Equipment and Accessory Guide - Edhardedhard.com/specpic/Color catalog.pdf · Equipment and...
Transcript of Equipment and Accessory Guide - Edhardedhard.com/specpic/Color catalog.pdf · Equipment and...
Equipment and Accessory Guide
WELCOMEWe welcome all newcomers to the world of Edhard!
Due to the versatility of our equipment and systems we have arranged the following concepts to helpguide you in making a decision or, at least, give you an understanding of the type of information yourEdhard representative will need in order to determine the best equipment to satisfy your requirements.
Before looking through this brochure please take some time to think about the following conditionsand answer the questions.
Dosing actionInject - 1 or 2 at a timeDeposit - 1, 2 or 4 at a timeFill - Jars, Bottles, Containers, etc.Transfer
Product charactersiticsIs it smooth or does it have inclusions/particles?
If it has particles - what are their size and ratio to overall product?What is the product’s viscosity or thickness?Is it whipped and airy?At what temperature is it to be dispensed - chilled, room temp, hot?Does the product flow? Does a mound of it collapse and level or does it hold a shape?
Dosage amountFractions of an ounce to poundsGrams to Kilograms
Pan or container configuration and size2-4 at a time - center to center spacing
Typical production run volumeQuantity of finished products produced daily.Multiple mixing bowls? How many?Expected equipment usage time daily / weekly.
The above information coupled with an understanding of the terminology on the following pages willhelp you navigate this product listing and help your Edhard representative best understand yourneeds.
ÅÅÅ
Å
ÅÅÅ
Å
Å
ÅÅ
Å
ÅÅÅ
Å
EDHARD TERMINOLOGY
POWER BASE
FILLER UNIT
PUMP
HOPPER
DOUBLE OUTLET
SINGLE OUTLET
Cream-colored unit that houses electronics and motor. Engages Pump or Filler Unitand makes them dispense product. Keypad controls the amount of productdispensed, cycle-type and, in some models, the speed of output. Available in 3styles of table-top unit (PPPPP-----, PS-PS-PS-PS-PS- & PVPVPVPVPV-Series-Series-Series-Series-Series) as well as the stand-alone unit (PTPTPTPTPT-Series-Series-Series-Series-Series).
A Lexan Hopper and Pump Housing combination coupled with a Pump Cover Assem-bly and Gear-Type Impellers. The Pump Housing and Hopper are fused together andare not meant to be taken apart. Filler Units refer to the FFFFF----- and FHPFHPFHPFHPFHP-Series-Series-Series-Series-Series. Accept awide variety of Spouts and Attachments. FFFFF-Series-Series-Series-Series-Series available in Single and DoubleOutlet while FHPFHPFHPFHPFHP-Series-Series-Series-Series-Series available in Single Outlet only. Used for loose to mediumviscosity proucts.
A stainless steel, Single Outlet unit that houses either Gear-Type or Lobe-TypeImpellers and accepts a wide variety of Lexan and stainless steel Hoppers or aSuction Tube (FTFTFTFTFT----- & FTRFTRFTRFTRFTR-Series-Series-Series-Series-Series only). Can dispense a wide range of viscosities. Usedsolely on higher output Power Bases (PS-PS-PS-PS-PS-, PVPVPVPVPV----- and PTPTPTPTPT-Series-Series-Series-Series-Series).
Funnel constructed of either Lexan or stainless steel, which threads or clamps onto astainless steel Pump. Available in 6(5.5), 10(9.5), 18(17) and 36Qt.(34) capacities.
Refers to the amount of exit holes on a Filler Unit. Double Outlet Filler Units acceptonly 7/16” (11.1) Dia. Spouts. These units are used primarily for injecting product into abaked good (think donut or eclair filling).
Refers to the amount of exit holes on a Filler Unit or Pump. Single Outlet Filler Unitsand Pumps accept only 7/8” (22.2) Dia. Spouts. These units are primarily used fordepositing or layering product into containers (pans, bags, tubes etc.) or onto otherproducts (cakes, muffins, pie crusts, bagels etc.). Far more versatile in application thanthe Double Outlet.
SPOUT Any output attachment that enables you to inject, deposit, layer or otherwise dispenseproduct from a Filler Unit or Pump.
GEAR-TYPE
LOBE-TYPE
Refers to the type of Impeller with 6 or more teeth. Used for smooth products ofvarying viscosities. Standard in the FFFFF----- & FHPFHPFHPFHPFHP-Series-Series-Series-Series-Series Filler Units and FS-FS-FS-FS-FS- & FTFTFTFTFT-Series-Series-Series-Series-SeriesPumps. Available materials include: Polypropylene, UHMW, Nylon, PEEK & Stainless
Refers to the type of Impeller with 2 to 3 rounded lobes as opposed to traditional gearteeth. Used for smooth products as well as products with suspended particles. Themaximum size of particles that can be passed without crushing is approximately 3/8”(9.6mm) Dia. (RPRPRPRPRP-Series-Series-Series-Series-Series) and up to 1/2” (12.7mm) Dia. (FTRFTRFTRFTRFTR-Sr-Sr-Sr-Sr-Sreieseieseieseieseies). Effective with mediumto higher viscosities. Standard in the RPRPRPRPRP----- and FTRFTRFTRFTRFTR-Series-Series-Series-Series-Series Pumps. Available materialsinclude: Viton, Stainless Steel & PEEK.
11111
KEYPPPPP-, PS- & PV-, PS- & PV-, PS- & PV-, PS- & PV-, PS- & PV-Series-Series-Series-Series-Series
Sits on the Power Base and is available in Lexan. Accepts either one7/8ӯ (22.2mm) or two 7/16ӯ (11.1mm) spouts. FFFFF-Series-Series-Series-Series-Series usedfor lighter, less viscous products. FHPFHPFHPFHPFHP-Series-Series-Series-Series-Series used for a wider rangeincluding more viscous and even semi-liquid products.
