ERRTH FLEXExterior Finishing

SystemWith

Recycled RubberThe Green Replacement for

Stucco

Double Click To Start

ERRTH FLEX Presentation Choices

Properties, Testing Etc.General Information

Application

EndPhotos

Click Choice To Select

TECHNOLOGY:

ERRTH FLEX is a Water based Acrylic Stucco Substitute Finish that is made with a blend of 100% acrylic resins, premium pigments and Recycled tire Rubber engineered to create a coating with excellent flexibility, durability and adhesion to many surfaces.

Click To Advance

TECHNOLOGY Cont.

• This finish system bonds to the surface forming a durable film

protecting the surface from moisture and weathering.

• For use in new construction and retrofitted projects.

Click To Advance

HISTORY OF TECHNOLOGY:

• Originally developed and formulated in Arizona

• Product has weathered climatic conditions ranging from 30 degrees below zero in Western Canada to 120 degrees in Arizona and Palm Desert California

• First market – New ConstructionClick To Advance

PROBLEMS WITH CONVENTIONAL STUCCO SURFACES:

• Loose fill – high maintenance and Contamination

• Cement based material subject to cracking.

• On site mixing, inexact ratios and wide

variations in properties.• Needs to be painted on a regular basis.

Click To Advance

ERRTH FLEX FEATURES:

• New Construction or Retrofits • Pre Mixed Ready to Install• Laboratory tested • No Painting Costs• Low maintenance• High Strength – Impact Resistant• Contains 100% recycled rubber • Vibrant colors selection and tint

selection• Ten Year Warranty

Click To Advance

ERRTH FLEX BENEFITS:

• Water based for easy cleanup• No on site mixing Comes in 5 Gal. Pails or high volume bins• Very cost effective and user

friendly• No mud cracking • Can be hand or machine applied• UV Blocker• Fire & Mildew Retardant• Heat Reflecting Pigments• Wide climatic region application

rangeClick To Advance

FINISHES:• Textures:

• Smooth to Grooves

• Colors:• Any Color of the

Rainbow

Click To Advance

COVERS:• Insulated Concrete Forms (ICF)• Concrete Stucco• Masonry Block• OSB• Gypsum• Polystyrene Foam• Fiberglass Panels• And More

Click To Advance

ADVANTAGES:

• Excellent U.V. Resistance• U.V. Reflector• Heat Reflector• Low Toxicity • Fire Retardant• Great Durability• Flexible

Click To Advance

ADVANTAGES Cont:• Low V.O.C. / Low Odor• Good Freeze Thaw Recovery• Crack Resistant• Excellent Weathering• Base Coat With Mesh Covers

Cracks & Flaws in Substrate

Return

PHYSICAL PROPERTIES:

• Accelerated Weathering (ASTM G-23) No damage after 5,000 hours continuous exposure.

• Mildew Resistance (ASTM D3273)Passes 4 week exposure with no growth.

Click To Advance

PROPERTIES Cont:

• Abrasion Resistance 500 Liters of sand. No effect

• Freeze Thaw Resistance No cracking, checking or peeling.

• Water Resistance No damaging effects.

• Moisture Resistance (ASTM D-2247)No damaging effects after 14 days.

• Dry Time 77˚F (25˚C) & 50% Rel. Humidity. To Touch: 24 to 36 hours To Recoat: 2 hours Click To Advance

PRODUCT TESTING:

Click To Advance

FIRE TESTING:

Click To Advance

FIRE TESTING Cont.

Click To Advance

SHELF LIFE:

• Twelve months when stored at an ambient temperature of 75o F at 0 - 90% humidity

• DO NOT ALLOW TO FREEZE.

Click To Advance

COVERAGE:

• Base Coat with Mesh – 100 - 110 sq. ft. / Pail

• Top Coat – 120-140 sq. ft. / Pail

Return

SURFACE PREPARATION:• Surfaces should be free of defects and

contamination. All contaminants such as dust, dirt, efflorescence, mold, mildews, adhesives, glues, oils, soaps, wax, surface sealers and medium to heavy chalk must be removed to ensure proper adhesion to the substrate. Cleaners or degreasers such as Tri Sodium Phosphate or other equal to concrete cleaners have been used successfully.

• All cleaners or removers must be rinsed entirely clean from the substrate. Chipping or peeling paint must be removed prior to application of Errth Flex . Rinse substrate thoroughly and allow to dry.

Click To Advance

APPLICATION:

• Do not apply the Errth Flex system below 45o F. Best results are obtained when surface and air temperatures are above 50o F and below 100o F. Surfaces should prepped, clean, dry and sound.

• Errth Flex Base Coat should cure for 24hours before the application of Errth Flex Top Coat. Times will vary due to weather conditions. Concrete surfaces must be cured for 28 days before application.

Click To Advance

Applying Base Coat To House In St. Lucia W.I.

Click To Advance

Applying Errth Flex With A Trowel

Spraying Errth Flex

Click To Advance

Click On Picture To Show Video

MAINTENANCE:

• Cleaning – Power washer or hose • Washing – mild detergent 5:1

• No Need to Repaint or redo for 20 years or longer except to change color.

Return

Marina At Cottonwood Cove NVFirst FEED Registered Floating Building In The World

Click To Advance

Laundry and Market in Chandler AZTwo Tone Errth Flex Coating

Click To Advance

House in Payson AZ

Click To Advance

Finished St. Lucia W.I. House

Click To Advance

Click To Advance

House in Tempe, AZ

Before Remodeling

After Coating With Errth Flex

Sun Valley Community Church, Gilbert, AZ

Click To Advance

House in Calgary Canada

Return