Equipment Development Company, Inc.summit-sales.com/catalogs/EDCO Pricelist 7-2012.pdf20086 CP405,...

PRICE LIST

Equipment Development Company, Inc.

Surface Preparation, Restoration & Professional Sawing Equipment

Other Gasoline Engine Models Available on Select Products - Call for Pricing.

Prices are based on US Dollars and Subject to ChangeVer.27-Rev.-7.12

Go to back cover for Electric Export Models.

Single-Disc Floor GrindersPart# DESCRIPTION MSRP50200 SEC 1.5HP-115v-60Hz $3,161

Dual-Disc Floor GrindersPart# DESCRIPTION50100 2EC 1.5HP-60HZ Electric $4,69150800 2EC, 3HP Baldor Single-Phase 60Hz $4,96751800 2GC 5.5HP Honda $5,05951400 2GC 11 HP Honda $5,81254800 2GCP 11HP Honda Propane $7,725

Four-Disc Floor GrindersPart# DESCRIPTION53600 4EC 5 Hp-1P-230V $8,78951500 4GC 11 Hp Honda $8,71654400 4GCP 11 Hp Honda Propane $10,393

Floor Grinder Start-Up PaksPart# DESCRIPTIONA101 Grinder Startup Pack 1 (6 DymaSerts (1X), 6 Cases, 9 Wedges) $1,205A102 Grinder Startup Pack 2 (6 DymaSerts (2X), 6 Cases, 9 Wedges) $1,205A103 Grinder Startup Pack 3 (3 DymaSerts (1X), 3 Cases, 6 Wedges) $605A107 Grinder Startup Pack 7 (3DymaSerts(2X), 3 Cases, 6 Wedges) $605A120 Grinder Startup Pack 9 (6 PCDymaSerts, 6 Cases, 9 Wedges) $1,205A121 Grinder Startup Pack 10 (3 PCDymaSerts, 3 Cases, 6 Wedges) $605A105 Grinder Startup Pack 5 (3 StripSerts w/Carbides & Wedges) $372A106 Grinder Startup Pack 6 (6 StripSerts w/Carbides & Wedges) $747A111 Tool Box Startup (6 DymaSerts (1X), 6 Cases, 9 Wedges, Tool Box, Punch,Hammer) $1,232A112 Tool Box Startup (6 DymaSerts (2X), 6 Cases, 9 Wedges, Tool Box, Punch,Hammer) $1,232A118 Tool Box Startup (6 DymaSerts (3X), 6 Cases, 9 Wedges, Tool Box, Punch,Hammer) $1,232A113 Tool Box Startup (3 DymaSerts (1X), 3 Cases, 6 Wedges, Tool Box, Punch,Hammer) $631A117 Tool Box Startup (3 DymaSerts (2X), 3 Cases, 6 Wedges, Tool Box, Punch,Hammer) $631A119 Tool Box Startup (3 DymaSerts (3X), 3 Cases, 6 Wedges, Tool Box, Punch,Hammer) $631A122 Tool Box Startup (6 PCDymaSerts, 6 Cases, 9 Wedges, Tool Box, Punch,Hammer) $1,232A123 Tool Box Startup (3 PCDymaSerts , 3 Cases, 6 Wedges, Tool Box, Punch,Hammer) $631A115 Tool Box Startup (3 StripSerts w/Carbides, Wedges, Tool Box, Punch, Hammer) $399A116 Tool Box Startup (6 StripSerts w/Carbides, Wedges, Tool Box, Punch, Hammer) $774

Floor Grinder AccessoriesPart# DESCRIPTION

EDP2PCD-30 PCDYMA-SERT, General Purpose $17719110 DYMA-SERT,1X, General Purpose $17719130 DYMA-SERT,2X, Medium Matrix $17719180 DYMA-SERT,3X, Hard Matrix $17719250 DYMA-SERT, 50 GRIT $17719260 DYMA-SERT, 80 GRIT $17719270 DYMA-SERT, 120 GRIT $17719290 DYMA-SERT, 240 GRIT $17719120 DYMA-SERT Holding Case $2812400 STRIP-SERT, $11112407 PRO TUNGSERT- pack of 6 $12911014 C10 Stone, COARSE $611074 C10S Stone,SUPER COARSE $611024 C24 Stone, MEDIUM $611034 C80 Stone, FINE $611084 C120 Stone, SUPER FINE $612160 CG225 WOOD WEDGE (EA) $0.2812114 CG221 HOLDING CASE $2212120 CG222 Scarifier Assembly $1812130 CG223 Scarifier Assembly-HD $2212170 WIRE BRUSH w/ WEDGE $377050 WT-1 WEIGHT TRAY (2EC/2GC) $6577049 WT-55 WEIGHT 55 LBS $10212004 Black Tool Box w/ Hammer & Punch $5412005 Red Tool Box w/ Hammer & Punch $5412001 Empty Black Tool Box $4412002 Empty Red Tool Box $44

Floor Grinder Accessories12003 Ball Pein Hammer $1512006 Punch $58888 Right Hand Multi-Accessory Disc $2009999 Left Hand Multi-Accessory Disc $20076040 11-P, 11" pad driver $12413013 11-A, 11" silabide pad $482222 Surfacer disc, Right hand assy $2993333 Surfacer disc, Left hand assy $29915138 Hour Meter, Inductive $76

