EWS!221! Instructions!on!how!to!get!your!iPad,!iPad!mini ... · !!!!!EWS!221!...
Transcript of EWS!221! Instructions!on!how!to!get!your!iPad,!iPad!mini ... · !!!!!EWS!221!...
EWS 221
The Instructions below will help you with turning on the SMART Board and Apple TV.
1. Use the wall switch to lower screen.
2. Turn on projector. 3. Select input using projector remote. Press the HDMI
button (6) and you should see the computer screen. Press the Computer 1 Button (1) and the Apple TV should appear on the screen.
a. Computer = HDMI b. Apple TV = Computer 1
4. The projector remote controls volume of the computer and
the Apple TV.
For any questions or assistance with the SMART Board or Apple TV, Call 870-‐972-‐3934 or E-‐mail [email protected].
Instructions on how to get your iPad, iPad mini, iPhone to show up on the screen (Mirroring):
1. Make sure that your device is connected to Wi-‐Fi (ASTATE SECURE). 2. Slide to unlock your screen, then press the home button twice and you will see a screen that looks like the image
3. Next swipe the bottom section to the right and you will see an image that looks like
4. Swipe the bottom section to the right one more time and your screen should look like this
5. Next press the round Icon on the very right (Mirroring Icon).
6. A screen should appear that looks like the image below. You will then click EWS221. You will get an option to turn on Mirroring for your device. Swipe this to ON.
7. You will see an onscreen passcode on the SMART board. Type the 4-‐digit passcode in your device. This could have a slight delay of 10-‐15 Seconds. Once the passcode is in, your device should be mirroring to the screen. *Note if this does not work and your device is not appearing on the screen repeat step 6.
8. When you are finished mirroring your device you will go back to the mirroring
icon.
9. Then you will click on the very top option, which should say the name of your device (iPad, iPad mini, iPhone).