와 적용하는 경우,
사용자가 추가적으로 SIL을 직접 계산할 필요 없음
ATEX지침에 따른 컴팩트한 방폭솔루션 [Ex i],[Ex e]
숙련된 JUMO Safety Performance팀의 전문가가
제공하는 안전체인에 대한 평가
■
■
■
■
■
■
■
■
■
■
_기능 안전을 위한 최적의 컴팩트 솔루션
JUMO Safety Performance는 향상된 성능의 새로운 JUMO Safety 브랜드입니다. 이 브랜드로 표시된 제품은 안전 관련 공장에 적합합니다. 여기에는 SIL 및 PL인증을 받은 전자장치뿐만 아니라 SIL 및 PL 측정 체인에서 사용하기에 적합한 수동소자방식의 센서도 포함됩니다. 이러한 제품들은 "SIL qualified"와 "PL qualified"로 라벨이 붙어있습니다. 특히 프로세스에 맞게 조정된 구성요소의 구성은 고객의 사이트에서 신뢰할 수 있는 응용프로그램 구축에 매우 중요 합니다. JUMO Safety Performance 팀은 SIL 및 PL에 대한 전문적인 솔루션을 사용자에게 제공합니다.
36 37
General comment_일반정보:
The JUMO safetyM STB/STW has an output signal to control the downstreamed safety actuator systems.
Additional output signal suitable for downstreamed visualization, controlling, and documentation.
* Auxiliary energy for power supply is required separately.
Safety-related switch-off up to SIL 3 in ATEX version (ignition protection type [Ex ia] and [Ex e])
Compact system for flow*
JUMO safetyM STB/STW Ex,
[Ex ia]
Type 701155
JUMO flowTRANS MAG S01
Type 406012
Compact system for pressureEx-i repeater power supply/input isolating amplifier
Type 707530
JUMO dTRANS p20
Type 403025JUMO safetyM STB/STW
Type 701150
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M. K. JUCHHEIM GmbH, Sitz: 36039 Fulda,
Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim
Moritz-Juchheim-Straße 1
36039 Fulda, Germany
Tel.: +49 661 6003-0
Fax: +49 661 6003-500
E-Mail: [email protected]
Internet: www.jumo.net
JUMO GmbH & Co. KG
Certified compact system for temperature
JUMO thermocouples/ RTD temperature probes
JUMO safetyM STB/STW Ex,
[Ex ia]
Type 701155
Compact system for temperature
JUMO dTRANS T07 B Ex SIL
Type 707086
JUMO thermocouples/ RTD temperature probes
Ex-i repeater power supply/input isolating amplifier
Type 707530
JUMO safetyM STB/STW
Type 701150
Kommanditgesellschaft, Sitz: 36039 Fulda, Amtsgericht Fulda, HRA 302 · USt.-Id.-Nr. DE 112411234; Persönlich haftende Gesellschafterin: M. K. JUCHHEIM GmbH, Sitz: 36039 Fulda,
Amtsgericht Fulda, HRB 17; Geschäftsführer: Dipl.-Ing. Bernhard Juchheim, Dipl.-Kfm. Michael Juchheim
Moritz-Juchheim-Straße 1
36039 Fulda, Germany
Tel.: +49 661 6003-0
Fax: +49 661 6003-500
E-Mail: [email protected]
Internet: www.jumo.net
JUMO GmbH & Co. KG
Certified compact system for temperature
Manufacturer’s declaration
JUMO thermocouples/ RTD temperature probes
JUMO safetyM STB/STW Ex,
[Ex e]
Type 701155
Manufacturer’s declaration
_최대 SIL3수준으로 구현하는 방폭버전 안전솔루션
■
■
_JUMO safetyM STB/STW은 하류안전장치시스템을 제어하는 출력신호가 있습니다.
_ 다운스트림 시각화, 제어, 문서화를 위한 추가 출력신호도 적용가능합니다.
_전원 공급을 위한 보조에너지가 별도 요구됨
JUMO Engineering– system solutio
Personalized consulting
and support
Individual and market-oriented
solutions
Wide range of technologies
Decades of experience
Renewable energy
Mechanical
engineering
Pharmaceutical
engineering
Chemical industry
Water and waste-
water engineering
Industrial furnace
construction
Food technology
Railway technology
Shipbuilding
Heating and air-
conditioning industry
Control
Recording
Monitoring
Automation
Pressure
Humidity
Flow
Level
Analytical
measurement
technology
Temperature
Project management
Feasibility analysis
Product requirements
specifications
Project planning
Startup
Training
Service and maintenance
concepts
Technical support
Training courses and workshops
Implementation concepts
On-the-job training
se
ns
ors
+ a
uto
mat
ion
Processes
Ind
us
trie
s
Service
Expertise
JUMO엔지니어링-시스템솔루션
JUMO GmbH & Co.KG의 새로운 서비스 영역인 JUMO Engineering은 전문지식과 업계 관련 경험을 결합하였습니다. JUMO의 엔지니어 및 기술자는 고객의 특정 요구 사항을 기반으로 일관된 맞춤형 솔루션을 개발합니다. JUMO 엔지니 어링팀은 고객과의 초기 접촉 및 맞춤형 솔루션 개발에서 성공적인 완료에 이르기까지 고객을 위한 맞춤식 지원 및 조언 의 중요성을 믿고 있습니다. 다양한 산업 응용 프로그램을 수행 할 때 우리는 항상 고객의 이익을 최대화하여 최적의 결 과를 얻기 위해 노력합니다. JUMO의 혁신적인 엔지니어링 서비스는 우리가 이 목표를 달성 할 수 있게 해줍니다.
38 39
Ex Devices
ATEX Sensors Automation JUMO Safety Performance JUMO Engineering
Innovative system solutions which specific expertise
_ 전문가와 함께하는 혁신적인 시스템 솔루션
JUMO는 항상 제품 개선을 위해 고객의 의견에 귀 기울이며 이것은 우리의 새로운 발전에 반영 되었습니다. 우리는 광범위하고 복합적인
작업에 대해 고객맞춤형솔루션을 제공하는 동시에 우리의 포트폴리오를 확장할 수 있는 발전의 기회로 삼고 있습니다.
JUMO Engineering과 그에 따른 서비스 범위는 이 포괄적인 접근방식을 완성합니다.
In a nutshell_요 약
Your advantages_장 점
Our services_우리의 서비스
실행 가능성 분석
제품 요구사항/데이터시트를 포함한 기술적인 개념 생성
완벽한 프로젝트 계획 및 문서화
PLC 프로그래밍, 시각화, 네트워크 기술 등을 포함한
프로젝트계획
지속적인 프로젝트 관리
현장 스타트업
교육 및 지원
고객을 위한 특별한 기술 시스템 솔루션 개발
모든 측정 및 자동화 장치에 대한 JUMO의 광범위한
전문기술
숙련된 전문가를 통한 글로벌 지원
개별요구사항과 어플리케이션에 적합한 유연하고
맞춤화된 솔루션
정확하고 신속한 커뮤니케이션 채널 :시간을 절약하고 실수를 예방할 수 있습니다!
유연성을 최대화하기 위해 고도로 개발된 전문 기술 :완전히 신뢰할 수 있고 안전한 프로젝트 계획의 이점을 누릴 수 있습니다!
수십 년 동안 자체로 입증된 기술로 인해 감소된 정지 시간 :결과적으로 우수한 플랜트 가동성 및 프로세스 안정성을 얻을 수 있습니다!
www.jumo.net
PR
00
03
0 K
R/0
03
40
96
6/V
3
www.jumokorea.com