Turbo GrindersPart# DESCRIPTION56600 TG-10 11Hp Honda, w/ disc $4,81356900 TG-10 5HP-1P-230V $4,56256800 TG-10 5HP-3P-230/460V $4,40456700 TG10 11Hp Propane $7,39657200 TMC-7 2Hp E 115v w/ 7" Dia Cupwheel $3,02057100 TMC-7 5.5Hp Honda w/ 7" Dia Cupwheel $3,020

T Turbo Grinder AccessoriesPart# DESCRIPTION86389 10" Multi-Accessory Disc $26372034 7" Multi-Accessory Disc $23272312 TMC-7, 7" Rigid-Head Assembly with complete round shroud $37372313 TMC-7, 7" Flex-Head Assembly with cropped shroud $37372040 SCARIFIER DISC ASSY. 7" $14686390 7" Velcro Pad Driver (for polishing) $258

863967" Edge Polishing Kit

(INCLUDES 7" – 50, 120, 220, 400, 800, 1800, 3500, Buffing GRIT V-HAR FELT POLISHING PADS, 7" Velcro Pad Driver) $917

86326LB TG-10 Morflex Coupler Assembly (less barings) $50386365K TG-10 Field Retrofit Leveling Kit $19215190 Choke Kit for 11HP Vertical Shaft Honda Engine $4372050 Replacement Carbides (15 Required) $972045 Spacers for 7" Scarifier Disc. Assembly (39 Required) $215138 Hour Meter, Inductive $76

T Turbo Grinder Diamond Tooling19166 10" - 20 Segmented Silver Economy Disc $51619167 10" - 10 Segmented Silver Economy Disc $25319161 10" White Disc-Abrasive Concrete $78019165 10" Green Disc-Green Concrete $78019164 10" Blue Disc- 80 Grit Fine Grinding $78072030 7"Diamond Cupwheel, dry $41172031 7"Diamond Cupwheel, 120 Grit $411

QC-PCD-1L Diamond PCD Accessory $115QC1B-SC-0030 30 - Grit Single Diamond Grinding Dot (Soft Concrete) $34QC1B-SC-0070 70 - Grit Single Diamond Grinding Dot (Soft Concrete) $34QC1B-SC-0120 120 - Grit Single Diamond Grinding Dot (Soft Concrete) $34QC1B-MC-0030 30 - Grit Single Diamond Grinding Dot (Medium Concrete) $34QC1B-MC-0070 70 - Grit Single Diamond Grinding Dot (Medium Concrete) $34QC1B-MC-0120 120 - Grit Single Diamond Grinding Dot (Medium Concrete) $34QC1B-HC-0030 30 - Grit Single Diamond Grinding Dot (Hard Concrete) $34QC1B-HC-0070 70 - Grit Single Diamond Grinding Dot (Hard Concrete) $34QC1B-HC-0120 120 - Grit Single Diamond Grinding Dot (Hard Concrete) $34QC2B-SC-0030 30 - Grit Double Diamond Grinding Dot (Soft Concrete) $60QC2B-SC-0070 70 - Grit Double Diamond Grinding Dot (Soft Concrete) $60QC2B-SC-0120 120 - Grit Double Diamond Grinding Dot (Soft Concrete) $60QC2B-MC-0030 30 - Grit Double Diamond Grinding Dot (Medium Concrete) $60QC2B-MC-0070 70 - Grit Double Diamond Grinding Dot (Medium Concrete) $60QC2B-MC-0120 120 - Grit Double Diamond Grinding Dot (Medium Concrete) $60QC2B-HC-0030 30 - Grit Double Diamond Grinding Dot (Hard Concrete) $60QC2B-HC-0070 70 - Grit Double Diamond Grinding Dot (Hard Concrete) $60QC2B-HC-0120 120 - Grit Double Diamond Grinding Dot (Hard Concrete) $60

Walk Behind ScarifiersPart# DESCRIPTION MSRP79300 CPM-8 9 HP Honda $4,57479500 CPM-8 5HP-1P-230V $4,32979400 CPM-8 5HP-3P-230/460V $3,90869300 CPL-8, 1.5HP Electric Scari-Lite Mini-Planer $2,96169500 CPL-8, 5.5HP Gasoline Scari-Lite Mini-Planer $2,96169100 CPM-10 13Hp Honda $5,21769200 CPM-10 7.5hp-3-230/460v $4,419

Self-Propelled ScarifiersPart# DESCRIPTION MSRP73500 CPU-10FC Gasoline, 13 HP Honda $9,92073400 CPU-10FC Gasoline, 20 HP Honda $12,84573600 CPU10-FC Electric, 10HP-3P 230/460 $11,66775700 CPU-12 Gasoline, 38HP Kohler $18,73675600 CPU-12 Electric, 15HP-3P-460V $24,022

