EUROPA WHIRLPOOL SPA SYSTEMS SPA-JET LTD Clearwater,...

1
SPA-JET LTD EUROPA WHIRLPOOL SPA SYSTEMS Clearwater, MultiPoint, Combintion & AirSpa Manufacturers & Distributors With the Europa Whirlpool and Air Spa systems, you can experience the luxury of having your very own spa in your bathroom. The systems can be fitted to most types of baths and come in four different varieties. Ÿ Europa ClearWater Spa: Has up to eight large directional jets placed around the sides of the bath. Ÿ Europa MultiPoint Spa: Has up to 16 small fixed jets placed around the sides of the bath. Ÿ Europa Combination System: Has a mixture of 4 Multi-Point jets and 6 Clearwater jets for a total of ten jets. Ÿ Europa AirSpa: Has up to 18 jets placed on the base of the bath. The AirSpa can also be installed in conjunction with any of the other three systems into a single bath to produce a dual configuration. All systems have the option of an electronic control touch pad and underwater lighting. Q. Can a Europa whirlpool / Air Spa system be fitted to any bath. A. Any of the systems can be fitted to the vast majority of baths. The exceptions are free standing baths (which would be unable to occlude the pipework) as well as metal baths. Q. Do I need to use a bath supplied by Spa-Jet. A. No. Spa-Jet will fit a whirlpool system to any compatible bath both new or old. Q. What plumbing is required for my whirlpool spa? A. No extra plumbing is required at all. The whirlpool pump and pipework are fitted to the bath and self-contained. Just install your bath as normal. Q. What about the electrical connection? A. You will need a 13amp connection to your whirlpool pump to the electrical supply. This should be wired through a "earth leakage circuit breaker (ELCB)" with a 13 milliamp trip current and a pull cord or spur switch. Q. Is it safe having an electrical connection to the bath? A. There is no direct electrical connection to the bath. The switch on the bath is air operated and is connected to the pump via a plastic pneumatic tube. In the case of the electronic control pad option, a low voltage connection is made between the pump and control pad. This makes the system 100% electrically safe. Q. Will baths salts, bubble bath or other bathing products damage my system? A. No. Ordinary bathing products will not damage your system. However, when using products that foam up such as bubble bath, it is important to use only a very small amount. A pin drop will usually suffice otherwise a large excess of foam may be produced. Example ClearWater System: Available with 5, 6, 7 or 8 large directional jets. Example MultiPoint System: Available with 12 or 16 fixed jets. Example AirSpa System: Available with 12 or 18 jets. 10

Transcript of EUROPA WHIRLPOOL SPA SYSTEMS SPA-JET LTD Clearwater,...

  • SPA-JET LTDEUROPA WHIRLPOOL SPA SYSTEMSClearwater, MultiPoint, Combintion & AirSpa Manufacturers & Distributors

    With the Europa Whirlpool and Air Spa systems, you can experience the luxury of having your very own spa in your

    bathroom. The systems can be fitted to most types of baths and come in four different varieties.

    Ÿ Europa ClearWater Spa: Has up to eight large directional jets placed around the sides of the bath.

    Ÿ Europa MultiPoint Spa: Has up to 16 small fixed jets placed around the sides of the bath.

    Ÿ Europa Combination System: Has a mixture of 4 Multi-Point jets and 6 Clearwater jets for a total of ten jets.

    Ÿ Europa AirSpa: Has up to 18 jets placed on the base of the bath. The AirSpa can also be installed in conjunction with

    any of the other three systems into a single bath to produce a dual configuration.

    All systems have the option of an electronic control touch pad and underwater lighting.

    Q. Can a Europa whirlpool / Air Spa system be fitted to any bath.

    A. Any of the systems can be fitted to the vast majority of baths. The exceptions are free standing baths (which would be unable to occlude the pipework)

    as well as metal baths.

    Q. Do I need to use a bath supplied by Spa-Jet.

    A. No. Spa-Jet will fit a whirlpool system to any compatible bath both new or old.

    Q. What plumbing is required for my whirlpool spa?

    A. No extra plumbing is required at all. The whirlpool pump and pipework are fitted to the bath and self-contained. Just install your bath as normal.

    Q. What about the electrical connection?

    A. You will need a 13amp connection to your whirlpool pump to the electrical supply. This should be wired through a "earth leakage circuit breaker (ELCB)"

    with a 13 milliamp trip current and a pull cord or spur switch.

    Q. Is it safe having an electrical connection to the bath?

    A. There is no direct electrical connection to the bath. The switch on the bath is air operated and is connected to the pump via a plastic pneumatic tube.

    In the case of the electronic control pad option, a low voltage connection is made between the pump and control pad. This makes the system 100%

    electrically safe.

    Q. Will baths salts, bubble bath or other bathing products damage my system?

    A. No. Ordinary bathing products will not damage your system. However, when using products that foam up such as bubble bath, it is important to use

    only a very small amount. A pin drop will usually suffice otherwise a large excess of foam may be produced.

    Example ClearWater System: Available with 5, 6, 7 or 8 large directional jets.

    Example MultiPoint System: Available with 12 or 16 fixed jets.

    Example AirSpa System: Available with 12 or 18 jets.

    10

    Page 1