eTlecos Cacrwpi le Carrne LTR 1060 - Liebherr · 21.5 t. 3500 6210 3145 2700 5 0 4800 700 11385...

12
LTR 1060 Telescopic Crawler Crane Max. lifting capacity: 60 t Max. lifting height: 55 m Max. working radius: 50 m

Transcript of eTlecos Cacrwpi le Carrne LTR 1060 - Liebherr · 21.5 t. 3500 6210 3145 2700 5 0 4800 700 11385...

  • LTR 1060Telescopic Crawler CraneMax. lifting capacity: 60 tMax. lifting height: 55 mMax. working radius: 50 m

  • LTR 10602

    Telescopic Crawler Crane LTR 1060Outstanding off road capabilities and manoeuvrability

  • LTR 1060 3

    A long telescopic boom, high capacities, an outstanding manoeuvrability as well as an extensive comfort and safety confi guration distinguish the telescopic crawler crane LTR 1060 from Liebherr. The 60-ton crane offers state of the art technology for more convenience for the practical operation.

    • Strong, 40 m long telescopic boom with high telescopable capacities

    • “Pick-and-carry”, driving with full capacity

    • Short erection times, fast repositioning on the job site

    • Transport weights:- Complete only 62.6 t- Without ballast only 37.5 t

    • Compact dimensions:- Transport width only 3.0 m- Transport height only 3.15 m

    • Optimized for erection of precast elements in 2-hook operation with 2nd winch and erection jib

  • 3145

    ≤12 t ≤12 t ≤12 t ≤12 t ≤12 t

    3145

    ≤10 t ≤10 t ≤10 t ≤10 t ≤10 t ≤10 t

    23 t

    LTR 10604

    Fast and economical ballasting of the central and slewing plat-form ballast by self ballasting.

    Transport example, crane with complete ballast

    Central ballast 10 t

    Transport example, crane without ballast

    21.5 t

  • 3500

    6210

    3145

    270

    0

    R=4005

    R=3500

    480

    0

    700

    11385

    S2456.01

    LTR 1060 5

    Economical transportation and simple erection

    Optimized weights and dimensions

    The design lay out of the 60 ton crane allows a particular economic transporta-tion. Complete with slewing platform and central ballast the LTR 1060 weighs only 62.6 t. The axle loads on transportation with a 3-axle tractor and a 5-axle trailer stay below 12 t. When using a 6-axle trailer and a 4-axle tractor the axle loads can even be reduced to 10 t.

    The crawlers are retracted to a width of 3.0 m during transportation. Due to the low crane height of 3.15 m cost effective standard low-bed trailers can be used. By dismantling of the ballast the transport weight can further be reduced down to the dead weight of the basic machine of 37.5 t. On the job site the central bal-last as well as the slewing platform ballast can be self installed without the use of an auxiliary crane. A hydraulic self ballasting device is optionally available.

    Slewing platform ballast max. 15.6 t

  • LTR 10606

    Hydrostatic drive from Liebherr

    •Drivebyengineinsuperstructure

    •Steplesscontrolofthedrivingspeed

    •Normalgear0–3km/hCrawlinggear0–1km/h

    •Driveforce410kN

    •Groundpressure8.6t/m²

    •Gradeability46%

    3-bar crawler shoes · Width 700 mm Option: Flat crawler shoes · Width 700 mm

    3 m

  • 252

    3000 4800

    LTR 1060 7

    The crane cab

    •Largefieldofvision

    •Safetyglazing

    •Tintedwindowpanes

    •Cranedriver’sseatwithlumbarsupport,multiply adjustable

    •Heatandnoiseinsulatedinteriorcladding

    •Corrosionresistant

    •Workingfloodlight

    •Tiltable20°backwards

    High fl exibility

    Based on its outstanding off road performance and the possibility to drive sen-sitivelyunderfullloadtheLTR1060offersatremendousoperationalflexibilityfor e. g. erection of prefabricated sections, at pipeline construction or as auxil-iary crane for the erection of wind power plants.

    Telescopable crawlers

    In cramped conditions the crawlers can be retracted hydraulically to a chassis widthof3.0m.Alsoon thisnarrowcrawler track theLTR1060canconductcraneoperations,whicharesafeguardedby theLICCONsafe load indicator.The extending and retracting can be performed in assembled condition.

    Crane operation with side inclination

    Additional operational possibilities are offered by the load charts programmed asstandardforworkingwithmainboomandassemblyjibonsurfaceswithaninclinationupto4°.Toensurehighcapacitiesalsoundertheseconditionsthesheaves at the boom head and the assembly jib are manufactured from steel.