Scarifier Start-Up PaksPart# DESCRIPTION MSRPA201 CPM-8 STARTUP PAK 1 (78 CP206-T, 215 Spacers, 6 Shafts) $804A202 CPM-8 STARTUP PAK 2 (150 JRS501, 175 Spacers, 6 Shafts) $284A209 CPM-8 Fine Setup (96 CP206-T, 174 Spacers, 6 Shafts) $1,027A211 CPM-8 Edger/CPM-4 Carbide Cutter Start-Up Pak (54 CP206T, 114 Spacers) $596A212 CPL Startup Pak (66 CP206T, 234 Spacers & 6 Shafts) $723A207 CPM-10 6 ShaftStartup Pak (102- 308T, 252 Spacers & 6 Shaft) $1,880A208 CPM-10 8 Shaft Startup Pak (152-206T, 384 Spacers & 8 Shafts) $1,691A210 CPU10FC Startup Pak-6 shaft (96 CP308-T, 240 Spacers, 6 Shafts, 12 Bushings) $1,851A206 CPU10FC Startup Pak-4 shaft (64 CP408-TV, 130 Spacers, 4 Shafts, 8 Bushings) $1,500A205 CPU-12 STARTUP PAK (100 CP408-TV, 300 Spacers, 6 Shafts, 12 Bushings) $2,319

Scarifier Cutters 2318.53Part# DESCRIPTION MSRP20156 CP206-T, 6 point tungsten carbide (CPM-8 & CPM-10, 8-Shaft) $912206 JRS-501, 2" 18 teeth pointed steel (CPM-8 & CPM-10, 8-Shaft) $220206 CP305, 2" 12 teeth flat tip steel (CPM-8 & CPM-10, 8-Shaft) $220336 CP207,Carbide Milling Cutter (CPM-8 & CPM-10, 8-Shaft) $6520326 CP308T, CUTTER , 2-1/4" CARBIDE (CPM-10 & CPU-10FC, 6-Shaft) $1820296 CP404-P6, CUTTER , Pointed Steel (CPM-10 & CPU-10FC, 6-Shaft) $320076 CP404, CUTTER, 2-3/8" Flat Steel (CPM-10 & CPU-10FC, 6-Shaft) $220136 CP408-TV, CUTTER, CARBIDE (CPU-10FC, 4-Shaft & CPU-12) $2320056 CP405P, CUTTER, 3" POINTED Steel (CPU-10FC, 4-Shaft & CPU-12) $220086 CP405, CUTTER, 3" Flat Steel (CPU-10FC, 4-Shaft & CPU-12) $320316 12pt. Carbide Cutter (CPU-10FC, 4-Shaft & CPU-12) $27

Scarifier Accessories65080 CPM-8 & CPM-10 Water System Kit (Dust Control Water Mist Kit) $7064450 CPU-10FC Outrigger Wheel Assembly $344

65050C CPM-8 drum w/ 78 carbide and 204 spacers $1,36665050 CPM-8 drum only, Includes 6 shafts $61065027 EDGER ASSY for CPM-8 $370

C66040 Drum-4, use with edger,Includes 6 shafts $46620150 CP407 Shafts, use on CPM8, 8-9/16" x 1/2" $10

C66043 CP410 Shafts, use on CPM-4, 5-3/16" x 1/2" $1112230 CG227, steel spacers $0.35

Scarifier Accessories65270 CPM-10 Six Shaft drum $68065280 CPM-10 8 Shaft drum $69164420 CPU-10FC, 4-Shaft Drum $59864430 CPU-10FC, 6-Shaft Drum $59861232 CPU-12, 6-Shaft Drum $93520170 CPM-10 (6 Shaft) Shaft $1520180 CPM-10 (8 Shaft) Shaft $1120120 CPU10FC Shaft, 11-3/8", 10" drum $1420010 CPU-12 Shaft, 13-5/8" shaft for use on 12" drum $1820060 CP403, SPACER 1-1/2OD X 3/4ID $0.3584063 CP403, Bushing, 3/4" ID $864440 CPU-10FC Diamond Grooving Head $59839807 8" x .90 x 1.5 Diamond Blade $19539810 8" x .250 x 1.5 Diamond Blade $56864308 1" Spacer $3764307 1/2" Spacer $2915138 Hour Meter, Inductive $76

Traffic Line Remover & CuttersPart# DESCRIPTION MSRP77500 TLR-7 11HP Honda w/ TR3-24 $7,99226010 TR3-24 (Set of 3) $78626020 TR3-48 (Set of 3) $896

Scabblers & AccessoriesPart# DESCRIPTION MSRP63100 CD-5 CHIP-DEK, 5-HEAD w/ 5 - 5pt Bit $10,08163200 CD-3 CHIP DEK 3 HEAD w/ 3 - 5pt Bit $6,17018810 5-POINT CARBIDE, CD-5 $12218820 9-POINT CARBIDE, CD-5 $14363220 Bit Removal Tool $78

Dust Collection Vacuum SystemsPart# DESCRIPTION MSRP

ED33125K Vortex-200 (Electric Dry VAC-200) $3,188ED33127K Vortex-200 w/HEPA Filter $3,940ED33230K Vortex-290 (Electric Dry VAC-290) $4,856ED33280K Vortex-290 w/HEPA Filter $5,554ED33725K Vortex-300 (Gasoline Dry VAC-300) $11,537ED337240K Vortex - 180 (Gasoline Dry VAC-180) $11,003

Vacuum System AccessorieesPart# DESCRIPTION MSRP

ED5003K 2" PRO Wand Floor Tool $612ED5004K 2" Wand Floor Tool $278ED5018 32" Floor Sweep Attachment for Vortex-200 $494ED7004 32" Floor Sweep Attachment for Vortex-290 $535

