equipment news letter - Yolaabedalitex.yolasite.com/resources/equipment news letter.pdf1...

ABEDALI TEXABEDALI TEXABEDALI TEXABEDALI TEX

Fact: 01 Dhanua, Sreepur, Gazipur(Prop), Fact: -02 Balla, Kalihati, Tangail, Bangladesh,

Reg. Office: 17/E/3 Modhubag, Moghbazar, Dhaka-1217, Sales office: Ovijan #48,Surtaranga Road, Charagali,Tongi,Gazipur

Phone: +8801199539820, 01772916443, E-mail: [email protected], www. abedalitex.yolasite.com

1

Dear sir

We have available the following equipment; subject to prior sale:

PROPOSAL NO. 14399PROPOSAL NO. 14399PROPOSAL NO. 14399PROPOSAL NO. 14399----RS$RS$RS$RS$

OPENING AND CLEANING: 1 Rieter Unifloc Automatic Bale Opener Model A10 1700mm Head Year: 1995 1 Rieter UniMix Blender Model B 7/3 Year: 1995 1 Rieter UniFlex Model B60 Year: 2000 COMBING: 1 Vouk Lap Winder Model RD300/2T Automatic doffing Lap Spool 300mm Year: 1997 8 Vouk Combers Model CM.400S Automatic Can Changer Single Delivery Can Size 24 x 48 inches Year: 1997 1 Vouk Comber Model CM.500N Automatic Can Changer Single Delivery Can Size 24 x 48 inches Year: 2006





2

WINDING 10 Savio Automatic Winders Model Espero-E 6 Right hand – 6 Left hand 48 spindles Automatic CBF feed Steel Drums – 2 wind Cone take up 3 deg 51 1 Doffer Mesdan 490L Splicers Waxing Uster-Peyer Clearers with MK.C20 sensors (1) Uster Quantum 2 (6) Uster Clearer (3) Uster Peyer Clearer Overhead blower Year: 1997 [Abedali Tex-Bangladesh]

We have available the following COMPLETE SCHLAFHORST OPEN END SPINNING PLANT; subject to prior sale:

PROPOSAL NO. 5918-OE-CP-REV Blowroom: (5 Lines (Cotton) - 1 Line (Blends) LINE 1) 1 TRUETZSCHLER BALE OPENER Type Blendomat BO-A Year: 2007 Arm Length 2300 mm Bale Layout 20 m 1 TRUETZSCHLER MULTIFUNCTION SEPERATOR Type SP-MF Year: 2007 1 TRUETZSCHLER MIXER





3

Type MX-1 Year: 2007 10 cells linked with: 1 TRUETZSCHLER FINE OPENER Type CL-C4 Year: 2007 1 COMPLETE TRUETZSCHLER 3-COMPONENT MIXING LINE Year: 2008 each line consisting of: 1 Fine Opener, Type BL-FC 1200 2 Weighing Feeders, Type BL-HW 1600, automatic feeding 1 Weighing Feeder, Type BO-W 1600, manual feed table 3m 1 Hopper Feeder, Type BO-R with manual feed table 4m 1 TRUETZSCHLER DOSING OPENER Type FD-S/FD-U 1200 Year: 2008 1 TRUETZSCHLER MIXER Type MX-1 Year: 2008 10 cells linked with: 1 TRUETZSCHLER TUFTOMAT Type TO-T1 Year: 2008 1 TRUETZSCHLER WASTE FEEDER Type BO-R Year: 2007 with Feeding table, width 1000mm, length 4m Price: F.O.T. USD 600,000.00 LINE 2) 1 COMPLETE TRUETZSCHLER 3-COMPONENT MIXING LINE





4

Year: 2008 each line consisting of: 1 Fine Opener, Type BL-FC 1200 2 Weighing Feeders, Type BL-HW 1600, automatic feeding 1 Weighing Feeder, Type BO-W 1600, manual feed table 3m 1 Hopper Feeder, Type BO-R with manual feed table 4m 1 TRUETZSCHLER DOSING OPENER Type FD-S/FD-U 1200 Year: 2012 1 TRUETZSCHLER MIXER Type MX-1 Year: 2008 10 cells linked with: 1 TRUETZSCHLER TUFTOMAT Type TO-T1 Year: 2008 Price: F.O.T. USD 400,000.00 LINE 3&4) 1 TRUETZSCHLER BALE OPENER Type Blendomat BO-A Year: 2007 Arm Length 2300 mm Bale Layout 42 m 1 TRUETZSCHLER WASTE FEEDER Type TO-C Year: 2008 with Feeding table, width 1000mm, length 4m 1 TRUETZSCHLER MULTIFUNCTION SEPERATOR Type SP-MF Year: 2008 2 TRUETZSCHLER MIXERS





5

Type MX-1 Year: 2007 10 cells linked with: 2 TRUETZSCHLER FINE OPENERS Type CL-C4 Year: 2007 2 TRUETZSCHLER DEDUSTERS Type DUSTEX SP-DX Year: 2007 Price: F.O.T. USD 350,000.00 LINE 5&6) 1 TRUETZSCHLER BALE OPENER Type Blendomat BO-A Year: 2007 Arm Length 2300 mm Bale Layout 42 m 1 TRUETZSCHLER WASTE FEEDER Type BO-R Year: 2008 with Feeding table, width 1000mm, length 4m 1 TRUETZSCHLER MULTIFUNCTION SEPERATOR Type SP-MF Year: 2008 2 TRUETZSCHLER MIXERS Type MX-1 Year: 2008 10 cells linked with: 2 TRUETZSCHLER FINE OPENERS Type CL-C4 Year: 2008





