Esab Chrome Moly electrode Brochure

21
YOUR CHOICE FOR CREEP RESISTANT FILLER METALS Cr-Mo Welding Electrodes for the Power Generating Industry ESAB Welding & Cutting Products WELDING l CUTTING l FILLER

description

Details about chrome moly electrodes

Transcript of Esab Chrome Moly electrode Brochure

Page 1: Esab Chrome Moly electrode Brochure

YOUR CHOICE FOR CREEP RESISTANT FILLER METALS

Cr-Mo Welding Electrodesfor the Power Generating Industry

ESAB Welding & Cutting Products

WELDING l CUTTING l FILLER

Page 2: Esab Chrome Moly electrode Brochure

TABlE of ConTEnTS PoWEr gEnErATion

Description PageProcess Description ......................................................................................................................1Cr-Mo Selection guide ..................................................................................................................2Product offering

.5% Mo ...................................................................................................................................3-51.25% Cr, .5% Mo ..................................................................................................................6-92.25% Cr, 1% Mo ...............................................................................................................10-135% Cr, .5% Mo ...................................................................................................................14-169% Cr - 1% Mo ...................................................................................................................17-18Modified 9% Cr-Mo-V .........................................................................................................19-25

Certified Material Test Report (CMTR)Atom Arc 9015-B9 ...................................................................................................................26Atom Arc 9018-B9 ...................................................................................................................27Dual Shield B9 ........................................................................................................................28Tigrod ER90S-B9 ....................................................................................................................29

Creep Data ChartAtom Arc 9015-B9 ...................................................................................................................30Atom Arc 9018-B9 ...................................................................................................................30Dual Shield B9 ........................................................................................................................30Tigrod ER90S-B9 ....................................................................................................................30

ASME CertificatesAshtabula, OH facility ..............................................................................................................31Hanover, PA facility .................................................................................................................32

Safety Data Sheets ......................................................................................................................33

FOR MORE INFORMATION -

Contact: ESAB Welding & Cutting Products Customer Service Center P. O. Box 517 801 Wilson Avenue Hanover, PA 17331

TELEPHONE: 717/637-8911 (General Office) 800/933-7070 (Customer Service - TOLL FREE) FACSIMILE: 800/444-8911 (Customer Service - TOLL FREE)

The information contained herein is based on data and information developed in the laboratories of ESAB Welding & Cutting Products (“Seller”), but is presented without guarantee or warranty and the Seller makes no recommendation for and disclaims any liability incurred from any use thereof, including without limitation, any use in a commercial process not controlled by the Seller, and any use in violation of any existing patent, foreign or domestic, or of applicable laws and regulations.

THE SELLER MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, EXCEPT AS EXPRESSLY STATED IN SELLER’S CONTRACT OR SALES ACKNOWLEDGMENT FORM.

Page 3: Esab Chrome Moly electrode Brochure

1

esabna.com + 1.800.ESAB.123

making darkness disappear.

In the harsh environments of the power generation world, even everyday jobs aren’t simple. Fortunately, your choice of a welding and cutting manufacturer is. As the global authority on welding and cutting, ESAB offers the broadest selection of world-class products that meet the tough demands of the industry. From turbine plants to nuclear containment vessels, choose ESAB for powerful solutions.

When you use ESAB products, amazing things happen.

WELdINg + CUTTINg + AUTOMATION = POWER gENERATION SOLUTIONS

Power generation TechnologyCreep resistant steels were originally developed to provide improved strength at elevated temperatures. These creep resistant steels were metallurgically designed with additions of chromium, molybdenum and other similar alloys to produce the needed strength and creep resistance required in most steam generating facilities. Applications include heat exchangers, header systems, and associated piping within a power generation facility. Some of the most common grades of creep resistant steels include P11, P22, P5 and P91. Each of these grades has a varying amount of Cr-Mo and other assorted alloys added.Creep resistant steels require the use of comparable filler metals that perform at the same level as that of the steel. It is essential that the choice of filler metals complement the steels while optimizing the creep resistance. In addition, the mechanical properties of the filler materials should adequately produce the toughness needed during the start-up phase of the plant equipment.

Because of the wide variety of creep resistant steel types, the selection of filler materials is also varied. Historically products such as 1.25% Cr, .5% Mo or 2.25% Cr, 1% Mo would have been used. Today however, due to the increased demand for energy, utilities are operating their facilities under peak load conditions causing them to choose another grade such as P91 over one of the other creep resistant steels.The designation most often associated for the applicable filler metals for welding P91 grade steels is a “B9”. ESAB offers a complete line of “B9” filler metals for the SMAW, GTAW, FCAW and SAW processes. Each of these products is tested in accordance to the respective AWS specification and can be certified to the respective ASME specification, if need be. Each lot of material is lot tested and certified prior to the sale. If additional testing is required, ESAB can accommodate such testing. Throughout the years, the Atom Arc®, Arcaloy® and Dual Shield® brand names have been synonymous with both fossil fuel facilities and nuclear power plants. The engineering design built into these products has provided fabricators with the highest level of reliability possible.The technical information contained within this catalog provides the supporting data to substantiate our vast knowledge and experience in the development of products to support the power generation industry. Since all such product is produced in accordance with the ASME Quality Assurance System, customers can take comfort in the fact that these products meet or exceed their most stringent specifications. Feel free to contact us for further information or to discuss a specific application.

PoWEr gEnErATion TEChnology

Page 4: Esab Chrome Moly electrode Brochure

2 3

Cr-Mo AlloySElECTion guiDE

ESAB Product reference Chart

Type of Steel Grade

ASME Section

IX SMAW GMAW/GTAW SAW/Flux FCAW MCAW

1/2 % Mo 2 P#3 Atom Arc 7018-Mo Spoolarc 83 OK Flux 10.62/Spoolarc 40B Dual Shield 7000-A1 Coreweld 80-D2

1/2%Cr-1/2% Mo 11 P#3 Atom Arc 8018-CM Atom Arc 7018-B2L Tigrod ER80S-B2

OK Flux 10.62/ Spoolarc U515 OK Flux 10.63/ Spoolarc U515

Dual Shield 8000-B2 Dual Shield 8000-B2L Coreweld 80-B2

1-1/4% Cr-1/2% Mo 11 P#4 Atom Arc 8018-CM Atom Arc 7018-B2L Tigrod ER80S-B2

OK Flux 10.62/ Spoolarc U515 OK Flux 10.63/ Spoolarc U515

Dual Shield 8000-B2 Dual Shield 8000-B2L Coreweld 80-B2

2-1/4% Cr-1% Mo 22 P#5A Atom Arc 9018-CM Atom Arc 8018-B3L Tigrod ER90S-B3

OK Flux 10.62/ OK Autrod 13.20SC

OK Flux 10.63/ OK Autrod 13.20SC

Dual Shield 9000-B3 Coreweld 90-B3

3% Cr-1% Mo 21 P#5A Atom Arc 8018-B6 Atom Arc 8018-B6L Tigrod ER80S-B6 Dual Shield B6

5% Cr-1/2% Mo 5 P#5B Atom Arc 8018-B6 Atom Arc 8018-B6L Tigrod ER80S-B6 Dual Shield B6

9% Cr-1% Mo 9 P#5B Atom Arc 8018-B8 Tigrod ER80S-B8

9% Cr-1% Mo-V-Nb-N 91 P#5B Atom Arc 9015-B9 Atom Arc 9018-B9 Tigrod ER90S-B9 Dual Shield B9

NOTES

+ These creep resistant alloys are used in high temperature service used in hydrocarbon power generation facilites

+ Customer applications may require additional mechanical testing in accordance to ASME or a one-of-a-kind customer specification

+ X-Factor values (< 15) are provided on most of the products listed above

+ Both ESAB Hanover and Ashtabula are currently ASME facilities

+ Some diameters and packages may be special order items. Consult Order Entry Department for product availability

AToM ArC® 7018-Mo

Atom Arc 7018-Mo electrodes contain 0.5% Mo as alloy addition. They are recommended for welding low-alloy, high tensile steels of 50 ksi (345 MPa) minimum yield strength and 0.5% molybdenum steels and pipes. They are widely employed in the fabrication and erection of boilers, pressure piping and tubing, and other pressure vessel applications.

