Essential for business | Important to people | Safe for...
Transcript of Essential for business | Important to people | Safe for...
Essential for business | Important to people | Safe for environment
About Us
ITW SYSTEMS is an ECO-friendly company, specializing in design and implementation ofenergy-saving lighting equipment and solutions for the commercial, municipal andgovernment sectors. Since 2010, we help our partners to minimize energy costs through effective and safe for humans and environment systems of LED lighting. The headquarters is located in the USA, engineer and manufacturing team is located in Ukraine. We have rep offices in Poland, Slovakia and Estonia. We work with the multi-national and local companies.
● more than 500 large energy-efficient projects realized ● our own high-tech manufacturing● the most reliable components - OSRAM, LG, CREE, NICHICON, SEOUL● customized and optimized solution for each client● warranty of at least 5 years● we invest in development of new products
Why ITW SYSTEMS:
We are recommended by:
I T W S Y S T E M S
OurproductsI T W S Y S T E M S
LED
LED
Galvanically isolated
Capacitor NICHICON (Japan)Power factor of the power supply no less than 0.95
Efficiency of the power supplyno less than 92%
Power supply output ripple less than 10%
Wide range of input voltage
Color temperature3000K - 6500K
Color temperature 3000K - 6500K
Shock-proof, temper resistant plafond with a luminous flux transmission efficiency of 93%
Shock-proof, temper resistant plafond with a luminous flux transmission efficiency of 93%
Ingress protection IP65Optical part ingress protection IP64
Aluminum housing
Aluminum housing
SealerThermally conductive adhesive
Thermally conductive adhesive
Sealer
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP65Power supply: 160-275 V АС, 12-36 V АС/DCPower factor: 0.95Optical system: type «D» reflectorOperating temperature: from -10 °C to +40 °C(in extreme operating conditions, from -25 to +55 °C)Length options: from 565 to 1 500 mmLuminous flux: from 3 000 to 13 500 lm (one module)Color temperature options: 3000K–6500K Power: from 25 to 122 WPower supply options:- internal- externalWarranty 5 years
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP20/IP64 (IP64 optical part)Power supply: 165-275 V ACPower factor: 0.95Operating temperature: from 0 to +40 °C Available length range: from 230 to 3 000 mmLuminous flux: from 1 000 to 28 000 lmColor temperature options: 3000K–6500KPower: from 8 to 240 WLocation of power supply:- internalWarranty 5 years
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP65Power supply: 165-275 V - 50 Hz, 12-36 V АС/DCPower factor: 0.95Optical system: without reflectors and opticsOperating temperature: from -10 to +40 °C(in extreme operating conditions, from -25 to +55 °C)Length options: from 230 to 3 000 mmLuminous flux: from 1 000 to 29 000 lm (one module)Color temperature options: 3000K–6500KPower: from 8 to 245 WPower supply options:- internal- externalWarranty 5 years
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP65Power supply: 160-275 V AC, 12-36 V AC/DCPower factor: 0.95Operating temperature: from -10 to +40 °CDimensions: 595х595х200 mm Luminous flux: from 1 000 to 5 000 lmColor temperature options: 3000K–6500K Power: from 8 to 47 WLocation of power supply:- externalWarranty 5 years
Linear Light
Our productsI T W S Y S T E M S
Linear Light with Reflector
Administrative Light
Recessed Light
LED Manufacturer: Osram, LGPower: 8 WLuminous flux: from 750 to 900 lmColor temperature options: 3000K–6500KLifespan: at least 50 000 hoursPower factor: 0,94Input Voltage Range: 180 - 275 W - 50 HzOperating temperature: from 0 to +35 °CDimensions: 170 x 100 x 43 mmIngress protection: IP20/IP64 (IP64 - optical part)Option: can operate in the reduced power mode (3 W) whenconnected to external motion/ presence / illumination sensorWarranty 3 years
LED Manufacturer: Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP20/IP64 (IP64 - optical part)Power supply: 160-275 V - 50 HzPower factor: 0.95Operating temperature: from 0 to +40 °CLength: 595 mm Luminous flux: from 1 500 to 5 500 lmColor temperature options: 3000K–6500K Power: from 10 to 46 WLocation of power supply:- externalWarranty 5 years