6

2 TRUETZSCHLER DEDUSTERS Type DUSTEX SP-DX Year: 2007 Price: F.O.T. USD 350,000.00 Carding: 34 TRUETZSCHLER CARDS Type TC 03 Year: 2007 (11) 2008 (21) 2011 (2) with IDF Draw Head with FBK Chute Feed Can Size 40” with Can Coiler, Type KHS Price: F.O.T. – 2007 USD 75,000.00 each - 2008 USD 75,000.00 each - 2011 USD 180,000.00 (2) 4 TRUETZSCHLER CARDS Type TC 7 Year: 2010 (1) 2011 (3) with IDF Draw Head with FBK Chute Feed Can Size 40” with Can Coiler, Type KHS Price: F.O.T. USD 400,000.00 Lot Drawing: 17 TRUETZSCHLER DRAW FRAMES Type TD 03 Year: 2007 (5) 2008 (11) 2011 (1) Can Size 18” with Can Coiler with Power Creel, 8 Pos.





7

Color LCD Monitor 1 TRUETZSCHLER DRAW FRAME Type TD 07 Year: 2014 (ORIGINAL PACKED) Can Size 18” with Can Coiler with Power Creel, 8 Pos. Color LCD Monitor Price: F.O.T. – 2007 USD 35,000.00 each - 2008 USD 38,000.00 each - 2011 & 2014 USD 100,000.00 OE-Spinning: 19 SCHLAFHORST OPEN END SPINNING FRAMES Type ACO 8 Year: 2011 (13) USD 300,000.00 each 2013 (6) USD 360,000.00 each 288 Pos. Rotor dia. 28 mm Opening Rollers, Type B 174 DN with Corolab Clearers, Type XQ 2 Piecers Waxing Device SRZ Setup (SRK avail.) Spin box SE 20 Synchro Piecing 6 Digi Piecing EVA Vacuum Electronic Price: F.O.T. 26 SCHLAFHORST OPEN END SPINNING FRAMES Type SE 9 ACO 240 Year 1991 (20) 1992 (6) 240 Pos.





8

Rotor dia. 33 mm Opening Rollers, Type B 174 DN without Corolab Clearer 2 Piecers Waxing Device KSK 4 Navels SRZ Setup Spin box SE 9 Price: F.O.T. USD 18,000.00 each 1 SCHLAFHORST OPEN END SPINNING FRAMES Type SE 9 ACO 240 Year: 1992 240 Pos. Rotor dia. 33 mm Opening Rollers, Type B 174 DN with Corolab Clearer 2 Piecers Waxing Device KSK 4 Navels SRZ Setup Spin box SE 9 Price: F.O.T. USD 24,000.00 6 SCHLAFHORST OPEN END SPINNING FRAMES Type SE 9 ACO 288 Year: 1993 (1) 1994 (5) 240 Pos. Rotor dia. 33 mm Opening Rollers, Type B 174 DN without Corolab Clearer 2 Piecers Waxing Device KSK 4 Navels SRZ Setup Spin box SE 9 Price: F.O.T. USD 30,000.00 each





9

7 SCHLAFHORST OPEN END SPINNING FRAMES (Parts) (6 dismantled / 1 still installed) Type SE 9 ACO 240 Year: 1991 240 Pos. Rotor Dia. 33 mm Opening Rollers, Type B 174 DN 2 Piecers Waxing Device KSK 4 Navels SRZ Setup Spin box SE 9 Price: F.O.T. USD 75,000.00 each Waste Room: 2 CONTINENTAL (FRANCE) VACUUM BLOWERS Type 151A.06 Year: 2006 3500 rpm. Price: F.O.T. USD 25,000.00 Lot 1 RIETER WASTE FEEDER Type B 3/4 Year: 2002 with Feeding Table 1600mm, length 2m Price: F.O.T. USD 25,000.00 1 RIETER FINE OPENER Type B 11-Uniclean Year: 2002 with Jossi Metal Detector 3 MAREN HORIZONTAL WASTE BALER LINES Year: Mid. 90´s Bale Size 30” by 30” automatic strapping with 5 ABBINGTON FINE DUST FILTERS 5 PNEUMAFIL FINE DUST FILTERS Year: Mid. 90´s





10

Price: F.O.T. USD 95,000.00 Lot Accessories: 1 IMA ENG. (ISRAEL) UNPACKING MACHINE to open the PVC packed cotton bales Year: Mid. 80´s with KEN MILLS Press, Type T40 F/B Price: F.O.T. Offers 1 TRUETZSCHLER CARD CLOTHING MACHINE Type TCC-RFM 40” Year: 2010 1 TRUETZSCHLER CARD CLOTHING MACHINE Type TCC-RFG 40” Year: 2010 Price: F.O.T. USD 25,000.00 Lot 3 KARDEX -INDUSTRIEVER MATERIAL STORAGE SYSTEMS Type SYS 250 Year: 2010 Capacity max. 7700 kg Price: F.O.T. USD 45,000.00 Lot SPARE PARTS / Approx. Value – 2.5 MILLION Price: F.O.T. To be Determined 374 PVC CARD CANS Diameter 40” Price: F.O.T. USD 100.00 each 23,000 PVC SPIN CANS Diameter 18” Price: F.O.T. USD 25.00 each 190,000 TUBES Price: F.O.T. To be Determined Location: Mediterranean Available: Immediately