ED90121-BL 2" Y-Adapter (2" to Two 1-1/2" ports) $102ED90132-BL 3" Y-Adapter (3" to Two 2" ports) $338

15153 3" to 2" Cuff Adapter $52ED35192 Vortex-200 HEPA Module $1,516ED35211 Vortex-200 HEPA Filter $740ED20091 Vortex-200 Replacement Filter (13 sq. ft. surf. area) $288ED30091 Vortex-290 Replacement Filter (28 sq. ft. surf. area) $434

Industrial Cleaning 98300 27" High-Speed Propane Burnisher $5,69898400 20" Automatic ProScrubber $4,866

Floor Stripper & AccessoriesPart# DESCRIPTION MSRP94400 TS-8 Tile Shark 3/4Hp-115v $1,62128030 8" Flex scraper Blade, pack of 5 $4628040 8" Rigid Scraper Blade, pack of 5 $4428050 8" Slicer Scraper Blade, pack of 5 $10928060 12" Foam Rubber Backing Blade, pack of 5 $58

Big Stick Chisel Scaler & AccessoriesPart# DESCRIPTION MSRP27200 Straight Big Stick, includes one 3" chisel $1,66827100 ALR-BS Big Stick, includes one 3" chisel $1,66827031 BS-2 , 2" Single bevel $7827033 BS-3 , 3"Singel bevel $7827034 BS-3M, 3" milled chisel for scapers $10427035 BS-6S, Scraper blades, 6" (pkg of 5) $13727037 BS-MPT, chipping point $64

ALR Chisel ScalersC10342 ALR-E, Ergonommic, w/ 4" chisel (18 lbs.) $1,056C10301 ALR-5 , 5 ft., steel, w/ 4" chisel (16 lbs.) $960C10308 ALR-4, 4 ft.,steel, w/ 4" chisel (12.5 lbs.) $934C10309 ALR-2, 2 ft., steel, w/ 4" chisel (9 lbs.) $895

C10301A ALR-5A, 5 ft. alum, w/ 4" chisel (8 lbs. 9oz) $983C10308A ALR-4A, 4 ft. alum, w/ 4" chisel (6 lbs. 13oz) $983C10309A ALR-2A, 2 ft. alum, w/ 4" chisel (5 lbs. 13oz) $932

ALR Chisel Scaler AccessoriesPart# DESCRIPTION MSRP

C10302 LR-4 CHISEL, 4" STEEL $60C10303 LR-2 CHISEL, 2" STEEL $60C10324 LR-1 CHISEL, 1-1/4" STEEL $60C10306 LR-4M Chisel, Adapter $85C10329 LR-4S 4" Scraper Blades (5 PACK) $59C10304 LR-8 8" Scraper Blades (5 PACK) $59C10305 LR-12 12" Scraper Blades (5 PACK) $83C10327 LR-MPT Chipping Point $48C10320 LR-JS, Joint Cleaner, Curved 7/16" width $137C10353 LR-JM, Joint Cleaner, curved 5/8" width $166C10354 LR-JW, Joint Cleaner, curved 7/8" width $159C10348 LR-CH, Compaction Head, Asphalt Tamper $105C10339 LR-SCR CHISEL, SHINGLE REMOVAL $217C10323 LR-SR SHINGLE REMOVER BLADES 8" (5 PACK) $64C10312 LRS-5 Scabbler Head, 5-POINT FOR ALR $148C10310 LRS-H Scabbler Head Stem for ALR $45C10336 LR-TB, Bushing Head $99C10315 LR-2-45, Chisel, 2" Forge Steel, 45º $64C10316 LR-2-45M, Chisel, 2" Milled Steel, 45º $85C10322 Scraper Blades, 4" (pkg of 5) use LR-2-45M $46C10330 ALR ACCESSORY PACKAGE: Includes display stand,1" chisel, 2" chisel, two 4" milled chisels, plus one package of 4" and 8" scraper blades $579C10341 ALR Starter Package (NO STAND): Includes 1" chisel, 2" chisel, two 4" milled chisels, plus on package each of 4" and 8" scraper blades $40027060 ALR Big Stick Accessory Package: Includes 2" Chisel, 3" Chisel, Two-3" Milled Chisels, One-5 pack of 6" Scraper Blades and a Chipping Point $43927075 DISPLAY STAND FOR ALR ACCESSORIES $179

24" - 46" Concrete Power TrowelsPart# DESCRIPTION85400 T244B-4H, Gasoline, 24" dia., 4.0 Honda $2,70785500 T304B-5.5H, Gasoline, 30" dia., 5.5 HP Honda $2,87985100 T364B-5.5H, 36" dia., 5.5 HP, Honda $2,94981300 T364, Electric, 36" dia., 3 HP Leeson $3,19885200 T464B-9H, Gasoline, 46" dia., 9 HP Honda $3,43581200 T464-3B, Electric, 46" dia., 3 HP Baldor $3,427

Concrete Power Trowel AccessoriesPart# DESCRIPTION MSRP40197 36" Power Trowel Snap-On Blade Adapter "A" $1840237 46" Power Trowel Snap-On Blade Adapter "B" $2981400 TAT-II, Tote-A-Trowel, 30" - 46" Trowels $118