Classification and ApprovalsMIL-E-0022200/7 MIL-7018-A1 �A.B.S.- AWS A5.5: E7018-A1 �AWS/ASME SFA 5.5: E7018-A1H4R �

Complimentary ProductsGTAW (Spoolarc 83)FCAW (Dual Shield 7000-A1)SAW (Spoolarc 40B)

Preheat informationPreheat should be used on hardenable steels to prevent the formation of a hard heat-affected zone. Preheat may also be required in welding heavy sections.

Electrode imprint Marking7018-A1H4R

Typical Mechanical Properties As Welded

ksi MPa

Yield Strength 77 531

Tensile Strength 87 600

Elongation % in 2" 27%

Stress Relieved 1 hr. @ 1150oF (620oC)ksi MPa

Yield Strength 75 518

Tensile Strength 88 607

Elongation % in 2" 29%

Stress Relieved 8 hr. @ 1150oF (620oC)ksi MPa

Yield Strength 76 524

Tensile Strength 88 607

Elongation % in 2" 28%

Stress Relieved 20 hr. @ 1150oF (620oC)ksi MPa

Yield Strength 73 504

Tensile Strength 85 587

Elongation % in 2" 29%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

-20ºF (-30ºC) Stress Relieved 8 hr. @ 1150oF (620oC) 69 94

30ºF (0ºC) Stress Relieved 8 hr. @ 1150oF (620oC) 108 146

10ºF (-10ºC) Stress Relieved 13 hr. @ 1150oF (620oC) 135 183

60ºF (15ºC) Stress Relieved 20 hr. @ 1150oF (620oC) 150 203

Typical undiluted Weld Metal AnalysisC Mn Si P S Mo

0.04% 0.8% 0.4% 0.012% 0.01% 0.55%

Storage and reconditioningStore open electrodes at 225oF (107oC) to 300oF (150oC)Recondition electrodes at 700oF (370oC) for 1 hour

ordering informationAA 7018-Mo 1/4X18X50#HS .....................................255021412AA 7018-Mo 1/8X14X50#HS .....................................255021818AA 7018-Mo 3/16X14X50#HS ....................................255023111AA 7018-Mo 3/32X14X50#HS ...................................255023319AA 7018-Mo 5/32X14X50#HS ...................................255025314AA 7018-Mo 7/32X18X50#HS ...................................255027310AA 7018-Mo 1/8X14X10#HS .....................................255021826AA 7018-Mo 3/16X14X10#HS ...................................255023129AA 7018-Mo 3/32X14X10#HS ...................................255023327AA 7018-Mo 5/32X14X10#HS ...................................255025322

Product Data Sheet ................................... SSP-1018

Page 5: Esab Chrome Moly electrode Brochure

4 5

DuAl ShiElD® 7000-A1

Dual Shield 7000-A1 is an all-position flux cored electrode recommended for 0.5% Mo steels. It is used in the fabrication and erection of boilers, pressure piping and tubing, and other pressure vessel applications. Shielding gas of 100% CO2 and 75% Ar, remainder CO2 may be used. A 75% Ar/25% CO2 shielding gas mixture is recommended to improve arc characteristics, increase wetting action, decrease penetration, and provide easier arc control for out-of-position welding. The weld metal analysis is similar to an E7018-A1 low hydrogen electrode.

Classification and ApprovalsAWS/ASME SFA 5.29: E81T1-A1C/A1M �

Shielding gas100% CO2 and Argon - CO2 mixtures up to 75% Argon

Complimentary ProductsGTAW (Spoolarc 83)SMAW (Atom Arc 7018-Mo)SAW (Spoolarc 40B)

Typical Mechanical PropertiesAs Welded, Co2

ksi MPa

Yield Strength 82 566

Tensile Strength 92 635

Elongation % in 2" 22% Stress Relieved 1 hr. @ 1150oF (620oC), CO2

ksi MPa

Yield Strength 82 566

Tensile Strength 93 645

Elongation % in 2" 26%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

72ºF (22ºC) As Welded, CO2 43 58

0ºF (-18ºC) As Welded, CO2 20 27

Typical undiluted Weld Metal Analysis, Co2

C Mn Si P S Mo0.05% 0.09% 0.6% 0.01% 0.008% 0.55%

Storage and reconditioning*Store open electrodes at 300oF (150oC)Recondition electrodes at 300oF (150oC) for 6 to 8 hours

*Note: If packaged on a plastic spool, remove spool from plastic bag before placing in oven. Store at 125ºF (52ºC).

ordering informationDS 7000-A1 045X33#AWS ........................................245012521

SPoolArC® 40B

Spoolarc 40B is a single or multipass welding wire for carbon and low alloy steels. Product produces good as welded and stress relieved impact toughness. Weld metal tensile strength is in excess of 70 ksi (483 MPa). Applications include pressure vessel fabrication and other similar welds which require postweld heat treatment.

Classification and ApprovalsAWS/ASME SFA 5.23: EA2 �

Complimentary ProductsGTAW (Spoolarc 83)SMAW (Atom Arc 7018-Mo)FCAW (Dual Shield 7000-A1)

Typical Mechanical Properties w/ ESAB OK Flux 10.62 Stress relieved 1hr. @ 1150°F (620°C)

ksi MPa

Yield Strength 80 552

Tensile Strength 91 628

Elongation % in 2" 28%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

-50ºF (-46ºC) Stress relieved 1hr. @ 1150°F (620°C) 40 54

Typical Wire ChemistryC Mn Si S P Mo

0.13% 1.2% .03% .019% .009% .54%

Typical undiluted Weld Metal Analysis OK Flux 10.62

C Mn Si P S Mo0.10% 1.1% 0.2% 0.017% 0.010% 0.50%

ordering information40B 3/32x65#CL ............................................................ 1184F3040B 1/8x150#CL ............................................................ 1185F1240B 1/8x65#CL .............................................................. 1184F3240B 1/8x800#DR ............................................................ 1186F1240B 5/32x150#CL .......................................................... 1185F1440B 5/32x65#CL ............................................................ 1184F3440B 5/32x800#DR .......................................................... 1186F1440B 3/16x65#CL ............................................................ 1184F3540B 3/16x800#DR .......................................................... 1186F1540B 1/4x800#DR ...........................................................118EFLW

Product Data Sheet ...................................COR-1072Product Data Sheet ...................................COR-1061

Page 6: Esab Chrome Moly electrode Brochure

6 7

AToM ArC® 8018-CM

Atom Arc 8018-CM electrodes contain 1.25% Cr and Mo as alloy addition. They are used for the welding of such steels as 0.5% Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr - 0.5% Mo, which are used principally in power piping and boiler work for the fabrication of plates, pipes, tubes, castings, and forgings.

Classification and ApprovalsMILITARY-MIL-E-22200/8: MIL-8018-B2 �A.B.S.- AWS A5.5: E8018-B2 �AWS/ASME SFA 5.5: E8018-B2H4R �

ApplicationThis electrode is designed to meet the most stringent standards for welding 1.25% Cr - 0.5% Mo steels while producing an X-Factor <15 MAX.

