Equinox Offshore

Equinox Offshore Engineering Pte Ltd

April 2009

1

www.equinoxnrg.comEOE-DEV-OTH-09.001 Rev. 0


Accommodation Repair Vessel (ARV)

2 April 2009


• Company incorporated in Singapore.

• Two basic objectives.Two basic objectives.

To provide all engineering support to Equinox Offshore Accommodation Limited in the conversion of ro-ro ferries to accommodation and repair vessels (ARVs) in Singapore.( ) g p

To provide specialized engineering services to the international offshore and shipping industries.

E l t f i li t i l hit t d i• Employs a team of specialist engineers, naval architects and marine managers with background relevant to the design, conversion and operation of offshore vessels including ARVs, FPSO, FSO and other specialized offshore units.

3 April 2009


Our Objectivesj• Commitment to total quality through continuous improvement and teamwork.

• To provide customer satisfaction through excellence in product quality.

• Minimum response time and maximum price competitiveness.

• To remain at the forefront of class and regulatory requirements.

T id i it ( t d li t ffi ) t b id th b t• To provide services on-site (at yard or client offices) to bridge the gap between engineering, project management and construction.

4 April 2009


Engineering Competenciesg g p• Safety and environmental requirements (including water and waste

management)

• Regulatory Class/Flag issues

• Stability and sea keeping

• Mooring arrangements

• Logistics management

• Transport and evacuation

• Interface and systems integration

5 April 2009


Engineering Disciplinesg g p• Naval architecture

• Structures

• Safety

• Machinery systemsy y

• Piping

• Electrical

• Automation

• Instrumentation

6 April 2009


Design and analysis toolsg y• Autodesk INVENTOR 2009

• ANSYS (FEA)( )

• GHS (stability)

• ShipmoPC (sea keeping)p ( p g)

• STEEL (beam analysis)

• PDMS (Piping)

7 April 2009


Work under development (ARV 1)p ( )• Support to commissioning activities;

• Design of new sponsons for compliance with SOLAS damage stability g p p g yrequirements and related studies;

8 April 2009


Work under development (ARV 2)p ( )• Installation design for Helideck including structural analysis• Installation design for 80 ton S.W.L crane

I t ll ti d i f• Installation design for access gangway• Design of new fuel oil and fresh water tanks for increased autonomy• Installation design for bow and aft thrusters

I t ll ti d i f ili i f i d ti• Installation design for new auxiliary engines for increased power generating capacity

• Installation design for new lifeboats and davitsAccommodation re arrangement and upgrading• Accommodation re-arrangement and upgrading

• Electrical and Instrument fitting design• P & ID for piping.

9 April 2009


Future Developmentsp• Further improvement of capabilities in sea keeping and mooring analysis with

acquisition of new tools and training of personnel

• Admission of new experts to expand the scope of competencies

• Full implementation and certification of the Quality Management System according to ISO 9001-2008according to ISO 9001 2008

10 April 2009


Services• Project management

• Shipyard evaluationpy

• Basic ship design (hull, machinery & systems and electricity)

• Classification drawingsg

• Detailed design and drawings (in all disciplines)

• Stability calculations (intact and damage) according to several Codes

• Inclining tests

• Motion response studies

11 April 2009


Services (cont.)( )• Fire protection, control and safety plans

• Structural design and analysisg y

• Process and instrument diagrams

• Purchase order specifications (in all disciplines)p ( p )

• Approval/checking of vendor’s drawing according to Client specifications and regulatory requirements

• Technical support to the Client from preliminary specification to commissioning

12 April 2009


Management Organization Chart

QUALITY MANAGER

GENERAL MANAGERRodrigo Araujo

PROJECT ADMINISTRATORLynn Rahman

ENGINEERING COORD.Aslam Abubakar

QUALITY MANAGERGuy Robertson

ADMINISTRATIVE SUPPORT

NAVAL ARCHITECTURE & STRUCTURAL SECTIONMuhammad Yusuf

PIPING & MACHINERY SYSTEMS SECTIONAli Bin Mohamad

ELECTRICITY & INSTRUMENT SECTION

Roque Burlasa

13 April 2009


Key Personnel

14 April 2009


Rodrigo Araujo (General Manager):

• Naval Architect;

• 2008 – Bureau Veritas, Marine Manager for Portugal;

• 2005/08 Bureau Veritas Technical and New Buildings Manager for Portugal (Plan• 2005/08 – Bureau Veritas, Technical and New Buildings Manager for Portugal (Plan approval, Certification and New Building surveys);

• 2000/05 – RINAVE, Head of New Buildings Department (Plan approval, Certification, New Building surveys and Notified Bodies coordinator);

• 1991/2000 – RINAVE, ships in service and new buildings surveyor, plan approval surveyor;

• 1987/91 – Lisbon Technical University, teacher in the Naval Architecture degree;

• 1985/87 – Arsenal do Alfeite, engineer at Shipbuilding Division;

• 1982/85 – NAUTIS, ship design engineer.