11

ab-gib We have available the following Zinser Compact Ring Spinning Plant, Year 2004; subject to prior sale:

PROPOSAL NO. 14995 Blowroom 1 Rieter Bale Opener Model A11 Head 2300mm 27 meter Track 3 bales across lay down Year 2004 2 Rieter UniFlex Model B60 Year 2004 2 Rieter UniMix Model B70 4 Cell Year 2004 1 Rieter UniClean Model B11 Year 2004 Carding: 10 Rieter Cards Model C51 Chute Feed Model A70 Auto Can Changer 40 x 48 inch Cans Year 2004 Combing 2 Rieter Pre-Combing Draw Frames Model RSB-2





12

with 8 line creel Year 2004 2 Rieter UniLaps Model E32 Year 2004 10 Rieter Combers Model E62 8 Heads Auto Can Change 24 x 48 inch cans Year 2004 Drawing: 6 Rieter Draw Frames Model RSB-D-35 8 End Creel Autoleveller Auto Can Change 20 x 48 Inch Can Delivery Year 2004 Roving 6 Zinser Roving Frames Model 670 120 Spindles with Manual Doff Year 2004 Ring Spinning & Winding 18 Zinser Compact Ring Spinning Frames Model RM.700 1008 Spindles 75mm Gauge 38mm Ring Diameter 210mm Tube Length 75mm middle line draft Roving Creel





13

Auto Doffing and Conveyor to Doff Box Year 2004 10 Zinser Ring Spinning Frames Model 350 1200 Spindles 70mm Gauge 38mm Ring Diameter 210mm Tube Length 75mm middle line draft Roving Creel Auto Doffing and Conveyor to Doff Box Year 2004 6 Murata Automatic Magazine Feed Winders Model 21C Process Coner 60 Spindles 9 Position Round Magazine Feed 2.5 Turn Drums 6 inch Traverse Air Splicing with G2Z prisms Loepfe Clearers with TK-830 sensors Year 2004 2 Murata Automatic Magazine Feed Winders Model 21C Process Coner 60 Spindles 9 Position Round Magazine Feed 2.5 Turn Drums 6 inch Traverse Air Splicing with G2Z prisms Loepfe Clearers with TK-930 sensors Year 2004 Twisting 4 Murata Doublers Model No28 120 Spindles Double Sided





14

Two package creel Tube Take up 6 inch traverse Year 2004 25 Murata Two for One Twisters Model 3C1 192 Spindles Assembly wound feed Free Balloon Air Threading 146mm Pot Diameter 6 inch Cone Take up 4 Deg 20 cone angle Year 2004 Yarn Laboratory 1 Uster Even-Ness Tester Model UT4 with Creel and Printer plus PC Year 2004 1 Uster HVI Spectrum Cotton Tester with PC and Printer Year 2004 1 Uster AFIS Pro with PC Year 2004 1 Uster Classimat Yarn Tester Model Quantum Mounted on 6 spindle Winder with PC and Printer Year 2004 Price: ex-mill floor USD 9,000,000.00





15

ab-gib We have available the following Murata MVS Spinning Plant; subject to prior sale:

PROPOSAL NO. 14371-5918 Blowroom 1 TRUETZSCHLER BALE OPENER Type Blendomat BO-A Year: 2007 Arm Length 2300 mm Bale Layout 20 m 1 TRUETZSCHLER MULTIFUNCTION SEPERATOR Type SP-MF Year: 2007 1 TRUETZSCHLER MIXER Type MX-1 Year: 2007 10 cells linked with: 1 TRUETZSCHLER FINE OPENER Type CL-C4 Year: 2007 1 COMPLETE TRUETZSCHLER 3-COMPONENT MIXING LINE Year: 2008 each line consisting of: 1 Fine Opener, Type BL-FC 1200 2 Weighing Feeders, Type BL-HW 1600, automatic feeding 1 Weighing Feeder, Type BO-W 1600, manual feed table 3m 1 Hopper Feeder, Type BO-R with manual feed table 4m 1 TRUETZSCHLER DOSING OPENER Type FD-S/FD-U 1200 Year: 2008 1 TRUETZSCHLER MIXER





16

Type MX-1 Year: 2008 10 cells linked with: 1 TRUETZSCHLER TUFTOMAT Type TO-T1 Year: 2008 1 TRUETZSCHLER WASTE FEEDER Type BO-R Year: 2007 with Feeding table, width 1000mm, length 4m Carding: 4 TRUETZSCHLER CARDS Type TC 03 Year: 2007 with IDF Draw Head with FBK Chute Feed Can Size 40” with Can Coiler, Type KHS Drawing: 4 TRUETZSCHLER DRAW FRAMES Type TD 03 Year: 2007 Can Size 18” with Can Coiler with Power Creel, 8 Pos. Color LCD Monitor VORTEX SPINNING: 9 MURATA VORTEX AIR JET SPINNING FRAMES Model 861 80 Positions. Cylindrical Take-up with Muratec Yarn Clearers with Murata VOS Monitoring System with two Automatic Knotters Model 86.C





