Equipment - American Welding & Gas, Inc.: Your ... · Safeguard downstream equipment ... ⅜”BSP...
Transcript of Equipment - American Welding & Gas, Inc.: Your ... · Safeguard downstream equipment ... ⅜”BSP...
Equipment
300 Series Advantage Materials Specifications
Description Advanced Features Typical Applications
• Capsule®seatIncreased serviceability and life
• 316LstainlesssteeldiaphragmNo inboard diffusion
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• ConvoluteddiaphragmSmooth pressure changes
• CompactdesignEasily transported and integrated
304 Series single stage, brass barstock line regulator
The 304 Series regulators are intended for secondary pressure control of non-corrosive,highpurityorliquefiedgasesor as point of use pressure control in high purity gas distribution systems.
• Bulk gas distribution systems
• Gasandliquidchromatography
• Highpuritycarriergases
• Zero,span,andcalibrationgases
• Highpuritychamberpressurization
• Liquefiedhydrocarbongascontrol
• Controlofcryogenicgases
• Chrome-platedbrassbarstockbodySmoothsurfacefinish
• RearpanelmountableEasy installation
• Pressureranges0-15to0-500PSIGBroad range of applications
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
BodyChrome-plated brass barstock
BonnetChrome-plated die cast zinc
SeatPTFE
Filter10 micron sintered bronze
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauges2” diameter chrome-plated
Ports¼” FPT
Helium Leak Integrity1 x 10-9 scc/sec
Cv0.1 (Max outlet 50 PSIG or below)0.2 (Max outlet about 50 PSIG)
Weight (304-2021-TF4)1.7 lbs. (0.78 kg)
Equipment
Flow Performance
Ordering Information and Configuration Options
A B C D -Inlet Options304Series304
OutletPressure1: 0-152: 0-503: 0-1004: 0-2505: 0-5007: 0-150
OutletGauge30”-0-30 PSIG30”-0-100 PSIG30”-0-200 PSIG0-400 PSIG0-1000 PSIG30”-0-200 PSIG
InletGauge0: None
Assembly/Gauges0: Bare Body1: Standard Assembly
(PSIG/kPa Gauges)
2: Standard Assembly (BAR/PSIG Gauges)
InletConnections000: ¼” FPTTF2: ⅛”TubeTF4: ¼” TubeTF6: ⅜”TubeM06: 6mm Tube
OutletAssemblies0: ¼” FPT Port1: ¼” MPT2: ¼” Tube Fitting3: Diaphragm Valve
¼” Tube Fitting4: Diaphragm Valve
¼” MPT5: Needle Valve
¼” MPT6: ⅛”TubeFitting7: ⅜”TubeFitting8: Diaphragm Valve
⅛”TubeFitting9: Diaphragm Valve
¼” FPTA: ⅜”BSP
Right Hand FittingM: 6mm Tube FittingS: Diaphragm Valve
6mm Tube Fitting
InstalledOptionsNone
FLOW RATE - SCFM (LPM) N2
10(283)
40(1133)
35(991)
30(850)
25(708)
20(566)
15(425)
5(142)
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
OU
TLE
T P
RE
SS
UR
E -
PS
IG (B
AR
500(34.5)
450(31)
400(27.6)
350(24.1)
300(20.7)
250(17.2)
200(13.8)
150(10.3)
100(6.9)
50(3.4)
90(6.2)
80(5.5)
70(4.8)
60(4.1)
50(3.4)
40(2.8)
30(2.0)
20(1.4)
10(0.7)
100(6.9)
OU
TLE
T P
RE
SS
UR
E -
PS
IG (B
AR
FLOW RATE - SCFM (LPM) N2
10(283)
20(566)
15(425)
5(142)
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
300 Series Single Stage Regulator 300 Series Single Stage Regulator
1000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
400 Series Advantage Materials Specifications
Equipment
• Metal-to-metaldiaphragmsealNo possibility of gas contamination
• Capsule®seatIncreased serviceability and life
• 316LstainlesssteeldiaphragmNo inboard diffusion
• OrientablecapturedventcapableSafety in any installation
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• PipeawayreliefvalveSafely vent exhaust gases
• DeliverypressurerangeeasilychangedMaximum flexibility
Description Advanced Features Typical Applications
445 Series single stage, stainless steel barstock line regulator
• Bulk gas distribution systems
• Gasandliquidchromatography
• Highpuritycarriergases
• Zero,spanandcalibrationgases
• Highpuritychamberpressurization
• Liquefiedhydrocarbongascontrol
• Controlofcryogenicgases
• Corrosiveservice
• StainlesssteelbarstockbodySmoothsurfacefinish
• FrontandrearpanelmountableVersatilesystemconfiguration
• Pressureranges0-15to0-500PSIGBroad range of applications
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
The 445 Series regulators are intended for secondary pressure control of ultra high purity and corrosive gases or as point-of- use pressure control in high purity gas distribution systems.
