No. 20 Tee No. 10 ElbowCertications/Listings When supplied as hot dip galvanized the following ttings are UL Classied in accordance with ANSI/NSF 61 and for use on cold +86F/+30C potable water service and ANSI/NSF 372: No. 10 90 Elbow, No. 11 45 Elbow, No. 12 22 1/2 Elbow, No. 13 11 1/4 Elbow, No. 100 90 Long Radius Elbow, No. 110 45 Long Radius Elbow, No. 20 Tee, No. 25 Tee with Grooved Branch, No. 30 45 Lateral, No. 60 Cap, No. 50 Concentric Reducers, No. 51 Eccentric Reducers.Note: The following Victaulic ttings are VdS approved: No.10 90 Elbow, No.11 45 Elbow, No.20 Tee and No.60 Cap.Note: The following Victaulic ttings are LPCB approved: No.10 90 Elbow, No.11 45 Elbow, No.12 22 1/2 Elbow, No.13 11 1/4 Elbow, No.30 45 Lateral, No.30-R Reducing Lateral, No.100 Long Radius Elbow, No.110 Long Radius Elbow, No.20 Tee, No.35 Cross, No.60 Cap, No.25 Reducing Tee, No.33 True Wye, No.50 Concentric Reducer, No.51 Eccentric Reducer and No.29M Tee with Threaded Branch.Product DescriptionWide range of ttings from 60"/20 1500 mmFittings conform to the pressure ratings of the Style 77 couplingFittings are provided with grooved or shouldered ends. Note: These ttings are not intended for use with Victaulic plain end couplings.Fittings are intended for use in grooved piping systems onlyNote: When connecting wafer or lug type buttery valves directly to Victaulic ttings using Style 741 or 743 ange adapters, be sure to check disc clearance dimensions with I.D. dimension of tting.Victaulic Grooved End Fittings1victaulic.com | Fittings | Grooved End | Publication 07.01 07.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.07.01Job/OwnerSystem No.LocationContractorSubmitted ByDateEngineerSpec SectionParagraphApprovedDate2victaulic.com 07.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comOther Fitting StylesAGS - Advanced Groove System from 14 60/350 1500 mm Publication 20.05Stainless Steel Publication 17.16Galvanized Publication 07.01 for Original Groove Fittings Publication 20.05 for AGS Fittings Extra Heavy EndSeal ES Publication 07.03Copper Publication 22.04Copper Installation-Ready Publication 22.15Ductile Iron for AWWA size pipe Publication 23.05XL ttings for abrasive services Publication 07.07Aluminum Publication 21.03Shouldered Ends Publication 07.06Plain End Publication 14.043victaulic.com 07.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comMaterial SpecicationsFitting: (specify choice) Standard: Ductile iron conforming to ASTM A-536, Grade 65-45-12. Optional: Segmentally welded steel as shown under nipplesNipples: (specify choice) 4/20 100 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type F 5 6/125 150 mm: Carbon steel, Schedule 40, conforming to ASTM A-53, Type E or S, Gr. B 8 12/200 300 mm: Carbon steel, Schedule 30 or 40, conforming to ASTM A-53, Type E or S, Gr. BFlanged Adapter Nipples: (specify choice) Class 125 Flange: Cast iron conforming to ANSI B-16.1 Class 150 Flange: Carbon steel conforming to ANSI B-16.5, raised or at face Class 300 Flange: Carbon steel conforming to ANSI B-16.5, raised or at faceFitting Coating: (specify choice) Standard: Orange enamel. Optional: Hot dip galvanized and others. Some ttings supplied electroplated as standard see product specications.Flanged Adapter Nipple Coating: (specify choice) Standard: None (Unnished) Optional: Orange enamel, hot dip galvanized and others.4victaulic.com 07.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comFlow Data(Frictional Resistance)The chart expresses the frictional resistance of various Victaulic ttings as equivalent feet of straight pipe. Fittings not listed can be estimated from the data given, for example, a 22 elbow is approximately one-half the resistance of a 45 elbow. Values of mid-sizes can be interpolated.Size DimensionsNominal SizeActual Outside Diameter90 Elbows 45 Elbows TeesNo. 10 Std. RadiusNo. 100 1 D Long RadiusNo. 11 Std. RadiusNo. 110 1 D Long Radius Branch Runinches mminches mmfeet metersfeet metersfeet metersfeet metersfeet metersfeet meters1 251.315 33.71.7 0.50.8 0.24.2 1.31.7 0.52 502.375 60.33.5 1.12.5 0.81.8 0.51.1 0.38.5 2.63.5 1.176.1 mm3.000 76.14.3 1.32.1 0.710.8 3.34.3 1.33 803.500 88.95.0 1.53.8 1.22.6 0.81.6 0.513.0 4.05.0 1.5108.0 mm4.250 108.06.4 2.03.2 0.915.3 4.76.4 2.04 1004.500 114.36.8 2.15.0 1.53.4 1.02.1 0.616.0 4.96.8 2.1133.0 mm5.250 133.08.1 2.54.1 1.220.0 6.28.1 2.5139.7 mm5.500 139.78.5 2.64.2 1.321.0 6.48.5 2.65 1255.563 141.38.5 2.64.2 1.321.0 6.48.5 2.6159.0 mm6.250 159.09.4 2.94.9 1.525.0 7.69.6 2.9165.1 mm6.500 165.19.6 2.95.0 1.525.0 7.610.0 3.06 1506.625 168.310.0 3.07.5 2.35.0 1.53.0 0.925.0 7.610.0 3.08 2008.625 219.113.0 4.09.8 3.06.5 2.04.0 1.233.0 10.113.0 4.010 25010.750 273.017.0 5.212.0 3.78.3 2.55.0 1.541.0 12.517.0 5.212 30012.750 323.920.0 6.114.5 4.410.0 3.06.0 1.850.0 15.220.0 6.114 35014.000 355.624.51

7.515.8 4.818.51

5.611.0 3.470.0 21.323.0 7.016 40016.000 406.428.01

8.518.0 5.521.01

6.413.0 4.080.0 24.427.0 8.218 45018.000 457.031.01

9.520.0 6.123.51

7.214.0 4.390.0 27.430.0 9.120 80020.000 508.034.01

10.422.5 6.925.51

7.816.0 4.9100.0 30.533.0 10.124 60024.000 610.042.01

12.827.0 8.229.51

9.019.0 5.8120.0 36.640.0 12.2 AGS ttings available up to 60/1500 mm. Contact Victaulic for details.1 Fitting ow data for 14-24/350-600 mm size No. 10 and No. 11 Elbows is based on ttings for Style 07 and 77 couplings. For ow data on AGS ttings (No. W10 and No. W11 Elbows), refer to publication 20.05.5victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comDimensionsElbowsNo. 10 90 Elbow No. 11 45 Elbow No. 12 22 Elbow No. 13 11 Elbow No. 100 90 Long Radius Elbow No. 110 45 Long Radius ElbowCto EC to EC to EC to EE to EC to EC to EC to ENo. 10 No. 11No. 12 Standard and GSNKNo. 13 No. 100 No. 110SizeNo. 10 90 ElbowNo. 11 45 ElbowNo. 12 22 ElbowNo. 13 11 ElbowNo. 100 90 Long Radius ElbowNo. 110 45 Long Radius ElbowNominal SizeActual Outside Diameter C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kg 201.050 26.92.25 570.5 0.21.50 380.5 0.21.63 (sw) 411.38 (sw) 352.50 (sw) 640.4 0.21.88 (sw) 480.3 0.11 251.315 33.72.25 570.6 0.31.75 440.6 0.33.25 2

