ETX-5300A 2013 Slide 1 ETX-5300A Release version 1.0 GA.
-
Upload
loraine-barber -
Category
Documents
-
view
241 -
download
5
Transcript of ETX-5300A 2013 Slide 1 ETX-5300A Release version 1.0 GA.
ETX-5300A 2013 Slide1
ETX-5300A
Release version 1.0 GA
ETX-5300A 2013 Slide2
ETX-5300A Main Market Messages
ETX-5300A is a carrier grade Access Aggregation Switch
ETX series is a real end-to-edge access solution
RAD access solution reduces Total cost of ownership
Device
SolutionEconom
ies
ETX-5300A 2013 Slide4
Why We Think ETX-5300A is a Winner
• Highest capacity-to-size ratio in the market• Best mechanisms for network efficiency• Reduce costs by freeing up PE capacity, cutting price per link• Complements RAD’s ecosystem• Warm reception by tier-1 carriers
ETX-5300A 2013 Slide5
ETX-5300A: Ethernet Aggregation + Pseudowire Gateway
17.3”
3U
14.9”
2 x Main Card, each supporting:• 4 x 10 GbE XFP (Max of 8)• 1+1 port or card redundancy
4 x I/O cards, each supporting:•20 x 1 GbE SFP/UTP (Max of 80)•2 x 10 GbE XFP (Max of 8)•4 x Ch. OC3 PWE3 (Max of 16)
Environment:• 0°C to 50°C
Timing:• IEEE 1588-2008: M,S & TC• Sync-E: External & Master• 1PPS, TOD & 10 MHz for phase
and frequency lock
Architecture:• E-line; E-LAN• OAM 802.1ag/Y.1731 per flow• Port redundancy (APS/LAG)• Ring G.8032 (2 x 10 GbE,
10 x 1GbE)
Chassis:• 3U Height• 4 I/O slots – 20 GbE slot• Redundant main switching
card with 4 x 10 GbE ports
Power Supply:• Redundant PSU AC/DC
Performance:• 200 GbE switch fabric• 100 GbE switching capacity
ETX-5300A 2013 Slide6
ETX-5300A Front View Description
4 x 10GbE XFP fully redundant
Alarm output connector
Fan Module
Secondary Main Card
Primary Main Card
20 x 1GbE Elec I/O card
20 x 1GbE Opt SFP I/O card
Air Filter
Redundant PSU (DC/AC Outlet)
Clocking Interfaces
Front View Access
ETX-5300A 2013 Slide7
ETX-5300A Scale
• ETX-5300A features the smallest form-factor and highest capacity-to-size ratio in the market for aggregation devices
• It can be cascade 12 devices in standard ETSI rack mount with all front access cable management
Reaching 960 x GE ports + 96 x 10GE ports in a lowest power consumption = less than 6KW
ETX-5300A 2013 Slide8
Markets & Applications
ETX-5300A 2013 Slide9
Carriers and Operators
• SLA-based business Ethernet and cloud connectivity• Wholesale and carrier-to-carrier (E-NNI) connectivity• Mobile backhaul• Legacy TDM service emulation
ETX-5300A 2013 Slide10
Private Networks
Seamless migration from SDH/SONET to PSN: • Utilities• Transportation• Government• Healthcare• Education
ETX-5300A 2013 Slide11
SLA-based ServicesE2E Traffic management
AccessAggregation NetworkAccess Aggregation“Pre-Aggregation”
Access
ETX-203AX ETX-203AM
ETX-205A ETX-205A
ETX-5300AETX-5300A
Metro + Core
Access Aggregation“Pre-Aggregation”
Optimizing Service Experience in the Access Network
ETX-220AETX-220A ETX-220A
ETX-5300A 2013 Slide12
Application Scenarios
ETX-5300A 2013 Slide13
Access Aggregation
• Complete Access Solution– OAM– TM– Timing– SDH/ SONET Replacement– PW (Legacy Migration)
First MileMiddle Mile
Access Segment
Core
MetroETX-5300A
ETX-220A ETX-220A
ETX-220A
1 GbE (LAG)
10 GbE (LAG)
FE/GbE
ETX-205A
ETX-220A
ETX-220A
ETX-203AXETX-203AM
10 GbE (LAG)
1 GbE (LAG)
10 GbE
10 GbE
10 GbE
10 GbE
10 GbE Ring
GbE / 10 GbE Agg UNI 10 GbE LAG to PE NNI CIR BW Modules
6 x 10 GbE 2 Inter-card LAG 10GE 2 x Main
6 x 10 GbE 20 x 1 GbE 2 Inter-card LAG 10GE 2 x Main
