Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

download Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

of 13

Transcript of Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    1/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    2/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    3/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    4/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    5/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    6/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    7/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    8/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    9/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    10/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    11/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    12/13

  • 8/11/2019 Etag 001 Part 4 Deformation Controlled Expansion Anchors Amended 2013-01-18

    13/13


European Technical Approval ETA-06/0047 - Hilti · Anchors for multiple use for non-structural applications", ETAG 001-06. 2 Deutsches Institut für Bautechnik is authorized to check

European Technical Approval ETA-06/0047 - Hilti · Anchors for multiple use for non-structural applications", ETAG 001-06. 2 Deutsches Institut für Bautechnik is authorized to check

European Technical ETA -02/0024 Assessment of 13 February …...anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document (EAD)

European Technical ETA -02/0024 Assessment of 13 February …...anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document (EAD)

Construction Anchors Inc · Manufacturer CONSTRUCTION ANCHORS INC. 7F-1 No. 388, SEC ... Anchorages under static and quasi-static loads are designed in accordance with ETAG 001, Annex

Construction Anchors Inc · Manufacturer CONSTRUCTION ANCHORS INC. 7F-1 No. 388, SEC ... Anchorages under static and quasi-static loads are designed in accordance with ETAG 001, Annex

ETAG: Delivering Visitor Experiences

ETAG: Delivering Visitor Experiences

European Technical Approval ETA-12/0006 - Hilti · anchors" on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action". In addition to the specific

European Technical Approval ETA-12/0006 - Hilti · anchors" on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action". In addition to the specific

Wide Selection of Fasteners & Hardware...ANCHORS Adhesive Anchors Drive Anchors Drop In Anchors Expansion Anchors Machine Screw Anchors Nail Anchors Plastic Anchors Pre-Expanded Anchors

Wide Selection of Fasteners & Hardware...ANCHORS Adhesive Anchors Drive Anchors Drop In Anchors Expansion Anchors Machine Screw Anchors Nail Anchors Plastic Anchors Pre-Expanded Anchors

European Technical ETA-13/1037 Assessment of 26 May 2014€¦ · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document

European Technical ETA-13/1037 Assessment of 26 May 2014€¦ · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document

European Technical ETA-12/0083 Assessment of 26 June … · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", ... Reinforcing bars made of steel with a diameter from

European Technical ETA-12/0083 Assessment of 26 June … · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", ... Reinforcing bars made of steel with a diameter from

Memberof DIBt TA · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of

Memberof DIBt TA · anchors for use in concrete", ETAG 001 Part 5: "Bonded anchors", April 2013, used as European Assessment Document (EAD) according to Article 66 Paragraph 3 of

European Technical Approval ETA-98/0001 · Torque controlled expansion anchors ", ETAG 001-02. 2 Deutsches Institut für Bautechnik is authorized to check whether the provisions of

European Technical Approval ETA-98/0001 · Torque controlled expansion anchors ", ETAG 001-02. 2 Deutsches Institut für Bautechnik is authorized to check whether the provisions of

European Technical Approval ETA-10/0012 · anchors", on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action".

European Technical Approval ETA-10/0012 · anchors", on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action".

Business OppOrtunities - ETAG

Business OppOrtunities - ETAG

METAL INJECTION ANCHORS FOR USE IN MASONRY … · This ETAG applies to injection anchors consisting of a threaded rod, deformed reinforced bar, internal threaded socket, or other

METAL INJECTION ANCHORS FOR USE IN MASONRY … · This ETAG applies to injection anchors consisting of a threaded rod, deformed reinforced bar, internal threaded socket, or other

European Technical ETA -10/0005 Assessment of 10 May … · anchors for use in concrete", ETAG 001 Part 6: "Anchors for multiple use for non -structural applications", August 2010,

European Technical ETA -10/0005 Assessment of 10 May … · anchors for use in concrete", ETAG 001 Part 6: "Anchors for multiple use for non -structural applications", August 2010,

Etag 001 Annex A

Etag 001 Annex A

COM - '+domain name+' · • ETAG 029 for metal anchors installed in masonry. • EOTA TR 023 for post-installed reinforcement bars. Products complying with European standards or

COM - '+domain name+' · • ETAG 029 for metal anchors installed in masonry. • EOTA TR 023 for post-installed reinforcement bars. Products complying with European standards or

ETAG 001-1 Anchors in General

ETAG 001-1 Anchors in General

European Technical Approval ETA-12/0164 · on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action".

European Technical Approval ETA-12/0164 · on the basis of Option 1 and ETAG 001 Annex E "Assessment of Metal Anchors under Seismic Action".

Etag 027 April 2013

Etag 027 April 2013

European Technical ETA-13/1036 Assessment of 28 April 2015 · Injection Anchors for Use in Masonry", ETAG 029, April 2013, used as European Assessment Document (EAD) according to

European Technical ETA-13/1036 Assessment of 28 April 2015 · Injection Anchors for Use in Masonry", ETAG 029, April 2013, used as European Assessment Document (EAD) according to