Sits on the Power Base and is available in Stainless Steel. Accepts one7/8ӯ (22.2mm) spout. FS-SeriesFS-SeriesFS-SeriesFS-SeriesFS-Series uses 6-tooth Gear-type Impellersfor smooth products. RPRPRPRPRP-Series-Series-Series-Series-Series uses Lobe-type Impellers for widerrange of products including those with particles up to 3/8ӯ (9.6mm).Both accept removeable Hoppers in either Lexan or Stainless Steel.
Attaches to Pump . Available in 6Qt. (5L) and 18Qt. (17L) Lexan or10Qt. (9L), 18Qt. (17L) and 36Qt. (34L) Stainless Steel.
Pressure Disc keeps stiff products from cavitating. Heating Jackets helpmaintain temperature in Stainless Steel Hoppers.
Fits Filler Units and Pumps and available as either Double Output :7/16ӯ (11.1mm) neck or Single Output : 7/8ӯ (22.2mm) neck.
Orifices and Adaptors available in two thread sizes - 3/4” (19mm) and7/8” (22.2mm).
22222
DS
S
H
P
A POPOPOPOPOWER BWER BWER BWER BWER BAAAAASE ASE ASE ASE ASE ACCESSORCCESSORCCESSORCCESSORCCESSORYYYYY:::::
C CUPCCUPCCUPCCUPCCUPCAKE SPOUTAKE SPOUTAKE SPOUTAKE SPOUTAKE SPOUT:::::
TT THREADED ADTHREADED ADTHREADED ADTHREADED ADTHREADED ADAPTAPTAPTAPTAPTOR:OR:OR:OR:OR:
D S SPOUTSPOUTSPOUTSPOUTSPOUT:::::
JP HOPPER AHOPPER AHOPPER AHOPPER AHOPPER ACCESSORCCESSORCCESSORCCESSORCCESSORYYYYY:::::
H HOPPER:HOPPER:HOPPER:HOPPER:HOPPER:
P PUMP:PUMP:PUMP:PUMP:PUMP:
FILLER UNITFILLER UNITFILLER UNITFILLER UNITFILLER UNIT:::::F F
Stainless Steel Cupcake Spout with 4 down-spouts and variouscenter-to-center spacings. Available in two thread sizes - 3/4” (19mm)and 7/8” (22.2mm).
Various accessories that fit any tabletop Power Base.
A
Attaches to Suction-type Pump and allows product to be dosedfrom any size mixing bowl or drum. Available in 1-1/4ӯ (w/ checkvalve for loose, runny products) or 2ӯ (w/out check valve for thickerproducts).
H
G
CDRCDRCDRCDRCDR-Series-Series-Series-Series-Series
KEY33333
PTPTPTPTPT-Series-Series-Series-Series-Series
Attaches to Hopper-type Pump and used for more viscousproducts. Available in 18Qt. (17L) and 36Qt. (34L) Stainless Steel.
Mates various types of Spouts, Elbows or Hoses to anyFT- or FTR-Series Pump .
P
S SUCTION TUBE:SUCTION TUBE:SUCTION TUBE:SUCTION TUBE:SUCTION TUBE: P
ADADADADADAPTAPTAPTAPTAPTOR:OR:OR:OR:OR:P
HS E
S E H
H HOPPER:HOPPER:HOPPER:HOPPER:HOPPER:
OUTPUT AOUTPUT AOUTPUT AOUTPUT AOUTPUT ACCESSORCCESSORCCESSORCCESSORCCESSORYYYYY::::: Various Spouts, Elbows and Hose Assemblies to finish off the depositingsystem.
DECORADECORADECORADECORADECORATING GUN:TING GUN:TING GUN:TING GUN:TING GUN:
HOSE AHOSE AHOSE AHOSE AHOSE ASSEMBLSSEMBLSSEMBLSSEMBLSSEMBLYYYYY:::::
Available in Pistol-type or Straight-type depending on user’s preference.Pistol-type available in righthanded and lefthanded versions. Both typeswill acept most sizes and types of decorating tips through the use of ourspecially designed Adaptors.
Made to fit CDR-type Pumps .
PUMP:PUMP:PUMP:PUMP:PUMP:
P
P Sits on Power Base and is available in Gear-type and Lobe-typeversions. Accepts Stainless Steel and Lexan Hoppers in 18Qt. (17L)or 36Qt. (34L) capacities. Comes standard with De-aerator andBleeder Tube. Accepts CDR-type Hose Assembly.
H
P PUMP:PUMP:PUMP:PUMP:PUMP: Sits on the Power Base and is available in Stainless Steel. AcceptsAdaptors with sanitary flanges. FTFTFTFTFT-Series-Series-Series-Series-Series uses Gear-type Impellersfor smooth products. FTRFTRFTRFTRFTR-Series-Series-Series-Series-Series uses two Lobe-type Impellers for widerrange of products including those with particles up to1/2ӯ (12.7mm).Both types can accept a removeable Stainless Steel Hopper (forviscous products) or a Suction Tube (for less viscous and evensemi-liquid products).