17

with one Automatic Doffer Model 86.D with Full Length Doff Tray Without Conveyor Year: 2005 Total Price: FOT USD 2,450,000.00 ab-rg 40 VAMATEX LEONARDO weaving looms year 2002-2003 , 220 cm working width

Equipped with Staubli 2670 electronic dobby for 20 levers (16 levers fitted) , 6 colours, Leno selvedges

14 of these looms are also equipped with additional UPPER WARP BEAM

Accessories :

1 warp beam (800 mm) , 1 cloth roller , 14 heald frames , 2 weft accumulators

5000 droppers , 5000 heald wires

currently weaving shirting fabrics

Delivery : 24 looms July 2015 , 16 looms August 2015

ab-gib

We have available the following equipment; subject to prior sale:

PROPOSAL NO. 14399-RS$ OPENING AND CLEANING: 1 Rieter Unifloc Automatic Bale Opener Model A10 1700mm Head Year: 1995 Tag #84982 1 Rieter UniMix Blender Model B 7/3 Year: 1995 Tag #84981 1 Rieter UniFlex Model B60 Year: 2000 Tag #84980 COMBING: 1 Vouk Lap Winder Model RD300/2T





18

Automatic doffing Lap Spool 300mm Year: 1997 Tag #84813 8 Vouk Combers Model CM.400S Automatic Can Changer Single Delivery Can Size 24 x 48 inches Year: 1997 Tag #84804-811 1 Vouk Comber Model CM.500N Automatic Can Changer Single Delivery Can Size 24 x 48 inches Year: 2006 Tag #84812 WINDING 10 Savio Automatic Winders Model Espero-E 6 Right hand – 6 Left hand 48 spindles Automatic CBF feed Steel Drums – 2 wind Cone take up 3 deg 51 1 Doffer Mesdan 490L Splicers Waxing Uster-Peyer Clearers with MK.C20 sensors (1) Uster Quantum 2 (6) Uster Clearer (3) Uster Peyer Clearer Overhead blower Year: 1997





19

Tag #84821-830 ab-gib We have available the following Power Generation Plant; subject to prior sale:

PROPOSAL NO. 5488PROPOSAL NO. 5488PROPOSAL NO. 5488PROPOSAL NO. 5488----CP CP CP CP

1111 Natural Gas Fired Power Generation PlantNatural Gas Fired Power Generation PlantNatural Gas Fired Power Generation PlantNatural Gas Fired Power Generation Plant

Type Centaur 40S

Year 2001

Power at 50HZ

Natural Gas Fuel

Output Power 3500 kW (3.5mw) (4700 hp)

SoLoNOx

Heat rate 12905 kJ/kW-hr

Weight 15 Tons

27766 total hours

332 Starts

Last inspection 2005

Plant stopped in 2005

Consisting of:

One TUMA TURBOMACH Gas TurbineOne TUMA TURBOMACH Gas TurbineOne TUMA TURBOMACH Gas TurbineOne TUMA TURBOMACH Gas Turbine

Type Centaur 40S

Serial Number 10662

Year of Manufacture 03/2001

Speed 14944 RPM

Fuel Natural Gas 14 bar

Exhaust Flow 68 185 kg/hr

Exhaust Temperature 445 °C

Turbine Efficiency 2.9 % (Heat Rate 12905 kJ/kWh)

One LEROY SOMER GeneratorOne LEROY SOMER GeneratorOne LEROY SOMER GeneratorOne LEROY SOMER Generator

Output Power 3650 kW (4563 kVA, Cos phi 0.8)

Frequency 50 Hz

Voltage: 6300 V

Speed 1500 RPM

Weight 15 Tons

One GEAR UNIT CaterpillarOne GEAR UNIT CaterpillarOne GEAR UNIT CaterpillarOne GEAR UNIT Caterpillar

Input Speed 14944 RPM

Output Speed 1500 RPM

Epicyclical Gear





20

Total Price:Total Price:Total Price:Total Price: F.O.F.O.F.O.F.O.T.T.T.T. Italy Mill Italy Mill Italy Mill Italy Mill

EURO EURO EURO EURO 365,000.00365,000.00365,000.00365,000.00

ab-gib We have available the following MARZOLI Spinning Unit, subject to prior sale:

PROPOSAL NO. 5488PROPOSAL NO. 5488PROPOSAL NO. 5488PROPOSAL NO. 5488----CP CP CP CP

SPINNING UNIT:SPINNING UNIT:SPINNING UNIT:SPINNING UNIT:

BLOWROOM:BLOWROOM:BLOWROOM:BLOWROOM:

1 1 1 1 MARZOLI BALE OPENERMARZOLI BALE OPENERMARZOLI BALE OPENERMARZOLI BALE OPENER

Type B 12/E

Year 1990

Arm Length 1.7 meter

Bale Layout 30 m

2 2 2 2 MARZOLI SEPARATORSMARZOLI SEPARATORSMARZOLI SEPARATORSMARZOLI SEPARATORS

Type B 160

Year 1990

6666 MARZOLI MIXERSMARZOLI MIXERSMARZOLI MIXERSMARZOLI MIXERS

Type B 142

Year 1990

4 Cells

4444 MARZOLI FINE OPENERSMARZOLI FINE OPENERSMARZOLI FINE OPENERSMARZOLI FINE OPENERS

Type B 34

Year 1990

1111 MARZOLI FINE OPENERMARZOLI FINE OPENERMARZOLI FINE OPENERMARZOLI FINE OPENER

Type B 37

Year 2002

15151515 MARZOLI CONDENSORSMARZOLI CONDENSORSMARZOLI CONDENSORSMARZOLI CONDENSORS

Type B 41

Year 1990

1111 MARZOLI CONDENSORMARZOLI CONDENSORMARZOLI CONDENSORMARZOLI CONDENSOR

Type B 44





21

Year 2002

3333 MARZOLI OPENERMARZOLI OPENERMARZOLI OPENERMARZOLI OPENER

Type B 31

Year 1990

1111 MARZOLI DEDUSTERMARZOLI DEDUSTERMARZOLI DEDUSTERMARZOLI DEDUSTER

Type B 46

Year 1995

1111 MARZOLI OPENERMARZOLI OPENERMARZOLI OPENERMARZOLI OPENER

Type B 11

Year 1990

1111 MARZOLI CONTROL PANELMARZOLI CONTROL PANELMARZOLI CONTROL PANELMARZOLI CONTROL PANEL

Type B 92

Year 2002

DRAWING:DRAWING:DRAWING:DRAWING:

4444 VOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMES

Type SH2/DCC

Year 1990

Can Size 40”

Creel for 8 Pos.

5555 VOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMESVOUK DOUBLE HEAD DRAW FRAMES

Type SH2/DCC-E

Year 1990

Can Size 24”

Creel for 16 Pos

.

1111 VOUKVOUKVOUKVOUK DOUBLE HEAD DRAW FRAMEDOUBLE HEAD DRAW FRAMEDOUBLE HEAD DRAW FRAMEDOUBLE HEAD DRAW FRAME

Type VS/4A DCB-2

Year 1995

Can Size 24”

Creel for 16 Pos.

ROVING:ROVING:ROVING:ROVING:

1111 MARZOLI ROVING FRAMEMARZOLI ROVING FRAMEMARZOLI ROVING FRAMEMARZOLI ROVING FRAME

Type BC 16/S

Year 1990

108 Pos.

Full Bobbin Size 16” x 6”





22

RINGSPINNING:RINGSPINNING:RINGSPINNING:RINGSPINNING:

11111111 MARZOLI LINKED RINGSPINNING FRAMESMARZOLI LINKED RINGSPINNING FRAMESMARZOLI LINKED RINGSPINNING FRAMESMARZOLI LINKED RINGSPINNING FRAMES

Type NSF 2/L

Year 1989

912 Pos.

Ringdia. 45 mm

Gauge 75 mm

Tubelength 220 mm

(5) with Caipo Slubbing (5) with Caipo Slubbing (5) with Caipo Slubbing (5) with Caipo Slubbing

& Twisting Device, & Twisting Device, & Twisting Device, & Twisting Device,

Type CSTU 1512, Year 2004

(3) with Caipo Slubbing Device, (3) with Caipo Slubbing Device, (3) with Caipo Slubbing Device, (3) with Caipo Slubbing Device,

Type 1516, Year 1990

(3) w/Caipo Slubbing Device(3) w/Caipo Slubbing Device(3) w/Caipo Slubbing Device(3) w/Caipo Slubbing Device

& Pinter Core Yarn & Pinter Core Yarn & Pinter Core Yarn & Pinter Core Yarn

Attachment (Spandex), Attachment (Spandex), Attachment (Spandex), Attachment (Spandex),

Year 2002

linked with :linked with :linked with :linked with :

11111111 MURATA LINK WINDERSMURATA LINK WINDERSMURATA LINK WINDERSMURATA LINK WINDERS

Type MACH 7-2 (88 SX)

Year 1989

30 Pos. installed

33 Pos. possible

Uster Cleaner, Type D4ab-gib

with MK-C20-A2 Heads

Traverse 6”

Conicity 4deg20

MMM-Microprocessor

TOTAL PRICE:TOTAL PRICE:TOTAL PRICE:TOTAL PRICE: F.O.T.F.O.T.F.O.T.F.O.T. ITALY MILL ITALY MILL ITALY MILL ITALY MILL

EUROEUROEUROEURO 275,0275,0275,0275,0

ab-kibo We can offer; ···· USTER TENSOJET High Speed strength tester (tensile tester)USTER TENSOJET High Speed strength tester (tensile tester)USTER TENSOJET High Speed strength tester (tensile tester)USTER TENSOJET High Speed strength tester (tensile tester)

···· Year 1994Year 1994Year 1994Year 1994

···· Serial No UTS4716.1005Serial No UTS4716.1005Serial No UTS4716.1005Serial No UTS4716.1005

···· Price Price Price Price ---- 33,000/33,000/33,000/33,000/---- EUR CNFEUR CNFEUR CNFEUR CNF

