CZ-5000 Owner's Manual CZ-5000 Owners Manual.pdfCOSMOSYNTIESIZER cz-5000 CASIO MANUAL MANUAL
ETS Drive technology 10-08 - HELAGO-CZ
Transcript of ETS Drive technology 10-08 - HELAGO-CZ
Drive Technology
Drive technology in industry has been subject to rapid changes during the past years. The technical progress in communication-capable and network-based drive technology makes high demands on the knowledge of the professionals. The changes were sometimes fundamental. Many fields of drive technology are concerned.
All these changes require a well-founded training of the users which should provide them with a far-sighted acting competence.
The training concepts from
ELABO TrainingsSysteme in the field of drive technology consist of many individual, but combinable components.
• Hand-operated switches• Contactor controlled Circuits• Electric machines• Communication capable control devices• Electronic motor management• Controlled drives• Bus capable inverters• Monitoring devices• External and integrated safety functions• Industrial communication systems• Servo technology • Industrial ethernet• PROFINET
Drive Technology
Control Technology I
Hand-operated switchesin the A4 panel system
Learning Objectives:• Connection of hand-operated industrial low-voltage switching devices
• Functional test of start, reversing and step circuits
• Superior control devices, 0, I, II and Emergency-OFF
• Troubleshooting and maintenance
57 100 Three-phase asynchronous motor57 101 Dahlander motor57103 Asynchronous motor with separate windings
40 021 Switch Board I
Drive Technology
Control Technology IIContactor Circuits in the A4 panel system
Learning Objectives:• Basic circuits with series andparallel circuits, self-holdingfunction and lock
• Applied circuits with star/deltastart, reversing, Dahlander andstep circuit functions
• Division into main and auxiliarycurrent circuits, application of lineand device protection switches
• Release and operate lag switchingwith automatic step andsequence controls
40 022 Control Board II
40 003 Control Board III40 004 Control Board IV
Drive Technology
3 subjects - 1 system: Servo Drive Board• frequency converter• machine test stand• servo positioning drive
Servo Drive Board for:• synchronous and asynchronous motors
• control of characteristics• speed control• torque control with and without coder• position control• modular communication interface for- PROFIBUS- PROFINET- INTERBUS- CAN- CANopen- DeviceNet
56 150 Servo Drive Board
Drive Technology
3 subjects - 1 system: Servo Drive Board
• frequency converter• machine test stand• servo positioning drive
Learning Objectives:
• Connecting and starting up electronic frequency converters in compliance with EMC regulations
• Programming and testing of drive and protective functions, interpreting of error messages, trouble shooting
• Centralized operating and monitoring on the PC, connection to automation systems via bus systems (PROFIBUS, INTERBUS, CAN, CANopen, Devicenet
57 100 Three-phase asynchronous motor
56 150 Servo Drive Board
Drive Technology
3 subjects - 1 system: Servo Drive Board
• frequency converter• machine test stand• servo positioning drive
Learning Objectives:• Comprehension and start-up of electric machines
• Plotting characteristics in all the four quadrants
• Live-testing and measuring of load applications
• Using the software Controlled Drives
56 151 Three-phase servo motor
56 156 Software Controlled Drives
56 150 Servo Drive Board
speed torque power
Drive Technology
3 subjects - 1 system: Servo Drive Board
• frequency converter• machine test stand• servo positioning drive
Learning Objectives:• Mounting and installation of a servo drive
• Parameterization and commissioning• Configuration of torque and speed control
• Use of diagnostics system• Realization of a relative and absolute positioning
• Writing and testing of running programs• Integration of a positioning drive in an automation system
56 151 Three-phase servo motor
56 150 Servo Drive Board
56 152 Servo positioning axis
Drive Technology
3 subjects - 1 system: Servo Drive Board
• frequency converter• machine test stand• servo positioning drive
Drive Technology
56 100 Motor Management Board
Electronic Motor Management
Learning Objectives:
• Design, setup and commissioningof a three-phase drive with asynchronous motor
• Integration in automatic systemsvia field bus
57 100 Three-phase asynchronous motor
80591 Transfer System
Drive Technology
55 004 AC Drive Board
Frequency ConverterThree-phase drives with frequency converter for speed variation
Learning Objectives:• Connecting and starting upelectronic frequency converters incompliance with EMC regulations
• Programming and testing drive andprotective functions, interpreting oferror messages, trouble shooting
• Central operating and monitoring onthe PC, connection with automationsystems via PROFIBUS
57 104 Three-phase asynchronous motor57 105 Three-phase asynchronous motor
with EMC compliant connection cable
80591 Transfer System
Drive Technology
Decentralized three-phase drives
Motor starters with frequency converter
Learning Objectives:
• Soft starter• Reversing starter• Bus capable frequency converters
70 042 Power Board
57 100 Three-phase asynchronous motor
Drive Technology
The training concepts from ELABO TrainingsSysteme in the field of drive technology consist of many individual, but combinable components.
Drive Technology
57 130 Drive Power Board
57 131 Power Resistor Board
56 151 Three-phaseservo motor
56 150 Servo Drive Board
57 100 Three-phaseasynchronousmotor
55 004 AC Drive Board
56 100 Motor Management Board
Drive Technology
We are looking forward to
exchanging ideas with you.
ELABO TrainingsSysteme GmbHIm Hüttental 11
85125 Kinding / Germany
Phone: +49 8467 84 04 0
Fax: +49 8467 84 04 44
E-mail: [email protected]
Internet: http://www.elabo-ts.com
Please contact:
Ulrike Hepperle
Assistant Export Manager
Phone: +49 7527 9140-21
Fax: +49 7527 9140-77
E-mail: [email protected]
Skype: Ulrike.Hepperle
Klaus Hohl
Project Manager
Phone: +49 7527 9140-51
Fax: +49 7527 9140-77
E-mail: [email protected]
Skype: Klaus.Hohl
Sven Urban
Export Manager
Phone: +49 8467 8404 0
Fax: +49 8467 8404 44
E-mail: [email protected]
Skype: Sven.Urban