HS
A
Equipment and Accessory Guide
Power Base · Model MK
Filler Unit · Lexan · Single Outlet
FFFFF-5003-5003-5003-5003-5003: 6 Qt. (5.5L) capacityFFFFF-5007-5007-5007-5007-5007: 18 Qt. (17L) capacity
FFFFF-5000-5000-5000-5000-5000: 6 Qt. (5.5L) capacity w/ 2 x F-3076 spoutsFFFFF-500-500-500-500-50011111: 6 Qt. (5.5L) capacity w/ 2 x F-3011 spoutsFFFFF-500-500-500-500-5001 N/S1 N/S1 N/S1 N/S1 N/S: 6 Qt. (5.5L) capacity w/ no spoutsFFFFF-5005-5005-5005-5005-5005: 18 Qt. (17L) capacity w/ 2 x F-3011 spoutsFFFFF-5005 N/S-5005 N/S-5005 N/S-5005 N/S-5005 N/S: 18 Qt. (17L) capacity w/ no spouts
PPPPP-40-40-40-40-401111100000: 120VAC · 60/50Hz · 1/37Hp (20.2W) motor
Power Base · Model MKS
PS-4028PS-4028PS-4028PS-4028PS-4028: 120VAC · 60/50Hz · 1/8Hp (93.2W) motorPS-4030PS-4030PS-4030PS-4030PS-4030: 220VAC · 50/60Hz · 1/8Hp (93.2W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
PVPVPVPVPV-4000-4000-4000-4000-4000: 120VAC · 50/60Hz · 1/4Hp (186.4W) motorPVPVPVPVPV-400-400-400-400-40011111: 220VAC · 50/60Hz · 1/4Hp (186.4W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
Filler Unit · Lexan · Single Outlet - High Pressure
FHPFHPFHPFHPFHP-5025-5025-5025-5025-5025:Gear-Type18 Qt. (17L) capacityFHPFHPFHPFHPFHP-5026-5026-5026-5026-5026:Gear-Type6 Qt. (5.5L) capacityFHPFHPFHPFHPFHP-503-503-503-503-50311111: Gear-Type18 Qt. (17L) capacity w/ Pressure Disc
Pump Cover · Teflon-coated Aluminum · Single Outlet
FFFFF-36-36-36-36-361111155555: Higher strength replacement cover forLexan SingleOutlet Filler Units
Pump Cover · Teflon-coated Aluminum · Double Outlet
FFFFF-36-36-36-36-361111166666: Higher strength replacement cover forLexan DoubleOutlet Filler Units
Filler Unit · Lexan · Double Outlet
F
F
S
D
OPT
ION
OPT
ION
What fits me?
What fits me?
What fits me?
What fits me?
F
Pumps and Filler UnitsPumps and Filler UnitsPumps and Filler UnitsPumps and Filler UnitsPumps and Filler Units
TTTTTabletop Pabletop Pabletop Pabletop Pabletop Power Basesower Basesower Basesower Basesower Bases
F HF P
What fits me?
What fits me?
Power Base · Model MKH
What fits me?
PPPPP-40-40-40-40-401111122222: 120VAC · 60/50Hz · 1/15Hp (49.7W) motorPPPPP-40-40-40-40-40111112-HS2-HS2-HS2-HS2-HS: 120VAC · 60/50Hz · 1/15Hp (49.7W) motor w/ 240RPM outputPPPPP-4020-4020-4020-4020-4020: 220VAC · 50/60Hz · 1/17Hp (43.9W) motor - Specify power cord plug type:
Australian, Euro, Italian, UK
Power Base · Variable Speed · Model MKV
F A
FF A
FF P A
FF P A
S P
44444
Equipment and Accessory Guide
Pump · Stainless Steel · Single Outlet
FS-3FS-3FS-3FS-3FS-3111115353535353: Gear-TypeStainless ImpellersFS-34FS-34FS-34FS-34FS-341111144444: Gear-TypeNylon Impellers
Pump · Stainless Steel · Single Outlet
RPRPRPRPRP-3-3-3-3-3111116060606060: Lobe-Type Viton 3-Lobe ImpellersRPRPRPRPRP-3527-3527-3527-3527-3527: Lobe-Type PEEK 3-Lobe ImpellersRPRPRPRPRP-35-35-35-35-351111144444: Lobe-Type Stainless 3-Lobe Impellers (High Heat)
Hopper · Lexan · for use on FS- and RP-Series Pumps
FS-3FS-3FS-3FS-3FS-3111115555555555: 6 Qt. (5.5L) capacityFS-3FS-3FS-3FS-3FS-3111115050505050: 18 Qt. (17L) capacity
Hopper · Stainless Steel · for use on FS- and RP-Series Pumps
FS-2342FS-2342FS-2342FS-2342FS-2342: 10 Qt. (9.5L) capacityFS-23FS-23FS-23FS-23FS-231111133333: 18 Qt. (17L) capacity w/ 30° neckFS-244FS-244FS-244FS-244FS-24477777: 18 Qt. (17L) capacity w/ 45° neckFS-27FS-27FS-27FS-27FS-274848484848: 36 Qt. (34L) capacity
H
H
P
P
What fits me?
What fits me?
What fits me?
Pump · Stainless Steel · Single OutletRPRPRPRPRP-352-352-352-352-35211111: Lobe-Type Viton 3-Lobe Impellers w/ Sanitary Outlet
P
What fits me?
RPRPRPRPRP-3529-3529-3529-3529-3529: Gear-TypePEEK Impellers - For Liquids
What fits me?
Pump · Stainless Steel · Single OutletP
What fits me?
H S
H S
AH
SH
J P
55555
P
Equipment and Accessory Guide
Pressure Disc
FHPFHPFHPFHPFHP-3368-3368-3368-3368-3368: Lexan for use with 18 Qt. (17L) FHP-Series Filler Unit or FS-3150FS-3202FS-3202FS-3202FS-3202FS-3202: Stainless Steel for use with 18 Qt. (17L) S.S. Hopper w/ 45° neckFS-330FS-330FS-330FS-330FS-33011111: Stainless Steel for use with 36 Qt. (34L) Hopper
Accessories and SpoutsAccessories and SpoutsAccessories and SpoutsAccessories and SpoutsAccessories and Spouts
Heating Jacket · Variable temperature
FS-3269FS-3269FS-3269FS-3269FS-3269: 120VAC · Lower section for use on 18 Qt. (17L) S.S. Hopper w/ 30° neckFS-327FS-327FS-327FS-327FS-32700000: 120VAC · Upper section for use on 18 Qt. (17L) S.S. HopperFS-327FS-327FS-327FS-327FS-32711111: 240VAC · Lower section for use on 18 Qt. (17L) S.S. Hopper w/ 30° neckFS-327FS-327FS-327FS-327FS-32722222: 240VAC · Upper section for use on 18 Qt. (17L) S.S. Hopper
J
FS-3FS-3FS-3FS-3FS-3111114848484848: Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long for use onF-, FS- and RP-Series Pumps
CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Hose Assy. · 7/8”Threaded Tip - Specify Length
Spout · 7/8” Threaded TipS
PS-3328PS-3328PS-3328PS-3328PS-3328: Used to counterbalance a Hose Assy. on any table-top Power Base
A Balancer Assy.
