Eutectic Phase Diagram
description
Transcript of Eutectic Phase Diagram
Eutectic Phase Diagram
http://www.tulane.edu/~sanelson/geol212/2compphasdiag.html
NOTE: at a given overall composition (say: X), both the relative amounts of the two phases (a,b or c,d) AND the composition of one (or possibly both) depend on the temperature
From J.R. Waldram“The Theory of Thermodynamics”
Fe-C Phase DiagramAustenite: gFerrite: dMartensite: metastable phase formed by quenching g into the 2-phase region.
From T. B. MassalskiAtlas of Binary Phase Diagrams
Solid lines show Fe-C equilibrium Phase Diagram, Dashed lines show metastableFe-Fe3C diagram
Al-Zn phase diagram
unstable
metastable
The pictures on the left show electron micrographs of alloys “Quenched Al-Zn alloys” The samples of different composition (horizontally) wer cooled quickly to lower temperature and then the pictures were taken as a function of time (vertical). The left column is a quench into the metastable portion of the diagram whereas the middle went into an unstable area of the phase diagram. Notice the different morphology of the phase separated regions as the alloy is allowed to approach equilibrium. Nucleation and growth (left) vs. “spinodal decomposition” (center)
Spinodal Decomposition (unstable part of a binary phase diagram)
http://en.wikipedia.org/wiki/Spinodal_decomposition
See the wikipedia article on this for a nice “movie” of how the microstructure evolves.
Proposed Nuclear Matter phase diagram
http://www.kfa-juelich.de/nic/Publikationen/Broschuere/Elementarteilchenphysik/hadron.jpg
Quark Gluon plasma (RHIC)
http://www.google.com/imgres?imgurl=http://gruppo3.ca.infn.it/usai/cmsimple3_0/images/PhaseDiagram.png&imgrefurl=http://gruppo3.ca.infn.it/usai/%3FResearch:Phase_Transition&h=771&w=1042&sz=200&tbnid=0xQaMFwZufgtxM:&tbnh=111&tbnw=150&prev=/images%3Fq%3DQuark%2Bgluon%2Bplasma%2Bphase%2Bdiagram&usg=__OGqEE_0lIz0fOUddpDFtuCIgeG8=&ei=4HXMS8GkBILw9AS_uoTCBg&sa=X&oi=image_result&resnum=3&ct=image&ved=0CAoQ9QEwAg
Critical Opalescence
A somewhat more “dramatic”, but less useful version of the same thing may be seen at the site:http://www.youtube.com/watch?v=2xyiqPgZVyw&feature=related
At the critical point in a fluid, you get large fluctuations in the density (because the energy cost of creating density changes goes to zero). Consequently, the fluid scatters light very well right at the transition. A goo example of this can be seen in the You-tube video:
http://www.youtube.com/watch?v=OgfxOl0eoJ0
A demonstration with a clearer explanation (by Martin Poliokoff of U. Nottingham) of what is happening, but less compelling video, may be seen at:http://www.youtube.com/watch?v=yBRdBrnIlTQ&feature=fvw
Ferromagnetism
“unmagnetised” Ferromagnet
“Magnetised” Ferromagnet
Ferromagnetic Iron
Ferromagnetic Materials
If the sample is small enough, or the specific magnetization big enough, the domains may be arranged is a less-that-random arrangement that leads to zero net magnetization for the sample (thereby minimizing the energy associated with the stray field). The above figure from the text demonstrates the typical pattern for a small needle (whisker) of material.
Superfluid Transition: 4He
The above figure is taken from:http://hyperphysics.phy-astr.gsu.edu/Hbase/lhel.html#c2
Interesting video of the properties of superfluid He is available at:http://www.youtube.com/watch?v=2Z6UJbwxBZI
From Zemansky “Heat and Thermodynamics”
From Chaikin and Lubensky:“Principles of Condensed Matter Physics” 1995.
MFT
Critical Exponents
From P. Chaikin and T Lubensky“Principles of Condensed Matter Physics”
Notice that convention allows for different exponents on either side of the transition, but often these are found to be the same.
From Kadanoff et al. Rev. Mod. Phys. 35, 395 (1967)
NOTE: similar b values for magnetismAnd gases!
Ising Model• Consider a lattice on which each site is occupied by either a + or a – (up
or down spin to model magnetism, A or B element to model a binary alloy etc.).
• Label each such state as si (for site I, two possible values).• We assume ONLY nearest-neighbor interactions, and describe that
interaction with a single energy scale J.• The total configurational energy is then: E = -J Snn(si sj)• In this model J>0 suggests like neighbors are preferred (lower energy if si
and sj are of the same sign)• Exact solutions have been found for 1 and 2 dimensions, not yet for 3
dimensions.• Applications:
• Magnetism (both ferromagnetism and antiferromagnetism)• Binary alloys while assuming random arrangements of atoms (Bragg-
Williams model) shows phase separation for J>0.• Binary alloys with correlations between bonding and configuration
treated via the law of mass action (i.e. bonds forming and breaking; the “Quasi-chemical” approximation) can show order-disorder transitions as well as phase separation etc.
Order-Disorder Transition
http://cimewww.epfl.ch/people/cayron/Fichiers/thesebook-chap5.pdf
Order-Disorder Transition
http://cimewww.epfl.ch/people/cayron/Fichiers/thesebook-chap5.pdf
In this case, once any site has a slightly higher probability for having Cu (or Zn) rather than the other, the symmetry is broken, new Bragg peaks start to appear, and the order parameter is non-zero.
http://cimewww.epfl.ch/people/cayron/Fichiers/thesebook-chap5.pdf
b b’
Universality Classes
From P. Chaikin and T Lubensky “Principles of Condensed Matter Physics”
Theory suggests that the class (i.e. set of exponents) depends on spatial dimensionality and symmetry of both the order parameter and interaction (and range of the latter as well), but not on the detailed form or strength of the interactions