EQUIPMENT CALIBRATION - DevonWay … · Save Print M&TE DevonWay Calipers Status: In Service |...
4
1 EQUIPMENT CALIBRATION Ensure Accuracy Properly calibrated tools are necessary for validating that assets are operating within acceptable ranges – especially in regulated environments. The DevonWay Equipment Calibration solution ensures that measurement and test equipment (M&TE) used by energy, oil, gas, biotech, construction, research, manufacturing, and other businesses are accurate and traceable to National Institute of Standards and Technology (NIST) requirements. In addition to managing calibration data and schedules, the Equipment Calibration solution also manages the repair process for out-of-tolerance instruments.
Transcript of EQUIPMENT CALIBRATION - DevonWay … · Save Print M&TE DevonWay Calipers Status: In Service |...
1
EQUIPMENT CALIBRATION
Ensure Accuracy
Properly calibrated tools are necessary for validating that assets are operating within acceptable ranges – especially in regulated environments. The DevonWay Equipment Calibration solution ensures that measurement and test equipment (M&TE) used by energy, oil, gas, biotech, construction, research, manufacturing, and other businesses are accurate and traceable to National Institute of Standards and Technology (NIST) requirements. In addition to managing calibration data and schedules, the Equipment Calibration solution also manages the repair process for out-of-tolerance instruments.
2
-Search All- Search DevonWay (Ctrl + Shift + E) Config Build
Home
TroubleshootingReference Documents
ASSET 2020-0013 X
Options
Options
Info:
Calibration:
Asset Stats:
Activity Log:
Transfer
CalibrateRequest Repair Retired
Calipers
Assigned to: Zack Johnson Owning Organization: Asset Management & Engineering
SLC Shop In Service :
Date Purchased:
Location:
Spare :
Bill Ewer
Wade Watts
Supervisor:
Manager:
Settings:
Days in Service : Cost of Repairs (parts) :
Cost of Repairs (labor hrs) :
Cost of Repairs (vendor) :
Cost of Purchase:
Accrued Cost of Asset:
Number of Repairs:
Days not in Service :
Last Calibrated (days): 0
0
0
0
$200.00 & 0 labor hours
$200.00
Last Completed Calibration: Next Calibration Due:03/03/20
03/03/20
03/03/20
06/01/20
Comments:
Title:
Tag#
Serial Number
Description:
500464
Make/Model:*
Missing
Save Print
M&TE DevonWay Calipers Sta tus : I n Se r v i ce | Ass igned to : Zack Johnson
ASSET-2020 -0013
Asset is in service. Use the options below to make changes to this asset.
Enter a comment here then click [Save] to add it to the Activity Log
DevonWay: 3 Series
12345
03-Mar-2020
18:38Asset created by Zack Johnson
Details
Status HistoryService HistoryAssignment History
0-6in Caliper Calibration
Assignment Type Assignment Notes Date Asset Assigned
Date Receipt Confirmed
Date ClosedDate Transferred
03/03/20Assign Service
Current Task
Assigned
Assigned to
Zack Johnson
-Search All- Search DevonWay (Ctrl + Shift + E) Config Build
Home
More Info TroubleshootingReference Documents
CLBR 2020-0003 X
Options
Test Points
Activity Log:
Asset:
Serial Number:
Calibration Date:
Calibration Time:
Description:
0-6in Caliper Calibration
Test Point Description Nominal
Depth: 0” to 1”
Inside Diameter: .75 to 2”
Outer Diameter: 0” to 2”
Outer Diameter: 2” to 4”
Outer Diameter: 4” to 6”
0.49900
0.99000
0.99000
2.99000
4.99000
0.50000
1.00000
1.00000
3.00000
5.00000
Tolerance-Low
0.50100
1.00100
1.00100
3.00100
5.00100
Tolerance-High
MeasurementMethod
0.50000
1.00000
1.00000
3.00000
5.00000
As Found
0.50000
1.00000
1.00000
3.00000
5.00000
Gage Block
Gage Block
Gage Block
Ring Gage
Gage Block
Pass
Pass
Pass
Pass
Pass
Final Comments Test Point Result
Comments:
Save Print
Calibration MT&E DevonWay; 3 Series- Calipers 500464: 03/03/2020 Sta tus : I n Se r v i ce | Ass igned to : Zack Johnson
Fields with a red asterisk * are required
Enter a comment here then click [Save] to add it to the Activity Log
Upon saving this calibration, you won’t be able to make any additional changes.
03-Mar-2020
18:47Asset created by Zack Johnson
Main
ASSET-2020-0013; Calipers
12345
03/03/2020
18:43
Key Features
Fully Traceable
Each measurement and test equipment asset is tracked throughout its lifecycle and includes information about when it was purchased, its serial and model number, technical information, program identification tracking number, location, calibration procedures and history, repair history, issue history, use history, and more.
Automated Compliance
The Equipment Calibration solution ensures compliance to M&TE industry metrology quality control standards ANSI/NCSL Z540.3 or ISO/IEC 17025. In addition, should an M&TE standard be found out of calibration, all instruments calibrated with that standard are easily identified, located, and evaluated for re-calibration.
Summary of Benefits• Centralized equipment data that is fully traceable, easy to enter, and easy to access
• Maximum workflow flexibility with configurable process steps that match your organization’s requirements
• Maintain compliance via M&TE industry metrology quality control standards ANSI/NCSL Z540.3 or ISO/IEC 1702 that are coded directly into the platform
3
Properly calibrated tools are necessary for validating that assets are operating within
acceptable ranges – especially in regulated environments.
Managed Calibration Schedules
Each M&TE asset can be associated with its own calibration frequency. Auto-generated notifications keep users, program managers, supervisors, and other interested stakeholders aware of upcoming and overdue calibrations.
Calibration Tool Interfaces
Data from Bascom-Turner and other popular calibration equipment can be ingested into the DevonWay system for a complete record of an instrument’s calibration history.
Barcode Scanning
In addition to an easy-to-use browser interface, users can use a barcode scanner to easily search for and add M&TE assets.
Standalone or Integrated
The Equipment Calibration solution can be used stand-alone or fully integrated with DevonWay or third-party asset and quality management systems, ensuring a seamless experience for users.
4
devonway.com
1.888.DevonWay