PPPPP-3026-3026-3026-3026-3026: Footswitch for remote operation of all Power BasesNONONONONOTETETETETE: For Footswiches to fit older model Power Bases please
contact us for the proper connector type.
FootswitchA
P
JA SP D T T C
66666
What fits me?
D T
PPPPP-3634-3634-3634-3634-3634: Used to raise any table-top Power Base over the work surface.
A Bridge
Equipment and Accessory Guide
FFFFF-30-30-30-30-301111111111: Donut · 7/16”Ø x 3-1/2”L (11.1mm x 89mm)
FFFFF-30-30-30-30-301111122222: Eclair-Slit · 7/16”Ø x 5”L (11.1mm x 127mm)
Spout · Double Outlet · Standard Tip
Spout · Double Outlet · Standard Tip
FFFFF-3065-3065-3065-3065-3065: Long John-Slit · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Spout · Double Outlet · Standard Tip
FFFFF-3064-3064-3064-3064-3064: Long John · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Spout · Double Outlet · Standard Tip
FFFFF-307-307-307-307-30766666: Munchkin · 9/32”Ø x 2-1/4”L (7.1mm x 57.1mm)
Spout · Double Outlet · 30° Tip
FFFFF-3066-3066-3066-3066-3066: Frenchie · 3/16”Ø x 1-5/8”L (4.8mm x 41.3mm)
Spout · Double Outlet · 30° Tip
FFFFF-308-308-308-308-30811111: Berliner · 1/4”Ø x 1-5/8”L (6.4mm x 41.3mm)
Spout · Double Outlet · 30° Tip
FFFFF-30-30-30-30-301111144444: Blueberry · 7/16”Ø x 3-1/4”L (11.1mm x 82.5mm)
Spout · Double Outlet · 30° Tip
FFFFF-30-30-30-30-301111133333: Eclair · 7/16”Ø x 5”L (11.1mm x 127mm)
Spout · Double Outlet · Standard Tip
D
D
D
D
D
D
D
D
D
77777
Equipment and Accessory Guide
FFFFF-3094-3094-3094-3094-3094: Donut · 7/16”Ø x 3-1/2”L (11.1mm x 89mm)
FFFFF-3092-3092-3092-3092-3092: Eclair-Slit · 7/16”Ø x 5”L (11.1mm x 127mm)
Spout · Standard Tip
Spout · Standard Tip
FFFFF-3096-3096-3096-3096-3096: Long John-Slit · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Spout · Standard Tip
FFFFF-3095-3095-3095-3095-3095: Long John · 5/16”Ø x 4-3/8”L (7.9mm x 111.1mm)
Spout · Standard Tip
FFFFF-3339-3339-3339-3339-3339: Frenchie · 3/16”Ø x 1-5/8”L (4.8mm x 41.3mm)
Spout · 30° Tip
FFFFF-3067-3067-3067-3067-3067: Plain · 7/8”Ø x 7”L (22.2mm x 177.8mm)
Spout · 90° Tip
FFFFF-3055-3055-3055-3055-3055: Cannoli · 9/16”Ø x 3”L (14.3mm x 76.2mm)
Spout · 90° Tip
FFFFF-3097-3097-3097-3097-3097: Munchkin · 9/32”Ø x 2-1/4”L (7.1mm x 57.1mm)
Spout · 30° Tip
FFFFF-3090-3090-3090-3090-3090: Blueberry · 7/16”Ø x 3-1/4”L (11.1mm x 82.5mm)
Spout · 30° Tip
FFFFF-309-309-309-309-30911111: Eclair · 7/16”Ø x 5”L (11.1mm x 127mm)
Spout · Standard Tip
S
S
S
S
S
S
S
S
S
S
88888
Equipment and Accessory Guide
FFFFF-3043-3043-3043-3043-3043: 45° · 7/8”Ø x 4-3/4”L (22.2mm x 120.6mm)
Spout · 90° Tip
FFFFF-3042-3042-3042-3042-3042: Croissant · 3/16”Ø x 1”L - 4 places (4.8mm x 25.4mm)
Spout · Multi Tip
FFFFF-3-3-3-3-3111110000011111: Triple · 3/16”Ø x 1”L - 3 places (4.8mm x 25.4mm)
Spout · Multi Tip
FFFFF-304-304-304-304-30411111: Cupcake · 3/4”Ø x 3-1/4”Spacing (19mm x 82.5mm)FFFFF-3-3-3-3-3111110303030303: Cupcake · 3/4”Ø x 3-1/2”Spacing (19mm x 89mm)FFFFF-307-307-307-307-30722222: Cupcake · 3/4”Ø x 4”Spacing (19mm x 101.6mm)
Spout · 3/4” Threaded Tip
FFFFF-3-3-3-3-3111114444411111: Universal Extension · 7/8”Ø x 6-1/4”L (22.2mm x 158.7mm)FFFFF-339-339-339-339-33911111: Universal Extension · 7/8”Ø x 12-1/4”L (22.2mm x 311.1mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Universal Extension · 7/8”Ø x Specify Length
Spout · 7/8” Threaded Tip
FS-3305FS-3305FS-3305FS-3305FS-3305: Double Spout Manifold · for use on FS- and RP-Series Pumpswith any Double Outlet Spout
Manifold
S
S
S
S
S
S
T
T
D
What fits me?
What fits me?
What fits me?
FS-3335FS-3335FS-3335FS-3335FS-3335: Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long w/ F-3141Extension wand for use on F-, FS- & RP-Series Pumps
CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Hose Assy. · 7/8”Threaded Tip - Specify Length
Spout · w/ Stainless Extension and 7/8” Threaded TipS
What fits me?
