Eurocodes.pdf

7/29/2019 Eurocodes.pdf

1/5

List of Superseded British Standards that are to be withdrawn on 31 March2010:

Loading for buildingsBS 6399-1:1996 Loading for buildings. Code of practice for dead and imposed

loadsSuperseded by EN 1991

BS 6399-2:1997 Loading for buildings. Code of practice for wind loadsSuperseded by EN 1991

BS 6399-3:1988 Loading for buildings. Code of practice for imposed roofloadsSuperseded by EN 1991

Structural use of concrete

BS 8110-1:1997 Structural use of concrete. Code of practice for design andconstructionSuperseded by EN 1992

BS 8110-2:1985 Structural use of concrete. Code of practice for specialcircumstancesSuperseded by EN 1992

BS 8110-3:1985 Structural use of concrete. Design charts for singly reinforcedbeams, doubly reinforced beams and rectangular columnsSuperseded by EN 1992

BS 8007: 1987 Code of practice for design of concrete structures for retainingaqueous liquidsSuperseded by EN 1992

Structural use of steelBS 5950-1:2000 Structural use of steelwork in building. Code of practice fordesign. Rolled and welded sectionsSuperseded by EN 1993

BS 5950-2:2001 Structural use of steelwork in building. Specification formaterials, fabrication and erection. Rolled and welded sectionsSuperseded by EN 1994

BS 5950-3.1:1990 Structural use of steelwork in building. Design in compositeconstruction. Code of practice for design of simple and continuous compositebeamsSuperseded by EN 1994

BS 5950-4:1994 Structural use of steelwork in building. Code of practice fordesign of composite slabs with profiled steel sheeting

Superseded by EN 1994


2/5

BS 5950-5:1998 Structural use of steelwork in building. Code of practice fordesign of cold formed thin gauge sectionsSuperseded by EN 1993

BS 5950-6:1995 Structural use of steelwork in building. Code of practice fordesign of light gauge profiled steel sheetingSuperseded by EN 1993

BS 5950-7: 1992 Structural use of steelwork in building. Specification formaterials and workmanship: cold formed sectionsObsolescent

BS 5950-8:2003 Structural use of steelwork in building. Code of practice forfire resistant designSuperseded by EN 1993

BS 5950-9:1994 Structural use of steelwork in building. Code of practice forstressed skin designSuperseded by EN 1993

BS 449-2: 1969 Specification for the use of structural steel in building. MetricunitsSuperseded by EN 1993

BS 4604-1: 1970 Specification for the use of high strength grip bolts instructural steelwork. Metric series. General gradeSuperseded by EN 1993

BS 4604-2: 1970 Specification for the use of high strength grip bolts instructural steelwork. Metric series. Higher grade (parallel shank)Superseded by EN 1993

Structural use of timberBS 5268-2:2002 Structural use of timber. Code of practice for permissiblestress design, materials and workmanshipSuperseded by EN 1995

BS 5268-3:2006 Structural use of timber. Code of practice for trussed rafterroofsSuperseded by EN 1995

BS 5268-4.1:1978 Structural use of timber. Fire resistance of timberstructures. Recommendations for calculating fire resistance of timbermembersSuperseded by EN 1995

BS 5268-4.2:1990 Structural use of timber. Fire resistance of timber

structures. Recommendations for calculating fire resistance of timber studwalls and joisted floor constructions


3/5


BS 5268-5:1989 Structural use of timber. Code of practice for the preservativetreatment of structural timberObsolescent

BS 5268-6.1:1996 Structural use of timber. Code of practice for timber framewalls. Dwellings not exceeding seven storeysSuperseded by EN 1995

BS 5268-6.2:2001 Structural use of timber. Code of practice for timber framewalls. Buildings other than dwellings not exceeding seven storeysSuperseded by EN 1995

BS 5268-7.1:1989 Structural use of timber. Recommendations for thecalculation basis for span tables. Domestic floor joists


BS 5268-7.2:1989 Structural use of timber. Recommendations for thecalculation basis for span tables. Joists for flat roofsSuperseded by EN 1995

BS 5268-7.3:1989 Structural use of timber. Recommendations for thecalculation basis for span tables. Ceiling joistsSuperseded by EN 1995

BS 5268-7.4:1989 Structural use of timber. Ceiling bindersSuperseded by EN 1995

BS 5268-7.5:1990 Structural use of timber. Recommendations for thecalculation basis for span tables. Domestic raftersSuperseded by EN 1995

BS 5268-7.6:1990 Structural use of timber. Recommendations for thecalculation basis for span tables. Purlins supporting raftersSuperseded by EN 1995

BS 5268-7.7:1990 Structural use of timber. Recommendations for thecalculation basis for span tables. Purlins supporting sheeting or deckingSuperseded by EN 1995

Structural use of masonryBS 5628-1:2005 Code of practice for the use of masonry. Structural use ofunreinforced masonrySuperseded by EN 1996

BS 5628-2:2005 Code of practice for use of masonry. Structural use ofreinforced and prestressed masonry



4/5

BS 5628-3:2005 Code of practice for use of masonry. Materials andcomponents, design and workmanshipSuperseded by EN 1996

Geotechnics

BS 8002:1994 Code of practice for earth retaining structuresSuperseded by EN 1997-1

BS 8004: 1986 Code of practice for foundationsSuperseded by EN 1997-1

Structural use of AluminiumBS 8118-1:1991 Structural use of aluminium. Code of practice for designSuperseded by EN 1999

BS 8118-2:1991 Structural use of aluminium. Specification for materials,

workmanship and protectionSuperseded by EN 1999

BridgesBS 5400-1:1988 Steel, concrete and composite bridges. General statementSuperseded by EN 1990, EN 1991

BS 5400-2: 2006 Steel, concrete and composite bridges. Specification forloadsSuperseded by EN 1990, EN 1991

BS 5400-3:2000 Steel, concrete and composite bridges. Code of practice fordesign of steel bridgesSuperseded by EN 1993

BS 5400-4: 1990 Steel, concrete and composite bridges. Code of practice fordesign of concrete bridgesSuperseded by EN 1992

BS 5400-5:2005 Steel, concrete and composite bridges. Code of practice fordesign of composite bridges


BS 5400-6: 1999 Steel, concrete and composite bridges. Specification formaterials and workmanship, steelSuperseded by EN 1090-2

BS 5400-7:1978 Steel, concrete and composite bridges. Specification formaterials and workmanship, concrete, reinforcement and prestressingtendonsSuperseded by EN 1992


5/5

BS 5400-8: 1978 Steel, concrete and composite bridges. Recommendationsfor materials and workmanship, concrete, reinforcement and prestressingtendonsSuperseded by EN 1992

BS 5400-9.1 and 9.2 bearings - not affected

BS 5400-10C: 1999 Steel, concrete and composite bridges. Charts forclassification of details for fatigue

Towers, Masts and ChimneysBS 8100-1:1986 Lattice towers and masts. Code of practice for loading Codeof practice for loadingSuperseded by EN 1993

BS 8100-2:1986 Lattice towers and masts. Guide to the background and use

of Part 1 'Code of practice for loading'Superseded by EN 1993

BS 8100-3:1999 Lattice towers and masts. Code of practice for strengthassessment of members of lattice towers and mastsSuperseded by EN 1993

BS 8100-4:1995 Lattice towers and masts. Code of practice for loading ofguyed mastsSuperseded by EN 1993

BS 4076:1989 Specification for steel chimneysSuperseded by EN 1993

Eurocodes.pdf

Documents

Transcript of Eurocodes.pdf