1 x GE I/O
12 x 10 GbE 4 Inter-card LAG 20GE 2 x Main4 x 10 GE I/O
8 x 10 GbE40 x 1 GbE 4 Inter-card LAG 20GE
2 x Main2 x 10GE I/O2 x 1GE I/O
80 x 1 GbE 4 Inter-card LAG 20GE 2 x Main4 x 1GE I/O
ETX-5300A 2013 Slide14
Access Aggregation
• Ring Access Aggregation– G.8032v2 support up to 16 rings with 32 members in a ring– SDH and TDM PW Migration
First MileMiddle Mile
Access Segment
Core
Metro
ETX-5300A
10 GbE Ring
ETX-5300A
1GbE Ring
ETX-5300A
10 GbE Ring
ETX
ETX
ETX
ETX
ETX-5300A 2013 Slide15
Ethernet & TDM PW
Traffic
GbE/10 GbE
RADview
1,2,4,8 or 16 E1/T1
2 x FE / GbE
IPmux-24/IPmux-216
Ethernet & TDM Pseudowire
ETX-5300A*
Up to: 16 OC-3/STM-1
MP-4100/2100
MPW / ML-IP
160 x T1/E1160 x analog phones120 a serial interfacesand more…
ETX+MiTOPT1/E1 or T3/E3
2 x FE / GbE
GbE/10 GbE
IPmux-1E 4 FXS/FXO/E&M/BRI
8, 16 or 32 E1/T1
8 x FE / GbE
ETX-220A
4 or 8 E/T1
5 x FE / GbE
ETX-205A*
ETX-5300A Sample Configurations
TDM/ SONET
IP/ETH
Ethernet, IP or MPLS
Ports Aggregated10 GbE LAG Groups (Card Protection)
ModulesReq.Ch. C3/STM1 Ethernet
- 6 x 10GbE 1 (2 ports) 2 x Main
4/2+2 6 x10GbE 1 (2 ports) 2 x Main1 x TDM I/O
8/4+4 6 x 10GbE 2 (4 ports) 2 x Main2 x TDM I/O
8/4+4 40 x GbE6 x 10GbE 2 (4 ports)
2 x Main2x TDM I/O2 x GbE I/O
16/8+8 6 x 10GbE 2 (4 ports) 2 x Main4 x TDM I/O
ETX-5300A 2013 Slide16
Mobile Backhaul solution
IP/MPLS
PEPE10 GbE
ETX-205A
GbE Up to 20 UnitsETX-220MP
ETX-205A10 GbE10 GbE
RouterMME ETX-5300A
G.8032v2
ETX-5300A
RAD Access solution for MobileTiming feeder
ETX-205A
ETX-205AETX-205A
ETX-5300A 2013 Slide17
Product Description
ETX-5300A 2013 Slide18
ETX-5300A Fully Redundant Platform
• 3U fully redundant service box:– Up to 80 x GbE & 8 x 10GE / 16 x 10GE– Up to 16 STM-1 & 8 x 10GE
• Non-blocking architecture with wire speed packet forwarding for all packet sizes• Ethernet and TDM Services
– E-Line (EPL and EVPL), E-LAN (EP-LAN and EVP-LAN)– TDM / TDM PW / MEF8 & UDP/IP encapsulation
• Ring & Linear topologies• Fully redundant chassis including 50 ms switchover• VLAN Forwarding & manipulation• Hierarchical Traffic management • Network Termination Unit like packet classification• Timing over packet – 1588v2, M&S Sync-E
ETX-5300A 2013 Slide20
Supported Cards ETX-5300A Release 1.0
Card name Technology Interop with Description
E5-MC4Main system card with common logic and 4 x 10GbE XFP
Any MEF compliant device
Main card with Packet forwarding processing engine, common Logic & Clock unit. On card 4 x 10GbE XFP interfaces
E5-10GB-2X
2x 10GE XFP Optical port service card
Any MEF compliant device ETX,
Ethernet IO card with 2 x 10GE optical XFP ports, Non blocking architecture, SyncE & IEEE-1588-2008 on all ports
E5-GBE-20O
20 x 1GbE SFP Optical ports service card
Any MEF compliant device ETX, IPMux
Ethernet IO card with 20 x 1GbE optical ports, Non blocking architecture, SyncE & IEEE-1588-2008 on all ports
E5-GBE-20E 20 x 10/100/1000 Electrical ports service card
Any MEF compliant device ETX, IPMux
Ethernet IO card with 20 x 1GbE Electrical ports, Non blocking architecture, SyncE & IEEE-1588-2008 on all ports
E5-cTDM-4 Ch STM-1/OC3 service cardAny Sonet/SDH with Ch STM-1/OC3 device
Channelized TDM card with 4 chOC-3/chSTM-1 interfaces, user configurable SONET/SDH mode
19” 3U4 x 10GbE & 80 x GbE
/16 x STM1/OC3
ETX-5300A 2013 Slide21
• Timing options• 3 CLK domains• Station clock Input & Output