830.6 0.31.38 (sw) 350.3 0.12.88 (sw) 730.6 0.32.25 (sw) 570.5 0.21 321.660 42.42.75 701.0 0.51.75 440.9 0.41.75 440.8 0.41.38 (sw) 350.5 0.23.25 (sw) 831.1 0.52.38 (sw) 600.7 0.31 401.900 48.32.75 701.2 0.51.75 440.9 0.41.75 440.8 0.41.38 (sw) 350.5 0.23.63 (sw) 922.2 1.02.50 (sw) 641.3 0.62 502.375 60.33.25 831.8 0.82.00 511.3 0.61.88 481.2 0.51.38 351.0 0.54.38 1112.5 1.12.75 701.8 0.82 652.875 73.03.75 953.2 1.52.25 572.2 1.04.00 2

1022.3 1.01.50 381.1 0.55.13 1303.4 1.53.00 762.8 1.376.1 mm3.000 76.13.75 953.7 1.72.25 573.4 1.52.25 571.50 38 3 803.500 88.94.25 1084.5 2.02.50 643.1 1.44.50 2

1143.1 1.41.50 382.1 1.05.88 1496.0 2.73.38 864.9 2.23 904.000 101.64.50 1145.6 2.52.75 704.3 2.02.50 (sw) 644.0 1.81.75 (sw) 442.7 1.2 4 1004.500 114.35.00 1277.1 3.23.00 765.6 2.52.88 735.6 2.51.75 443.6 1.67.50 19112.3 5.64.00 1027.3 3.3108.0 mm4.250 108.05.00 12711.0 5.03.00 765.6 2.5 4 1205.000 127.05.25 (sw) 13310.0 4.53.13 (sw) 796.0 2.73.50 (sw) 896.6 3.01.88 (sw) 484.2 1.9 5 1255.563 141.35.50 14011.7 5.33.25 838.3 3.82.88 (sw) 737.8 3.52.00 (sw) 515.0 2.29.25 (sw) 23518.0 8.24.88 (sw) 12414.8 6.7133.0 mm5.250 133.05.50 14011.7 5.33.25 838.3 3.8 139.7 mm5.500 139.75.50 14011.7 5.33.25 838.3 3.82.88 732.00 51 6 1506.625 168.36.50 16517.2 7.83.50 8910.8 4.96.25 2

15912.2 5.52.00 517.0 3.210.75 27330.4 13.85.50 14017.4 7.92 Gooseneck design, end-to-end dimension ttings in this size, contact your nearest Victaulic sales representative. 3 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.4 Chinese standard sizes6victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comCto EC to EC to EC to EE to EC to EC to EC to ENo. 10 No. 11No. 12 Standard and GSNKNo. 13 No. 100 No. 110SizeNo. 10 90 ElbowNo. 11 45 ElbowNo. 12 22 ElbowNo. 13 11 ElbowNo. 100 90 Long Radius ElbowNo. 110 45 Long Radius ElbowNominal SizeActual Outside Diameter C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Each C to EApprox. Wgt. Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kg159.0 mm6.250 159.06.50 16518.6 8.43.50 8910.8 4.9 165.1 mm6.500 165.16.50 16515.5 7.03.50 899.8 4.43.13 7911.4 5.22.00 517.4 3.410.75 (sw) 27329.0 13.25.50 (sw) 14019.0 8.68 2008.625 219.17.75 19729.9 13.64.25 10820.4 9.37.75 2

19720.0 9.12.00 5110.1 4.614.25 36266.0 30.07.25 18436.0 16.310 25010.750 273.09.00 22963.3 28.74.75 12137.5 17.04.38 (sw) 11130.0 13.62.13 5411.8 5.315.00 381107.0 48.56.25 15957.0 25.912 30012.750 323.910.00 25474.0 33.65.25 13366.7 30.34.88 (sw) 12440.0 18.12.25 5729.3 13.318.00 457156.0 70.87.50 19190.0 40.814 3

35014.000 355.614.00 356136.0 61.75.75 14665.0 29.55.00 (sw) 12746.0 20.93.50 (sw) 8932.0 14.521.00 (s) 533164.0 74.48.75 22282.0 37.2377.0 mm 414.843 377.014.84 377149.3 67.76.13 15682.0 37.2 16 3

40016.000 406.516.00 406171.0 77.66.63 16888.0 39.35.00 (sw) 12758.0 26.34.00 (sw) 10242.0 19.124.00 (s) 610210.0 95.310.00 (s) 254100.0 45.4426.0 mm 416.773 426.016.75 425198.6 90.17.00 178101.3 45.9 18 3

45018.000 457.218.00 457228.0 103.47.50 190108.0 50.05.50 (sw) 14065.0 29.54.50 (sw) 14453.2 24.127.00 (s) 686273.0 123.811.25 (s) 286135.0 61.2480.0 mm 418.898 480.018.88 480291.0 132.07.83 200141.7 64.3 20 3

50020.000 508.020.00 508298.0 135.28.25 210138.0 62.66.00 (sw) 15278.6 36.05.00 (sw) 12765.0 29.530.00 (s) 762343.0 155.612.50 (s) 318174.0 78.9530.0 mm 420.866 530.020.88 530355.0 161.08.63 219179.0 81.2 24 3

