EpiSensor Product Catalogepisensor.com/wp-content/uploads/2012/11/EpiSensor... · ·...
Transcript of EpiSensor Product Catalogepisensor.com/wp-content/uploads/2012/11/EpiSensor... · ·...
ESD-001-01
© EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Product Catalog
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
ESD-001-01
01
03
06
08
10
13
15
17
19
21
Table of Contents
NGR-30 Gateway
ZEM-61 Wireless 3-Phase Electricity Monitor
ZEM-30 Wireless Single Phase Electricity Monitor
TES-11 / HTS-10 Wireless Temperature / Humidity Sensor
TES-21 / TES-22 Wireless Probe Temperature Sensor
ZIO-20 Wireless 4 - 20mA Current Loop Sensor
ZVO-20 Wireless 0 - 10V Voltage Signal Monitor
ZPC-10 / ZPC-20 Wireless Pulse Counter
ZHM-10 Wireless Heat Metering Kit
RTO-21 Wireless Range Extender
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
01
ESD-001-00
Data Sheet : NGR-30 Gateway
• Built-in web browser• Easy to use interface• Remote software upgrade capability• Many Data Export Options (CSV, JSON, XML)• Reliable Embedded Operating System• Ethernet• 3G Cellular Modem (optional)• ® Wireless Communications• Industrial temperature range• Dimensions: 67mm x 100mm x 27mm• Fanless industrial enclosure• Wall mounting bracket
FEATURES
EpiSensor’s NGR-30 Gateway manages networks of EpiSensor wireless nodes and provides users with an intuitive web interface to quickly and easily deploy the wireless monitoring system. From this interface, various types of data export can be configured to push energy data to 3rd party energy management software for analysis.
The NGR-30 is an embedded industrial computer with redundancy and reliability at its core. The Gateway allows users to configure and commission all EpiSensor wireless monitoring products.
INTRODUCTION
Nodes List Add Nodes Home
Shown above: NGR-30 Gateway web interface accessed from a laptop.
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
02
ESD-001-01
[ NGR-30 Gateway - Specification]
WAN Connectivity Gigabit Ethernet via RJ-45
2G / 3G Cellular, UMTS / GPRS / EDGE / HSPA
2.4GHz Zigbee RadioZigbee
Cellular
Ethernet
System Intel Atom 600MHz
1GB
4GB (approx. 50% available for data storage)Storage
RAM
Processor
Embedded LinuxOperating System
Certification CE, FCC, IEC (see user guide for more information)
S3IKM2M800FCC ID
Certification
Physical 67 x 100 x 27 mm (not including antennas)
0.36kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
SteelEnclosure0°C to +50°C
Up to 80% (non-condensing)Operating Humidity
Operating Temperature
Zigbee ® Specification Zigbee™ Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
128-bit AES EncryptionEncryption (Sensor Network)
Up to 50m
Up to 300m (direct line of sight)Outdoor Range (Sensor Network)
Indoor Range (Sensor Network)
Data Export push via (S)FTP / local storage
push via HTTP(S) / local storage
push via HTTP(S) / local storageXML
JSON
CSV
SQL inserts to GFT via HTTPSGoogle Fusion Tables
Ordering Codes Ethernet
Ethernet + 3G Cellular ModemNGR-30-2
NGR-30-1
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
03
ESD-001-00
Data Sheet : ZEM-61 : Wireless 3-Phase Electricity Monitor
The ZEM-61 Wireless 3-Phase Electricity Monitor is suitable for monitoring energy usage in a wide range of commercial and industrial environments.
It can be used to monitor manufacturing lines, HVAC equipment, distribution panels, 3-phase machines, main incomers or any other 3-phase loads in retail environments, hotels, leisure centres, data centres, pharmaceutical and medical device manufacturing plants, food processing plants, brewing plants or any other commercial buildings. The ZEM-61 can also be used to monitor micro-generators such as wind turbines, CHP systems and PV arrays.
APPLICATIONS
The ZEM-61 is a highly accurate, wireless 3-phase electricity monitor. It can monitor energy consumption patterns in equipment and buildings remotely via the NGR-30 Gateway. This provides facility and energy managers with targeted energy consumption information essential for increasing efficiency and reducing overall power consumption.