C84001 PT Work Light $143C84004 LEV-L-IT, Optional Lev-L-IT Systems $28740710 36" Float Pan $338

Concrete Power Trowel BladesPart# DESCRIPTION MSRP40470 C-4, 24" dia., Combo blade, bolt on only $1440490 M-4, 24" dia., Float bladebolt on only $14

40270 C-2, Combo blade, 8" x 11", EDCO $1640270-C C-2C, Combo blade, 8" x 11", Conventional $1940280 F-2, Finish blade, 6" x 11", EDCO $14

40280-C F-2C, Finish blade, 6" x 11", Conventional $1540290 M-2, Float blade, 9" x 11", EDCO $15

40290-C M-2C, Float blade, 9" x 11", Conventional $19

40040 C-1, Combo blade, 8" x 14", EDCO Model $1640040-C C-1C, Combo blade, 8" x 14", Conventional $2240050 F-1, Finish blades, 6" x 14", EDCO $14

40050-C F-1C, Finish blades, 6" x 14", Conventional $1540060 M-1, Float blade, 9" x 14", EDCO $15


40070 C-3, Combo blade, 8" x 18", EDCO $2040070-C C-3C, Combo blade, 8" x 18", Conventional $2440080 F-3, Finish blade, 6" x 18", EDCO $18

40080-C F-3C, Finish blade, 6" x 18", Conventional $1640090 M-3, Float blade, 9" x 18", EDCO $19


28" Thru 30" Diameter (Use "A" Adapter)

34" Thru 42" (use "A" Adapter)

44" Thru 48" (use "B" Adapter)

Variable & Reduced Speed Epoxy Mortar Power TrowelsPart# DESCRIPTION MSRP

C84400 T244-VS 24" Variable Speed 2 HP E $4,08785600 T-244B-RS-4H, RedSpd., 24" dia., Honda $3,352

C84100 T304-VS 30" Variable Speed 2 HP E $5,063C85100 T304-RS , 30" Reduced Speed 2 HP Electric $3,63885700 T304B-RS-5.5H, RedSpd. 5.5 HP Honda $3,561

C84200 T364-VS 36" Variable Speed 2 HP E $5,247C85200 T364RS, 36" Reduced Speed 2 HP Electric $3,70085800 T364B-RS-5.5H, RedSpd., 36"dia., 5.5H Honda $3,63385900 T364B-RS-9H, RedSpd., 36" dia., 9 HP Honda $4,238

C85300 T464RS, 46" Reduced Speed 3.0 HP Electric $4,07586100 T464B-RS-9H, RedSpd, 46" dia., 9 HP Honda $4,411

Variable Speed Power Trowel AccessoriesPart# DESCRIPTION MSRP81400 TAT-II, Tote-A-Trowel Transport $118

C84004 EDCO Lev-L-It System $287C84001 Light (Lamp Kit) $143

Variable Speed Power Trowel BladesPart# DESCRIPTION MSRP40270 C-2, 8" x 11", Combo blade for 30" $1640040 C-1, 8" x 14", Combo blade for 36" $1640220 C-2-SS, 8" x 11",stainless steel,combo $3940210 C-1-SS, 8" x 14",stainless steel,combo $43

C84040 C-2-PL, 8" x 11", plastic blade,non-steaking $65C84050 C-1-PL, 8" x 14", plastic blade,non-streaking $6640520 C-4SS, 24" dia., Stainless Steel Combo Blade $37

Epoxy Screed BoxesPart# DESCRIPTION MSRP

C90300 30" Screed Box, 1.9 cu/ft capacity $524C90400 36" Screed Box, 2.2 cu/ft capacity $545

Concrete & Asphalt Walk-Behind SawsPart# DESCRIPTION MSRP

45400D SK14 9 HP Honda, wgt.173 lbs $2,20045600D SK14 11HP Honda, wgt.173 lbs $2,20048100D SK14 13HP Honda, wgt.173 lbs $2,20047200 ASB-14 5HP AIR MOTOR, wgt. 160 lbs. $3,03742500 SB14 11 HP Honda, wgt.200 lbs. $3,71048200 SB14 13 HP Honda, wgt.200 lbs. $3,74342600 SB14E 5HP-1P-60Hz, Electric, 180 lbs. $3,49637100 DS-18 13 HP Honda $2,73137300 DS-18 5HP-1P-60Hz, Electric $2,731

Walk-Behind Saw Accessories52075 WATER TANK ASSY. OPTION, SK-14 $34850445 Replacement ARBOR WRENCH $2256310 Water tank for SDS-18 $19570075 SB-804, 8" x 1" .020 carbon wire wheel $5570095 SB-124, 12" x 1" .035 Wire wheel $13681030 Upcut SB-14 Saw - VAC Port Blade Guard $37852130 Upcut SK-10 Saw - VAC Port Blade Guard $16015138 Hour Meter, Inductive $76

Crack Chasing SawPart# DESCRIPTION MSRP49100 C-10 9 HP w/ 8 x .375 Dia. Blade $4,10749500 C-10 11 HP w/ 8 x .375 Dia Blade $4,30249600 C-10 13 HP w/ 8 x .375 Dia Blade $4,38849700 C-10 5Hp-single-230 V $3,854