S T
99999
Equipment and Accessory Guide
FFFFF-34-34-34-34-347777722222: Cupcake · 3/4”Ø x 2-1/4”Spacing (19mm x 57.15mm)FFFFF-3590-3590-3590-3590-3590: Cupcake · 3/4”Ø x 2-3/8”Spacing (19mm x 60.33mm)FFFFF-34-34-34-34-347777733333: Cupcake · 3/4”Ø x 2-1/2”Spacing (19mm x 63.5mm)FFFFF-3389-3389-3389-3389-3389: Cupcake · 3/4”Ø x 2-3/4”Spacing (19mm x 68.85mm)FFFFF-3405-3405-3405-3405-3405: Cupcake · 3/4”Ø x 3-1/4”Spacing (19mm x 82.55mm)FFFFF-3556-3556-3556-3556-3556: Cupcake · 3/4”Ø x 3-1/2”Spacing (19mm x 88.9mm)FFFFF-34-34-34-34-347777744444: Cupcake · 3/4”Ø x 3-5/8”Spacing (19mm x 92.07mm)FFFFF-3406-3406-3406-3406-3406: Cupcake · 3/4”Ø x 4”Spacing (19mm x 101.6mm)FFFFF-3562-3562-3562-3562-3562: Cupcake · 3/4”Ø x 4-1/8”Spacing (19mm x 104.78mm)FFFFF-3390-3390-3390-3390-3390: Cupcake · 3/4”Ø x 4-1/4”Spacing (19mm x 107.95mm)FFFFF-34-34-34-34-347777755555: Cupcake · 3/4”Ø x 4-1/2”Spacing (19mm x 114.3mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Cupcake · Specify Spacing
Spout · 3/4” Threaded Tip
FFFFF-354-354-354-354-35477777: Cupcake · 7/8”Ø x 1-1/2”Spacing (22.2mm x 38.1mm)FFFFF-3532-3532-3532-3532-3532: Cupcake · 7/8”Ø x 2”Spacing (22.2mm x 50.8mm)FFFFF-3533-3533-3533-3533-3533: Cupcake · 7/8”Ø x 2-1/4”Spacing (22.2mm x 57.15mm)FFFFF-359-359-359-359-35911111: Cupcake · 7/8”Ø x 2-3/8”Spacing (22.2mm x 60.33mm)FFFFF-3534-3534-3534-3534-3534: Cupcake · 7/8”Ø x 2-1/2”Spacing (22.2mm x 63.5mm)FFFFF-3535-3535-3535-3535-3535: Cupcake · 7/8”Ø x 2-3/4”Spacing (22.2mm x 69.85mm)FFFFF-3560-3560-3560-3560-3560: Cupcake · 7/8”Ø x 3”Spacing (22.2mm x 76.2mm)FFFFF-3557-3557-3557-3557-3557: Cupcake · 7/8”Ø x 3-1/4”Spacing (22.2mm x 82.55mm)FFFFF-3494-3494-3494-3494-3494: Cupcake · 7/8”Ø x 3-1/2”Spacing (22.2mm x 88.9mm)FFFFF-3525-3525-3525-3525-3525: Cupcake · 7/8”Ø x 3-5/8”Spacing (22.2mm x 92.08mm)FFFFF-3559-3559-3559-3559-3559: Cupcake · 7/8”Ø x 4”Spacing (22.2mm x 101.6mm)FFFFF-356-356-356-356-35611111: Cupcake · 7/8”Ø x 4-1/8”Spacing (22.2mm x 104.78mm)FFFFF-3558-3558-3558-3558-3558: Cupcake · 7/8”Ø x 4-1/4”Spacing (22.2mm x 107.95mm)FFFFF-3550-3550-3550-3550-3550: Cupcake · 7/8”Ø x 4-1/2”Spacing (22.2mm x 114.3mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Cupcake · Specify Spacing
Spout · 7/8” Threaded Tip
FFFFF-32-32-32-32-321111122222: Bread Roll · 3-3/8”Ø (85.7mm) w/ 7/8”Threaded Inlet
Spout · Accessory
FFFFF-32-32-32-32-32111113:3:3:3:3: Bagel · 3-3/8”Ø (85.7mm) w/ 7/8”Threaded Inlet
Spout · Accessory
C
T
C
T
T
T
What fits me?
What fits me?
CFS-327FS-327FS-327FS-327FS-32777777: Cupcake · 7/8”Ø x 4-3/4”L (22.2mm x 120.6mm)FS-3393FS-3393FS-3393FS-3393FS-3393: Cupcake · 7/8”Ø x 8”L (22.2mm x 203.2mm)FS-3394FS-3394FS-3394FS-3394FS-3394: Cupcake · 7/8”Ø x 10.5”L (22.2mm x 266.7mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Cupcake · 7/8”Ø x Specify Length
Spout · ExtensionS
What fits me?
1111100000
Equipment and Accessory Guide
FFFFF-20-20-20-20-20111114545454545: Round · .22”Ø (5.6mm)FFFFF-2887-2887-2887-2887-2887: Round · .38”Ø (9.7mm)FS-27FS-27FS-27FS-27FS-276060606060: Round · .47”Ø (12mm)FS-27FS-27FS-27FS-27FS-273939393939: Round · .56”Ø (14.2mm)FS-27FS-27FS-27FS-27FS-274040404040: Rectangular · .19 x .38” (4.8mm x 9.7mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Either Shape · Specify Siziing
Orifice
FFFFF-3-3-3-3-3111118787878787: Dripless - Extended · 7/8” (22.2mm) Threaded Inlet
Valve
FFFFF-2327-2327-2327-2327-2327: Decorating Tip · .56”Ø (14.2mm)FS-2397FS-2397FS-2397FS-2397FS-2397: Decorating Tip · .38”Ø (9.7mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Decorating Tip · Specify Diameter
Orifice
FFFFF-3-3-3-3-3111114444477777: Dripless · 7/8” (22.2mm) Threaded Inlet
Valve
FFFFF-3267-3267-3267-3267-3267: Spout · 7/8”(22.2mm) Thread - 7/16”Ø (11.1mm) accepts anyDouble Outlet Spout
Adaptor
CD-3258CD-3258CD-3258CD-3258CD-3258: Decorator Tip · #0 - #3CD-3259CD-3259CD-3259CD-3259CD-3259: Decorator Tip · #4 - #6CD-3260CD-3260CD-3260CD-3260CD-3260: Decorator Tip · #7 - #9CD-3266CD-3266CD-3266CD-3266CD-3266: Decorator Tip · EuroFS-3FS-3FS-3FS-3FS-3111118888888888: Decorator Tip · Small
Adaptor
T
T
T
T
T
T
D
What fits me?