60024.000 609.624.00 610438.0 198.710.00 254221.0 100.27.00 (sw) 178140.0 63.56.00 (sw) 15260.0 27.236.00 (s) 914516.0 234.115.00 (s) 381251.0 113.9630.0 mm 424.803 630.024.80 630545.0 247.210.25 261255.2 115.7 14 60 350 1500For AGS ftting information, see publication 20.052 Gooseneck design, end-to-end dimension ttings in this size, contact your nearest Victaulic sales representative. 3 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.4 Chinese standard sizesGeneral NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded7victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comReducing Base Support ElbowNo. R-10G Grv. Grv.No. R-10F Grv. FlangeC to EHB Dia.C to EHB Dia.No. R-10G No. R-10FSizeNo. R-10 Reducing Base Support Elbow Approx. Weight EachNominal Size C to E H B Diameter Grv. x Grv. Grv. x Flangeinches mminches mminches mminches mmlbs. kglbs. kg6 150x4 1009.00 2291.25 321.50 3819.0 8.633.0 15.0 5 1259.00 2291.50 381.50 3823.0 10.438.0 17.28 200x6 15010.50 2672.13 241.50 3833.0 15.052.0 23.610 250x8 20012.00 3052.40 611.50 3861.0 27.788.0 39.9Adapter ElbowNo. 18 90 Adapter Elbow No. 19 45 Adapter ElbowC toTEC toGEC toGEC toTENo. 18 No. 19SizeNo. 18 90 Adapter Elbow 5 No. 19 45 Adapter Elbow 5 Nominal SizeActual Outside Diameter C to GE C to TEApprox. Weight Each C to GE C to TEApprox. Weight Eachinches mminches mminches mminches mmlbs. kginches mminches mmlbs. kg 201.050 26.92.25 572.25 570.5 0.21.50 381.50 380.5 0.21 251.315 33.72.25 572.25 570.5 0.2 1 321.660 42.42.75 702.75 700.9 0.4 1 401.900 48.32.75 702.75 701.1 0.51.75 441.75 440.9 0.42 502.375 60.33.25 834.25 1082.5 1.1 2 652.875 73.03.75 953.75 953.0 1.42.25 572.25 572.3 1.03 803.500 88.94.25 1086.00 1525.8 2.62.50 644.25 1085.0 2.33 904.000 101.64.50 1146.25 1598.0 3.65.25 1335.25 1338.8 4.06 1506.625 168.36.50 1656.50 16517.6 8.03.50 893.50 8912.7 5.85 Available with British Standard Pipe Threads, specify BSP clearly on order.8victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comTees, Crosses and True WyesNo. 20 Tee No. 35 Cross No. 33 True Wye No. 29M Tee with Threaded BranchC to ECtoEC to EC to LEC toSEC toGEC to TENo. 20 No. 35 No. 33 No. 29MSizeNo. 20 TeeNo. 35 Cross (sw)No. 33 True Wye (sw)No. 29M Tee with Threaded BranchNominal SizeActual Outside Diameter C to EApprox. Weight Each C to EApprox. Weight Each C to LE C to SEApprox. Weight Each C to GE C to TEApprox. Weight Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mminches mmlbs. kginches mminches mmlbs. kg 201.050 26.92.25 570.6 0.32.25 570.9 0.42.25 572.00 510.7 0.32.25 572.25 (sw) 570.6 0.31 251.315 33.72.25 571.0 0.52.25 571.3 0.62.25 572.25 571.1 0.52.25 572.25 571.0 0.51 321.660 42.42.75 701.5 0.72.75 702.1 1.02.75 702.50 641.5 0.72.75 702.75 701.5 0.71 401.900 48.32.75 702.0 0.92.75 702.5 1.12.75 702.75 701.8 0.82.75 702.75 702.0 0.92 502.375 60.33.25 833.0 1.43.25 833.8 1.73.25 832.75 702.5 1.13.25 834.25 1083.0 1.42 652.875 73.03.75 954.3 2.03.75 956.1 2.83.75 953.00 764.3 2.03.75 953.75 954.3 2.076.1 mm3.000 76.13.75 955.2 2.4 3.75 953.75 (sw) 955.2 2.43 803.500 88.94.25 1086.8 3.04.25 10810.5 4.84.25 1083.25 836.1 2.84.25 1086.00 1526.8 3.13 904.000 101.64.50 (sw) 1147.9 3.64.50 11411.5 5.24.50 1143.50 899.6 4.44.50 1144.50 (sw) 1147.9 3.6108.0 mm4.250 108.05.00 12715.5 7.0 5.00 1275.00 (sw) 12715.5 7.04 1004.500 114.35.00 12711.9 5.45.00 12715.8 7.25.00 1273.75 959.8 4.45.00 1277.25 18411.9 5.44 1205.000 127.05.25 (sw) 13315.0 6.85.25 13318.5 8.4 5.25 1335.25 (sw) 13315.0 6.8133.0 mm5.250 133.05.50 14017.8 8.1 5.50 1405.50 (sw) 14017.8 8.1139.7 mm5.500 139.75.50 14017.8 8.1 5.50 1405.50 (sw) 14017.8 8.15 1255.563 141.35.50 14017.8 8.15.50 14020.0 9.15.50 1404.00 10215.0 6.85.50 1405.50 (sw) 14017.8 8.1159.0 mm6.250 159.06.50 16527.1 12.3 6.50 1656.50 (sw) 16527.1 12.3165.1 mm6.500 165.16.50 16522.0 10.06.50 16528.0 12.7 6.50 1656.50 (sw) 16522.0 10.06 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.7 Chinese standard sizes9victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comC to ECtoEC to EC to LEC toSEC toGEC to TENo. 20 No. 35 No. 33 No. 29MSizeNo. 20 TeeNo. 35 Cross (sw)No. 33 True Wye (sw)No. 29M Tee with Threaded BranchNominal SizeActual Outside Diameter C to EApprox. Weight Each C to EApprox. Weight Each C to LE C to SEApprox. Weight Each C to GE C to TEApprox. Weight Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mminches mmlbs. kginches mminches mmlbs. kg6 1506.625 168.36.50 16525.7 11.76.50 16528.0 12.76.50 1654.50 11422.3 10.16.50 1656.50 (sw) 16525.7 11.78 2008.625 219.17.75 19747.6 21.67.75 19748.0 21.87.75 1976.00 15236.0 16.37.75 1977.75 19747.6 21.610 25010.750 273.09.00 22999.0 44.99.00 229121.5 55.19.00 2296.50 15569.9 31.79.00 2299.00 22999.0 44.912 30012.750 323.910.00 254133.0 60.310.00 254110.0 49.910.00 2547.00 17880.0 36.310.00 25410.00 254133.0 60.314 6

35014.000 355.611.00 (sw) 279145.0 65.811.00 279198.0 89.811.00 2797.50 191134.2 60.8 377.0 mm 377.011.50 292145.0 65.8 16 6

40016.000 406.412.00 (sw) 305186.0 84.412.00 305250.0 113.412.00 3058.00 203167.0 75.7 426.0 mm 7426.013.00 300186.0 84.4 18 6

45018.000 457.015.50 (sw) 394260.0 117.915.50 394350.0 158.815.50 3948.50 216234.0 106.1 480.0 mm 7480.014.63 372256.0 116.1 20 6

50020.000 508.017.25 (sw) 438336.0 152.417.25 438452.0 205.017.25 4389.00 229281.0 127.5 530.0 mm 7530.015.38 (sw) 391339.0 153.8 24 6