Crack Chasing Saw AccessoriesPart# DESCRIPTION MSRP49015 Wheel Kit for C-10 $89

CC0837P3 8X.375X1" DIA. BLADE-CURED $265CC0850P3 8X.500X1" DIA. BLADE-CURED $315

Concrete & Asphalt Self-Propelled SawsPart# DESCRIPTION MSRP32800 SS-20-13 Gasoline,13 HP Honda $5,70932600 SS-20 Gasoline, 20 HP Honda $6,59134600 SS-20 Propane, 25 HP Kohler $10,70533200 SS-20, Electric,7.5 HP, 3-Phase, 230/460v $5,92533100 SS-20, Electric,10 HP, 3-Phase, 230/460v $6,10938100 SS-24-24 Gasoline, 24 HP Honda $8,70431400 SS-26 Gasoline, 38 HP Kohler $13,22934300 SS-26 Electric, 15Hp 3-Phase, 230/460 $14,38634400 SS-26 Diesel, 31Hp Deutz $25,601

Water Tank TrailersPart# DESCRIPTION MSRP39400 WT300 WATER TANK TRAILER $11,458

14" & 20" Masonry SawsPart# DESCRIPTION MSRP22300 BB-14 Electric, 1.5 HP-1P-60Hz 115/230 V $1,90126300 BB-14 Gasoline, 5.5HP HONDA $2,94526400 BB-14 Gasoline, 6.5HP HONDA $3,06726500 BB-14 Gasoline, 9HP HONDA $3,52322500 GMS20 9 HP Honda $4,83821100 GMS20 11 HP Honda $5,10727700 GMS20 13 HP Honda $5,242

27700ES GMS20 13HP Electric Start 12V $5,69721200 MS20 5HP-1P-60Hz, ELECTRIC $4,68521300 MS20 7.5HP-3P-60Hz,ELECTRIC $4,815

14" & 20" Masonry Saw Accessories $4,815Part# DESCRIPTION MSRP40632 Foot Pedal Kit for BB-14 $14340631 UNIVERSAL FOLDING STAND FOR 14" Masonry Saws $30624950 UNIVERSAL PROCART FOR 14" Masonry Saws $68640091 14" Masonry Tote-A-Saw Kit $80

Concrete Core Drill Rigs - Base MountedPart# DESCRIPTION MSRP

97200EV 36", 15-amp Base Mounted Core Drill Rig with Vacuum Pump $3,03997220EV 36", 20-amp Base Mounted Core Drill Rig with Vacuum Pump $3,09297200E 36", 15-amp Base Mounted Core Drill Rig - NO Vacuum Pump $2,53097220E 36", 20-amp Base Mounted Core Drill Rig - NO Vacuum Pump $2,583

97100EV 48", 20-amp Base Mounted Core Drill Rig with Vacuum Pump $3,27497100E 48", 20-amp Base Mounted Core Drill Rig - NO Vacuum Pump $2,69097042 36" Core Rig Pump Kit $57797043 48" Core Rig Pump Kit w/ Water Separator $65197062 Shear Pin (Core Rig) $6

Must specify blade guard size (14" to 30") Call for price quote - Standard is 26" - Prices subject to change due to engine cost fluctuation

Hand Held Tools97301 1-Speed Hand Held Core Drill Rig - 15amp $1,21097303 3-Speed Hand Held Core Drill Rig - 18 amp $1,51997311 Upright - Hand Held Drill Stand $70097312 Tilting - Hand Held Drill Stand $79897320 16" Hand Held Saw $1,545

EDC504954 Flush Cut Kit - 16" Hand Held Saw $319CFC1612 Flush Cut Blade - 16" Hand Held Saw $664

Hardscape/Paver SawsPart# DESCRIPTION MSRP24600 GMS-10, 4HP Honda w/ 10" Blade $2,64824700 GMS-10, 5.5 HP Honda w/ 10" Blade $2,75626100 GMS-10, Electric, 1.5 HP w/ 10" Blade $2,63024800 HSS-14, 5.5 HP Honda w 14" Blade $3,19225800 HSS-14, 6.5 HP Honda, w/ 14" Blade $3,32826200 HSS-14-E, 1.5 HP w/ 14" Blade $2,996

Hardscape/Paver Saw Accessories & BladesPart# DESCRIPTION MSRP24150 Upright Stand $10424650 Cart, Low Profile, GMS-10 Only $23924750 ProCart, GMS-10 & HSS-14 $686

Tile SawPart# DESCRIPTION MSRP24100 TMS-10, Electric Tile Saw, 10", 1 HP $1,84824200 TMS-10, Electric Tile Saw, 10", 1 1/2 HP $1,932

Tile Saw AccessoriesPart# DESCRIPTION MSRP24150 Portable Stand $10442149 Tile Accessory Package (Incl 90º Protractor,45º Angle & 45º Miter) $8842150 90º Protractor Guide $3542153 Dual 45º Angle Guide $2642160 Straight Cut Guide $1642155 45º Miter Guide $26

Digi-Matic Diamond Blade GaugePart# DESCRIPTION MSRP30008 DGM-3, 24" Diam. Blade & Core Bit $42030017 DGM-3, 36" Diam. Blade & Core Bit $48130007 DGM24 "DIGI-MATIC" Blade Gauge $42030016 DGM-36,Diamond Blades Only $481