• 64K/1.544/2.048 Bal/Unbal/Square
• GPS I/F• Input & Output• 10MHz • 1 PPS• TOD
• Main Card type:• On card 4x10GE Interfaces• No on card 10GE Interfaces
Main System Card
• The main card is the core packet processing unit of the ETX-5300A machine
– At least one main card is required in each shelf
• The main card supports: – Packet forwarding processing engine– Shelf and host/device management– Clock unit– On card 4 x 10GE XFP interfaces– 4096 EVCs
ETX-5300A 2013 Slide22
Ethernet IO Card
• The Ethernet IO supports 2 x 10 GbE or 20 x 1 GbE ports with either optical or copper interfaces (copper option for the 20 x 1GE)
• Non blocking architecture based on RAD FPGA that provides full 20 GbE
• 2K flows are supported on each IO card• SyncE & IEEE-1588-2008 on all ports • P2P & MP2MP services are supported• Link Aggregation between ports and cards
• Main Card type:•2 x 10GE XFP I/F •20 x 1GE Optical SFP I/F•20 x 1GE Electrical UTP I/F
ETX-5300A 2013 Slide23
Multi-Service IO Card
• The Multi-Service IO card supports – 4 Ch. OC-3/Ch. STM-1 interfaces– 4 x Ch. OC-3/Ch. STM-1 or
Ch. OC-12/Ch. STM-4 – II phase– Ch. OC-48/Ch. STM-16 – II phase
• Per card, user configurable SONET/SDH mode • TDM PW, MEF 8 & UDP/IP encapsulation
• STM-1/OC-3 Interface characteristics:• 63E1 or 84 T1s over STM-1/
OC-3 respectively per G.707• STM-1/OC-3 SFP LC connector• E1 mapping to STM-1:• STM-1 / AU-4 / VC-4 / TUG-3s /
TUG-2s / TU-12s / VC-12s /E1s • T1 mapping to OC-3:• OC-3 / STS-1 SPEs / VT Group/
VT1.5s/ T1s
ETX-5300A 2013 Slide24
The ETX-5300A MEF Services
E-Line Service – used to create• Ethernet Private Lines (EPL)• Virtual Private Lines• Ethernet Internet Access
UNIMulti-point to Multi-point EVC
Multi-point to Multi-point EVC
UNIUNI
UNI Point-to-Point EVCPoint-to-Point EVC
UNI
E-LAN Service – used to create• Multipoint L2 VPNs• Transparent LAN Service• Multicast networks
E-Tree Service – used to create*• Rooted multi-point L2 VPNs• Broadcast networks• Telemetry networks
Rooted Multipoint EVC
Rooted Multipoint EVC
UNI
UNI
UNI
Government, Campus Connectivity
Healthcare, Ethernet Private Line (EPL)
Dedicated Internet Access (DIA)
* Roadmap
ETX-5300A 2013 Slide25
ETX-5300A TDM Services
• TDM Services:– Ch. STM-1/OC-3 TDM service– Configure SONET/SDH mode per card– OAM:
• STM-1/OC-3 Line loopbacks• E1/T1 Loopbacks• PM & Alarms per GR.253
– Resiliency:• Automatic Protection Switching APS
– On the same card– Between Cards
• TDM IO card hot swappable
Up to 16 OC-3/STM-1 Lines
Fully Redundant 10 GbE / 1 GbE
TDM PWs
TDMNetwork
• PW Services:– TDM PW SAToP & CESoP per MEF8– TDM PW SAToP & CESoP per UDP/IP– OAM:
• VCCV-BFD for UDP/IP• RAD PW OAM• PM 15 minutes intervals at the SONET/SDH level• PM 15 minutes intervals at the E1/T1 level
– Resiliency:• 1:1 PW redundancy
– Alarms & Counters:• TDM PW buffer overrun• Remote packet loss• Jitter Buffer• Round trip delay
• No. of PWs in OC-3 mode: 1344
• No. of PWs in STM-1 mode: 1008
– PW per single T1\E1
• 336 PWs supported per service card
IP/ETHNetwork
ETX-5300A 2013 Slide26
ETX-5300A Redundancy
• Ethernet Ring Protection G.8032v2 – Ladder topology & 50ms switch over– Protection and recovery switching within 50 ms for typical rings – 1G & 10G Multi Ring topologies support – Supports Unicast and Multicast flows
Failure
Robustness: Source Steering Protection
50ms Switch Times
ETX-5300A 2013 Slide27
ETX-5300A Redundancy (cont.)