    Great operational diversity and comfort

    Telecopable crawlers

    Gradeability 46 %

  • LTR 10608

    The fully automatic telescoping system „TELEMATIK“

    •Improvementofcapacitiesatlongboomsand large radii due to “lightweight” tel-escoping system

    •1-stagehydrauliccylinderwithhydraulicallyoperated drive pin

    •Maintenancefreetelescopingsystem

    •Telescopingfullyautomatic

    •Simpleoperation,supervisionoftelescop-ingattheLICCONmonitor

    The assembly jib

  • LTR 1060 9

    Powerful, long telescopic boom and functional lattice extensions

    The telescopic boom consists of the base section and 4 telescopic sections, which can be comfortably and automatically extended and pinned to the re-quested length by the thousand fold proven single cylinder telescoping system TELEMATIK.

    •40mlongtelescopicboom

    •9.5m–16mlongdoubleswing-awayjib,attachableat0°,20°and40°

    •Hydraulicassistanceforassemblyoftheswing-awayjib

    •2.5mlongassemblyjib

    •Roostersheave,foldablesidewise

    High capacities with unpinned telescope lengths

    •Hightelescopablecapacitiesduetointerpolation

    •Separatecapacitychartsforholdingofloadsatunpinnedtelescopiclengths

    •DisplayatLICCONmonitor

    High capacities and fl exible boom system

    The rooster sheave

    Safe and comfortable assem-bly of the swing-away jib with

    hydraulic assembly assistance and Bluetooth Terminal BTT

    Holding capacities

    Unpinned telescopic lengths

    Telescopable capacities

  • LTR 106010

    The hoist gear

    •Liebherrhoistwinchwithinternalplanetary gear and spring loaded multidiskbrake

    •Ropepull45kNattheouterlayer

    •Max.ropespeed111m/min

    •2.hoistgearoptional

  • LTR 1060 11

    With proven components

    The drive components for the crane operation are designed for high performance and provide for sensitive and precise handling of the load. They are specially tuned for the crane operation and proved in severe long-term tests.

    •Craneengine:4-cylinderLiebherrturbodieselengine,129kW/175HPat1900rpm,max.torque815Nmat1500rpm,optimizedfuelconsumptionbyelectronic engine management

    •Diesel-hydrauliccranedrive,openhydrauliccircuitswithelectric„LOADSENSING“-control,4workingmotionssimultaneouslypossible

    •Electric/electronicSPS-cranecontrolviatheLICCON-computersystem

    •Comfortablearmrestcontrolwith2selfcentering4-foldmultifunctionjoysticks,stepless control of all crane movements with winch and slewing turning sensors, electronic pilot control

    •Slewinggearreversiblefromopentohydraulicallylocked,sotheslewingmotioncan be optimal adapted for the different operation conditions, e. g. sensitive for installationworkorfastforcyclework

    Powerful crane drive

    The slewing gear

    •Liebherrplanetarygearbox,springloadedmultidiskbrake

    •Reversibleopenorhydraulicallylockedas standard

    •Slewingspeedfrom0–1.7min-1 infini-tively variable and sensitively controlla-ble

    The central greasing

    •Standardcentralgreasingdeviceforslewingbearing, boom bearing, luffing cylinder and winch bearing

    •Evensupplyofgrease

    •Fillingquantityvisibleatanytimeintransparentreservoir

    LICCON-monitor

    Control sensor with touch displays

    Control unit

    Telescoping cylinder

    Luffing cylinder

    Controlblock

    Hoistgear

    Slewinggear

    Geartypepump

    Liebherr diesel engine

    Sensors

    Variable displacement pump

  • Liebherr-Werk Ehingen GmbHPostfach1361,89582Ehingen,Germany� +49 7391 502-0, Fax +49 7391 502-3399www.liebherr.com,E-Mail:[email protected]

    PN201.00.E04.2011 Theillustrationsincludealsoaccessoriesandspecialequipment,whichdon’tbelongtothestandardscopeofsupply.Subjecttomodification.

    Intelligent crane control

    The soft- and hardware of the mobile crane control is developed by Liebherr in-house. The central point is the LICCON computer system (Liebherr Computed Control-ling).Thesystemundertakesextensiveinformation,control

    Track adjustment by BTT

    Driving of the crawler chassis and complete crane control with wireless remote control (Option)

    For functional, safe and comfortable crane operation, the new control generation LICCON2

    andsupervisiontasks.WiththemobilecontrolanddisplayunitBTT–BluetoothTerminaltheerectionoperationsarecomfortably and safely conducted within view.