Body316L stainless steel barstock
BonnetChrome-plated brass barstock
SeatPTFE
Filter10 micron stainless steel multi-layer mesh
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauge2” diameter stainless steel
Ports¼” FPT
Helium Leak Integrity1 x 10-9 scc/sec
Cv0.1 (Max outlet 50 PSIG or below)0.2 (Max outlet above 50 PSIG)
Weight (445-2021-TF4)2.57 lbs. (1.17 kg)
Equipment
Flow Performance
Ordering Information and Configuration Options
A B C D -Inlet Options
Related Options
445Series445
OutletPressure1: 0-152: 0-503: 0-1004: 0-2505: 0-5007: 0-150
OutletGauge30”-0-30 PSIG30”-0-100 PSIG30”-0-200 PSIG0-400 PSIG0-1000 PSIG30”-0-200 PSIG
InletGauge0: None
Assembly/Gauges0: Bare Body1: Standard Assembly
(PSIG/kPa Gauge)2: Standard Assembly
(BAR/PSIG Gauge)4: Cleanroom
Assembly (PSIG/kPa Gauge)
5: Cleanroom Assembly (BAR/PSIG Gauge)
InstalledOptionsS: Stainless
Steel Bonnet
•PanelMountKit(550-0002)•CapturedVentKit(550-0001)
•HeliumLeakCertification(476-0002)•PassivationforFluorineService
InletConnections000: ¼” FPTTF2: ⅛”TubeTF4: ¼” TubeTF6: ⅜”TubeM06: 6mm Tube
OutletAssemblies0: ¼” FPT Port1: ¼” MPT2: ¼” Tube Fitting3: Diaphragm Valve
¼” Tube Fitting4: Diaphragm Valve
¼” MPT5: Needle Valve
¼” MPT6: ⅛”TubeFitting7: ⅜”TubeFitting8: Diaphragm Valve
⅛”TubeFitting9: Diaphragm Valve
¼” FPTM: 6mm Tube FittingS: Diaphragm Valve
6mm Tube Fitting
FLOW RATE - SCFM (LPM) N2
10(283)
40(1133)
35(991)
30(850)
25(708)
20(566)
15(425)
5(142)
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
500(34.5)
450(31)
400(27.6)
350(24.1)
300(20.7)
250(17.2)
200(13.8)
150(10.3)
100(6.9)
50(3.4)
90(6.2)
80(5.5)
70(4.8)
60(4.1)
50(3.4)
40(2.8)
30(2.0)
20(1.4)
10(0.7)
100(6.9)
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
FLOW RATE - SCFM (LPM) N2
10(283)
20(566)
15(425)
5(142)
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
1000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
400 Series Advantage Materials Specifications
Equipment
• Metal-to-metaldiaphragmsealNo possibility of gas contamination
• Capsule®seatIncreased serviceability and life
• 316LstainlesssteeldiaphragmNo inboard diffusion
• OrientablecapturedventcapableSafety in any installation
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• PipeawayreliefvalveSafely vent exhaust gases
• DeliverypressurerangeeasilychangedMaximum flexibility
Description Advanced Features Typical Applications
483 Series high flow, single stage, brass barstock line regulator
BodyBrass barstock
BonnetChrome-plated die cast zinc
SeatPCTFE
Filter40 micron 316L stainless steel
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauge2” diameter brass
Ports½” FPT (inlet/outlet)¼” FPT (gauge/relief valve)
Helium Leak Integrity1 x 10-8 scc/sec
Cv 1.0
Weight (483-3001-TF8)4.79 lbs. (2.17 kg)
• UltraHighFlow
• Bulkgasdistributionsystems
• Gasandliquidchromatography
• Highpuritycarriergases
• Zero,span,andcalibrationgases
• Highpuritychamberpressurization
• Liquefiedhydrocarbongascontrol
• BrassbarstockbodySmoothsurfacefinish
• RearpanelmountableVersatilesystemconfiguration
• Pressureranges0-15to0-250PSIGBroad range of applications
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
The 483 Series regulator applications arewideandvariedincludinghighflowpurging, semiconductor manufacturing, manifold and line regulation.