Electric Grinder Export Machine ModelsPart# DESCRIPTION MSRP52500 SEC, Electric Single-Disc Grinder, 2HP Baldor, 220V Single-Phase 50Hz $3,16151300 2EC, Electric Dual-Disc Grinder, 2HP Baldor, 220V Single-Phase 50H $4,691

52800-50 4EC, Eletric Four-Disc Grinder, 5HP Baldor, 220/380/440V 3-Phase 50Hz $8,04457500 TMC-7, 7" Elec. Turbo Edge Grinder, 2HP Baldor, 220V 50Hz $3,048

56800-50 TG-10, 10" Turbo Grinder, 5HP Baldor, 220/380/440V 3-Phase 50Hz $4,212Electric Scarifier Export Machine Models

Part# DESCRIPTION MSRP70650 CPM-4, 4" Electric Scarifier, 2HP Baldor, 220V Single-Phase 50Hz $4,008

79400-50 CPM-8, 8" Walk Behind Scarifier, 5HP Baldor, 220/380/440V 3-Phase 50Hz $3,73269400 CPL-8, 8" Scari-Lite Mini-Planer, 1.75 HP, Single-Phase 50HZ $2,961

69200-50 CPM-10, 10" Walk Behind Scarifier, 7.5HP Baldor, 220/380/440V 3-Phase 50Hz $4,41973600-50 CPU-10FC, 10" Self-Prop. Scarifier, 10HP Baldor, 380/440V 3-Phase 50Hz $11,66775600-50 CPU-12, 12" Self-Propelled, Scarifier, 15HP Leeson, 380/440V 3-Phase 50Hz $24,024

Electric Floor Stripper Export Machine ModelsPart# DESCRIPTION MSRP94500 TS-8, Electric Floor Stripper, 3/4HP Leeson, 110/220V Single-Phase 50Hz $1,621

Electric Power Trowel Export Machine Models84650 T244, 24" Electric Power Trowel, 2HP Baldor, 110/220V Single-Phase 50Hz $3,15480450 T304, 30" Electric Power Trowel, 2HP Baldor, 110/220V Single-Phase 50Hz $3,72480850 T364, 36" Elec. Power Trowel, 2HP Baldor, 110/220V Single-Phase 50Hz $3,757

82600-50 T464, 46" Elec. Power Trowel, 3HP Baldor, 220/380/440V 3-Phase 50Hz $3,900Electric Walk Behind Saw Export Machine Models

Part# DESCRIPTION MSRP37400-50 DS-18, 18" Walk Behind Saw, 5HP Baldor, 220/380/440V 3-Phase 50Hz $2,73149400-50 C-10, 8" Crack Chasing Saw, 5HP Baldor, 200/380/440V 3-Phase 50Hz $3,854

Electric Self-Propelled Saw Export Machine ModelsPart# DESCRIPTION MSRP

33200-50 SS-20, 20" Self-Propelled Saw, 7.5HP Baldor, 220/380/440V 3-Phase 50Hz $5,92533100-50 SS-20, 20" Self-Propelled Saw, 10HP Baldor, 380/440V 3-Phase 50Hz $6,109

Electric Masonry Saw Export Machine ModelsPart# DESCRIPTION MSRP20900 BB-14, 14" Elec. Masonry Saw, 2HP Baldor, 110/220V Single-Phase 50Hz $2,184

21500-50 MS-20, 20" Elec. Masonry Saw, 5HP Baldor, 220/380/440V 3-Phase 50HZ $3,513Electric Tile & Hardscape Saw Export Machine Models

Part# DESCRIPTION MSRP24200-50 TMS-10, 1.5HP Electric Tile Saw, 230V, 50Hz $2,327

26150 GMS-10, 10" Hardscape Saw, 2HP Baldor, 110/220V Single-Phase 50Hz $2,63026250 HSS-14, 14" Hardscape Saw, 2HP Baldor, 110/220V Single-Phase 50Hz $2,996

Dust Collection Vacuum SystemPart# DESCRIPTION MSRP

ED33125-220K Vortex-200 (Electric Dry VAC-200) 220V 50Hz $4,162Digi-Matic Diamond Blade Gauge

Part# DESCRIPTION MSRP30028 Digi-Matic, 900mm Diam. Blade only Gauge $48130026 Digi-Matic, 600mm Diam. Blade & Core Bit Gauge $420

Electric Export Machine PricingPrices based on US Dollars

CONCRETE POLISHING SYSTEMSPart # DESCRIPTION PRICE

53901ProPolisher II System

(Includes 2DP, Prep Kit, Honing Kit. Polish Kit, Applicator Mop & Training DVD) $10,595