···· Good working conditionGood working conditionGood working conditionGood working condition





23

Photo: Avaible Photo: Avaible Photo: Avaible Photo: Avaible

Inspection: anyInspection: anyInspection: anyInspection: any timetimetimetime

Location: IndiaLocation: IndiaLocation: IndiaLocation: India

ab-pitt

The price can be reasonable if interested -

9 Picanol Gamma-8J

with SUMO Motor

YOC - 2000-01

WW - 340 cm

with Bonas Jacquard CSJ/ACJ/DSJ

Each loom with

4 Accumulators

2 Warp Beam & Cloth Roll

Droppers as on looms

Price - Euro 25,000 CNF Major Ports Each

Location - Schengan Area

ab-gb We have available the following Picanol Air Jet Looms; subject to prior sale:

PROPOSAL NO. 15004PROPOSAL NO. 15004PROPOSAL NO. 15004PROPOSAL NO. 15004

40404040 Picanol Air Jet Picanol Air Jet Picanol Air Jet Picanol Air Jet LoomLoomLoomLoomssss

Model Omni Plus -800

190cm weaving width

2 color

Staubli Cam Motion

Electronic Take up

Electronic Let off

On Loom Cloth Roller

Leno Selvedges





24

Each Each Each Each loomloomloomloom withwithwithwith

1.5 Warp Beams

1.5 Cloth rollers

2 weft feeders

6 harness frames

Droppers and Healds as fitted

Year: 2007



220cm weaving width

2 color

Staubli Cam Motion

Electronic Take up

Electronic Let off


Leno Selvedges


1.5 Warp Beams

1.5 Cloth rollers

2 weft feeders

6 harness frames


Year: 2007



220cm weaving width

4 color

Staubli Electronic Dobby

Electronic Take up

Electronic Let off


Leno Selvedges


1.5 Warp Beams

1.5 Cloth rollers

2 weft feeders

6 harness frames


Year: 2007





25



220cm weaving width

2 color

Staubli Electronic Dobby

Electronic Take up

Electronic Let off


Leno Selvedges


1.5 Warp Beams

1.5 Cloth rollers

2 weft feeders

6 harness frames


Year: 2007

Price:Price:Price:Price: exexexex----mill floormill floormill floormill floor To be NegotiatedTo be NegotiatedTo be NegotiatedTo be Negotiated

ab-ak

16 Sulzer P7100 Looms

12 P7100 B 390 N4 EP D1 - Serial 111,000+

4 P7100 360 N2 EP Q D1 - Serial 123,000+

with Split beam arrangement

No TLL

Each loom with

2-4 Accumulators

6-8 Heald Frames

1.5 Warp Beam & Cloth Roll

Heddles n Droppers as on Looms

Running in Excellent Condition





26

ab-gb We have available the following Picanol Weaving Looms; subject to prior sale:

PROPOSAL NO. 5933PROPOSAL NO. 5933PROPOSAL NO. 5933PROPOSAL NO. 5933----WEAWEAWEAWEA

2 2 2 2 PICANOL AIRJET WEAVING PICANOL AIRJET WEAVING PICANOL AIRJET WEAVING PICANOL AIRJET WEAVING LOOMLOOMLOOMLOOMSSSS

Type Omni Plus

Year 2004

Working width 1900 mm

with STAUBLI Cam Motion, Type 1761

8 Levers installed

2 Colors

Speed approx. 900 rpm.

with PRA System (Pick Repair Automation)

with Optical Weft Stop Motion

Full Beam Execution

Elsy Cutting Selvedge Motion

Prepared for Tuck.in Selvedge

Each Each Each Each loomloomloomloom eqeqeqequipped with:uipped with:uipped with:uipped with:

1 Full Warp Beam, Flange dia. 1100 mm

1 Neuenhauser Batcher with Inspection Frame

5000 Heedles & Drop Wires

2 IRO Weftfeeders, Type 1131 CANPLUS

6 Drop Wire Bars

Location: Europe

Available: Immediately

Price:Price:Price:Price: F.O.T.F.O.T.F.O.T.F.O.T. EUROEUROEUROEURO 28,000.00 each28,000.00 each28,000.00 each28,000.00 each

ab-gb 68 Sulzer Ruti / Toyoda Air Jet Looms Model L.5200.B.250.N2 (TOYODA JAT.610) 2500mm weaving width Positive Plain Crank Motion 2 Color weft insertion with Profile reed system Single Beam Execution Electronic Let off On Loom Cloth Roller Take Up Side Tuck-in Units Left and Right Each Loom supplied with 1 Warp Beam 1000 mm dia Beam flange 2 Weft accumulators feeders





27

4 Heald Frames Heald wires and Dropper Pins as fitted 1 Cloth Roller Tag #83845-83912 Year 1995 78 Sulzer Ruti / Toyoda Air Jet Looms Model L.5200.B.250.N2 (TOYODA JAT 610) 2500mm weaving width Positive Plain Crank Motion 2 Color Weft Insertion with Profile Reed System Single Beam Execution Electronic Let-Off On Loom Take-Up 1 Warp Beam 1000 mm dia Beam Flange 2 Weft Accumulator Feeders Heald Wires and Dropper Pins as Fitted 1 Cloth Roll Tag #83987-#84066 (Void Tag#84000) Year: 1995 ab-rg Ref: B09 7648

72 PICANOL OMNI PLUS AIR JET LOOMS 3400 MM WW Staublı 2861 dobby 2002 4 colour beam diameter 800 mm max. speed 650 rpm number of drop wire bars 6 dobby for maximum 16 frame 3 weft accumulators per loom 1.5 warp beams and 1.5 cloth beams per loom SUMO motor Electronic speed adjustment ab-ragh We are sending the following Toyota Shuttle looms Model GH8 56

> and China make shuttle looms Model GA615 A-3. If any interest kindly

> contact us for further details.