Light for Multi-Dwelling residential andOffice buildings
Recessed Light
Luminous flux: 600 lmPower: 6 WIngress protection: IP65Power supply: 165-275 V АС - 50 HzOperating time in emergency mode: 1.3 hoursLength: 270 mmOperating temperature: from –10 to +40 °CLocation of power supply:- insideWarranty 3 years
Battery life: at least 2 hoursIngress protection: IP65Operating temperature: from –10 to +40 °CWarranty: 3 years
LED Manufacturer: Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP20/IP64 (IP64 - optical part)Power supply: 165-275 V - 50 HzPower factor: 0.95Operating temperature: from 0 to +40 °CLength: 1 500 mmLuminous flux: from 4 700 to 7 400 lmColor temperature options: 3000K–6500K Power: from 37 to 62 WLocation of power supply:- externalWarranty 5 years
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP65Power supply: 160-275 V ACPower factor: 0.95Operating temperature: from –40 to +50 °CPossible length range: from 520 to 1 070 mmPower: from 15 to 71 WLuminous flux: from 2 000 to 8 500 lm Color temperature options: 3000K–6500KLocation of power supply:- externalWarranty 5 years
LED Manufacturer: Cree, Osram, LGPlafond: light diffusing polycarbonateIngress protection: IP65Power supply: 160-275 V ACPower factor: 0.95Optical system: without reflectors and opticsOperating temperature: from –40 to +50 °CPossible length range: from 520 to 1 070 mmLuminous flux: from 2 000 to 18 000 lmColor temperature options: 3000K–6500K Power: from 30 to 142 W Location of power supply:- externalWarranty 5 years
Our productsI T W S Y S T E M S
Street Light
Street Light «TWIN»
Retrofit for the light-line systems like Phillips TTX
Emergency Light
Power Supply for Emergency Light
Linear lights(with reflector)
Mounting hardwareI T W S Y S T E M S I T W S Y S T E M S
Reflector Type «А»
Horizontal cableLow bracket (external)
Closedring
Low bracket(internal)
Streetconsole
Swivelbracket
Highbracket
Openring
Double bracket Pin
Reflector Type «С»
Reflector Type «D»
Our advantagesMaximum efficiency of the Power SupplyHigh efficiency
of the Power Supply
The efficiency of the plafond
LED Efficiency
More l ight
Efficacy of the project
Increased service l ifespan
The efficacy of the project
LED Efficiency
LED Efficiency
Project cost
Increasing service l ife
Increased service l ifespan
Powerconsumed
Time forluminaires selection
A comfortable light with minimal light loss
Dust resistant plafond
Selecting various light distribution curves
The power supply in our lights can be fine-tuned to the optimal required level, which allows for a 3-10% increase in efficiency. In standard “off-the-shelf”power suppliers, efficiency sharply decreases when deviating from the rated power value
We use special light-diffusing polycarbonate for our lights, resulting in atransmission efficiency of up to 92-93%. It results in a more comfortable and more efficient light. Typical lights use materials that have a luminous fluxtransmission efficiency of no more than 80-82%. We do not use openlight-emitting diodes, transparent plafonds or lenses in our products, which cause discomfort and eye irritation to the users
The lighting part of all our lights is made with maximum protection – IP6x, even if the allowed level of protection is lower. Lighting fixtures without dustммprotected housing typically show up to a 10-20% degradation in luminous flux after only a few years of regular use. The sealing materials that we use ensure that the optical part of our lights remains clean throughout the entire period of operation
By using external reflectors, we create optimal light distribution for every given design and project. Depending on the project, this can yield an increase inefficiency of up to 10-20%
The most efficient LEDs
High-quality electronic components
Fine-tuning of the power and luminous flux
Aluminum radiator
Aluminum printed circuit boards
Lighting Control
Automated system for computing/selecting optimal lights parameters
