EVERDIGM Top Hammer Drill T Seriesibbotsondrillingservices.com/onewebmedia/EVERDIGM T...EVERDIGM Top...
Transcript of EVERDIGM Top Hammer Drill T Seriesibbotsondrillingservices.com/onewebmedia/EVERDIGM T...EVERDIGM Top...
2
Top Hammer Drill T SeriesTable of Contents
1. Line Up & Specifications2. Key features3. Maintainability4. Safety devices5. Optional equipment6. Drilling Test Report7. Comparison8. Reference
T400 T450 T500
Boom & Mast Telescopic & Steel Mast Telescopic & Steel Mast Telescopic & Steel Mast
Hole diameter 64~102mm (2.5" - 4") 75~115mm (3" - 4.5") 75~127mm (3" - 5")
Drill steel T38, T45 (3,660mm) T45, T51 (3,660mm) T45, T51 (3,660mm)
Hole depth 25m 25m 25m
Rock drill EHD185 (18.5 kW)EHD210 (21 kW)
HC150 (21 kW)
HC150 (21 kW)
EHD210 (21 kW)
EngineTier 3 Tier 3 Caterpillar C7
(168 kW, 225 hp)Tier 3 Caterpillar C7
(168 kW, 225 hp)Tier 3 Caterpillar C7
(186 kW, 250 hp)
Tier 4 final Tier 4 Cummins QSB6.7 (160 kW, 215 hp)
Tier 4 Cummins QSB6.7 (160 kW, 215 hp)
Tier 4 Cummins QSB6.7 (194 kW, 260 hp)
Air compressor 6 m³/min (211 cfm) up to 10.5 bar
8 m³/min (282 cfm)up to 10.5 bar
11 m³/min (388 cfm)up to 10.5 bar
Dust collector(Suction capacity)
15.6m3/min@ max 8bar
28m3/min @ max 8bar
28m3/min @ max 8bar
Dimensions (Transportation)
Tier 3 H 2,860 x L 9,290 x W 2,350 H 2,860 x L 9,290 x W 2,350 H 2,860 x L 9,290 x W 2,350
Tier 4 final Under Development Under Development Under Development
WeightTier 3 13,700 kg 14,000 kg 14,500 kg
Tier 4 final Under Development Under Development Under Development3
1. Line Up & Specifications _ T Series
Top Hammer Drill T Series
T400 T450 T500
Boom & Mast Articulated Boom & Al Mast Articulated Boom & Al Mast Articulated Boom & Al Mast
Hole diameter 64~102mm (2.5" - 4") 75~115mm (3" - 4.5") 75~127mm (3" - 5")
Drill steel T38, T45 (3,660mm) T45, T51 (3,660mm) T45, T51 (3,660mm)
Hole depth 25m 25m 25m
Rock drill EHD185 (18.5 kW)EHD210 (21 kW)
HC150 (21 kW)
HC150 (21 kW)
EHD210 (21 kW)
EngineTier 3 Tier 3 Caterpillar C7
(168 kW, 225 hp)Tier 3 Caterpillar C7
(168 kW, 225 hp)Tier 3 Caterpillar C7
(186 kW, 250 hp)
Tier 4 final Tier 4 Cummins QSB6.7 (160 kW, 215 hp)
Tier 4 Cummins QSB6.7 (160 kW, 215 hp)
Tier 4 Cummins QSB6.7 (194 kW, 260 hp)
Air compressor 6 m³/min (211 cfm) up to 10.5 bar
8 m³/min (282 cfm)up to 10.5 bar
11 m³/min (388 cfm)up to 10.5 bar
Dust collector(Suction capacity)
15.6m3/min@ max 8bar
28m3/min @ max 8bar
32m3/min @ max 8bar
Dimensions (Transportation)
Tier 3 Under Development Under Development Under Development
Tier 4 final Under Development Under Development H 3,490 x L 11,890 x W 2,390
WeightTier 3 Under Development Under Development Under Development
Tier 4 final Under Development Under Development 14,800kg 4
1. Line Up & Specifications _ T Series Pro
Top Hammer Drill T Series
• New EHD Drifter & Montabert Drifter- Optimized rock drill for best drilling.