• Link Aggregation per 802.3 clause 43 (former 802.3ad)– Enables protection between associated ports – Intra card and Inter card LAG– Static LAG and LACP
• Main card redundancy• Clock redundancy • APS redundancy on TDM ports• Port redundancy • Power Supply Redundancy
Inter Card LAG
Intra Card LAG
Inter Card LAG Intra Card LAG
ETX-5300A 2013 Slide28
OAM Scheme
• ETX-2xxA is represented by units 2 and 7• ETX-5300A is represented by units 3 and 6• Both products support MIPs and MEP
Subscriber Equipment
1 2 3 4 5 6 7 8
Subscriber EquipmentOperator A NEs Operator B NEsService Provider
Subscriber ME
EVC ME
Operator B service ME
Tunnel ME
Operator A service ME
UNI ME UNI ME
TRAN
ETH
ETXETX-5300AETX-5300A
ETX
ETX-5300A 2013 Slide29
ETX-5300A OAM (cont.)
• Connectivity Fault Management defined by 802.1ag– CC: Connectivity Check
• CCM interval (at MA level): 3.33ms, 10ms, 100ms, 1s, 10s, 1m, 10m
– LB: LoopBack– LT: Link Trace
• Performance Management defined by Y.1731– LM: Loss Measurements– DM: Delay Measurements
• Statistics per service• Reporting per Event
ETX-5300A 2013 Slide30
Timing over Packet Technology
• IEEE 1588v2– Frequency, Phase, Time of Day (ToD)– Excellent for mobile backhaul
• Sync-E– Frequency– Excellent for mobile backhaul
• Adaptive Clock Recovery– Frequency, Phase– Excellent for business grade TDM– Not dependant on complete network deployment
RAD SYNC
Adaptive
1588-2008
Sync-E
E1/T1/OC3/STM-1
1PPS, 10MHz
1588-2008
Sync-E
E1/T1/OC3/STM-1
ETX-5300A 2013 Slide31
What’s ?
• RAD’s platform for high-performance clock recovery and distribution techniques with powerful frequency and phase alignment
– Includes the following technologies:• IEEE 1588-2008• Synchronous Ethernet
– Bridging between the technologies– Offering Uniform solution through RAD’s portfolio
• RAD: The Synchronization Expert– Adaptive clock recovery technology (ASIC- and FPGA-based) solutions since
1999– TDM-over-IP technology leader– Broad installed product base– Standardization leadership
ETX-5300A 2013 Slide32
ETX-5300A Mechanical overview and Shelf Types
• ETX-5300A mechanical dimensions:– Height: 13.3cm (5.2 in)– Depth: 380mm (15in) for DC chassis– Depth: 455mm (23.6 in) for AC/DC– Width: 440mm (17.3in)– Ready For 600mm rack ( cables etc.)
ETX-5300A 2013 Slide33
G.8032 Ring
G.8032 Ring
G.8032 Ring
RNC/aGW
RNC/aGW
BSCBSCCh-STM1
MBO Wholesale Provider
MBO
MBO
General MBH Application Scenario – Wholesale
ETX-5300A
ETX-220ETX-220
ETX
ETX
ETX
ETX ETX-5300A
ETX-5300A
ETX-1002/ETX-5300A
ETX
ETX
ETX
ETX
ETX
ETX
ETX
M/W Area
G.8032 Ring
Ch-STM1
MBOWholesale Provider
ETX-5300A
ETX
ETX
ETX
ETX-5300A
ETX-1002/ETX-5300A
ETX
ETX
ETX
ETX
M/W Area
ETX ETX
ETX
ETX-5300A
ETX
ETX-5300A
ETX-5300A
ETX-5300A 2013 Slide34
Why Access Aggregation?