We create lights for each specific project and use the latest and mosteffective LED models in our design, optimizing by selecting the mostefficient LED model for a given set of requirements. This allows us to design and produce a 5-10% more efficient product, on average, than those of our competitors
We use only the highest quality components in our products (light-emittingdiodes, capacitors, printed circuit boards, etc.) from top manufacturers. Thisattention to selection of our components, as well as our rigorous quality control measures, ensures that our products will have at least a 20% longer service life span than those of our competitors
When developing a project, we select the optimal ratio of lights, their efficiency, power consumption and price. As a result, our projects are 10-20% moreaffordable, and 15-20% more efficient than those of our competitors
In our industrial lights, we use aluminum heat sinks for heat dissipation, which allows for a 10-15% increase in efficiency, and extends the service life span up to 30-50% in comparison to a steel or polymer casing
We use aluminum circuit boards instead of the traditionally used textolite PCBs. This difference allows for an increase of the LED’s efficiency by 3-5%, andextends its service life span by 10-20%
We offer various choices on lighting control systems, allowing our clients to save up to an additional 30% of the consumed power
We have developed specialized software with an embedded mathematicalmodel that enables us to construct an optimal luminaire based on your projectrequirements and specifications. Our partners and clients do not need to spend their valuable time searching for the right choices in catalogues anymore.Simply enter your parameters into our software and our program will compute the optimal luminaire in a matter of seconds
I T W S Y S T E M S
+10%
+10%
+10%
+20%
+20%
+20%
+20%
+15%
+5%
-20%
+50%
+20%
-30%
-95%
Warehouse lighting
I T W S Y S T E M S
Project: Warehouse
Year of implementation: 2014
Number of lights: 3 803
Area: 105 000 m2
F O Z Z Y G R O U P
● Energy savings of up to 70%● Individual selection of reflectors to achieve the best light distribution● Durability. Service lifespan - no less than 5 years● No blinding effect● Can be used in the fire hazard zones
Industriallighting
Project: Soft drinks bottling facility
Year of implementation: 2013
Number of lights: 3 470
Area: 60 000 m2
C O C A - C O L A● Reducing the load on the grid● Reducing operating and maintenance costs● Individual approach and customization of each project● High level of ingress protection (IP)● High efficiency (up to 140 lm/W)● Ability to work in non-standard temperature conditions● Lighting control system options
I T W S Y S T E M S
Retaillighting
I T W S Y S T E M S
Project: Supermarket chain
Year of implementation: 2015
Number of lights: 153
Area: 592 m2
А Т Б
● Compliance with customer requirements for the luminous flux density● Efficient lighting of aisles● Individual and optimized solutions for each facility● Any length of the light (from 230 to 3000 mm)● Individual and optimized selection of the color rendering index (CRI)
Officelighting
Project: Office
Year of implementation: 2013
Number of lights: 300
Area: 1 000 m2
C O C A - C O L A
I T W S Y S T E M S
● Individual and optimized selection of the color temperature● Low power supply output ripple● Energy efficient● Long lifespan● Comfort light
Streetlighting● Creative technical implementation● High degree of ingress protection IP65● Durability (service life - up to 20 years)● High energy efficiency● Lighting control system options
I T W S Y S T E M S
Light for multi-dwelling residential and office buildings
I T W S Y S T E M S
Porject: Kindergarten
Year of implementation: 2014
Number of lights: 400
Area: 1 500 m2
K I N D E R G A R T E N “ P I Z N A Y K O ”● Competitive price● High-quality heat-conducting body materials● Vandal-proof temper resistant design● Low power consumption● Simple installation
Contact us:
Tel: +1 212 418 9600 ext. 263 (USA) +380 44 222 8323 (Ukraine) +372 55 698 352 (Estonia) +421 919 138 817 (Slovakia) +48 606 13 66 13 (Poland)
www.itw-systems.com