Equipment
Flow Performance
Ordering Information and Configuration Options
A B C D -Inlet Options
Related Options
FLOW RATE - SCFH (NM3/H) N2
200 PSIG�(INLET PRESSURE)
1000(28.3)
2000�(56.7)
3000�(84.9)
4000�(113.3)
5000�(141.6)
6000�(170)
7000(198.3)
8000�(226.6)
OU
TLE
T P
RE
SS
UR
E P
SIG
(BA
R)
25(1.7)
50(3.4)
75(5.2)
100(6.9)
125(8.6)
150(11.7)
175(12.1)
200(13.8)
225(15.5)
250(17.2) 483 Series High Flow Regulator
2000 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
483Series483
OutletPressure1: 0-152: 0-403: 0-1204: 0-2005: 0-250
OutletGauge0-30 PSIG0-60 PSIG0-200 PSIG0-400 PSIG0-400 PSIG
InletGauge0: None
Assembly/Gauges0: Bare Body1: Standard Assembly
(PSIG/kPa Gauges)
2: Standard Assembly (BAR/PSIG Gauges)
6: Mirror Image Assembly (PSIG/kPa Gauges)
7: Mirror Image Assembly (BAR/PSIG Gauges)
InletConnections000: ½” FPTTF8: ½” TubeM12: 12mm
Tube
OutletAssemblies0: ½” FPT Port1: ½” Tube FittingP: 12mm Tube Fitting
InstalledOptionsNone
None
400 Series Advantage Materials Specifications
Equipment
• Metal-to-metaldiaphragmsealNo possibility of gas contamination
• Capsule®seatIncreased serviceability and life
• 316LstainlesssteeldiaphragmNo inboard diffusion
• OrientablecapturedventcapableSafety in any installation
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• PipeawayreliefvalveSafely vent exhaust gases
• DeliverypressurerangeeasilychangedMaximum flexibility
Description Advanced Features Typical Applications
484 Series high flow, single stage, stainless steel barstock line regulator
Body316L stainless steel barstock
BonnetChrome-plated die cast zinc
SeatPCTFE
Filter40 micron 316L stainless steel
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauge2” diameter stainless steel
Ports½” FPT (inlet/outlet)¼” FPT (gauge/relief valve)
Helium Leak Integrity1 x 10-8 scc/sec
Cv 1.0
Weight (484-3011-TF8)4.52 lbs. (2.05 kg)
• UltraHighFlow
• Bulkgasdistributionsystems
• Gasandliquidchromatography
• Highpuritycarriergases
• Zero,span,andcalibrationgases
• Highpuritychamberpressurization
• Liquefiedhydrocarbongascontrol
• 316LstainlesssteelbarstockbodySmoothsurfacefinish
• RearpanelmountableVersatilesystemconfiguration
• Pressureranges0-15to0-250PSIGBroad range of applications
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
The 484 Series regulator applications arewideandvariedincludinghighflowpurging, semiconductor manufacturing, manifold and line regulation.