• Aggregates SLA-based Ethernet & legacy TDM for mobile backhaul
• Provides E-NNI demarcation, Ethernet OAM termination and services grooming
• Ethernet linear and ring topology & protection switching: ITU-T G.8032
• Extensive Sync-E, 1588v2 master mode• Enables efficient handling of multi-
priority traffic on a per-flow basis, • offers various tools to ensure Six Nines
availability and sub-50ms restoration with no single point of failure
• 3U device with high port density, delivering a 100 Gbps throughput
G.8032 Ring
G.8032 Ring
G.8032 Ring
RNC/aGW
RNC/aGW
BSCBSCCh-STM1
MBO Wholesale Provider
MBO
MBO
ETX-220ETX-5300A
ETX-220ETX-220
ETX-220
ETX
ETX
ETX
ETX ETX-5300A
ETX-5300A
ETX-1002/ETX-5300A
ETX
ETX
ETX
ETX
ETX
ETX
ETX
M/W Area
ETX
ETX-5300A 2013 Slide35
Business Services Main Features
• Services– E-Line, E-LAN (TE, non-TE), – Legacy services support (TDM, clock synchronization edge-to-edge)
• High Availability & Reliability– Service always on – Service Restoration, protection in sub 50 mSec recovery– In Service Software Upgrade - ISSU
• Serviceability & manageability– Point & click provision, assure, validate & report customers SLA using RAD Service Delivery
Platform• Hard QoS and variety of classifiers/policer
– Differentiate customers SLA– Assured in all levels: carrier network, customer service
ETX-5300A 2013 Slide36
• The Math:– The required flows : 800 – 3200 flows– The Required Policers/Shapers: 800 -
1600– The Required OAM sessions: 400 - 800
Mobile Backhaul Traffic Dimensions
• Backhaul Dimensions:– Mobile Carrier assign 200 - 400 NBs to
concentrator– Each NBs has between 4 – 8 CoS flows– At least 2 flows from each NB are
classified as mission critical and should be monitored
End to End TM, Y.1731 & 802.1ag
Mobile Concentrator
Wholesale Carrier
Mobile Backhaul Flow types
Service Class Flow content
Very High + Synchronization
Very High Signaling & control
High Conversational
Medium + Real time Streaming
Medium Interactive data
Low Online streaming
Very Low Background
ETX-5300A 10 GbE NTU
RNC/aGW
Router
ETXETX
ETX
ETXETX
ETX-5300A 2013 Slide37
Mobile Backhaul Timing Aspects
ETX-5300A Grand master
Stratum 1 clock source or GPS
Timing over packet
Mobile Concentrator
Wholesale Carrier
ETX-5300A 10 GbE NTU
RNC/aGW
Router
ETXETX
ETX
ETXETX
ETX-5300A 2013 Slide38
Mobile Backhaul – Main Features
• Optimized for Radio Access Network (RAN) aggregation and transport to deliver ideal migration solution enabling fixed and mobile converged network
– High density & number of GE ports for a space restricted (3RU)
– Supports of legacy 2G TDM services over Ethernet services
– Supports major synchronization standards, including IEEE 1588-2008 M,S & TC & G.8261 in a variety of synchronization interfaces
• Scalable in-service 4 + 4 10GbE & 20 to 80GbE of Ethernet
• Broadband service support, including MEF 9, 14, 22
• Scalable TDM service 16 Ch. STM-1/OC-3 switching
• Carrier-grade availability and reliability
ETX-5300A 2013 Slide39
Why Choose the ETX-5300A
A Little Box of Big Magic:• Amplifies service capabilities, lowers TCO
• Multi-functional device for converged network infrastructure
• Support critical applications and legacy services
• Ensure end-to-end SLA over multiple provider networks
ETX-5300A 2013 Slide40
ETX-5300A Value Proposition
• 3U size Access Aggregation Switch
• Optimized device to aggregate smart termination units like any ETX-2xxA
• The ETX-5300A reduce various of interfaces into a single 10 GbE port
• Provides reach layer 2 application for business and mobile services
• Enables superior timing conversions and terminations
• Easy integration when it comes with ETX-2xx
• Similar knowhow as for the ETX-2xxA
• Future proof investment, that take advantage of technological innovations and new service possibilities as they develop
ETX-5300A 2013 Slide41
www.rad.com
Thank You For Your Attention