•Tier 4 Final Cummins Engine- Fully Integrated Electronic Controls.
- EcoFit™ Ultra-Low Emission Systems.
- Cooled Exhaust Gas Recirculation (EGR).
- World wide register and service availability
• Air Compressor- High effective Screw Rotor
- New Unloading System
- Easy serviceability and access to components
< EHD Drifter & Montabert Drifter>
<PDS series air compressor>
<Cummins QSB6.7 engine>
5
2. Key features
Top Hammer Drill T Series
• Features & Benefits- Hyd. damping & reverse percussion
- Simple design & less inner parts
- Low maintenance cost
- Reliable & durable structure
- Enhanced productivity
ITEM EHD160 EHD185 EHD210 HC150Base Rig T350 T400 T450 ,T500
Hole range 50~89mm 64~102mm 75~115mm 75~127mm
Drill steel T38 / T45 T38 / T45 T45 / T51
Impact power 16 kW 18.5 kW 21 kW
Impact frequency 50 Hz 50 Hz 50 Hz 41.7Hz
Rotation speed 170 rpm 170 rpm 140 rpm 130rpm
Hyd. Damping Std Std Std
Reverse Percussion N/A Std Std
Weight 236 kg 236 kg 236 kg 218 kg
Length 1284.5 mm 1284.5 mm 1284.5 mm 1,437mm 6
Drifter (EHD series & HC150)2. Key features
Top Hammer Drill T Series
7
Engine2. Key features
Model CUMMINS QSB6.7 (USA)
Power 260HP@2,200rpm/ 990Nm@1,500rpm
Aspiration Turbocharged After cooled
Cylinder 6 cylinder, 107mm Bore, 124mm Stroke
Displacement 6.7L
Emission Certification Tier IV Final
Top Hammer Drill T Series
Model Cat C 7 (USA)
Power 250HP@2,200rpm
Aspiration Turbocharged ATAAC
Cylinder 6 cylinder, 110mm Bore, 127mm Stroke
Displacement 7.2L
Emission Certification Tier III Stage A
8
2. Key features Load Sensing Hydraulic System _ Tier IV Engine Only
Top Hammer Drill T Series
Kawasaki K3VL80_BAxial Piston PumpMax Pressure: 350 barMax Continues Pressure: 320bar
Casspa PHP20.19 X 2Gear PumpMax Pressure: 280 barMax Continues Pressure: 250bar
Casspa KP30.34 + PHP20.19Gear PumpMax Pressure: 290 barMax Continues Pressure: 270bar
- Load Sensing Hydraulic System for Tier IV engine model- Kawasaki pump from Japan- Sustainable drilling at all engine RPM range
• Wide front view
• Easy to operate
• Functionally arranged
• Ergonomic Joystick system
• Engine Max RPM select mode
• Engine Power View-equipped
• Electrically controlled:- Percussion / Air / ARC
• Hydraulically controlled ;- Rotation / Feed / Boom / Travel 9
2. Key featuresControl System
Top Hammer Drill T Series
• LS system
• Anti-jamming system
• Super rotation system
• Collaring percussion system
• Integrated joystick control
• Fully-automatic rod changing
• Synchronized rod connection
<New control system>
<Integrated system Valve block>
10
Drilling Support System2. Key features
Top Hammer Drill T Series
• Simple structure and less moving parts
• Easier operation, fast and reliable.