Preheat informationPreheat should be used on hardenable steels to prevent the formation of a hard heat-affected zone. Preheat may also be required in welding heavy sections.

Electrode imprint Marking8018-B2H4R

Complimentary ProductsGTAW (Tigrod ER80S-B2)FCAW (Dual Shield 8000-B2)SAW (Spoolarc U515 w/ OK Flux 10.62)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 84 580

Tensile Strength 97 669

Elongation % in 2" 25%

Stress Relieved 1 hr. @ 1300oF (704oC) ksi MPa

Yield Strength 90 621

Tensile Strength 93 642

Elongation % in 2" 25%

Stress Relieved 8 hr. @ 1150oF (620oC)

ksi MPa

Yield Strength 88 607

Tensile Strength 102 704

Elongation % in 2" 24%

Stress Relieved 8 hr. @ 1275oF (690oC) ksi MPa

Yield Strength 82 566

Tensile Strength 96 662

Elongation % in 2" 26%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

30ºF (0ºC) Stress Relieved 8 hr. @ 1125oF (607oC) 80 108

30ºF (0ºC) Stress Relieved 8 hr. @ 1150oF (620oC) 83 113

30ºF (0ºC) Stress Relieved 8 hr. @ 1250oF (677oC) 98 133

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.06% 0.8% 0.5% 0.011% 0.008% 1.3% 0.57% <15

Storage and reconditioningStore open electrodes at 225oF (107oC) to 300oF (150oC)Recondition electrodes at 700oF (370oC) for 1 hour

ordering informationAA 8018-CM 1/8X14X50#HS ....................................255051815AA 8018-CM 3/16X14X50#HS .................................. 255053118AA 8018-CM 3/32X14X50#HS ..................................255053316AA 8018-CM 5/32X14X50#HS .................................. 255055311AA 8018-CM 7/32X18X50#HS ..................................255057317AA 8018-CM 1/8X14X10#HS ....................................255051823AA 8018-CM 3/32X14X10#HS ..................................255053324

DuAl ShiElD® 8000-B2

Dual Shield 8000-B2 is an all-position flux cored electrode which contains 1.25% Cr - 0.5% Mo. The weld metal analysis is similar to an E8018-B2 low hydrogen electrode. Dual Shield 8000-B2 wire is used for the welding of such steel as 0.5% Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr - 0.5% Mo. This wire is designed for single or multiple pass welding. Shielding gases of 100% CO2 and 75% Ar - remainder CO2 may be used.

Classification and ApprovalsAWS/ASME SFA 5.29: E81T1-B2C/B2M �

Shielding gas100% CO2 and Argon - CO2 mixtures up to 75% Argon

Complimentary ProductsGTAW (Tigrod ER80S-B2)SMAW (Atom Arc 8018-CM)SAW (Spoolarc U515 w/ OK Flux 10.62)

Typical Mechanical Properties As welded

ksi MPa

Yield Strength 97 669

Tensile Strength 109 752

Elongation % in 2" 17%

Stress Relieved 8hr. @ 1275°F (690°C)

ksi MPa

Yield Strength 83 573

Tensile Strength 95 655

Elongation % in 2" 22%

Typical undiluted Weld Metal Analysis, Co2

C Mn Si P S Cr Mo X-Factor0.06% 0.7% 0.6% 0.009% 0.008% 1.3% 0.5% <15

Storage and reconditioning*Store open electrodes at 300oF (150oC)Recondition electrodes at 300oF (150oC) for 6 to 8 hours.

*Note: If packaged on a plastic spool, remove spool from plastic bag before placing in oven. Store at 125oF (52oC).

ordering informationDS 8000-B2 035X33#AWS ........................................245005590DS 8000-B2 045X33#AWS ........................................245005533DS 8000-B2 045X60#CL ...........................................245005582DS 8000-B2 1/16X33#AWS .......................................245020532DS 8000-B2 1/16X60#CL ..........................................245005517

Product Data Sheet ................................... SSP-1019 Product Data Sheet ...................................COR-1062

Page 7: Esab Chrome Moly electrode Brochure

8 9

TigroD® ER80S-B2

TIGROD ER80S-B2 is a chrome-moly Tigrod used for joining creep resistant steels of the 0.5% Cr - 0.5% Mo, 1% Cr - 0.5% Mo, and 1.25% Cr - 0.5% Mo grades. These copper-coated rods are primarily used to fabricate and repair power piping and boilers in the power generation industry.

TIGROD ER80S-B2 is embossed on both ends with the alloy identification.

Classification and ApprovalsAWS/SFA 5.28: ER80S-B2 �

Shielding gas100% Argon

Complimentary ProductsSMAW (Atom Arc 8018-CM)FCAW (Dual Shield 8000-B2)SAW (Spoolarc U515 w/ OK Flux 10.62)

Typical Mechanical Properties Stress Relieved 1hr. @ 1150°F (620°C)

ksi MPa

Yield Strength 81 559

Tensile Strength 95 655

Elongation % in 2" 29%

Stress Relieved 1hr. @ 1350°F (732°C)ksi MPa

Yield Strength 82 566

Tensile Strength 95 655

Elongation % in 2" 24% Stress Relieved 1hr. @ 1375°F (746°C)

ksi MPa

Yield Strength 80 552

Tensile Strength 93 642

Elongation % in 2" 26%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.08% 0.5% 0.4% 0.007% 0.01% 5.8% 0.5% <15

Storage and reconditioningStore open electrodes in a dry place

ordering informationTIG80SB2 1/16X36X10#T/30#CT E2............................ 250JF48TIG80SB2 3/32X36X10#T/30#CT E2............................ 250JF50TIG80SB2 1/8X36X10#T/30#CT E2.............................. 250JF52TIG80SB2 5/32X36X10#T/30#CT E2............................ 250JF54

SPoolArC® u515

Spoolarc U515 is a submerged arc wire that is used for welding Cr-Mo steels up to 1.25% Cr and .5% Mo. Typical applications include process piping, heat exchangers, and pressure vessel fabrication.

Classification and ApprovalsAWS/ASME SFA 5.23: EB2R �

fluxesOK Flux 10.62 is a high basicity flux with excellent mechanical properties.OK Flux 10.63 is a low residual, highly basic flux for welding creep resistant steels.

Complimentary ProductsGTAW (Tigrod ER80S-B2)SMAW (Atom Arc 8018-CM)FCAW (Dual Shield 8000-B2)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)with OK Flux 10.62

ksi MPa

Yield Strength 76 520

Tensile Strength 88 610

Elongation % in 2" 26%

Stress Relieved 8 hr. @ 1275oF (690oC)with OK Flux 10.62

ksi MPa

Yield Strength 75 515

Tensile Strength 87 600

Elongation % in 2" 27%

Typical Charpy V-notch impact PropertiesOK Flux 10.62Testing Temperature Condition Ft.-lbs J