60024.000 610.020.00 (sw) 508592.0 268.520.00 508795.0 360.620.00 50810.00 254523.0 237.2 630.0 mm 7630.017.38 (sw) 441473.0 214.5 14 60 350 1500For AGS tting information, see publication 20.056 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.7 Chinese standard sizesGeneral NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded10victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comReducing TeeNo. 25 Grooved Branch No. 29T Threaded BranchC to ECtoEC to ECtoENo. 25 No. 29TSizeNo. 25 Std.No. 29T w/ Thd. BranchApprox. Weight Each Nominal Size C to E C to Einches mminches mminches mmlbs. kg1 25x1 25x 202.25 (sw) 572.25 (sw) 571.0 0.51 32x1 32x1 252.75 (sw) 702.75 (sw) 701.3 0.61 40x1 40x 202.75 (sw) 702.75 (sw) 701.5 0.71 252.75 (sw) 702.75 (sw) 701.5 0.71 322.75 (sw) 702.75 (sw) 701.7 0.82 50x2 50x 203.25 833.25 832.5 1.11 253.25 833.25 832.7 1.21 323.25 (sw) 833.25 (sw) 831.8 0.81 403.25 833.25 (sw) 833.0 1.42 65x2 65x 203.75 (sw) 953.75 (sw) 953.9 1.81 253.75 953.75 (sw) 953.8 1.71 323.75 953.75 954.2 1.71 403.75 953.75 953.9 1.82 503.75 953.75 (sw) 954.5 2.03 80x3 80x 204.25 (sw) 1084.25 (sw) 1085.7 2.61 254.25 1084.25 1086.1 2.81 324.25 1084.25 1088.0 3.61 404.25 1084.25 (sw) 1086.5 2.92 504.25 1084.25 (sw) 1086.2 2.82 654.25 1084.25 (sw) 1086.4 2.98 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.9 Cast tting available. Contact Victaulic for details.C to ECtoEC to ECtoENo. 25 No. 29TSizeNo. 25 Std.No. 29T w/ Thd. BranchApprox. Weight Each Nominal Size C to E C to Einches mminches mminches mmlbs. kg4 100x4 100x 205.00 (sw) 1275.00 (sw) 1278.0 3.61 255.00 1275.00 1277.8 3.51 325.00 (sw) 1275.00 (sw) 1279.6 4.41 405.00 1275.00 12710.2 4.62 505.00 1275.00 12711.2 5.12 655.00 1275.00 12711.4 5.23 805.00 1275.00 12711.6 5.35 125x5 125x1 255.50 (sw) 1405.50 (sw) 14014.0 6.41 405.50 (sw) 1405.50 (sw) 14014.3 6.52 505.50 (sw) 1405.50 (sw) 14014.5 6.62 655.50 1405.50 (sw) 14015.2 6.93 805.50 1405.50 (sw) 14016.6 7.54 1005.50 1405.50 (sw) 14016.7 7.66 150x6 150x1 256.50 (sw) 1656.50 (sw) 16523.0 10.41 406.50 (sw) 1656.50 (sw) 16524.0 10.92 506.50 1656.50 16521.6 9.82 656.50 1656.50 16521.4 11.73 806.50 1656.50 16526.5 12.04 1006.50 1656.50 16525.0 11.35 1256.50 1656.50 16523.2 10.56 165.1x6 165.1x3 806.50 1656.50 (sw) 16524.0 10.94 1006.50 1656.50 (sw) 16525.0 11.38 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.9 Cast tting available. Contact Victaulic for details.11victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comC to ECtoEC to ECtoENo. 25 No. 29TSizeNo. 25 Std.No. 29T w/ Thd. BranchApprox. Weight Each Nominal Size C to E C to Einches mminches mminches mmlbs. kg8 200x8 200x1 407.75 (sw) 1977.75 (sw) 19733.0 15.02 507.75 (sw) 1977.75 (sw) 19733.5 15.22 657.75 (sw) 1977.75 (sw) 19739.0 17.73 807.75 (sw) 1977.75 (sw) 19733.6 15.24 1007.75 1977.75 19741.8 19.05 1257.75 (sw) 1977.75 (sw) 19734.0 15.46 1507.75 1977.75 19742.3 19.2165.17.75 (sw) 1977.75 (sw) 19748.0 21.810 250x10 250x1 409.00 2299.00 22962.0 28.12 509.00 (sw) 2299.00 (sw) 22962.0 28.12 659.00 (sw) 2299.00 (sw) 22962.4 28.33 809.00 (sw) 2299.00 (sw) 22960.0 27.24 1009.00 (sw) 2299.00 (sw) 22961.0 27.75 1259.00 (sw) 2299.00 (sw) 22952.0 23.66 1509.00 (sw) 2299.00 (sw) 22959.0 26.88 2009.00 (sw) 2299.00 (sw) 22964.7 29.312 300x12 300x1 2510.00 (sw) 25410.00 (sw) 25477.0 34.92 5010.00 (sw) 25410.00 (sw) 25480.0 36.32 6510.00 (sw) 25410.00 (sw) 25478.0 35.43 8010.00 (sw) 25410.00 (sw) 25482.0 37.24 10010.00 (sw) 25410.00 (sw) 25480.0 36.35 12510.00 (sw) 25410.00 (sw) 25475.0 34.06 15010.00 (sw) 25410.00 (sw) 25475.0 34.08 20010.00 (sw) 25410.00 (sw) 25480.0 36.310 25010.00 (sw) 25410.00 (sw) 25484.0 38.18 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.9 Cast tting available. Contact Victaulic for details.C to ECtoEC to ECtoENo. 25 No. 29TSizeNo. 25 Std.No. 29T w/ Thd. BranchApprox. Weight Each Nominal Size C to E C to Einches mminches mminches mmlbs. kg14 8

350x14 350x4 10011.00 (sw) 27911.00 (sw) 279102.0 46.36 15011.00 (sw) 27911.00 (sw) 279108.2 49.18 20011.00 27911.00 279112.0 50.810 25011.00 27911.00 279120.0 54.412 30011.00 27911.00 279129.1 58.616 8

400x16 400x4 10012.00 30512.00 305130.0 59.06 15012.00 (sw) 30512.00 (sw) 305133.5 60.68 20012.00 30512.00 305145.0 65.810 25012.00 30512.00 305149.5 67.812 30012.00 30512.00 305154.0 69.914 35012.00 (sw) 305167.0 75.818 8

450x18 450x4 10015.50 (sw) 39415.50 (sw) 394194.0 88.06 15015.50 (sw) 39415.50 (sw) 394200.0 90.78 20015.50 (sw) 39415.50 (sw) 394202.0 91.610 25015.50 39415.50 394212.0 96.212 30015.50 39415.50 394222.6 101.014 35015.50 394230.1 104.416 40015.50 394247.6 112.320 8

500x20 500x6 15017.25 43817.25 438240.0 108.98 20017.25 43817.25 438244.0 110.710 25017.25 43817.25 438256.0 116.112 30017.25 43817.25 438264.0 119.814 35017.25 438275.0 124.716 40017.25 438288.6 130.918 45017.25 438297.0 134.78 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.9 Cast tting available. Contact Victaulic for details.12victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comC to ECtoEC to ECtoENo. 25 No. 29TSizeNo. 25 Std.No. 29T w/ Thd. BranchApprox. Weight Each Nominal Size C to E C to Einches mminches mminches mmlbs. kg24 8

600x24 600x8 20020.00 50820.00 508340.0 154.210 25020.00 50820.00 508343.9 156.012 30020.00 50820.00 508352.8 160.014 9

