+2.36

-1.97

0spindleaxis

���������������������

�����������������������������������������

Productivity is Standard – Thousandsof Dollars of Features Included

�����������

• 18iT Control

• Color Graphics Screen with 10.4”Color LCD

• Full Keypad with Custom Touch Keys

• Macro A & Macro B

• Extra Memory

• RS232/PCMCIA Interface

• G54 - G59

• G80 - G89

• Proprietary package of G-codeCycles: (deep drilling with rotarytools, multiple threading, multiple

trapezoidal threading, chainedthreading, oil lubricationchannels, polygon contourmilling, circular contourmilling)

• Disc brake on Main Spindle

• RIgid Tapping on C, Y

• Tool Life management

• SBS Tool Load Monitoring

• G10 Programmable Input

• Chip Conveyor

• Automatic Tool Probe

• Live Tools (B658L, B658SL, B658LYand B658SLY)

• Standard Tooling

• Scale Feedback (B658SL, B658LYand B658SLY) on X, Y, C

• Air-Conditioned Electronics

• Polygonal Turning

• Unexpected Disturbance Detection

• Servo Turret Set-up Assistance

With the Y-axis the B658LY and B658SLY combine the capabilities of both a lathe and a 4-axis machining center.

1. Flat milling in repeated cuts2. Irregular slot milling (roughness - finishing)3. Key-way milling4. Thread milling5. Drilling and milling grid holes6. Milling of an accurate key-way7. Enables EGS (Eurotech Gang-tool System)8. Ability to put over 40 cutting tools on one 12-station turret9. Reduces set-ups, while maintaining cycle time speed10. Improves accuracy by eliminating tool change deviation

STANDARD FEATURES

���

���

����������� ����������

���

���

����������� ����������

Spindles

The heavy duty Eurotechcartridge type spindle is

driven by a motor coupledwith a gear box. Also, the

combination of the rigidheadstock and spindle

construction with the hightorque and power avail-

able at low rpm allowshigh chip removal rates

and maximum accuracy.

Over $60,000 In Control Options -Included to ImproveProfitability

CNC UNIT MOD. FANUC18i-T ,10.4” Color LCD, Alphanumeric

full-keyboard, Eurotech operator panel featuring softkeys.

This system moni-tors the loading ofthe most heavilyused tools: e.g. 1stOP. cutting tools,roughing tools,drills or U-drills. Itensures safe auto-matic machining with limited operator presence.

This special softwaredetects the abnormalload created by a col-lision during rapidtraverse or within themachining process.When a collisionoccurs, spindle rota-tion is stopped andthe axis movement ishalted thus dampen-ing the interference and limiting damage to the tooling. ������������������������������������������������

Graphical analysis of a crash and reactionof the axes and spindle drives

ALARMAXIS ABSORPTION

back traverse

interference point

AXIS SPEED

Approximate diagram

DAMAGE PROTECTION (air bag)SBS: EUROTECH SAFETY SOFTWARE TOOL LOAD MONITORING

Spindle Diagrams

�������� ��

������������ ����������� ����������

4 - 5