-20ºF (-29ºC) Stress Relieved 1 hr. @ 1275oF (690oC) 120 163

OK Flux 10.63Testing Temperature Condition Ft.-lbs J

-20ºF (-29ºC) Stress Relieved 1 hr. @ 1275oF (690oC) 180 294

Typical Wire ChemistryC Mn Si P S Cr Mo

0.1% 0.7% 0.2% 0.01% 0.01% 1.5% 0.5%

Typical undiluted Weld Metal Analysis OK Flux 10.62

C Mn Si P S Cr Mo Cu0.05% 0.71% 0.19% 0.011% 0.007% 1.6% 0.52% 0.52%

OK Flux 10.63C Mn Si P S Cr Mo Cu X-Factor

0.05% 0.70% 0.19% 0.011% 0.004% 1.6% 0.52% 0.52% <15

Storage and reconditioningStore unopened bags at 68oF +/- 18oF (20oC +/- 10oC)Recondition electrodes at 570oF +/- 45oF (300oC +/- 25oC) for 2- 4 hrs

ordering informationU515 CU 3/32X65#CL ...................................................2184F30U515 CU 1/8X65#CL .....................................................2184F32U515 CU 5/32X65#CL ...................................................2184F34U515 CU 3/16X65#CL ...................................................2184F35U515 CU 3/32X800#DR ................................................2186F10U515 CU 1/8X800#DR ..................................................2186F12U515 CU 5/32X800#DR ................................................2186F14U515 CU 1/8 700#DR ....................................................2186F52U515 CU 1/4X600#DR ................................................. 218EFLSU515 CU 1/8X800#DR ..................................................2186F12U515 CU 1/16X900#OMP 2/PLT .................................. 218UF48OK FLUX 10.62 55# BAG ........................................106200000AOK FLUX 10.63 55# BAG ........................................106300000A

Product Data Sheet ...................................COR-1066 Product Data Sheet ...................................COR-1073

Page 8: Esab Chrome Moly electrode Brochure

10 11

AToM ArC® 9018-CM

Atom Arc 9018-CM is an all-position low hydrogen electrode designed for welding 2.5% Cr - 1% Mo steels commonly used in pressure vessels, heat exchangers and related components.

Classification and ApprovalsMILITARY-MIL-E-0022200/8: MIL-9018-B3 �A.B.S.- AWS A5.5: E9018-B3 �AWS/ASME SFA 5.5: E9018-B3H4R �

ApplicationThis electrode is designed to meet the most stringent standards for welding 1.25% Cr - 0.5% Mo steels while producing an X-Factor <15 MAX.

Complimentary ProductsGTAW (Tigrod ER90S-B3)FCAW (Dual Shield 9000-B3)SAW (Autrod 13.20SC w/ OK Flux 10.62 or OK Flux 10.63)

Electrode imprint Marking9018-B3H4R

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 85 587

Tensile Strength 102 704

Elongation % in 2" 23%

Stress Relieved 8 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 82 566

Tensile Strength 97 669

Elongation % in 2" 26%

Stress Relieved 20 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 85 587

Tensile Strength 100 690

Elongation % in 2" 22%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.07% 0.7% 0.4% 0.011% 0.008% 2.2% 1.1% <15

Storage and reconditioningStore open electrodes at 225oF (105oC)Recondition electrodes at 700oF (370oC) for 1 hour

ordering informationAA 9018-CM 1/8X14X50#HS ....................................255071813AA 9018-CM 3/16X14X50#HS .................................. 255073116AA 9018-CM 3/32X14X50#HS ..................................255073314AA 9018-CM 5/32X14X50#HS ..................................255075319AA 9018-CM 7/32X18X50#HS ..................................255077315AA 9018-CM 1/8X14X10#HS ....................................255071821AA 9018-CM 3/32X14X10#HS ..................................255073322AA 9018-CM 5/32X14X10#HS ..................................255075327

DuAl ShiElD® 9000-B3

Dual Shield 9000-B3 is an all-position flux cored electrode which deposits a 2.25% Cr - 1% Mo weld metal. The weld metal analysis is similar to an E9018-B3 low hydrogen electrode. Dual Shield 9000-B3 is recommended for welding 2.25% Cr - 1% Mo steels. This wire is designed for single or multiple pass welding. Shielding gas of 100% CO2 and 75% Ar - remainder CO2 may be used.

Classification and ApprovalsAWS/ASME SFA 5.29: E91T1-B3C/B3M �

Complimentary ProductsSMAW (Atom Arc 9018-CM)GTAW (Tigrod ER90S-B3)SAW (Autrod 13.20SC w/ OK Flux 10.62 or 10.63)

Shielding gas100% CO2 or Argon - CO2 mixtures up to 75% Argon

Typical Mechanical Properties Stress Relieved 3 hr. @ 1275oF (690oC)

Shielding Gas: CO2 ksi MPa

Yield Strength 84 580

Tensile Strength 97 669

Elongation % in 2" 22%

Typical undiluted Weld Metal Analysis, Co2

C Mn Si P S Cr Mo X-Factor0.06% 0.6% 0.6% 0.01% 0.008% 2.2% 1% <15

Storage and reconditioning*Store open electrodes at 300oF (150oC)Recondition electrodes at 300oF (150oC) for 6-8 hours

*Note: If packaged on a plastic spool, remove spool from plastic bag before placing in oven. Store at 125oF (52oC).

ordering informationDS 9000-B3 045X33#PSP VP ...................................245006424DS 9000-B3 045X33#AWS ........................................245006523DS 9000-B3 1/16X33#AWS .......................................245006416DS 9000-B3 1/16X60#CL ..........................................245006515

Product Data Sheet ................................... SSP-1022 Product Data Sheet ...................................COR-1063

Page 9: Esab Chrome Moly electrode Brochure

12 13

TigroD® ER90S-B3

TIGROD ER90S-B3 is a chrome-moly Tigrod used for joining 2.5% Cr - 1% Mo creep resistant steels. These copper-coated rods are primarily used to fabricate and repair power piping, pressure vessels, heat exchangers and boilers in the power generation industry.

TIGROD ER90S-B3 is embossed on both ends with alloy identification.

Classification and ApprovalsAWS/SFA 5.28: ER90S-B3 �

Shielding gas100% Argon

Complimentary ProductsSMAW (Atom Arc 9018-CM)FCAW (Dual Shield 9000-B3)SAW (Autrod 13.20SC w/ OK Flux 10.62 or 10.63)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 79 545

Tensile Strength 94 649

Elongation % in 2" 27%

Stress Relieved 1 hr. @ 1300oF (704oC)

ksi MPa

Yield Strength 76 524

Tensile Strength 93 642

Elongation % in 2" 25%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.08% 0.6% 0.5% 0.009% 0.009% 2.4% 0.9% <15

Storage and reconditioningStore open electrodes in a dry place.

ordering informationTIG90SB3 1/16X36X10#T/30#CT E2............................ 251JF48TIG90SB3 3/32X36X10#T/30#CT E2............................ 251JF50TIG90SB3 1/8X36X10#T/30#CT E2.............................. 251JF52TIG90SB3 5/32X36X10#T/30#CT E2............................ 251JF54

ok AuTroD® 13.20SC

ESAB’s OK Autrod 13.20SC is a copper-coated low alloy submerged arc wire designed for the welding of creep resistant steel of the 2.5% Cr - 1% Mo type. When combined with OK Flux 10.63, OK Autrod 13.20SC produces a metalurgically clean weld which is capable of meeting X-factor of less than 15.This combination fulfills the stringent requirements for toughness after step cooling treatment of the weld metal. OK Autrod 13.20SC can also be combined with OK Flux 10.62 for applications not requiring step cooling treatment. OK Autrod 13.20SC is used for welding process piping, heat exchangers, and pressure vessel fabrication.

Classification and ApprovalsAWS/ASME SFA 5.23: EB3R �

fluxesOK Flux 10.62 is a high basicity flux with excellent mechanical properties.OK Flux 10.63 is a highly basic, low residual flux for welding creep resistant steels.