35020.00 508360.0 163.316 40020.00 508378.0 171.518 9

45020.00 508380.0 172.420 50020.00 508373.0 169.214 60 350 1500For AGS tting information, see publication 20.058 For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.9 Cast tting available. Contact Victaulic for details.General NotesNo. 29T Threaded Outlet Reducing Tees are supplied NPT and are available with British Standard threads. For British Standard specify BSP clearly on order.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally WeldedBull PlugNo. 61E to ENo. 61SizeNo. 61 Bull Plug (s)Nominal SizeActual Outside Diameter E to EApprox. Weight Eachinches mminches mminches mmlbs. kg2 502.375 60.34.00 1022.5 1.12 652.875 73.05.00 1273.0 1.43 803.500 88.96.00 1524.5 2.04 1004.500 114.37.00 1787.5 3.45 1255.563 141.38.00 20312.0 5.46 1506.625 168.510.00 25417.0 7.7General NotesSteel dish caps available through 24/600 mm, contact Victaulic.No. 61 Bull Plugs should be used in vacuum service with Style 72 or 750 couplingsNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded13victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.com45 LateralNo. 30C to LEC toLEC toSENo. 30SizeNo. 30 45 Lateral Nominal SizeActual Outside Diameter C to LE C to SEApprox. Weight Eachinches mminches mminches mminches mmlbs. kg 201.050 26.94.50 (sw) 1142.00 (sw) 511.0 0.51 251.315 33.75.00 (sw) 1272.25 (sw) 571.7 0.81 321.660 42.45.75 1462.50 642.5 (d) 1.11 401.900 48.36.25 (sw) 1592.75 (sw) 703.5 1.62 502.375 60.37.00 (sw) 1782.75 (sw) 705.0 2.32 652.875 73.07.75 (sw) 1973.00 (sw) 769.0 4.176.1 mm3.000 76.18.50 (sw) 2163.25 (sw) 8311.0 5.03 803.500 88.98.50 2163.25 8311.7 (d) 5.43 904.000 101.610.00 (sw) 2543.50 (sw) 8917.8 8.14 1004.500 114.310.50 2673.75 9522.2 (d) 10.15 1205.563 141.312.50 (sw) 3184.00 (sw) 10221.8 9.910For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.C to LEC toLEC toSENo. 30SizeNo. 30 45 Lateral Nominal SizeActual Outside Diameter C to LE C to SEApprox. Weight Eachinches mminches mminches mminches mmlbs. kg165.1 mm6.500 165.114.00 (sw) 3564.50 (sw) 11443.6 19.86 1506.625 168.314.00 (sw) 3564.50 (sw) 11443.6 49.88 2008.625 219.118.00 (sw) 4576.00 (sw) 15272.0 32.710 25010.750 273.020.50 (sw) 5216.50 (sw) 165105.0 47.612 30012.750 323.923.00 (sw) 5847.00 (sw) 178165.0 74.814 10

35014.000 355.626.50 (sw) 6737.50 (sw) 191276.0 125.216 10

40016.000 406.429.00 (sw) 7378.00 (sw) 203344.2 156.118 10

45018.000 457.032.00 (sw) 8138.50 (sw) 216429.0 194.620 10

50020.000 508.035.00 (sw) 8899.00 (sw) 229500.0 226.824 10

60024.000 610.040.00 (sw) 101610.00 (sw) 254715.0 324.314 60 350 1500For AGS tting information, see publication 20.0510For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.General NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded14victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.com45 Reducing LateralNo. 30-RC to LEC toLEC toSENo. 30-RSizeNo 30-R 45 Reducing Lateral Nominal Size C to LE C to SEApprox. Weight Eachinches mminches mminches mmlbs. kg3 80x3 80x2 508.50 2163.25 839.8 4.42 658.50 2163.25 839.8 4.44 100x4 100x2 5010.50 2673.75 9510.0 4.52 6510.50 2673.75 9510.0 4.53 8010.50 2673.75 9518.3 8.35 125x5 125x2 5012.50 3184.00 10224.0 10.93 8012.50 3184.00 10227.0 12.24 10012.50 3184.00 10226.5 12.06 150x6 150x3 8014.00 3564.50 11437.0 16.84 10014.00 3564.50 11436.0 16.35 12514.00 3564.50 11444.7 20.38 200x8 200x4 10018.00 4576.00 15262.0 28.15 12518.00 4576.00 15275.5 34.26 15018.00 4576.00 15282.0 37.210 250x10 250x4 10020.50 5216.50 165104.8 47.55 12520.50 5216.50 16599.0 44.96 15020.50 5216.50 165105.8 48.08 20020.50 5216.50 165118.0 53.512 300x12 300x5 12523.00 5847.00 178122.0 55.36 15023.00 5847.00 178137.0 62.18 20023.00 5847.00 178147.0 66.710 25023.00 5847.00 178167.0 75.811For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.C to LEC toLEC toSENo. 30-RSizeNo 30-R 45 Reducing Lateral Nominal Size C to LE C to SEApprox. Weight Eachinches mminches mminches mmlbs. kg14 11

350x14 350x4 10026.50 6737.50 191172.0 78.06 15026.50 6737.50 191187.0 84.88 20026.50 6737.50 191205.8 93.410 25026.20 6737.50 191235.0 106.612 30026.50 6737.50 191250.0 113.416 11

400x16 400x6 15029.00 7378.00 203215.0 97.58 20029.00 7378.00 203252.5 114.510 25029.00 7378.00 203265.0 120.212 30029.00 7378.00 203295.0 133.814 35029.00 7378.00 203305.0 138.318 11

450x18 450x6 15032.00 8138.50 216274.0 124.38 20032.00 8138.50 216275.0 124.712 30032.00 8138.50 216347.0 157.414 35032.00 8138.50 216350.0 158.816 40032.00 8138.50 216362.0 164.220 11

500x20 500x12 30035.00 8899.00 229415.0 188.214 35035.00 8899.00 229420.0 190.516 40035.00 89910.00 229425.0 192.824 11