Equipment
Flow Performance
Ordering Information and Configuration Options
A B C D -Inlet Options
Related Options
FLOW RATE - SCFH (NM3/H) N2
200 PSIG�(INLET PRESSURE)
OU
TLE
T P
RE
SS
UR
E P
SIG
(BA
R)
25(1.7)
50(3.4)
75(5.2)
100(6.9)
125(8.6)
150(11.7)
175(12.1)
200(13.8)
225(15.5)
250(17.2) 484 Series High Flow Regulator
2000 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
200 PSIG�(INLET PRESSURE)
500 PSIG�(INLET PRESSURE)
2000 PSIG�(INLET PRESSURE)
1000(28.3)
2000�(56.7)
3000�(84.9)
4000�(113.3)
5000�(141.6)
6000�(170)
7000(198.3)
8000�(226.6)
484Series484
OutletPressure1: 0-152: 0-403: 0-1204: 0-2005: 0-250
OutletGauge0-30 PSIG0-60 PSIG0-200 PSIG0-400 PSIG0-400 PSIG
InletGauge0: None
Assembly/Gauges0: Bare Body1: Standard Assembly
(PSIG/kPa Gauges)
2: Standard Assembly (BAR/PSIG Gauges)
InletConnections000: ½” FPTTF8: ½” TubeM12: 12mm
Tube
OutletAssemblies0: ½” FPT Port1: ½” Tube FittingP: 12mm Tube Fitting
InstalledOptionsNone
None
Equipment
400 Series Advantage Materials Specifications• Metal-to-metal diaphragm seal
No possibility of gas contamination
• Capsule® seatIncreased serviceability and life
• 316L stainless steel diaphragmNo inboard diffusion
• OrientablecapturedventcapableSafety in any installation
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• PipeawayreliefvalveSafely vent exhaust gases
• DeliverypressurerangeeasilychangedMaximum flexibility
Description Advanced Features Typical Applications
428 Series single stage, stainless steel barstock line regulator
The 428 Series regulators are intended for secondary pressure control of the highest purity gases or as point of use pressure control in high purity gas distribution systems.
• Semiconductor process gases
• Gasandliquidchromatography
• Ultra-highpuritycarriergases
• Zero,spanandcalibrationgases
• Liquefiedhydrocarbongascontrol
• Controlofcryogenicgases
• Butt-weldedVCR® connectionsHighest leak integrity available
• 316LstainlesssteelbarstockbodyIncreased corrosion resistance
• FrontandrearpanelmountableVersatilesystemconfiguration
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
Body316L stainless steel barstock
BonnetChrome-plated brass barstock
SeatPTFE
Filter10 micron stainless steel multi-layer mesh
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauge2" diameter stainless steel
Ports¼” VCR®
Helium Leak Integrity1 x 10-9 scc/sec
Cv0.1
Weight (428-1302)2.46 lbs. (1.12 kg)
Equipment
Flow Performance
Ordering Information and Configuration Options
Related Options
Option Order No. DescriptionPanel Mount KitCaptured Vent Kit
Helium Leak CertificationSpecial Treatment0.01micronfilter
550-0002550-0001
476-0002
550-0003580-2001
To mount the regulator using bonnet threads. Material: Nickel-plated brass360° orientation for easy piping of vented gases to a safe location in the event of diaphragm failure. Material: Nickel-plated brassInboardHeliumleakcertificationtolessthan1x10-8 scc/sec
Regulatorpreconditionedinactualgasusage(requiredforsomefluoridatedcompounds)Attached at outlet for low particle count gases (with ¼” VCR® connections only)
Series428
Outlet Pressure1: 0-152: 0-303: 0-504: 0-1005: 0-2506: 0-5007: 0-150
Outlet Gauge0: None1: 30"-0-30 PSIG2: 30"-0-60 PSIG3: 30"-0-100 PSIG4: 30"-0-200 PSIG5: 0-400 PSIG6: 0-1000 PSIG
Inlet Gauge0: None
428 A CB DConnections1: FVCR in/MVCR out2: MVCR in/MVCR out3: MVCR in/FVCR out4: FVCR in/FVCR out
FLOW RATE - SCFM (LPM) N2
10(283)
40(1133)
35(991)
30(850)