Complimentary ProductsSMAW (Atom Arc 9018-CM)FCAW (Dual Shield 9000-B3)GTAW (Tigrod ER90S-B3)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)with OK Flux 10.62

ksi MPa

Yield Strength 77 531

Tensile Strength 91 628

Elongation % in 2" 25%

Stress Relieved 1 hr. @ 1275oF (690oC)with OK Flux 10.63

ksi MPa

Yield Strength 76 524

Tensile Strength 90 621

Elongation % in 2" 25%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

-20ºF (-29ºC)With OK Flux 10.62

Stress Relieved 1 hr. @ 1275oF (690oC)

59 80

-80ºF (-62ºC)With OK Flux 10.63

Stress Relieved 1 hr. @ 1275oF (690oC)

37 50

Typical Wire ChemistryC Mn Si P S Cr Mo

0.12% 0.63% 0.16% 0.006% 0.004% 2.3% 1%

Typical undiluted Weld Metal AnalysisOK Flux 10.62

C Mn Si P S Cr Mo

0.08% 0.6% 0.2% 0.025%max

0.015%max 2.0% 0.85%

OK Flux 10.63

C Mn Si P S Cr Mo X-Factor

0.07% 0.6% 0.2% 0.010%max

0.010%max 2.1% 1% <15

Storage and reconditioning (Flux ONLY)Store un-opened bag at 68oF +/- 18oF (20oC +/- 10oC), relative humidity as low as possible, not exceeding 60%. Redry flux at 570oF +/- 45oF (300oC +/- 25oC) for 2 - 4 hours.

ordering informationOK AUTROD 13.20SC 3/32X65#CL .............................2554F30OK AUTROD 13.20SC 1/8X65#CL ...............................2554F32OK AUTROD 13.20SC 5/32X65#CL .............................2554F34OK FLUX 10.62 55# BAG ........................................106200000AOK FLUX 10.63 55# BAG ........................................106300000A

Product Data Sheet ...................................COR-1070 Product Data Sheet ...................................COR-1074

Page 10: Esab Chrome Moly electrode Brochure

14 15

AToM ArC® 8018-B6

Atom Arc 8018-B6 is designed to weld 5% Cr - 0.5% Mo creep resistant steels such as ASTM A387 Grade 5, A213-T5 and A335-P5. These steels are normally used in pressure vessels and piping for high temperature service.

Classification and ApprovalsAWS/ASME SFA 5.5: E8018-B6H4R �

ApplicationThis electrode is designed to meet the most stringent standards for welding 5% Cr - 0.5% Mo steels while producing an X-Factor <15 MAX.

Preheat informationThe recommended preheat temperature for 5CrMo steels is 400-500ºF depending on thickness. Post weld heat treatment is generally required.

Complimentary ProductsGTAW (Tigrod ER80S-B6)FCAW (Dual Shield B6)

Electrode imprint Marking8018-B6H4R

Typical Mechanical Properties Stress Relieved 1 hr. @ 1375oF (746oC)

ksi MPa

Yield Strength 86 593

Tensile Strength 101 695

Elongation % in 2" 23%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.07% 0.7% 0.5% 0.013% 0.009% 5.3% 0.6% <15

Storage and reconditioningStore open electrodes at 225oF (105oC)Recondition electrodes at 700oF (370oC) for 1 hour

ordering informationAA 8018-B6 3/32X14X10#HS ....................................255197808AA 8018-B6 1/8X14X10#HS ......................................255197816AA 8018-B6 5/32X14X10#HS ....................................255197824AA 8018-B6 3/16X14X10#HS ....................................255197832

DuAl ShiElD® B6

Dual Shield B6 is an all-position flux cored electrode designed for use with 75% Ar / 25% CO2 or 100% CO2 shielding gas. Dual Shield B6 is intended for use on pipe and plate steels having a nominal 5% Chromium - 0.5% Molybdenum composition. These steels are typically used in process piping in the oil, gas, petrochemical, and marine industries.

Classification and ApprovalsAWS/ASME SFA 5.29: E81T1-B6C/B6M �

Shielding gas100% CO2 or Argon - CO2 mixtures up to 75% Argon

Complimentary ProductsSMAW (Atom Arc 8018-B6)GTAW (Tigrod ER80S-B6)

Typical Mechanical Properties Stress Relieved 2 hr. @ 1375oF (746oC)Shielded Gas: 75% Ar / 25% CO2 ksi MPa

Yield Strength 84 580

Tensile Strength 98 676

Elongation % in 2" 20%

Stress Relieved 2 hr. @ 1375oF (746oC)Shielded Gas: CO2 ksi MPa

Yield Strength 84 580

Tensile Strength 98 676

Elongation % in 2" 20%

Typical undiluted Weld Metal Analysis75%Ar - 25%CO2

C Mn Si P S Cr Mo X-Factor0.05% 0.5% 0.5% 0.006% 0.007% 5.4% 0.5% <15

Co2

C Mn Si P S Cr Mo X-Factor0.08% 0.6% 0.7% 0.01% 0.006% 4.7% 0.5% <15

Storage and reconditioning*Store open electrodes at 300oF (150oC)Recondition electrodes at 300oF (150oC) for 6 to 8 hours

*Note: If packaged on a plastic spool, remove spool from plastic bag before placing in oven. Store at 125oF (52oC).

ordering information**DS B6 045X33#PSP VP ............................................258079045

** Note: 8"-15" spools are available as a special order item.

Product Data Sheet ................................... SSP-1020 Product Data Sheet ...................................COR-1064

Page 11: Esab Chrome Moly electrode Brochure

16 17

TigroD® ER80S-B6

TIGROD ER80S-B6 is a Chrome-Moly Tigrod for joining 5% Cr - 0.5% Mo steels such as ASTM A200-T5, A335-P5 and A387-Gr5. These copper coated rods are primarily used to fabricate and repair power piping, pressure vessels, heat exchangers and boilers used in the power generation industry.

TIGROD ER80S-B6 is embossed on both ends with the alloy identification.

Classification and ApprovalsAWS A5.28: ER80S-B6 �

Shielding gas100% Argon

Complimentary ProductsSMAW (Atom Arc 8018-B6)FCAW (Dual Shield B6)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1350oF (732oC)

ksi MPa

Yield Strength 82 566

Tensile Strength 95 656

Elongation % in 2" 24%

Stress Relieved 1 hr. @ 1375oF (746oC) Shielded Gas: 100% Ar ksi MPa

Yield Strength 80 552

Tensile Strength 93 642

Elongation % in 2" 26%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.08% 0.5% 0.4% 0.007% 0.01% 5.8% 0.5% <15

Storage and reconditioningStore open electrodes in a dry place.

ordering informationTIG80SB6 1/16X36X10#T/30#CT E2............................ 252JF48TIG80SB6 3/32X36X10#T/30#CT E2............................ 252JF50TIG80SB6 1/8X36X10#T/30#CT E2.............................. 252JF52TIG80SB6 5/32X36X10#T/30#CT E2............................ 252JF54

AToM ArC® 8018-B8

Atom Arc 8018-B8 is designed to weld 9% Cr - 1% Mo creep resistant steels such as ASTM A213-T9 and A335-P9. These steels are used in pressure vessels and piping for high temperature service.

Classification and ApprovalsAWS/ASME SFA 5.5: E8018-B8H4R �

ApplicationThis electrode is designed to meet the most stringent standards for welding 9% Cr - 1% Mo steels while producing an X-Factor <15 MAX.

Preheat informationPreheat should be used on hardenable steels to prevent the formation of a hard heat-affected zone. Preheat may also be required in welding heavy sections.

