Equipment That A Dentist Need
-
Upload
charles-brown -
Category
Documents
-
view
214 -
download
0
description
Transcript of Equipment That A Dentist Need
BRIEF INTRODUCTION
DENTAL EQUIPMENT SPECIALISTS AND REPAIR SERVICE TECHNICIANS CAN
ASSIST WITH YOUR DENTAL PROBLEMS AND HELPS IN SETTING UP OR FIX YOUR
NEEDS.
Equipment that a dentist need
Different types of DT Scanners and Mills
Identica ScannerExocad CAD SoftwareImes – Icor millsROI
Identica Scanner The Identica scanner is a high end 3D scanner
developed completely for dental CAD/CAM applications. The Identica scanner gives laboratories the capability to capitalize on production and cost efficiency.
Identica Scanner
Features :- 3D White light scanner Twin-camera Technology Deep 3D scanning area Sharp margin line Fast scanning speed Open system Broad applications
Exocad CAD Software
Exocad CAD software is simple for use and the work with high speed, which helps to high productivity and lower the training cost. When dealing with difficult cases on a every day basis it helps to a great level.
Imes – Icor mills
It provides accurate data for quality and well, especially for the harder resources, like glass ceramics and chrome cobalt.
High value machine componentsSimplest device managementAppropriate in practice labs or as additional
lab system
Different types of Bio Zˣ² Zirconia Products
Bio Zˣ² Zirconia Discs
Bio Zˣ² Zirconia Milling Burs
Bio Zˣ² Zirconia Shading Liquid
Bio Zˣ² Zirconia Discs
Full-ceramic scaffolding material for maximum aesthetic claims
High translucencyLarge signal spectrumOutstanding mechanical propertiesGreat fitting of all restorationsInfinite biocompatibilityResistance to ageing
Bio Zˣ² Zirconia Milling Burs
Milling bur is the key contact point connecting your milling machine and the Dental material.
Cutting parameters of the bur and the settings of the milling machine have to equivalent perfectly for optimum results.
Bio Zˣ² Zirconia Shading Liquid
Here there is the ideal combination of zirconium oxide and dyeing liquids.
It is a simple and specific way to get the tooth color you need.
Zirconia material is being used by manufacturers is atetragonal polycrystalline zirconia, stabilized with yttrium oxide.
Zirconia Milling
BruxZir™ Full Contour Zirconia Lava™ Zirconia
Lava™ Ultimate Restorative Lava™ Plus Zirconia
Fixed Restorations
DAL Tech PFMs Full Cast Restorations
IPS e.max® Press Captek™
Removables
DuraFlex™ Flexible Partials Valplast® FlexiblePartials
Vitallium® 2000 Plus Partial Dentures Full Dentures
DT Technologies
Thank You