25(708)
20(566)
15(425)
5(142)
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
500(34.5)
450(31)
400(27.6)
350(24.1)
300(20.7)
250(17.2)
200(13.8)
150(10.3)
100(6.9)
50(3.4)
90(6.2)
80(5.5)
70(4.8)
60(4.1)
50(3.4)
40(2.8)
30(2.0)
20(1.4)
10(0.7)
100(6.9)
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
FLOW RATE - SCFM (LPM) N2
10(283)
20(566)
15(425)
5(142)
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
1000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
Equipment
400 Series Advantage Materials Specifications• Metal-to-metal diaphragm seal
No possibility of gas contamination
• Capsule® seatIncreased serviceability and life
• 316L stainless steel diaphragmNo inboard diffusion
• OrientablecapturedventcapableSafety in any installation
• LowwettedsurfaceareaMinimal purge requirements
• Field-adjustablepressurelimitSafeguard downstream equipment
• PipeawayreliefvalveSafely vent exhaust gases
• DeliverypressurerangeeasilychangedMaximum flexibility
Description Advanced Features Typical Applications
429 Series corrosion resistant, single stage, stainless steel barstock line regulator
The 429 Series regulators are intended for primary pressure control of the highest purity gases or for applications where minorfluctuationsinoutletpressuredueto diminishing inlet supply pressure can be tolerated.
• Semiconductor process gases
• Gasandliquidchromatography
• Ultra-highpuritycarriergases
• Zero,spanandcalibrationgases
• Liquefiedhydrocarbongascontrol
• Controlofcryogenicgases
• Butt-weldedVCR® connectionsHighest leak integrity available
• 316LstainlesssteelbarstockbodyIncreased corrosion resistance
• FrontandrearpanelmountableVersatilesystemconfiguration
• 3000PSIGinletpressureratingSafe use with high pressure cylinders
Body316L stainless steel barstock
BonnetChrome-plated brass barstock
SeatPTFE
Filter10 micron stainless steel multi-layer mesh
Diaphragm316L stainless steel
Internal SealsPTFE
Maximum Inlet Pressure3000 PSIG (210 BAR)
Temperature Range-40°F to 140°F (-40°C to 60°C)
Gauges2" diameter stainless steel
Ports¼” VCR®
Helium Leak Integrity1 x 10-9 scc/sec
Cv0.1
Weight (429-1312)2.73 lbs. (1.24 kg)
Equipment
Flow Performance
Ordering Information and Configuration Options
Related Options
Option Order No. DescriptionPanel Mount KitCaptured Vent Kit
Helium Leak CertificationSpecial Treatment0.01micronfilter
550-0002550-0001
476-0002
550-0003580-2001
To mount the regulator using bonnet threads. Material: Nickel-plated brass360° orientation for easy piping of vented gases to a safe location in the event of diaphragm failure. Material: Nickel-plated brassInboardHeliumleakcertificationtolessthan1x10-8 scc/sec
Regulatorpreconditionedinactualgasusage(requiredforsomefluoridatedcompounds)Attached at outlet for low particle count gases (with ¼” VCR® connections only)
Series429
Outlet Pressure1: 0-152: 0-303: 0-504: 0-1005: 0-2506: 0-5007: 0-150
Outlet Gauge0: None1: 30"-0-30 PSIG2: 30"-0-60 PSIG3: 30"-0-100 PSIG4: 30"-0-200 PSIG5: 0-400 PSIG6: 0-1000 PSIG
Inlet Gauge0: None1: 0-4000 PSIG2: 0-400 PSIG3: 0-1000 PSIG4: 0-3000 PSIG5: 30"-0-200 PSIG6: 30"-0-100 PSIG7: 30"-0-60 PSIG8: 30"-0-30 PSIG
429 A CB DConnections1: FVCR in/MVCR out2: MVCR in/MVCR out3: MVCR in/FVCR out4: FVCR in/FVCR out
FLOW RATE - SCFM (LPM) N2
10(283)
40(1133)
35(991)
30(850)
25(708)
20(566)
15(425)
5(142)
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
500(34.5)
450(31)
400(27.6)
350(24.1)
300(20.7)