1111111111
FFFFF-207-207-207-207-2076666611111: Bottle Filling · Used to aid in the filling of small-neck bottles.
OrificeT
FFFFF-207-207-207-207-2076868686868: Dripless - Bottle Filling · Used on F-3187 Dripless Valve Extended to aidin filling bottles.
AdaptorA
A
What fits me?
A
What fits me?
Equipment and Accessory Guide
FFFFF-357-357-357-357-35777777: Double · 3/4”Ø x 1-3/4”L (19mm x 44.45mm)FFFFF-3602-3602-3602-3602-3602: Double · 3/4”Ø x 3”L (19mm x 76.2mm)FFFFF-3539-3539-3539-3539-3539: Double · 3/4”Ø x 3-1/4”L (19mm x 82.55mm)FFFFF-3-3-3-3-3111114040404040: Double · 3/4”Ø x 4-1/2”L (19mm x 114.3mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Double · 3/4”Ø x Specify Spacing
Spout · Accessory · Threaded Tip
FFFFF-3-3-3-3-3111114242424242: Dripless · 3/4” (19mm) Threaded Inlet
Valve
FFFFF-32-32-32-32-321111144444: Dripless - Extended · 3/4” (19mm) Threaded Inlet
Valve
FFFFF-3580-3580-3580-3580-3580: Double · 7/8”Ø x 1-3/16”L (22.2mm x 30.18mm)FFFFF-357-357-357-357-35788888: Double · 7/8”Ø x 1-3/4”L (22.2mm x 44.45mm)FFFFF-32-32-32-32-321111111111: Double · 7/8”Ø x 2”L (22.2mm x 50.8mm)FFFFF-3537-3537-3537-3537-3537: Double · 7/8”Ø x 2-1/2”L (22.2mm x 63.5mm)FFFFF-3538-3538-3538-3538-3538: Double · 7/8”Ø x 2-3/4”L (22.2mm x 69.85mm)FFFFF-354-354-354-354-35411111: Double · 7/8”Ø x 3”L (22.2mm x 76.2mm)FFFFF-3540-3540-3540-3540-3540: Double · 7/8”Ø x 3-1/4”L (22.2mm x 82.55mm)FFFFF-3496-3496-3496-3496-3496: Double · 7/8”Ø x 3-1/2”L (22.2mm x 88.9mm)FFFFF-34-34-34-34-347777788888: Double · 7/8”Ø x 4”L (22.2mm x 101.6mm)FFFFF-34-34-34-34-347777799999: Double · 7/8”Ø x 4-1/2”L (22.2mm x 114.3mm)FFFFF-3588-3588-3588-3588-3588: Double · 7/8”Ø x 5”L (22.2mm x 127mm)FFFFF-3589-3589-3589-3589-3589: Double · 7/8”Ø x 5-1/2”L (22.2mm x 139.7mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Double · 7/8”Ø x Specify Spacing
Spout · Accessory · Threaded Tip
T
T
T
T
T
T
FFFFF-286-286-286-286-28611111: Layering · 1.19”L x .14”W (30mm x 3.6mm)FFFFF-24-24-24-24-241111199999: Layering · 1.6”L x .08”W (40.6mm x 2mm)FFFFF-2497-2497-2497-2497-2497: Layering · 1.6”L x .16”W (40.6mm x 4mm)FFFFF-2585-2585-2585-2585-2585: Layering · 1.97”L x .10”W (50mm x 2.54mm)FFFFF-24-24-24-24-241111188888 Layering · 2.36”L x .12”W (60mm x 3mm)FFFFF-259-259-259-259-25911111: Layering · 2.76”L x .12”W (70mm x 3mm)FFFFF-2696-2696-2696-2696-2696: Layering · 2.76”L x .14”W (70mm x 3.6mm)FFFFF-2592-2592-2592-2592-2592: Layering · 3.15”L x .10”W (80mm x 2.54mm)FFFFF-2695-2695-2695-2695-2695: Layering · 3.15”L x .14”W (80mm x 3.6mm)FFFFF-2-2-2-2-2111114444444444: Layering · 3.5”L x .19”W (89mm x 4.8mm)FFFFF-20959-20959-20959-20959-20959: Layering · 3.5”L x .25”W (89mm x 6.4mm)FFFFF-2267-2267-2267-2267-2267: Layering · 4”L x .28”W (101.6mm x 7.1mm)FFFFF-20842-20842-20842-20842-20842: Layering · 4.33”L x .078”W (110mm x 2mm)FFFFF-20843-20843-20843-20843-20843: Layering · 4.33”L x .393”W (110mm x 10mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Layering · Specify Length x Width
Spout · AccessoryT
What fits me?
What fits me?
1111122222
FS-3392FS-3392FS-3392FS-3392FS-3392: 7/8” Thread to 7/8” Ø · Used to mate Single Outlet Spoutsto a 7/8” threaded tip (Ex. F-3141)
AdaptorT
S
What fits me?
PT-SERIESThe Edhard PT-Series is a stand-alone system that can be used as a dosing pump and
also as a transfer pump. Its reversible motor means that this system can be used with a
suction tube (for looser products) as well as a gravity-fed hopper (just
like our table-top units).
The system is comprised of four major components -
Various Accessories are available to finish off the
system - Batter Spouts, Elbows, Extensions, etc.
Remember, if you don’t see what you had in
mind chances are good that we can
manufacture something to meet your
specifications.
Please call or e-mail with any questions.