28

> 453 X Shuttle looms GH8 Cop change

> • Model GH8 56

>

> • Make Toyoda Japan

>

> • Year 1980

>

> • Working width 56 “

>

> • Nos of machines ( 120 X Dobby YAMADA type EDX and 333 X

> without dobby )

>

> • Held frames 4

>

> • Shuttle cop change

>

> • Beam Dia 65 cm

>

> • 1, 5 beam

>

> • 1.0 cloth Roll ( for 1,5 cloth Roll not confirmed yet )

>

> • Conditions : 112 machines are stopped and the others running.

> 70 X Shuttle Looms RRX 1 X 4 ( China make )

> * YOM 2007

> * WW. 60 X 56” and 10 X 63”

> * Model GA615 A-3

> * With dobby up side 12 machines for w.w 56” the others without

> dobby

> * Kamran 4

> * Cloth roll 1.5

> * Beam 1.5

ab-gb NEWS LETTER MAY 2015

We have available the following Used Textile Machinery for immediate sale and delivery, subject to prior sale: If you are in need of Textile Machinery of any type If you are in need of Textile Machinery of any type If you are in need of Textile Machinery of any type If you are in need of Textile Machinery of any type –––– Your first calYour first calYour first calYour first call Must be Gibbsl Must be Gibbsl Must be Gibbsl Must be Gibbs





29

For further details – Please contact contact Raymond Hargreaves Direct e mail address – [email protected]

Spinning:Spinning:Spinning:Spinning: Prop 5918 - Complete Trutzschler Opening – Cleaning and Blending from year 2007 & 2008 Prop 5918 – Oerlikon- Schlafhorst AC08 Open End Spinning Frames from yesr 2011 and 2013 Prop 14461 – Schlafhorst ACO288 Open End Spinning Frames from year 1993 and 1994 Prop 14399 – Zinser 351 ring spinning frames 1488 spindles each from year 2003 and 2004 Prop 14939 – Toyoda RX100 ring spinning frames 960 spindles from Year 1990 Prop 5488 - Marzoli Ring Spinning 1008 spindles with Lycra creel from year 1990 and 2001 Prop 5918 – Trutzschler TC03 cards from year 2008 Prop 14939 – Trutzschler DK740 cards from year 1990 Prop 14939 – Trutzschler DK760 cards from year 1993 Prop 14939 – Hara Cherry Draw Frames DYH500, D600 and DX800 from 1990 to 1996 Prop 14045 – Rieter Draw frames SB951 and RSB 951 from 1995 Prop 14939 – Rieter SB-D10 and RSB D30 Draw Frames from 1997 Prop 13434 – Hara Cherry Combers from Year 1992 Prop 14399 – Vouk Combers and Lappers from year 1996 Prop 13256 – Barmag filament Take up winders from year 1991 Prop 13845 – Hills Bi-Component fiber spinning line from year 2001 – never installed – NEW Prop 5787 - Rieter J20 Air Jet Spinners from year 2012 Prop 14046 - Murata MJS802HR Air Jet Spinners from year 1999 Prop 14371 – Murata MVS Vortex Air Jet spinners from year 2005

Weaving:Weaving:Weaving:Weaving: Prop 5488 – Master / Mayer Indigo Denim Slasher Dye Range from year 2002 Prop 5727 - Muller 6 space and 4 space Tape looms from year 1998 Prop 12900 – Benninger Ben-Direct Warper and creel from year 2001 Prop 14046 – Toyoda JAT610 Air Jet Looms 250cm with side tuckers from year 1994 Prop 14046 – Tsudakoma ZA205 Air Jet Looms 330cm with side tuckers from year 1989 Prop 13813 – Tsudakoma ZAX Air Jet looms 330cm from year 1996 Prop 14182 – Tsudakoma ZAX Air Jet looms 190cm with Cam from year 1994 Prop 15016 – Somet Super Excell 320cm jacquard looms from year 2004 Prop 14524 – Picanol GTX Rapier 190cm Jacquard looms from year 1998 and 1996 Prop 13815 – Picanol Omni Air Jet 340cm jacquard looms from 1996 and 1997 Prop 5740 - Rostoni Serctional Warper 340cm and creels from year 2001 Prop 13435 – Kaji cone to cone Sizing winder from year 2001 Prop 14431 – Tsudakoma Water Jet Looms with Dobby 210cm from Year 1998 Prop 14431 – Tsudakoma Single End Filament Sizing installation from year 1998