250(17.2)
200(13.8)
150(10.3)
100(6.9)
50(3.4)
90(6.2)
80(5.5)
70(4.8)
60(4.1)
50(3.4)
40(2.8)
30(2.0)
20(1.4)
10(0.7)
100(6.9)
OUTL
ET P
RESS
URE
- PSI
G (B
AR)
FLOW RATE - SCFM (LPM) N2
10(283)
20(566)
15(425)
5(142)
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
500 PSIG (35 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
200 PSIG (13.8 BAR)INLET PRESSURE
1000 PSIG (138 BAR)INLET PRESSURE
2000 PSIG (138 BAR)INLET PRESSURE
Equipment
demand flow regulator Series 3950
Ordering InformationModel Description
3951-C103951-6003951-CGA
Demand Flow Regulator with C-10 inlet connectionDemand Flow Regulator with CGA 600 inlet connectionDemand Flow Regulator with selected CGA connection
3952-C103952-CGA
Demand Flow Regulator with C-10 inlet connectionDemand Flow Regulator with selected CGA connection
Materials Specifications
3951 3952 Outlet hose barb for 3/16” ID hose
Flow 0-3 slpm @ 3” of H2O vacuum
Inlet pressure gauge0-3000 psig with GCA connection0-1200 psig with C10 conntection
Bodyclear anodized aluminum
Bonnetclear anodized aluminum
DiaphragmBuna-N
Main valve seatViton®andTeflon®
Inlet Pressure gaugestainless steel case with brass socket
Bodyclear anodized aluminum
Bonnetclear anodized aluminum
DiaphragmViton®
Main valve seatViton®andTeflon®
Inlet Pressure gaugestainless steel case with stainless steel socket
Description FeaturesThis new single stage design using balanced valve stem technology is more sensitive than older two stage technologies providing g better performance even with high inlet pressures. This regulator is designed for use with instruments that use a pump to draw the calibration gas intotheinstrument.The3950seriesdemandflowregulatorprovides the exact amount of calibration gas the instrument pump requires. This simple to use regulator makes calibration quick and easy by eliminating the need for sample bags,flowmeters,orspecialoperatortraining.
•Precisedeliveryofcalibrationgasrequiredbyinstrumentpump.
•Newsinglestagebalancedvalvestemtechnology.
•Simpleeasytouseoperation.
•Variouscylinderconnectionsavailable:C-10,CGA600,other CGAs.
•40microninletfilter.
Equipment
Series 3980 adjustable fixed flow regulator
Ordering InformationModel Description
39813981-CGA*39823982-CGA*
non-corrosive gas regulator with C-10 connectionnon-corrosive gas regulator with standard CGA connection corrosive gas regulator with C-10 connectioncorrosive gas regulator with standard CGA connection
*Specify CGA connection when ordering.
Materials
3981 3982
Bodyclear anodized aluminum
Pistonbrass
Orifice Plateceramic
Main valve seatTeflon®
Piston SealsViton®
Pressure gaugesSS case with brass socket
Bodyclear anodized aluminum
Pistonstainless steel
Orifice Plateceramic
Main valve seatTeflon®
Piston SealsViton®
Pressure gaugesstainless steel
Description FeaturesThe3980seriesprovidesthecontrolofthesinglefixedflowregulatorswiththeadvantageofbeingabletochangeflowrates as required for different applications. This regulatoreliminates the need to have multiple regulators on-site.Commonlycalledthe“click”regulatorithas12flowpositions, OFF, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 5.0, 6.0, 7.0, and 8.0 slpm. There are models suitable for use with non-corrosive gases and mildly corrosive gases.
•12fixedflowsettings.
•0-3000psigcylinderpressuregauge.
•Max.inletpressure3000psig.
•AvailablewithstandardC-10(5/8”-18UNF)orastandard CGA cylinder connection.
•3/16”hosebarboutlet.
•40microninletfilter.