CONCRETE POLISHING MACHINESPart # DESCRIPTION PRICE

53900 2DP-5B/230/1 CONTRX 2-DISC POLISHER $8,861

53900P 2DP-16HP/1 CONTRX 2-DISC PROPANE POLISHER $10,264

58700 EP7-2HP ELEC. CONTRX PROPOLISH 7" EDGER $2,962

58800 EP7-5.5HP GAS. CONTRX PROPOLISH 7" EDGER $2,962

VACUUM SYSTEMS & PRE-SEPARATORSPart # DESCRIPTION PRICE

ED33125K VORTEX 200 ELEC. DRY VACUUUM SYSTEM $3,095

ED33230K VORTEX 290 ELEC. DRY VACUUM SYSTEM $4,715

ED33725K VORTEX 300 GASOLINE DRY VACUUM SYSTEM $11,537

ED337240K VORTEX 180 GASOLINE VACUUM SYSTEM $11,003

ED5003K 2" PRO Vac Wand Floor Tool Accessory $612

ED5004K 2" Vac Wand Floor Tool Accessory $278

97108 HEC-8 SEPARATOR, 8-GALLON $3,331

97109 HEC-12 SEPARATOR, 12-GALLON $5,371

PREPARATION & POLISHING ACCESSORY KITSPart # DESCRIPTION PRICE

53902PREPARATION KIT

(INCLUDES – 30, 70, 120 GRIT MEDIUM GRINDING DOTS & MAGNETIC QC HOLDER) $1,493

53903HONING KIT

(INCLUDES 4" – 50, 100, 200 GRIT RESIN BOND DISCS & 4" QC VELCRO PAD ADAPTER) $1,620

53904POLISHING KIT

(INCLUDES – 400, 800, 1800, 3500, Buffing GRIT V-HAR FELT POLISHING PADS) $2,101

863957" EDGE PREPARATION KIT

(INCLUDES 7" – 30, 70, 120 GRIT MEDIUM GRINDING DOTS sets of 3) $513

863967" EDGE POLISHING KIT

(INCLUDES 7" – 50, 120, 220, 400, 800, 1800, 3500, Buffing GRIT V-HAR FELT POLISHING PADS, 7" Velcro Pad Driver) $917

QUICK-CHANGE DOTS PREPARATION ACCESSORIESPart # DESCRIPTION PRICE

QC-PCD-1 Diamond PCD Accessory $115

QC2B-MC-0030 30-GRIT-MEDIUM - GRINDING DOT $60



QC2B-SC-0030 30-GRIT-SOFT - GRINDING DOT $60



QC2B-HC-0030 30-GRIT-HARD - GRINDING DOT $60



4" RESIN BOND DISCS - HONING ACCESSORIESPart# DESCRIPTION PRICE

SA-4-0050 50-GRIT RESIN BOND DIAMOND DISC $66



4" V-HARR FELT PADS - POLISHING ACCESSORIESPart# DESCRIPTION PRICE

VF-4-0400 400-GRIT V-HARR FELT POLISHING PAD $70




VF-4-buff BUFFING V-HARR FELT POLISHING PAD $70

CONCRETE POLISHING

7" V-HARR FELT PADS - POLISHING ACCESSORIESPart # DESCRIPTION PRICE








VF-7-buff BUFFING V-HARR FELT POLISHING PAD $82QUICK-CHANGE ACCESSORY HOLDERS

Part # DESCRIPTION PRICE

QC-Holder-EDCO MAGNETIC QUICK-CHANGE HOLDER $82

QC-AD-4-EDCO 4" QUICK-CHANGE VELCRO PAD ADAPTER $62

86390 7" VELCRO PAD DRIVER $258

72034 7" MULTI-ACCESSORY DISC $232

DENSIFIER & APPLICATORS KITPart # DESCRIPTION PRICE

13501 LS DENSIFIER, 5 GAL. BUCKET $479

13504 LS Guard, 1 GAL. $469

13515 MOP W/ PAD, 16" MICROFIBER $48

13516 MOP REPLACEMENT PAD, 16" MICROFIBER $26

MISCELLANEOUS POLISHING ACCESSORIESPart # DESCRIPTION PRICE

72312C HEAD ASSY.W/COVER & CUPWHEEL, RIGID $562

DTSBBP7-F 7" PAD DRIVER FLEXIBLE 5/8-11 $60

DTSCW7-18-C 7" GRINDER CUP WHEEL COURSE 5/8-11 $216

DTSCW7-18-M 7" GRINDER CUP WHEEL MEDIUM 5/8-11 $216

HARDSCAPE SAWSPart # DESCRIPTION PRICE

28300 HSS10-4.5S CONTRX HARDSCAPE SAW $2,570

28400 HSS10-4H CONTRX HARDSCAPE SAW $2,627

28500 HSS14-6S CONTRX 14" HARDSCAPE SAW $3,231

28600 HSS14-5.5H CONTRX 14" HARDSCAPE SAW $3,289

28700 HSS22-14S CONTRX HARDSCAPE SAW $3,658

28800 HSS10-1.5B CONTRX 10"HARDSCAPE SAW $2,628

28900 HSS14-1.5B CONTRX 14" HARDSCAPE SAW $2,996

29200 HSS14-6.5H CONTRX 14" HARDSCAPE SAW $3,289

HARDSCAPE ACCESSORIESPart # DESCRIPTION PRICE

24150C UPRIGHTSTAND FOR CONTRX HSS-10/14 $104

24750C PROCART FOR CONTRX HSS-10/14 $641

28750 UPRIGHT STAND FOR CONTRX HSS22 $307

28725 PORTABLE PNEUMATIC-WHEELED CART FOR HSS22 $327

Equipment Development Company, Inc.summit-sales.com/catalogs/EDCO Pricelist 7-2012.pdf20086 CP405,...

Documents

Transcript of Equipment Development Company, Inc.summit-sales.com/catalogs/EDCO Pricelist 7-2012.pdf20086 CP405,...