600x24 600x16 40040.00 101610.00 254425.0 192.820 60040.00 101610.00 254570.0 258.614 60 350 1500For AGS tting information, see publication 20.0511For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.15victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comTee WyeNo. 32HGE2E1No. 32SizeNo. 32 Tee Wye (sw)Nominal SizeG H E1E2Approx. Weight Eachinches mminches mminches mminches mminches mmlbs. kg2 50x2 50x2 502.75 707.00 1789.00 2294.63 1186.4 2.92 65x2 65x2 653.00 767.75 19710.50 2675.75 14611.5 5.23 80x3 80x3 803.25 838.50 21611.50 2926.50 16514.3 6.53 90x3 90x3 903.25 8910.00 25413.00 3307.75 19722.9 10.44 100x4 100x4 1003.75 9510.50 26713.63 3468.13 20726.0 11.85 125x5 125x5 1254.00 10212.50 31816.13 41010.00 25448.0 21.86 150x6 150x6 1504.50 11414.00 35618.25 46411.50 29260.5 27.48 200x8 200x8 2006.00 15218.00 45723.25 59115.25 387127.1 57.710 250x10 250x10 2506.50 16520.50 52127.25 69218.00 457190.0 86.212 300x12 300x12 3007.00 17823.00 58431.00 78720.50 521240.0 108.9General NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally WeldedAdapter NippleNo. 40 12 Grv. Thd.No. 42 Grv. Bev.No. 43 Grv. Grv.E to EE to EE to E No. 40 No.42 No.43SizeNo. 40, 42, 43 Adapter Nipple (s)Nominal SizeActual Outside Diameter E to EApprox. Weight Eachinches mminches mminches mminches mm 201.050 26.93.00 760.3 0.11 251.315 33.73.00 760.4 0.21 321.660 42.44.00 1020.8 0.41 401.900 48.34.00 1020.9 0.42 502.375 60.34.00 1021.2 0.52 652.875 73.04.00 1021.9 0.93 803.500 88.94.00 1022.5 1.13 904.000 101.64.00 1022.1 0.94 1004.500 114.36.00 1525.5 2.55 1255.563 141.36.00 1527.4 3.46 1506.625 168.36.00 1529.5 4.38 2008.625 219.16.00 15214.2 6.410 25010.750 273.08.00 20327.0 12.212 30012.750 323.98.00 20333.0 15.012Available with British Standard Pipe Threads, specify BSP clearly on order.General NotesFor pump package nipples with 1 /40 mm hole cut to receive Style 923 Vic-Let or Style 924 Vic-O-Well request special No. 40, 42 or 43 nipples and specify No. 40-H, 42-H or 43-H on order. NOTE: 4 12/100 300 mm diameter 8/200 mm minimum length required.For roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded16victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comCapNo. 60TNo. 60SizeNo. 60 CapNominal SizeActual Outside Diameter T ThicknessApprox. Weight Eachinches mminches mminches mmlbs. kg 201.050 26.90.88 220.2 0.11 251.315 33.70.88 220.3 0.11 321.660 42.40.88 220.3 0.11 401.900 48.30.88 220.5 0.22 502.375 60.30.88 220.6 0.32 652.875 73.00.88 221.0 0.576.1 mm3.000 76.10.88 221.2 0.53 803.500 88.90.88 221.2 0.53 904.000 101.60.88 222.5 1.1108.0 mm4.250 108.01.00 252.3 1.04 1004.500 114.31.00 252.5 1.1133.0 mm5.250 133.01.00 254.5 2.0139.7 mm5.500 139.71.00 254.5 2.05 1255.563 141.31.00 254.6 2.113For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.TNo. 60SizeNo. 60 CapNominal SizeActual Outside Diameter T ThicknessApprox. Weight Eachinches mminches mminches mmlbs. kg159.0 mm6.250 159.01.00 256.8 3.1165.1 mm6.500 165.11.00 257.3 3.36 1506.625 168.31.00 256.1 2.88 2008.625 219.11.19 3013.1 5.910 25010.750 273.01.25 3221.0 9.512 30012.750 323.91.25 3235.6 16.214 13

35014.000 355.69.50 (s) 241+16 13

40016.000 406.410.00 (s) 254+18 13

45018.000 457.011.00 (s) 279+20 13

50020.000 508.012.00 (s) 305+24 13

60024.000 610.013.50 (s) 343+14 60 350 1500For AGS tting information, see publication 20.0513For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.General NotesNo. 60 cap is not suitable for use in vacuum service with Style 72 or 750 couplings. No. 61 bull plugs should be used.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded+ Contact Victaulic for details.17victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comFlanged Adapter NippleNo. 41 ANSI Class 125 No. 45F ANSI Class 150 Flat Face No. 45R ANSI Class 150 Raised Face No. 46F ANSI Class 300 Flat Face No. 46R ANSI Class 300 Raised FaceE to E E to E E to E E to E E to E E to ENo. 41 No. 45F No. 45R No. 46F No. 46R No. 45RESizeNo. 41 ANSI 125 Flange Adapter NippleNo. 45F and No. 45R ANSI 150 Flanged Adapter Nipple (s)No. 46F and No. 46R ANSI 300 Flanged Adapter Nipple (s)No. 45RE Flanged Adapter Nipple (s)Nominal SizeActual Outside Diameter E to EApprox. Weight Each E to EApprox. Weight Each E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kg 201.050 26.93.00 763.00 762.3 1.03.00 763.3 1.5 1 251.315 33.73.00 762.5 1.13.00 762.7 1.23.00 763.9 1.8 1 321.660 42.44.00 1023.0 1.44.00 1023.3 1.54.00 1024.8 2.2 1 401.900 48.34.00 1023.5 1.64.00 1023.9 1.84.00 1026.9 3.1 2 502.375 60.34.00 1025.5 2.54.00 1026.0 2.74.00 1028.2 3.72.50 645.3 2.42 652.875 73.04.00 1028.0 3.64.00 1029.9 4.54.00 10211.9 5.4 76.1 mm3.000 76.1 2.50 646.5 2.93 803.500 88.94.00 1029.5 4.34.00 10211.7 5.34.00 10216.5 7.52.50 648.2 3.73 904.000 101.64.00 10212.0 5.44.00 10215.1 6.84.00 10220.1 9.1 4 1004.500 114.36.00 15216.7 7.66.00 15218.5 8.46.00 15227.4 12.42.75 7010.0 455 1255.563 141.36.00 15221.5 9.86.00 15221.3 9.76.00 15235.3 16.0 139.7 mm5.000 139.7 2.75 7016.3 7.46 1506.625 168.36.00 15226.5 12.06.00 15227.5 12.56.00 15247.5 21.52.75 7016.3 7.48 2008.625 219.16.00 15239.0 17.76.00 15241.3 18.86.00 15270.3 31.9 10 25010.750 273.08.00 20357.0 25.98.00 20359.3 27.18.00 203100.8 45.7 12 30012.750 323.98.00 20341.0 18.68.00 20340.0 40.08.00 203146.2 66.3 14 14

35014.000 355.68.00 2038.00 203+8.00 203+ 16 14

40016.000 406.48.00 2038.00 203+8.00 203+ 18 14

45018.000 457.08.00 2038.00 203+8.00 203+ 14For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.18victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comE to E E to E E to E E to E E to E E to ENo. 41 No. 45F No. 45R No. 46F No. 46R No. 45RESizeNo. 41 ANSI 125 Flange Adapter NippleNo. 45F and No. 45R ANSI 150 Flanged Adapter Nipple (s)No. 46F and No. 46R ANSI 300 Flanged Adapter Nipple (s)No. 45RE Flanged Adapter Nipple (s)Nominal SizeActual Outside Diameter E to EApprox. Weight Each E to EApprox. Weight Each E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mminches mmlbs. kginches mmlbs. kginches mmlbs. kginches mmlbs. kg20 14