• Fast rod changing mechanism
• Synchronized rod connection
•Two drum hose reel11
2. Key features RM(Roller & Magazine type) ARC Sysem
Top Hammer Drill T Series
2. Key features Articulated Boom _T Series Pro only
• Wider working range
• Easy and convenient drilling
• Increasing serviceable life and reducing
maintenance cost by Bondura® pivot pin
Top Hammer Drill T Series
13
Cylinder Drive Type
Strong and Durable Rope
Aluminum Mast
Slide Guide
Sheave Ass’y
1. Feed length : ~4150mm2. Feed cylinder stroke : ~2075mm3. Feed force : ~30kN
2. Key features Aluminum Mast and Cylinder-type Drilling Feed System _ T Series Pro Only
• Aluminum mast with light weight, high strength and rigidity• Cylinder-type drilling feed system allows to reduce wear in the structureand improve service intervals
Top Hammer Drill T Series
5400
3300
10°
45°
500014
5000
WARNI NG
C AUT ION
W ARNI NG
CAUT ION
3300
S AF ET Y H EL ME T
S HA LL BE W OR N
H AND P RO TE CTI ON
S HA LL BE W OR N
F OO T P RO TE CT ION
SH ALL B E W OR NS HA LL BE WO RN
E AR PR OT EC TIO N
WARNI NG
CAUTI ON
Y ear of c ons truc tion
S ER N O.
S HA LL BE WO RN
E AR PR OT EC TIO N SA FET Y HEL ME T
S HA LL BE W OR N
H AN D P RO TE CT ION
SH ALL B E W OR N
F OO T P RO TE CT ION
SH AL L B E W O RN
M ode l
A ppr o⌧ tota l weig ht
M a⌧. relie f p ress ure
B it s ize
k g
b ar
m m
M ode l
A ppr o⌧ t ota l weig ht
M a⌧. relie f pr essu re
B it si ze
kg
b ar
m m
WARNI NG
CAUTI ON
Y ear of c ons truct ion
S ER N O.
MAX MIN
2. Key features Folding Boom - continued
Top Hammer Drill T Series
• Hour meter for rock drill- For exact maintenance period
• Urea tank and pump- For easy access and urea filling
• Auto lubrication oil system- Supplies lubricating oil to gears inside drifter
• Wide engine compartment- For easy access and serviceability
<Hour meter for Drifter>
< Auto lubrication oil system>
15
3. Maintainability
<Urea tank and pump>
<Service friendly engine compartment>
Top Hammer Drill T Series
• Emergency stop functions- Lever & button in cab- Emergency wire on mast
• Fire extinguisher in cab
• Emergency hammer in cab
• Cab guard-equipped
<Safety lever> <Emergency stop wire>
16< Fire extinguisher & Emergency hammer >
4. Safety devices
< Emergency stop switches > <Cab safety guard> <Rotating Beacon>
Top Hammer Drill T Series
Remote monitoring system
• GPS positioning• Performance & condition monitoring with GSM access• Remote control via World Wide Website
Drilling support system
• Hole depth and machine position indicating• Auto feed stop• Performance record & management
Water misting system
• Indispensable application in broken or unstable ground, soil.• Prevent hole crumbling and bit jamming during drilling.• Dramatically improve drilling efficiency and productivity.