Complimentary ProductsGTAW (Tigrod ER80S-B8) FCAW (Dual Shield B8)

Electrode imprint Marking8018-B8H4R

Typical Mechanical Properties Stress Relieved 1 hr. @ 1375oF (746oC)

ksi MPa

Yield Strength 79 545

Tensile Strength 98 676

Elongation % in 2" 22%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.07% 0.8% 0.3% 0.01% 0.01% 8.6% 1% <15

Storage and reconditioningStore open electrodes at 225oF (105oC)Recondition electrodes at 700oF (370oC) for 1 hour

ordering informationAA 8018-B8 3/32X14X10#HS ....................................255187908AA 8018-B8 1/8X14X10#HS ......................................255187916AA 8018-B8 5/32X14X10#HS ....................................255187924AA 8018-B8 3/16x14x10#HS .....................................258181932

Product Data Sheet ...................................COR-1065 Product Data Sheet ................................... SSP-1021

Page 12: Esab Chrome Moly electrode Brochure

18 19

TigroD® Er80S-B8

TIGROD ER80S-B8 is a solid wire for TIG welding requiring creep strength. This 9% Cr - 1% Mo Tigrod is used to weld 9% chromium - 1% Molybdenum steels (ASTM Section IX, P No 5B, Group 1) such as ASTM A335 Grade P9 or ASTM A213 Grade T9.

TIGROD ER80S-B8 is embossed on both ends with the alloy identification.

Classification and ApprovalsAWS A5.28: ER80S-B8 �

Shielding gas100% Argon

Complimentary ProductsSMAW (Atom Arc 8018-B8)FCAW (Dual Shield B8)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1375oF (746oC) Shielded Gas: 100% Ar ksi MPa

Yield Strength 78 538

Tensile Strength 97 670

Elongation % in 2" 24%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.07% 0.50% 0.40% 0.005% 0.003% 9% 1% <15

Storage and reconditioningStore open electrodes in a dry place.

ordering informationTIG80SB8 1/16X36X10#T/30#CT E2........................259971281TIG80SB8 3/32X36X10#T/30#CT E2........................259971299TIG80SB8 1/8X36X10#T/30#CT E2..........................259971307TIG80SB8 5/32X36X10#T/30#CT E2........................259971315

AToM ArC® 9015-B9

Atom Arc 9015-B9 is designed to weld the modified 9% Cr - 1% Mo steels known by the designations T91, P91 or Grade 91. These steels are designed to provide improved creep strength, toughness fatigue and oxidation, and corrosion resistance at elevated temperatures.

This product is specially formulated with a combined Mn + Ni < 1.20% to meet numerous customers’ specifications while producing an X-Factor <15.

Classification and ApprovalsAWS/ASME SFA 5.5: E9015-B9H4R �

ApplicationThis electrode is used to weld high temperature steam pipe, heat exchangers and boiler units.

Preheat informationThe recommended preheat temperature for 9CrMo steels is 400-500°F depending on thickness. Post weld heat treatment is generally required.

Complimentary ProductsGTAW (Tigrod ER90S-B9)FCAW (Dual Shield B9)

Electrode imprint Marking9015-B9H4R

Typical Mechanical Properties Stress Relieved 1 hr. @ 1350oF (732oC)

ksi MPa

Yield Strength 95 655

Tensile Strength 114 787

Elongation % in 2" 20%

Stress Relieved 1 hr. @ 1375oF (746oC)

ksi MPa

Yield Strength 102 704

Tensile Strength 119 821

Elongation % in 2" 19%

Stress Relieved 2 hr. @ 1400°F (760°C)

ksi MPa

Yield Strength 86 593

Tensile Strength 106 731

Elongation % in 2" 23%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.1% 0.85% 0.19% 0.009% 0.009% 8.6% 1% <15

Storage and reconditioningStore open electrodes at 225oF (105oC) to 300oF (150oC)Recondition electrodes at 700oF (371oC) for 1 hour

ordering informationAA 9015-B9 3/32X14X10#HS ....................................255061335AA 9015-B9 1/8X14X10#HS ......................................255061343AA 9015-B9 5/32X14X10#HS ....................................255061350AA 9015-B9 3/16X14X10#HS ....................................255061368

Product Data Sheet ...................................COR-1069 Product Data Sheet ................................... SSP-1017

Page 13: Esab Chrome Moly electrode Brochure

20 21

AToM ArC® 9015-B9hiSToriCAl DATA

Actual Chemical Analysis*

Chemical Analysis Min Median Max

C 0.080 0.099 0.124

Mn 0.59 0.85 0.99

Si 0.12 0.19 0.30

P 0.004 0.009 0.011

S 0.007 0.009 0.010

Cr 8.04 8.60 9.60

Ni 0.15 0.25 0.45

Mo 0.90 0.99 1.11

Nb 0.02 0.04 0.09

Al <0.001 0.001 0.002

Co 0.002 0.008 0.010

Cu 0.01 0.05 0.12

V 0.16 0.21 0.29

N 0.032 0.040 0.052

As <0.0002 0.0010 0.0030

Sb <0.0004 0.0010 0.0021

Sn 0.0002 0.002 0.0093

Fe Rem Rem Rem

* This data is compiled from 21 different lots within the time period of January 2007 to May 2008.

Actual Mechanical Analysis**

Mechanical Analysis

Min Median Max

1400oF (760oC)@ 2 hrs.

1375oF (765oC)@ 1 hr.

1400oF (760oC)@ 2 hrs.

1375oF (765oC)@ 1 hr.

1400oF (760oC)@ 2 hrs.

1375oF (765oC)@ 1 hr.

Yield (ksi) 83.5 88.4 86.5 96.6 89.3 121.9

Tensile (ksi) 105.2 107.4 107.5 115.1 109.1 137.9

% Elongation 22 17 22 21 24 23

X-Factor 11 8 12 12 14 14

Diffusible H2 (ml/100gr) 1.2 0.6 2.1 1.75 3.2 3.2

Charpy V-notch @ 68°F (Ft.-lbs) 49.8 n/a 58.4 n/a 67 n/a

** The data above was derived in the PWHT condition through March 2008 at 1 hour at 1375°F +/- 25°F. As of April 2008, the specification has changed to 1400°F +/- 25°F at 2 hours. This data is compiled from 21 different tests within the time period of January 2007 to May 2008.

AToM ArC® 9018-B9

Atom Arc 9018-B9 is designed to weld the modified 9% Cr - 1% Mo steels known by the designations T91, P91 or Grade 91. These steels are designed to provide improved creep strength, toughness, fatigue and oxidation, and corrosion resistance at elevated temperatures.

This electrode is specially formulated with a combined Mn + Ni < 1.20% max. and meets numerous customers’ specifications while producing an X-Factor <15 MAX.

Classification and ApprovalsAWS/ASME SFA 5.5: E9018-B9H4R �

ApplicationThis electrode is used to weld high temperature pipe, heat exchangers and boiler units.

Preheat informationThe recommended preheat temperature for 9CrMo steels is 400-500°F depending on thickness. Post weld heat treatment is generally required.

Complimentary ProductsGTAW (Tigrod ER90S-B9)FCAW (Dual Shield B9)

Electrode imprint Marking9018-B9H4R

Typical Mechanical Properties Stress Relieved 1 hr. @ 1375oF (746oC)

ksi MPa

Yield Strength 103 711

Tensile Strength 119 821

Elongation % in 2" 19%

Stress Relieved 2 hr. @ 1400oF (760oC)

ksi MPa

Yield Strength 85 587

Tensile Strength 105 724

Elongation % in 2" 25%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.1% 0.8% 0.17% 0.008% 0.009% 8.5% 1% <15

Storage and reconditioningStore open electrodes @ 225°F (107°C) to 300°F (150°C)Recondition electrodes @ 700°F (370°C) for 1 hour

ordering informationAA 9018-B9 3/32x14x10# HS .................................... 255067845 AA 9018-B9 1/8x14x10# HS ...................................... 255067852AA 9018-B9 5/32x14x10# HS .................................... 255067860AA 9018-B9 3/16x14x10# HS .................................... 255067878

Product Data Sheet ................................... SSP-1017 Product Data Sheet ................................... SSP-1023

Page 14: Esab Chrome Moly electrode Brochure

22 23

AToM ArC® 9018-B9hiSToriCAl DATA

Actual Chemical Analysis*Chemical Analysis Min Median Max

C 0.080 0.098 0.124

Mn 0.69 0.84 1.11

Si 0.12 0.17 0.25

P 0.004 0.008 0.013

S 0.007 0.009 0.014

Cr 8.04 8.55 9.51

Ni 0.19 0.27 0.51

Mo 0.85 1.00 1.18

Nb 0.02 0.04 0.10

Al 0.001 0.003 0.010

Co <0.001 0.007 0.020

Cu 0.010 0.04 0.14

V 0.16 0.19 0.22

N 0.032 0.039 0.051

As <0.0002 <0.0002 0.0028

Sb <0.0004 0.0010 0.0017

Sn 0.0002 0.0020 0.0077

Fe Rem Rem Rem

* This data is compiled from 8 different lots within the time period of March 2007 to February 2008.