50020.000 508.08.00 2038.00 203+8.00 203+ 24 14

60024.000 610.08.00 2038.00 203+8.00 203+ 14 60 350 1500For AGS tting information, see publication 20.05 14For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.General NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded+ Contact Victaulic for details.19victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comSwaged NippleNo. 53 Grv. Grv. No. 54 Grv. Thd. No. 55 Thd. Grv.E to E E to E E to ENo. 53 No. 54 No. 55SizeNo. 53, 54, and 55 Swaged Nipples (s)Nominal Sizes E to EApprox. Weight Eachinches mminches mmlbs. kg2 50x1 256.50 1652.0 0.91 326.50 1652.0 0.91 406.50 1652.0 0.92 65x1 257.00 1783.0 1.41 327.00 1783.0 1.41 407.00 1783.0 1.42 507.00 1783.0 1.43 80x1 258.00 2034.5 2.01 328.00 2034.5 2.01 408.00 2034.5 2.02 508.00 2034.5 2.02 658.00 2034.5 2.03 90x3 808.00 2036.8 3.14 100x1 259.00 2297.5 3.41 329.00 2297.5 3.41 409.00 2297.5 3.42 509.00 2297.5 3.42 659.00 2297.5 3.43 809.00 2297.5 3.43 909.00 2297.5 3.4E to E E to E E to ENo. 53 No. 54 No. 55SizeNo. 53, 54, and 55 Swaged Nipples (s)Nominal Sizes E to EApprox. Weight Eachinches mminches mmlbs. kg5 125x2 5011.00 27911.5 5.23 8011.00 27911.3 5.14 10011.00 27911.5 5.26 150x1 2512.00 30517.0 7.71 3212.00 30517.0 7.71 4012.00 30517.2 7.82 5012.00 30517.4 7.92 6512.00 30517.4 7.93 8012.00 30517.4 7.93 9012.00 30517.4 7.94 10012.00 30517.5 7.94 12012.00 30517.5 7.95 12512.00 30517.5 7.98 200x6 150+20.0 9.1General NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded+ Contact Victaulic for details.20victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comFemale Threaded AdapterNo. 80E to ENo. 80Size No. 80 Female Threaded AdapterNominal SizeActual Outside Diameter E to EApprox. Weight Eachinches mminches mminches mmlbs. kg 201.050 26.92.00 511.0 0.51 251.315 33.72.06 521.0 0.51 321.660 42.42.31 (sw) 591.5 0.71 401.900 48.32.31 (sw) 591.5 0.72 502.375 60.32.50 641.4 0.62 652.875 73.02.75 701.5 0.73 803.500 88.92.75 702.9 1.34 1004.500 114.33.25 834.5 2.0General NotesAvailable with British Standard Pipe Threads, specify BSP clearly on order.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally WeldedHose NippleNo. 48E to ENo. 48Size No. 48 Hose Nipple (s)Nominal SizeActual Outside Diameter E to EApprox. Weight Eachinches mminches mminches mmlbs. kg 201.050 26.93.12 790.3 0.11 251.315 33.73.38 860.4 0.21 321.660 42.43.88 980.6 0.31 401.900 48.33.88 980.8 0.42 502.375 60.34.50 1141.1 0.52 652.875 73.05.38 1372.0 0.93 803.500 88.95.75 1463.2 1.54 1004.500 114.37.00 1784.9 2.25 1255.563 141.38.75 2228.0 3.66 1506.625 168.310.13 25714.3 6.58 2008.625 219.111.88 30224.7 11.210 25010.750 273.012.50 31840.1 18.212 30012.750 323.914.50 36862.0 28.1General NotesNote: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded21victaulic.com07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comConcentric/Eccentric ReducerNo. 50 Concentric No. 51 EccentricEto EE to EE to E E to ENo. 50 No. 51Fabricated Steel No. 50Fabricated Steel No. 51SizeNo. 50 Concentric Reducer No. 51 Eccentric ReducerNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kginches mmlbs. kg1 32x 20+1.9 0.9 1 25+1.9 0.9 1 40 x 20+1.4 0.6 1 252.50 640.8 0.48.50 (sw) 2164.5 2.01 322.50 641.0 0.5 2 50 x 202.50 640.9 0.39.00 (sw) 2292.0 0.91 252.50 640.7 0.39.00 (sw) 2292.3 1.01 322.50 641.2 0.59.00 (sw) 2294.6 2.11 403.50 891.0 0.53.50 891.1 0.52 65x 20+1.3 0.6+3.3 1.51 252.50 641.1 0.59.50 2413.5 1.61 323.50 893.3 1.53.50 891.4 0.61 402.50 643.6 1.69.50 (sw) 2413.7 1.72 502.50 643.9 1.83.50 894.3 2.03 80x 20+1.5 0.7+4.5 2.01 252.50 641.3 0.69.50 (sw) 2414.8 2.21 322.50 641.4 0.6+4.8 2.21 402.50 645.1 2.39.50 (sw) 2415.1 2.32 502.50 641.6 0.73.50 896.0 2.72 652.50 641.8 0.83.50 897.0 3.276.12.50 642.1 1.0 3 90x3 802.50 642.0 0.99.50 (sw) 2417.0 3.24 100x1 253.00 763.0 1.413.00 (sw) 3306.5 2.915For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.Eto EE to EE to E E to ENo. 50 No. 51Fabricated Steel No. 50Fabricated Steel No. 51SizeNo. 50 Concentric Reducer No. 51 Eccentric ReducerNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kginches mmlbs. kg1 32+4.6 2.1 1 403.00 (sw) 762.6 1.210.00 (sw) 2548.1 3.72 503.00 762.4 1.14.00 1023.3 1.52 653.00 762.7 1.24.00 1023.4 1.53 803.00 763.2 1.44.00 1023.5 1.63 903.00 762.9 1.310.00 (sw) 2548.0 3.65 125x2 5011.00 (sw) 2799.0 4.111.00 (sw) 2795.2 2.42 654.00 1024.3 2.011.00 (sw) 27910.8 4.93 804.00 1025.5 2.511.00 (sw) 27911.1 5.04 1003.50 894.3 1.95.00 12712.0 5.46 150x1 254.00 1025.0 2.311.50 (sw) 29214.5 6.61 40+5.5 2.5+ +2 504.00 1026.6 3.011.50 (sw) 29214.5 6.62 654.00 1026.4 2.911.50 (sw) 29214.2 6.43 804.00 1026.4 2.95.50 14015.0 6.84 1004.00 1026.5 2.95.50 14017.0 7.75 1254.00 1026.4 2.95.50 14017.0 7.78 200x2 6516.00 4067.9 3.612.00 (sw) 30526.1 11.83 805.00 1279.3 4.212.00 (sw) 30522.0 10.04 1005.00 12710.4 4.812.00 (sw) 30523.0 10.45 1255.00 12711.6 5.212.00 (sw) 30523.0 10.46 1505.00 12711.9 5.46.00 15224.0 10.915For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.22victaulic.com 07.01 1449Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comEto EE to EE to E E to ENo. 50 No. 51Fabricated Steel No. 50Fabricated Steel No. 51SizeNo. 50 Concentric Reducer No. 51 Eccentric ReducerNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kginches mmlbs. kg10 250x4 1006.00 15219.7 8.913.00 (sw) 33032.0 14.55 125+33.0 15.0+34.6 15.76 1506.00 15220.0 9.113.00 (sw) 33036.9 16.78 2006.00 15222.0 10.07.00 17821.6 9.812 300x4 100+44.0 20.014.00 (sw) 35648.0 21.86 1507.00 17824.6 11.214.00 (sw) 35650.0 22.78 2007.00 17852.0 23.614.00 (sw) 35653.5 24.310 2507.00 17839.0 17.714.00 (sw) 35657.0 25.914 350x6 15013.00 33065.0 29.513.00 33060.0 27.28 20013.00 33065.0 29.513.00 33060.0 27.210 25013.00 33066.0 29.913.00 33065.0 29.512 30013.00 33068.0 30.813.00 33066.0 29.916 400x8 20014.00 35673.0 33.114.00 35573.0 33.110 25014.00 35673.0 33.114.00 35573.0 33.112 30014.00 35673.0 33.114.00 35573.0 33.114 35014.00 35673.0 33.114.00 35573.0 33.118 450x10 25015.00 38191.0 41.315.00 38191.0 41.312 30015.00 38191.0 41.315.00 38191.0 41.314 35015.00 38191.0 41.315.00 38191.0 41.316 40015.00 38191.0 41.315.00 38191.0 41.315For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.Eto EE to EE to E E to ENo. 50 No. 51Fabricated Steel No. 50Fabricated Steel No. 51SizeNo. 