Cold climate kit
• Engine start below -50°C temperature• Engine coolant heating system by diesel fuel• Auto timer embedded
17
5. Optional equipment
Top Hammer Drill T Series
Drilling depth and angle indicator
• Operator friendly• Simple sequence
Centralized greasing system
• BEKA lubrication system• Greasing over 50 points at one go
Triple grousers track
• Stable drive in flatland
Rearview camera & monitor
• Safe & convenient during backward movement
18
5. Optional equipment - continued
Top Hammer Drill T Series
19Everdigm/Magnum Confidential
Drilling Time for Starter Rod – jobsite data
Drilling time for a first work interval based on above data
Drilling records⇒ AVG 2’30” per single rod
Rod Changing Record⇒ AVG 25” per each single rod change
Drilling conditionModel
T500 Pro (#101)
Drifter
Montabert HC150(21kw)
Engine
Tier 4 final_QSB6.7193.8kw(260hp)@2,200rpm
Compressor
11㎥/min(388cfm)@10.5bar(149psi)
Bit; 5” Ballistic/Drop center/Retrac bit
Rods; T51 * 12 feet
Rock sort; Basalt
Location; Las Vegas, USA
Drill Depth(m)
Drilling Time(sec)
Rod Change Time(sec)
Total Drilling Time(sec)
Expected Drilling Speed(m/hr)
3.66 199 24 223 59.1
Top Hammer Drill T Series
20
Basic drilling condition- AVG Max. Engine RPM; 2,000 - AVG. Drilling Depth; 12~42feet- Bit; 5” Ballistic/Drop center/Retrac bit- Rods; T51 * 12 feet- Rock sort; Basalt
⇒ Max. Fuel consumption; 27.7 L/hr
⇒ AVG. Fuel consumption; 25.5 L/hr
***) Comparing Atlas copcoT50, 24 L/hr is 6.25% higher however,
Top Hammer Drill T Series
23
History
1994 Beginning
First Top Hammer Drill in Korea by DHI
2007 Changes
Merged by EVERDIGM
2010 New Start
NEW THD Rig ECD Seriesby EVERDIGM
2012 Development
NEW Diamond Core Drilling Rig ECR Series
2014 Upgrade
NEW THD Rig T SeriesNEW DTH Rig D Series
1994 First Top Hammer Drill in Korea
Tech Cooperation with Toyo
1997 Tech Cooperation for rock drill with Taisei, Japan
2001 Rock Drill Localization, ED-100
2005 New Top Hammer DrillRocky D-10
2007 Merged by EVERDIGM
2010 Upgraded Rock Drill ED-150
2010 New THD Rig ECD Series, ECD40, by EVERDIGM
2011 Launch of ECD35
2012 Launch of ECD45
2012 Launch of Diamond Core Drill Rig
ECR Series
2012 Start of Rock Tool Business
2014 Launch of New THD Rig T-Series Launch of New DTH Rig D-Series
2016 1st Tier IV Engine Rig T500
Appendix
SortEVERDIGM
T400Atlas Copco
Power ROC T30SandvikDX680
FurukawaHCR900
EngineCAT C7(Tier III)
225HPCummins / QSB4.5
160HP 200HPCAT C7225HP
Compressor6m3/min10.5bar
5.8m3/min10bar
6.2m3/min10bar
6.1m3/min10.3bar
Rock Drill EHD185 / 18.5kW COP164016kW
HL 65017.5kW
HD70914.2kW
Hole SizeDrill Depth
102mm25m
89mm25m
102mm22m
102mm22m
Specification ComparisonAppendix
Sort EVERDIGMT450
Atlas CopcoFlexi ROC T35
SandvikDX700
FurukawaHCR1200
Engine CAT C7(Tier III)225HP
Cummins / QSB6.7190HP
CAT C7225HP
CAT C7225HP
Compressor 8m3/min10.5bar
7.7m3/min10bar
8.1m3/min10bar
8.1m3/min10.3bar
Rock Drill HC150RP(Montabert)21kW
COP184018kW
HL 71019.5kW
HD71218.2kW
Hole SizeDrill Depth
115mm25m
115mm25m
115mm22m
102mm22m
Specification ComparisonAppendix
Sort EVERDIGMT500
EVERDIGMT500
Atlas CopcoFlexi ROC T45
SandvikDX800
FurukawaHCR-1500
EngineCAT C7(Tier III)
250HP
Cummins QSB6.7,Tier4F,
260HP@2,200rpm
Caterpillar C9325HP@1,900rpm
Caterpillar C7250HP@rpm
Caterpillar C9348HP@2,200rpm
Compressor 11m3/min10.5bar
11m3/min10.5bar
13.4m3/min12bar
9.6m3/min10bar
13.5m3/min10.3bar
Rock DrillHC150RP(Montabert)
21kWHC150RP(Montabert)
21kWCOP2560
25KwHL810T21Kw HD715Ⅱ
Hole SizeDrill Depth
127mm25m
127mm25m
5.5 (140) 5 (127) 5 (127)
Specification ComparisonAppendix