Actual Mechanical Analysis**

Mechanical Analysis

Min Median Max

1400oF (760oC) @ 2 hrs.

Yield (ksi) 93 96 124

Tensile (ksi) 112 115 141

% Elongation 18 20 23

X-Factor 8 12 14

Diffusible H2 (ml/100gr) 0.3 1.7 1.9

Charpy V-notch (Ft.-lbs) 39 60 80

** The data above was derived in the PWHT condition at 1 hour at 1375°F +/- 25°F. This data is compiled from 8 different tests within the time period of March 2007 to February 2008.

DuAl ShiElD® B9

Dual Shield B9 is an all-position flux cored electrode designed for the welding of modified 9% chromium creep resistant steels, such as ASTM A335 Grade P91 or ASTM A213 T91. This product is specially formulated with a combined Mn + Ni < 1.20% to meet a variety of customer specifications. Dual Shield B9 product is packaged on wire spool basket to allow for the product to be placed in a heated storage oven. In addition, the wire is packaged in a vacuum-sealed foil bag to prevent moisture pick up until the sealed bag has been opened.

Classification and ApprovalsAWS/ASME A5.29: E91T1-B9M-H8 �

ApplicationDual Shield B9 has been formulated for use with 75% Argon/ 25% CO2 shielding gas. This product operates well out-of-position, especially in the 6 o’clock position on pipe producing a flat to slightly convex weld bead.

Shielding gas75% Ar/25% CO2

Complimentary ProductsSMAW (Atom Arc 9015-B9 and/or 9018-B9) GTAW (Tigrod ER90S-B9)

Typical Mechanical Properties Stress Relieved 2 hr. @ 1400oF (760oC)Shielded Gas: 75% Ar / 25% CO2 ksi MPa

Yield Strength 87 600

Tensile Strength 107 738

Elongation % in 2" 21%

Typical Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

70ºF (20ºC) Stress Relieved 2 hr. @ 1400oF (760oC) 30 40

Typical undiluted Weld Metal Analysis, 75% Ar/25% CO2

C Mn Si P S Cr Mo X-Factor0.1% 0.96% 0.18% 0.009% 0.008% 8.9% 1% <15

Immediately from the vacuum-sealed bag the diffusible Hydrogen is 4ml/100 g weld metal.X-Factor: < 15Mn + Ni ration is < 1.20%

Storage and reconditioning*Store open electrodes at 300oF (150oC)Recondition electrodes at 300oF (150oC) for 1 hour

*Note: If packaged on a plastic spool, remove spool from plastic bag before placing in oven. Store at 125oF (52oC).

ordering informationDS B9 045x15#PSP VP ..............................................242250041 DS B9 045x33#BAWS VP ..........................................242250033DS B9 1/16x33#BAWS VP ........................................242250017

Product Data Sheet ................................... SSP-1023 Product Data Sheet ...................................COR-1060

Page 15: Esab Chrome Moly electrode Brochure

24 25

DuAl ShiElD® B9

Actual Chemical Analysis historic Data*Chemical Analysis Min Median Max

C 0.090 0.095 0.110

Mn 0.80 0.96 1.15

Si 0.13 0.18 0.22

P 0.003 0.009 0.012

S 0.006 0.008 0.010

Cr 8.13 8.93 9.61

Ni 0.04 0.19 0.25

Mo 0.92 0.99 1.11

Nb 0.02 0.03 0.00

Al 0.001 0.002 0.003

Co <0.001 0.001 0.003

Cu 0.010 0.033 0.040

V 0.170 0.220 0.250

N 0.028 0.031 0.034

As <0.0002 0.0005 0.0005

Sb <0.0004 0.0005 0.0027

Sn 0.0018 0.0050 0.0081

Fe Rem Rem Rem

* This data is compiled from 8 different lots within the time period of February 2007 to May 2008.

Actual Mechanical Analysis historic Data**

Mechanical AnalysisMin Median Max

1400oF (760oC) @ 2 hrs.Yield (ksi) 82 88 90

Tensile (ksi) 104 107 109

% Elongation 20 22 22

X-Factor 5 9.5 10

Diffusible H2 (ml/100gr) 2.2 4.9 6.5

Charpy V-notch @ 70°F(Ft.-lbs) 22 29.6 34.6

** The data above was derived in the PWHT condition at 1400°F +/- 25°F at 2 hours. This data is compiled from 8 different tests within the time period of February 2007 to May 2008.

TigroD® ER90S-B9

TIGROD ER90S-B9 is a solid bare rod for TIG welding of modified 9% chromium-moly creep resistant steels, such as ASTM A335 Grade P91 or ASTM A213 T91.

TIGROD ER90S-B9 is embossed on both ends with the alloy identification. Classification and Approvals

AWS A5.28: ER90S-B9 �

Shielding gas100% Argon

Complimentary ProductsSMAW (Atom Arc 9018-B9 and/or 9015-B9) FCAW (Dual Shield B9)

Typical Mechanical Properties Stress Relieved 1 hr. @ 1275oF (690oC)

ksi MPa

Yield Strength 80 552

Tensile Strength 94 649

Elongation % in 2" 27%

Stress Relieved 1 hr. @ 1300oF (704oC)

ksi MPa

Yield Strength 76 524

Tensile Strength 93 642

Elongation % in 2" 25%

Typical undiluted Weld Metal AnalysisC Mn Si P S Cr Mo X-Factor

0.1% 0.6% 0.5% 0.01% 0.01% 2.4% 0.9% <15

Storage and reconditioningStore open electrodes in a dry place.

ordering informationTIGROD ER90SB9 1/16X36X10#T30# CT E2 ......... 259967289TIGROD ER90SB9 3/32X36X10#T30# CT E2 ......... 259967198TIGROD ER90SB9 1/8X36X10#T30# CT E2 ........... 259967206TIGROD ER90SB9 5/32X36X10#T30# CT E2 ......... 259967141

Product Data Sheet ...................................COR-1060 Product Data Sheet ...................................COR-1071

Page 16: Esab Chrome Moly electrode Brochure

26 27

ATOM ARC 9015-B9CErTifiED MATEriAl TEST rEPorT

Certificate of AnalysisCertified Materials Test Report

TradenameAtom Arc 9015-B9

ClassificationE9015-B9H4R

ClassAWS A5.5: 2006, ASME SFA 5.5, SEC. II, PART C, 2007 EDITION, 2008a ADDENDA

Diameter1/8"

length/Pkg Type14"

Heat/PKG Code No.090072

Lot No.4F924K01

radiographySatisfactory

Moisture by RC-412 Method

Out of the Can 0.08Exposed 0.19

Concentricity 2%

Diffusible Hydrogen to AWS A4.3GC

Average Valueml/100 gr 2.6

Actual Mechanical Properties Stress Relieved 2 hr. @ 1400oF (760oC)

ksi MPa

Yield Strength 81.5 562

Tensile Strength 103.1 711

Reduction in Area 60%

Elongation % in 2" 25%

Actual Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

70ºF (21ºC) Stress Relieved2 hr @ 1400oF (760oC) 77 104

Chemical AnalysisC Mn Si P S Cr Mo V Ni

0.09% 0.74% 0.19% 0.009% 0.008% 8.56% 0.96% 0.20% 0.21%

Cu Al N Nb As Sb Sn X-Factor0.04% <0.01% 0.039% 0.04% 0.0017% 0.0005% 0.0023% 10

These properties represent a single test performed on a given lot/heat of material. The properties may change on another lot/heat test.