1111133333
2
1
4
2
1
3
4
3
279 Blau Road · Hackettstown, NJ 07840 · USA908.850.8444 · 888.edhard.1 · Fax: [email protected]
PPPPPower Baseower Baseower Baseower Baseower Base
PumpPumpPumpPumpPump
CartCartCartCartCart
Suction TSuction TSuction TSuction TSuction Tube/Hopperube/Hopperube/Hopperube/Hopperube/Hopper
Equipment and Accessory Guide
PTPTPTPTPT-4035-4035-4035-4035-4035: 200W motor 120VAC Model MKTPTPTPTPTPT-4036-4036-4036-4036-4036: 200W motor 220VAC Model MKTPTPTPTPTPT-4037-4037-4037-4037-4037: 400W motor 220VAC Model MKT
PTPTPTPTPT-80-80-80-80-801111100000: Stainless Steel · for use with PT-Series Power Bases
Cart
Suction Tube
FTRFTRFTRFTRFTR-3343-3343-3343-3343-3343: Lobe-Type Viton 3-Lobe Impellers
FTFTFTFTFT-3342-3342-3342-3342-3342: Gear-TypeStainless and Nylon ImpellersFTFTFTFTFT-3465-3465-3465-3465-3465: Gear-TypePEEK Impellers
FTFTFTFTFT-337-337-337-337-33755555: 1-1/4ӯ w/ ball check valveFTFTFTFTFT-3430-3430-3430-3430-3430: 2ӯ w/out ball check valve
PTPTPTPTPT-338-338-338-338-33811111: Used to counterbalance a Hose Asembly- attaches to column of PT-8010
Balancer Assembly
What fits me?
What fits me?
S
A
A
1111144444
P
What fits me?
P
P
Power Base · Variable Speed · Transfer Type
Pump · Suction · Stainless Steel
Pump · Suction · Stainless Steel
S
S
Equipment and Accessory Guide
FTFTFTFTFT-3399-3399-3399-3399-3399: Sanitary Fitting to 7/8” Ø (22.2mm) · used to mate Single OutletSpouts to FT- or FTR-Series Pumps
Adaptor
FTFTFTFTFT-3366-3366-3366-3366-3366: Gear-TypeStainless and Nylon ImpellersFTFTFTFTFT-3466-3466-3466-3466-3466: Gear-TypeStainless ImpellersFTFTFTFTFT-34-34-34-34-347777700000: Gear-TypePEEK Impellers · for Low-Viscosity productsFTFTFTFTFT-357-357-357-357-35733333: Gear-TypePEEK Impellers · Single Outlet Housing
FTRFTRFTRFTRFTR-337-337-337-337-33711111: Lobe-Type Viton 3-Lobe Impellers
Hopper · Stainless Steel · for use on FT- and FTR-Series Pumps
FTFTFTFTFT-20064-20064-20064-20064-20064: 18 Qt. (17L) capacity w/ 45° neckFTFTFTFTFT-20065-20065-20065-20065-20065: 18 Qt. (17L) capacity w/ 30° neckFTFTFTFTFT-20-20-20-20-20111113333311111: 36 Qt. (34L) capacity
FTFTFTFTFT-20-20-20-20-20111117777766666: Hose to Sanitary Fitting · used to mate Hose Assy.to FT- or FTR-Series Pumps
Adaptor
FTFTFTFTFT-3586-3586-3586-3586-3586: Connector · used to mate FT-Series Adaptors, Elbows, Batter& Cupcake spouts to FT- or FTR-Series Pumps
AdaptorA
A
A
S
J
What fits me?
What fits me?
What fits me?
What fits me?
What fits me?
FTFTFTFTFT-3520-3520-3520-3520-3520: Manifold · Double · 4” (101.6mm) spacing - sanitary connections
AdaptorA
What fits me?
What fits me?
H
FTRFTRFTRFTRFTR-35-35-35-35-351111166666: Lobe-Type Viton 3-Lobe Impellers · Single Outlet Housing
H
What fits me?
A H
A H
A H
AS
S E
1111155555
P
P
P Pump · Hopper Feed · Stainless Steel
Pump · Hopper Feed · Stainless Steel
Pump · Hopper Feed · Stainless Steel
P
Equipment and Accessory Guide
FTFTFTFTFT-202-202-202-202-2021111177777: Batter
Spout
FTFTFTFTFT-3395-3395-3395-3395-3395: Double Batter
Spout
FTFTFTFTFT-337-337-337-337-33766666: Dripless Cupcake · 3-1/4” (82.55) spacingCUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Dripless Cupcake · Specify spacing
Spout
Elbow · for use w/ FT-Series Stainless Cupcake Spouts
Elbow · for use w/ F-Series Stainless Cupcake SpoutsE
E
S
S
S
C
S
What fits me?
What fits me?
FTFTFTFTFT-337-337-337-337-33799999: Universal Extension to 7/8” Thread · 1-1/8”Ø - 7/8”Thread (28.6mm - 22.2mm)
Elbow · Threaded TipE
T
What fits me?
FTFTFTFTFT-337-337-337-337-33777777: Universal Extension · 1-1/8”Ø x 18-1/2”L (28.6mm x 470mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Universal Extension · 1-1/8”Ø x Specify Length
AdaptorA
What fits me?
S E
1111166666
FTFTFTFTFT-3386-3386-3386-3386-3386: Universal Extension to Cupcake Spout · 1-1/8”Ø - 7/8”Ø (28.6mm - 22.2mm)
FTFTFTFTFT-337-337-337-337-33788888: Universal Extension to Cupcake Spout · 1-1/8”Ø - 1-1/8”Ø (28.6mm - 28.6mm)
Equipment and Accessory Guide
FTFTFTFTFT-3563-3563-3563-3563-3563: Cupcake · 3/4”Ø x 3-1/4”Spacing (11.1mm x 82.55mm)FTFTFTFTFT-357-357-357-357-35700000: Cupcake · 7/8”Ø x 2-3/4”Spacing (22.2mm x 69.85mm)FTFTFTFTFT-3569-3569-3569-3569-3569: Cupcake · 7/8”Ø x 3-1/4”Spacing (22.2mm x 82.55mm)FTFTFTFTFT-3568-3568-3568-3568-3568: Cupcake · 7/8”Ø x 3-3/8”Spacing (22.2mm x 85.73mm)FTFTFTFTFT-3567-3567-3567-3567-3567: Cupcake · 7/8”Ø x 3-5/8”Spacing (22.2mm x 92.08mm)FTFTFTFTFT-3566-3566-3566-3566-3566: Cupcake · 7/8”Ø x 4”Spacing (22.2mm x 101.6mm)FTFTFTFTFT-3565-3565-3565-3565-3565: Cupcake · 7/8”Ø x 4-1/8”Spacing (22.2mm x 104.78mm)FTFTFTFTFT-357-357-357-357-35711111: Cupcake · 7/8”Ø x 4-1/4”Spacing (22.2mm x 107.95mm)FTFTFTFTFT-3564-3564-3564-3564-3564: Cupcake · 7/8”Ø x 4-3/8”Spacing (22.2mm x 111.13mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Cupcake · Specify Spacing
Spout · 3/4” or 7/8” Threaded TipS
What fits me?
CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Spouts/Extensions/Orifices · Specify product, application, size, etc.
CustomSEA
FTFTFTFTFT-36-36-36-36-361111177777: Bundt · 4x7/8”Ø on a 3-1/2”Ø (4x22.2mm x 88.9mm)CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Bundt · 4x7/8”Ø x Specify Diameter
Spout · 7/8” Threaded Tip
T
What fits me?
S
SpoutH
FTFTFTFTFT-3402-3402-3402-3402-3402: Hose Assy. · 7/8”Threaded Tip - 36”(.914M) longCUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Hose Assy. · 7/8”Threaded Tip - Specify Length
SpoutH
FTFTFTFTFT-3548-3548-3548-3548-3548: Hose Assy. · 7/8”Threaded Tip - 36”(.914M) long w/ F-3141Extension wand for use on FT- & FTR-Series Pumps
CUSCUSCUSCUSCUSTTTTTOOOOOMMMMM: Hose Assy. · 7/8”Threaded Tip - Specify Length
What fits me?
TT
S T
1111177777
What fits me?
D T
CDR-SERIESThe Edhard CDR-Series is a table-top system that can be used to ice and decorate cakes,
create buttercream ornaments, and dispense various petitshue and spritz cookie batters.
Its lack of a dosing function differs this series from
the rest of our systems - the product will dispense
as long as the trigger is pulled giving the operator
artistic freedom when looks are more important
than portion control.
The system is comprised of five major components -
A couple of gun styles and orientations are
available as are Adaptors to accept most sizes
of decorating tips.
Please call or e-mail with any questions.
1111188888
279 Blau Road · Hackettstown, NJ 07840 · USA908.850.8444 · 888.edhard.1 · Fax: [email protected]
21
4
2
1
3
4
3
5
5
PPPPPower Baseower Baseower Baseower Baseower Base
PumpPumpPumpPumpPump
BalancerBalancerBalancerBalancerBalancer
Hose/DecorHose/DecorHose/DecorHose/DecorHose/Decorating Gunating Gunating Gunating Gunating Gun
Hopper/PrHopper/PrHopper/PrHopper/PrHopper/Pressuressuressuressuressure Disce Disce Disce Disce Disc
Equipment and Accessory Guide
CD-4050CD-4050CD-4050CD-4050CD-4050: 120VAC · 60/50Hz · 1/4Hp (186.4W) motorCD-4053CD-4053CD-4053CD-4053CD-4053: 220VAC · 50/60Hz · 1/4Hp (186.4W) motor
Power Base · Model CD
Hopper · Lexan or Stainless Steel
FS-3FS-3FS-3FS-3FS-3111115050505050: 18 Qt. (17L) capacityFS-244FS-244FS-244FS-244FS-24477777: 18 Qt. (17L) capacity w/ 45° neckFS-27FS-27FS-27FS-27FS-274848484848: 36 Qt. (34L) capacity
Pump · Stainless Steel · Single Outlet
CDRCDRCDRCDRCDR-3449-3449-3449-3449-3449: Gear-TypeStainless Steel Impellers
What fits me?
Pump · Stainless Steel · Single Outlet
CDRCDRCDRCDRCDR-3400-3400-3400-3400-3400: Lobe-Type Viton 3-Lobe Impellers
What fits me?
F
What fits me?
P
What fits me?
Pressure Disc
FHPFHPFHPFHPFHP-3368-3368-3368-3368-3368: Lexan for use with 18 Qt. (17L) Hopper [FS-3150]FS-3202FS-3202FS-3202FS-3202FS-3202: Stainless Steel for use with 18 Qt. (17L) Hopper [FS-2447]FS-330FS-330FS-330FS-330FS-33011111: Stainless Steel for use with 36 Qt. (34L) Hopper [FS-2748]
P
P
H
P
H H
H H
1111199999
Equipment and Accessory Guide
A Balancer Assy.
Hose
Gun · 7/8” Threaded Tip
T
What fits me?
Gun · 7/8” Threaded Tip
T
What fits me?
AdaptorT
CD-3252CD-3252CD-3252CD-3252CD-3252: Used to counterbalance a Hose and Gun Assy.
CDRCDRCDRCDRCDR-340-340-340-340-34011111: Cake Decorator · Made specifically to fit CDR- Pumps
CD-3367CD-3367CD-3367CD-3367CD-3367: Decorating · Straight-type
CD-3308CD-3308CD-3308CD-3308CD-3308: Elbow · Pistol-type GunCD-33CD-33CD-33CD-33CD-331111111111: Decorating · Pistol-type - Right handedCD-33CD-33CD-33CD-33CD-33111111LH1LH1LH1LH1LH: Decorating · Pistol-type - Left handed
CD-3258CD-3258CD-3258CD-3258CD-3258: Decorator Tip · #0 - #3CD-3259CD-3259CD-3259CD-3259CD-3259: Decorator Tip · #4 - #6CD-3260CD-3260CD-3260CD-3260CD-3260: Decorator Tip · #7 - #9CD-3266CD-3266CD-3266CD-3266CD-3266: Decorator Tip · EuroFS-3FS-3FS-3FS-3FS-3111118888888888: Decorator Tip · Small
What fits me?
G
H
G
G
TTTTT-4040-4040-4040-4040-4040: 120VAC · 60HzTTTTT-404-404-404-404-40411111: 220VAC · 50Hz
Turntable · Variable speed and Reversible direction
2020202020
279 Blau Road · Hackettstown · New Jersey 07840 · USA(TEL) 908.850.8444 · (FAX) 908.850.8445
888.edhard.1(USA & CANADA)
A-220104.07