15 April 2009


Rodrigo Araujo (General Manager):

Specific competencies:

• Class and statutory regulatory issues;

• Deep knowledge of the classification and statutory certification process;• Deep knowledge of the classification and statutory certification process;

• Ship design;

• Stability (intact and damage according to several codes);

• Ships and marine structures;

• ISO 9001 Quality Management Systems.

16 April 2009


Aslam Abubakar (Engineering Coordinator):

• Naval Architect;

• 2008 – Nortech FPSO Pte Ltd, Naval architect and Owner’s representative at the Design and Engineering Department;

• 2005/07 – Malaysia Marine and Heavy Engineering Sdn Bhd, Naval architect at Marine Conversion Division;

• 2004/05 – PT. Jan Sanjaya Pusaka, Structural engineer/design engineer at Shipbuilding Division;

• 2003/04 - PT. Jan Sanjaya Pusaka, Project engineer, Project Management Team

17 April 2009


Aslam Abubakar (Engineering Coordinator):

Specific competencies:

• Stability;

• Ships and marine structures analysis FEA;• Ships and marine structures analysis - FEA;

• Mooring systems;

• Experience with FPSO, FSO and several other types of vessels (work and commercial);

• Project management;

• Purchase Technical Specifications;

• Detail design and construction drawings;

• ISO 9001 Quality Management Systems.

18 April 2009


Ali Bin Mohamad (leader of Piping and Machinery Section)

• Extensive experience in piping design for offshore platforms and rigs, petrochemical plants and chemical plants;

• Pipe routing and layout design for drilling rigs, ships and industrial installations;

• Good knowledge of Design Engineering Standards

• Good knowledge of analysis software such as PDMS, CAD WORD..

• Good knowledge of shipbuilding and offshore piping software such as TRIBON M1 M2• Good knowledge of shipbuilding and offshore piping software such as TRIBON M1, M2 and M3.

• Project Management software (MICROSOFT PROJECT);

• Familiar with material and welding codes and standard;• Familiar with material and welding codes and standard;

• Familiar with Class rules and Statutory regulations.

19 April 2009


Roque Burlasa (leader of Electricity and Instrumentation Section)

• Electrical Engineer;Electrical Engineer;

• Many years of experience on electrical, control & instrumentation design, and electrical outfitting design;

• Large experience electrical ship design for different types of vessels (bulk carrier, carLarge experience electrical ship design for different types of vessels (bulk carrier, car carrier, tanker, heavy lift pipe lay, semi-submersible rig, drill ship and FPSO).

• Familiar with classification rules, statutory regulations and other codes and standards;

20 April 2009


Muhammad Yusuf (leader of Structural Section)

• Naval architect;Naval architect;

• Good knowledge of Design Engineering Standards

• Good knowledge of analysis software such as ANSYS 11, MSC NASTRAN, STAAD PRO and SAP 2000.and SAP 2000.

• Good knowledge of shipbuilding and offshore structure software such as TRIBON M1, M2 and M3.

• Good knowledge of CNC software for steel processing.Good knowledge of CNC software for steel processing.

• Project Management software (MICROSOFT PROJECT and PRIMAVERA);

• Familiar with material and welding codes and standard;

F ili ith Cl l d St t t l ti• Familiar with Class rules and Statutory regulations.

21 April 2009


Contacts:EQUINOX OFFSHORE ENGINEERING Pte Ltd

112 Robinson Road #10-03

Singapore 068902

Phone: (65) 6750 8890Fax.: (65) 6750 1864Email: [email protected]

URL: http://www.equinoxnrg.comp q g

Contact person: Rodrigo Araujo, General Manager

22 April 2009

Equinox Offshore

Documents

Transcript of Equinox Offshore