Ethernet POWERLINK Compatible Fieldbus System · Analog Unit 2CH 2CH 2 CH/ 2 CH IP67 M12 connector...
Transcript of Ethernet POWERLINK Compatible Fieldbus System · Analog Unit 2CH 2CH 2 CH/ 2 CH IP67 M12 connector...
Analog Unit
2CH2CH
2CH2CH
2CH/2CH/2CH2CH
IP67
M12 connector (5 pins)
IP67
Inputunit
Outputunit
Input/Outputunit
Input device
Output device
Pressuresensor Flow sensor
Electro-pneumatic regulator, etc.
SI Unit
IP67
Handheld Terminal
Analog unit SI unitEndplate Digital unit
Units can be differentiated by color.
Powersupply
Others Proximity sensor Photoelectric switch Limit switch
Solenoid valve Others Indicator light Relay Buzzer
For detailed specifications of connectable devices, refer to the catalog of each device and select the right device for your application. If anything is unclear, please contact SMC.
Digital Unit
M12 connector (5 pins) M8 connector (3 pins) D-sub connector Spring type terminal block
8 outputs8 outputs 16 outputs16 outputs
16 inputs16 inputs16 inputs16 inputs8 inputs8 inputs16 inputs16 inputs8 inputs8 inputs
16 outputs16 outputs
IP67 IP67 IP67 IP40 IP40
Input device
Output device
Inputunit
Outputunit
Input/Outputunit
8 inputs/8 inputs/8 outputs8 outputs
8 inputs/8 inputs/8 outputs8 outputs
Flow switch
Auto switch
Pressureswitch
Inputunit
Inputunit
Inputunit
Inputunit
Input/Outputunit
Outputunit
Input/Outputunit
Manifold Solenoid ValvesManifold Solenoid ValvesSV1000/2000/3000 Series S0700 Series VQC1000/2000/4000/5000 Series
IP67
SY3000/5000/7000 Series
IP67 IP40 IP67
Ethernet POWERLINK Compatible Fieldbus SystemEX600-SPL1-X26
FeaturesSupports the Ethernet POWERLINK communication protocol* Ethernet POWERLINK: Industrial Ethernet that supports a communication speed of 100 Mbps
P.G. informationPoint to Group
Specialized ProductContact our sales office for delivery dates and prices as this is a special model.
To ensure the safest possible operation of this product, please be sure to thoroughly read the “Safety Instructions” in our “Best Pneumatics” catalog before use.Caution
©2018 SMC Corporation All Rights Reserved
4-14-1, SOTO-KANDA, CHIYODA-KU, TOKYO 101-0021, JAPAN URL: http://www.smcworld.com SP175X-026EP: WS
Ethernet POWERLINK Compatible Fieldbus SystemEX600-SPL1-X26
Specifications
Item Specifications
Communication
Protocol Ethernet POWERLINK
Media 100BASE-TX
Communication speed 100 Mbps, Half duplex
Node ID setting range 1 to 239
Internal current consumption (Power supply for control/input) 120 mA or less
Output
Output type Source/PNP (Negative common)
Number of outputs 32 points
Connected loadSolenoid valve with surge voltage suppressor of 24 VDC and 1.0 W or less
(made by SMC)
Power supply 24 VDC, 2 A
Fail safe HOLD/CLEAR/Forced power ON
Protection Short-circuit protection
Enclosure IP67 (Manifold assembly)
Standards CE marking, UL (CSA), RoHS compliant
Weight 300 g or less
Please contact SMC for the operation manual and configuration file.Refer to the catalog and the SMC website for other specifications of the EX600, end plate, and input/output units.
Wiring SpecificationsCommunication connector BUS IN/OUT
M12 4-pin socket, D-Coding
No. Designation
1 TX+
2 RX+
3 TX−
4 RX−
Mating cable examples [M12 connector (straight) — Separate lines]: PCA-1446566 (5 m) made by SMC, etc.
[M12 connector (straight) (Fieldwireable connector)]: PCA-1446553 made by SMC, etc.
[M12 connector (straight) — RJ45 connector]: EX9-AC010EN-PSRJ (1 m): EX9-AC020EN-PSRJ (2 m): EX9-AC030EN-PSRJ (3 m): EX9-AC050EN-PSRJ (5 m): EX9-AC100EN-PSRJ (10 m)
(made by SMC), etc.
[M12 connector (straight) — M12 connector (straight)]: EX9-AC010EN-PSPS-X19 (1 m): EX9-AC020EN-PSPS-X19 (2 m): EX9-AC030EN-PSPS-X19 (3 m): EX9-AC050EN-PSPS-X19 (5 m): EX9-AC100EN-PSPS-X19 (10 m)
(made by SMC), etc.
EX600 X261PLS
How to Order
Output specification1 32 outputs, PNP (Negative common)/Source
Communication protocolPL Ethernet POWERLINK
∗ Order the end plate and input/output units as a set to be used in combination.
P.G. informationPoint to Group
Specialized Product
Ethernet POWERLINK Compatible Fieldbus SystemEX600-SPL1-X26
Dimensions
1. For the dimensions when combined with the valve manifold, use the valve manifold dimensions of the standard EX600 series.
2. Order the valve manifold, end plate, and input/output units separately.Specify “no SI unit” and “negative common” for the valve manifold specifications.
Caution
[mm]
P.G. informationPoint to Group
Specialized Product