AToM ArC® 9018-B9CErTifiED MATEriAl TEST rEPorT

Certificate of AnalysisCertified Materials Test Report

TradenameAtom Arc 9018-B9

ClassificationE9018-B9H4R

ClassAWS A5.5: 2006, ASME SFA 5.5, SEC. II, PART C, 2007 EDITION, 2008a ADDENDA

Diameter1/8"

Length/Pkg. Type14"

Heat/PKG Code No.10347

Lot No.2C926K03

radiographySatisfactory

Moisture by RC-412 Method

Out of the Can 0.06Exposed 0.17

Concentricity 2%

Diffusible Hydrogen to AWS A4.3GC

Average Valueml/100 gr 2.2

Actual Mechanical Properties Stress Relieved 2 hr. @ 1400oF (760oC)

ksi MPa

Yield Strength 84.8 586

Tensile Strength 105.7 730

Reduction in Area 62%

Elongation % in 2" 24%

Actual Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

70ºF (21ºC) Stress Relieved2 hr @ 1400oF (760oC) 52 71

2727

Chemical AnalysisC Mn Si P S Cr Mo V Ni

0.093% 0.80% 0.18% 0.012% 0.010% 9.51% 0.96% 0.21% 0.24%

Cu Al N Nb As Sb Sn X-Factor0.12% <0.01% 0.044% 0.03% 0.002% 0.001% 0.0047% 14

These properties represent a single test performed on a given lot/heat of material. The properties may change on another lot/ heat test.

Page 17: Esab Chrome Moly electrode Brochure

28 29

DuAl ShiElD® B9CErTifiED MATEriAl TEST rEPorT

Certificate of AnalysisCertified Materials Test Report

TradenameDual Shield B9

ClassificationE91T1-B9M

ClassAWS A5.29:2005

Diameter0.045"

Length/Pkg. Type33# Spool

Heat/PKG Code No.N/A

Lot No.87006

radiographySatisfactory

Diffusible Hydrogen to AWS A4.3GC

Average Valueml/100 gr 5.3

This material does meet “H8” Requirements.

Actual Mechanical Properties Stress Relieved 2 hr. @ 1400oF (760oC)

ksi MPa

Yield Strength 85.5 590

Tensile Strength 105.9 731

Reduction in Area 60%

Elongation % in 2" 22%

Actual Charpy V-notch impact PropertiesTesting Temperature Condition Ft.-lbs J

70ºF (21ºC) Stress Relieved2 hr @ 1400oF (760oC) 38 52

Chemical AnalysisC Mn Si P S Cr Mo V Ni

0.09% 0.83% 0.14% 0.010% 0.008% 9.14% 1.03% 0.22% 0.21%

Cu Al N Nb As Sb Sn X-Factor0.04% <0.01% 0.035% 0.03% 0.0005% 0.0005% 0.0037% 12

These properties represent a single test performed on a given lot/heat of material. The properties may change on another lot/ heat test.

TigroD® ER90S-B9CErTifiED MATEriAl TEST rEPorT

Certificate of AnalysisCertified Materials Test Report

TradenameTIGROD ER90S-B9

ClassificationER-90S-B9

ClassAWS A5.28-96, ASME SFA 5.28

Diameter1/8"

length14"

Heat/PKG Code No.12/2032-3-2

Lot No.3-2

radiographySatisfactory

Actual Mechanical Properties As Welded

ksi MPa

Yield Strength 59.4 410

Tensile Strength 89.9 620

Elongation % in 2" 16%

Chemical AnalysisC Mn Si P S Cr Mo V Ni

0.08% 0.51% 0.41% 0.008% 0.009% 8.64% 1.01% 0.20% 0.21%

Cu Al N Ti X-Factor0.14% 0.015% 0.020% 0.01% 10

These properties represent a single test performed on a given lot/heat of material. The properties may change on another lot/heat test.

29

Page 18: Esab Chrome Moly electrode Brochure

3030

ESAB Cr-Mo P-91fillEr METAl CrEEP DATA ESAB ASME CErTifiCATE

31

Page 19: Esab Chrome Moly electrode Brochure

33

ESAB ASME CErTifiCATE SAfETy DATA ShEETS

Safety Data Sheets (SDS) are provided for all filler metal products regardless of their respective manufacturing location. A specfic SDS file can be downloaded from www.esabna.com (website) or by contacting ESAB directly.

SDS files are organized by their respective product family, ie. Atom Arc Low Hydrogen Welding Electrodes contain all EXX15 and EXX18 grade of product. Note: below are the various file names and products included.

SDS File No. Product Grouping Product Included

7970-SAtom Arc Low Hydrogen Welding Electrodes

7018-A1 7018-B2L 8018-B2 8018-B3L9018-B3 8018-B6L8018-B6 8018-B89015-B9 9018-B9

7971-2-TDual Shield Low Alloy Flux Cored Welding Electrode

8000-B2 8000-B2L9000-B3 9000-B3LB-6 B-9

8000-FESAB Spoolarc and TIGRODWelding Electrodes and Rods

U-515 (EB2) 13.20 SC (EB3)ER80S-B2ER80S-B6 ER90S-B3ER80S-B8 ER90S-B9

32

Page 20: Esab Chrome Moly electrode Brochure

34 3535

noTES noTES

Page 21: Esab Chrome Moly electrode Brochure

ESAB Welding & Cutting Products www.esabna.com

U.S.A: 411 South Ebenezer Road | Florence, SC 29501-0504Canada: 6010 Tomken Road | Mississauga, Ontario L5T 1X9Mexico: Ave. Diego Diaz de Berlanga No. 130 | Col. Nogalar | San Nicolas de los Garza, N.L. 66480 | Monterrey, MexicoFiller Metal Manufacturing: 801 Wilson Avenue | PO Box 517 | Hanover, PA 17331

COR-1078 5m 3/10

Call 1-800-ESAB-123 or 1-800-933-7070 (Filler Metal Headquarters)

ESAB operates at the forefront of welding and cutting technology. Over one hundred years of continuous improvement in products and processes enables us to meet the challenges of technological advances in every sector in which ESAB operates.

Quality and environment standards Quality and the environment are two key areas of focus. ESAB is one of few international companies to have achieved the new ISO 14001 standard in Environmental Management Systems across all our global manufacturing facilities.

At ESAB, quality is an ongoing process that is at the heart of all our production processes and facilities worldwide. Multinational manufacturing, local representation and an international network of independent distributors bring the benefits of ESAB quality and unrivaled expertise in materials and processes within reach of all our customers, wherever they are located.

World leader in welding and cutting technology and systems

Be Safe When Welding or CuttingPlease read and understand the safety labels, instruction manuals and/or safety data sheet for your welding or cutting product before you weld or cut. Always follow safe practices and use adequate ventilation when welding or cutting. More information on welding health and safety can be found at www.esabna.com.