30

Prop 14045 – Sucker Mueller of Brasil Warping and Sizing Installation from 1994

FinishFinishFinishFinishing:ing:ing:ing: Prop 13104 – TubeTex pad lines, Compactors & Osthoff singers from year 1998 Prop 4845 - Sucker Muller Tandem Shearing 210cm from Year 2001 Prop 14805 – Benninger Mercerising 180cm from year 2007 Prop 14613 – Stork Rotary printer 240cm from year 2012 Prop 12521 – Barudan, Texpa, Jet Sew, Juki – automatic Hemming and stitching machinery

Knitting:Knitting:Knitting:Knitting: Prop 15005 – Mayer & Cie Circular knitting machines Prop 15006 – Karl Mayer Lace warp knittying machines Prop 15007 – Karl Mayer Tricot and Raschel Warp Knitting machines

Non Woven:Non Woven:Non Woven:Non Woven: Prop 14863 – Zimmer Thermobonding line friom year 2012 Prop 13911 – Fehrer Geo Textile line 6.7 meter from year 1994 Prop 5369 - Dilo Geo Textile Line 5.6 meter from year 2006 Prop 13524 – ICBT Perfo Jet Spun Lace Line 4.88 meter from year 1999 ab-rg

ur Ref: B29 7468

3333 PICANOLPICANOLPICANOLPICANOL AIR JET TERRY LOOMS,TYPE TERRY PLUSAIR JET TERRY LOOMS,TYPE TERRY PLUSAIR JET TERRY LOOMS,TYPE TERRY PLUSAIR JET TERRY LOOMS,TYPE TERRY PLUS

(2 dobby and 1 jacquard)(2 dobby and 1 jacquard)(2 dobby and 1 jacquard)(2 dobby and 1 jacquard)

(our ref B29 7468)(our ref B29 7468)(our ref B29 7468)(our ref B29 7468)

PICANOLPICANOLPICANOLPICANOL AIR JET TERRY LOOM, 2005AIR JET TERRY LOOM, 2005AIR JET TERRY LOOM, 2005AIR JET TERRY LOOM, 2005

Type TERRY PLUS 800-6-R

Reed space 260cm

6 colours, 6 Picanol 1131 CAN Plus weft accumulators

Staubli dobby type 2861-16K for 16 shafts

14 shafts provided – DRC30 drive harness connection

ELSY electronic selvedge system

PFT (Programmable filling tensioner) and PSO (Pre-winder Swicth Off)

Ground warp beam 805mm dia

Pile warp beam 1000mm dia

1 ground warp beams 805mm, type190.

1 Pile warp beam

2 adapters

1 cloth roller

Approx.. 5000 droppers,5000 heald wires





31

380v, 50Hz


Type TERRY PLUS 800-6-R

Reed space 230cm

6 colours, 6 weft accumulators

Staubli dobby type 2861-16K for 16 shafts

14 shafts provided – DRC drive harness connection


PFT (Programmable filling tensioner) and PSO (Pre-winder Switch Off)



1 ground warp beam 805mm, type190.

1 Pile warp beam

2 adapters

1 cloth roller

380v, 50Hz


Type TERRY PLUS 800-8-J

Reed space 260cm

6 colours, 6 weft accumulators

Staubli electronic jacquard type LX1602 for 3072 hooks and harness with springs and 5756

ends

Lietti Steel jacquard gantry


PFT (Programmable filling tensioner) and PSO (Pre-winder Switch Off)



1 Ground warp beam 805mm.Diam.

1 Pile warp beam 1000mm.Diam.

2 adapters for working from beams, type 190.

1 Cloth roller.

Approx. 5000 droppers

Your consideration and prompt response will be most appreciated.





32

Make your Donation toMake your Donation toMake your Donation toMake your Donation to " " " " Nur e Abed Nur e Abed Nur e Abed Nur e Abed Mohammadia Jamey mosqueMohammadia Jamey mosqueMohammadia Jamey mosqueMohammadia Jamey mosque" Dhanua, Sreepur, Gazipur" Dhanua, Sreepur, Gazipur" Dhanua, Sreepur, Gazipur" Dhanua, Sreepur, Gazipur----1740 1740 1740 1740 DBBL Mobile Bank A/C No. 01911133012DBBL Mobile Bank A/C No. 01911133012DBBL Mobile Bank A/C No. 01911133012DBBL Mobile Bank A/C No. 01911133012----1111

Best regards & Thanks.

======================

Md. Rafiqul Islam

Director Marketing

ABEDALI TEX

NT FASHION Reg. off.:17/e/3 Modhubag,Moghbazar, Ramna,

Dhaka-1217, Bangladesh Sales office: Ovijan # 48, Sortaranga Road,

Charagali Market, Tongi, Gazipur. Bangladesh

Phone+Fax:+88-02-9815329 Cell:=8801772916443 (Rana) E-mail: [email protected] www.abedalitex.yolasite.com Skype: makawsar01

N.Gonj off: 69 BB Road, Ukilpara.

Fax:02 764 4357, (USA-BANGLA Join Sourcing for your Require)

OUR SOURCING OFFICE , USA, GERMANY, ITALY, TURKEY, TAIWAN, INDIA, PAKISTAN, and

KOREA

equipment news letter - Yolaabedalitex.yolasite.com/resources/equipment news letter.pdf1...

Documents

Transcript of equipment news letter - Yolaabedalitex.yolasite.com/resources/equipment news letter.pdf1...