50 Concentric Reducer No. 51 Eccentric ReducerNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kginches mmlbs. kg20 500x10 25020.00 508110.0 49.920.00 508177.0 80.312 30020.00 508120.0 54.420.00 508120.0 54.414 35020.00 508149.0 67.920.00 508149.0 67.916 40020.00 508120.0 54.420.00 508120.0 54.418 45020.00 508136.0 61.720.00 508136.0 61.724 600x10 25020.00 508142.0 64.420.00 508142.0 64.412 30020.00 508150.0 68.020.00 508150.0 68.014 35020.00 508162.0 73.520.00 508162.0 73.516 40020.00 508162.0 73.520.00 508162.0 73.518 45020.00 508162.0 73.520.00 508162.0 73.520 50020.00 508151.0 68.520.00 508190.0 86.214 60 350 1500For AGS tting information, see publication 20.0515For 14"/350 mm and larger roll grooved systems, Victaulic offers the Advanced Groove System (AGS). For pricing and availability of cut groove ttings in this size, contact your nearest Victaulic sales representative.General NotesAvailable with male threaded small end No. 52.Cast tting available for JIS size. Contact Victaulic for details.Steel eccentric reducers available through 30/750 mm, contact Victaulic for dimensions.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded+ Contact Victaulic for details.23victaulic.com 07.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comSmall Threaded ReducerNo. 52 No. 52FEto EEto ENo. 52 No 52FSizeNo. 52Small Threader ReducerNo. 52F Concentric Reducer with BSPT Female Threaded EndNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kg mm kg1 40x1 252.50 640.8 0.4 1 322.50 640.9 0.4 2 50x 202.50 640.9 0.4 1 252.50 640.7 0.3 1 322.50 641.2 0.5 1 402.50 641.0 0.5 2 65x1 252.50 641.1 0.5 1 322.50 (sw) 641.2 0.5 1 402.50 (sw) 641.3 0.6 2 502.50 641.4 0.6 76.1 x 48.3 64 0.8 64 0.8 60 64 0.93 80x 20+ (sw)1.5 0.7 1 252.50 641.3 0.6 1 322.50 641.5 0.7 2 402.50 (sw) 641.5 0.7 2 502.50 641.5 0.7 2 652.50 642.4 1.1 88.9 x 42.4 64 0.9 64 0.848.3 64 0.9 64 0.960 64 0.9Eto EEto ENo. 52 No 52FSizeNo. 52Small Threader ReducerNo. 52F Concentric Reducer with BSPT Female Threaded EndNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kg mm kg4 100x1 253.00 762.3 1.0 1 403.00 762.7 1.2 2 503.00 762.6 1.2 2 653.00 762.6 1.2 3 803.00 762.5 1.1 108.0 x 42.4 76 1.3 76 1.348.3 76 1.3 76 1.460 76 1.4114.3 x 42.4 76 1.3 76 1.348.3 76 1.3 76 1.360 76 1.3 76 1.45 125x4 100+4.5 2.0 133.0 x 60 114 2.2139.0 x 60 114 2.36 150x1 254.00 1025.5 2.5 2 504.00 1025.7 2.6 2 654.00 1025.8 2.6 3 804.00 1025.8 2.6 4 100+ (sw)6.5 2.9 5 125+ (sw)2.0 0.9 159.0 x 42.4 114 2.2 144 2.548.3 114 2.2 114 2.560 114 2.6Note This product shall be manufactured by Victaulic or to Victaulic specications. All products to be installed in accordance with current Victaulic installation/assembly instructions. Victaulic reserves the right to change product specications, designs and standard.equipment without notice and without incurring obligationsInstallation Reference should always be made to the Victaulic installation handbook or installation instructions of the product you are installing. Handbooks are included with each shipment of Victaulic products, providing complete installation and assembly data, and are available.in PDF format on our website at www.victaulic.comWarranty.Refer to the Warranty section of the current Price List or contact Victaulic for detailsTrademarks Victaulic and all other Victaulic marks are the trademarks or registered trademarks of.Victaulic Company, and/or its afliated entities, in the U.S. and/or other countriesUser Responsibility for Product Selection and Suitability Each user bears nal responsibility for making a determination as to the suitability of Victaulic products for a particular end-use application, in accordance with industry standards and project specications, as well as Victaulic performance, maintenance, safety, and warning instructions. Nothing in this or any other document, nor any verbal recommendation, advice, or opinion from any Victaulic employee, shall be deemed to alter, vary, supersede, or waive any provision of Victaulic Company's standard conditions of sale,.installation guide, or this disclaimerIntellectual Property Rights No statement contained herein concerning a possible or suggested use of any material, product, service, or design is intended, or should be constructed, to grant any license under any patent or other intellectual property right of Victaulic or any of its subsidiaries or afliates covering such use or design, or as a recommendation for the use of such material, product, service, or design in the infringement of any patent or other intellectual property right. The terms Patented or Patent Pending refer to design or utility patents or patent.applications for articles and/or methods of use in the United States and/or other countries2407.01 1449 Rev Y Updated 03/2015 2015 Victaulic Company. All rights reserved.victaulic.comvictaulic.com24Eto EEto ENo. 52 No 52FSizeNo. 52Small Threader ReducerNo. 52F Concentric Reducer with BSPT Female Threaded EndNominal Size E to EApprox. Weight Each E to EApprox. Weight Eachinches mminches mmlbs. kg mm kg165.1 x 42.4 102 2.4 102 2.948.3 102 2.6 102 3.060 102 3.08 200x2 5016.00 4061.5 0.7 2 6516.00 4061.7 0.8 General NotesAvailable with British Standard Pipe Threads, specify BSP clearly on order.Note: All ttings are ductile iron unless otherwise noted with an (sw) or (s).(s) = Carbon Steel Direct Roll Groove (OGS)(sw) = Carbon Steel Segmentally Welded+ Contact Victaulic for details.