The ZEM-61 can be configured with a range of CT’s and Rogowski coils to measure currents from 0.1A to 3kA per phase. A list of CT options is available on the back of this data sheet.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Wide Voltage Input Range (75V to 265V)
• Wide Current Measurement Range: 0.1A to 3kA
• Class 1 Accuracy, +/- 1% or better
• Clip-on CT’s are included and pre-calibrated
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Reports kWh, PF, V, I, kVA & more per phase
• On-board logging, up to 10,000 data points
• Dimensions (LxWxH) 192mm x 128mm x 40mm
• Self-healing mesh network
• Relays data from other wireless nodes
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
04
ESD-001-01
[ ZEM-61 Wireless 3-Phase Electricity Monitor - Specification]
Current 0.1 - 3kA + (Range of Current Sensors Available)
+/- 1%
0.1ACurrent Resolution
Current Accuracy
Current Measurement Range
kWh, PF, kVAh +/- 1%
0.01 kWh
+/- 1%Power Factor Accuracy
kWh Resolution
kWh Accuracy
1%
+/- 1%
0.01 kVAhkVAh Resolution
kVAh Accuracy
Power Factor Resolution
Certification CE
Class 1Metering Standard
Certification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 192 x 128 x 40 mm
0.35kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP67 ratedEnclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range
Indoor Range
Voltage 75V - 265V, Three Phase AC, 50/60Hz
+/- 1%
0.1 VoltVoltage Resolution
Voltage Accuracy
Input Voltage Range
75V - 470V ACVoltage Measurement Range
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
05
ESD-001-01
CT Option 2 ZEM-61-300-2m
1A - 300A
360AMax. Continuous Current
Current Range
Product Code
24mmAperture Diameter
Rogowski Coil Option 1 ZEM-61-r1k-120c
10A - 1000A
1100AMax. Continuous Current
Current Range
Product Code
120mmAperture Diameter
Rogowski Coil Option 2 ZEM-61-r3k-120c
30A - 3000A
3100AMax. Continuous Current
Current Range
Product Code
120mmAperture Diameter
Please note some CT cable lengths can be specified. Refer to the price list for more information. If custom CT’s are required, please contact [email protected]
CT Option 3 ZEM-61-600-2m
6A - 600A
650AMax. Continuous Current
Current Range
Product Code
36mmAperture Diameter
CT Option 1 ZEM-61-120-2m
0.1A - 120A
200AMax. Continuous Current
Current Range
Product Code
16mmAperture Diameter
ZEM-61-120-2m ZEM-61-300-2m[120A, 16mm] [300A, 24mm]
ZEM-61-600-2m[600A, 36mm]
ZEM-61-rXk-120c[see below]
[ ZEM-61 Wireless 3-Phase Electricity Monitor - CT Options]
Ordering Codes 120A CT’s
300A CT’s
600A CT’sZEM-61-600-2m
ZEM-61-300-2m
ZEM-61-120-2m
1000A Rogowski CoilsZEM-61-r1k-120c
ZEM-61-r3k-120c 3000A Rogowski Coils
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
06
ESD-001-00
Data Sheet : ZEM-30 : Wireless Single Phase Electricity Monitor
The ZEM-30 is suitable for monitoring power consumption in light machinery, single phase equipment or small commercial buildings. It can be used to monitor lighting circuits, HVAC systems, boilers, telecoms equipment, servers, kitchen equipment, hotel rooms, trade show stands, commercial & residential buildings or any other single phase load up to 300A. There is also a 10A in-line version available with C13/14 plug and socket. The ZEM-30 can also be used for monitoring renewable energy sources such as wind turbines and PV arrays or for monitoring electric vehicle charging in homes or public charging stations.
APPLICATIONS
The ZEM-30 is a highly accurate, wireless single-phase electricity monitor. It can monitor energy consumption patterns in equipment and buildings remotely via the NGR-30 Gateway, which provides building and energy managers with energy consumption information essential for increasing efficiency, reducing overall power consumption and monitoring usage patterns.
The ZEM-30 has on-board wireless communications for easy installation and minimum disruption to normal operations and is housed in a waterproof polycarbonate enclosure.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Wide Voltage Input Range (75V to 265V)
• Wide Current Measurement Range: 0.1A to 300A
• Class 1 Accuracy, +/- 1% or better
• Clip-on CT’s are included and pre-calibrated
• In-line version with internal 10A CT available
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Reports kWh, PF, V, I & more
• On-board logging, up to 10,000 data points
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• Relays data from other wireless nodes
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
07
ESD-001-01
Voltage / Current 75V - 265V AC, 50/60Hz
+/- 1%
0.1 VoltVoltage Resolution
Voltage Accuracy
Input Voltage Range
0.1 - 300A
+/- 1%
0.1ACurrent Resolution
Current Accuracy
Current Measurement Range
kWh, PF, kVAh +/- 1%
0.01 kWh
+/- 1%Power Factor Accuracy
kWh Resolution
kWh Accuracy
1%
+/- 1%
0.01 kVAhkVAh Resolution
kVAh Accuracy
Power Factor Resolution
Certification CE
Class 1Metering Standard
Certification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
0.35kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP67 ratedEnclosure
-40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range
Indoor Range
[ ZEM-30 Wireless Single Phase Electricity Monitor - Specification]
IEC C13 / C14 Plug & Socket on ZEM-30i
Ordering Codes 80A CT
120A CT
10A In-Line CTZEM-30-10i
ZEM-30-120-2m
ZEM-30-80-2m
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
08
ESD-001-00
Data Sheet : TES-11 / HTS-10 : Wireless Temperature / Humidity Sensor
The TES-11 and HTS-10 are designed for remotely monitoring temperature and humidity for environmental monitoring and energy management applications.
These products are designed for monitoring ambient temperature and relative humidity in a wide variety of environments such as warehouses, clean rooms, pharmaceutical manufacturing plants, residential or commercial buildings, data centres, hotels, offices and in manufacturing processes that require temperature or humidity controlled environments.
APPLICATIONS
The TES-11 is a fully wireless, accurate ambient temperature sensor which can record temperature data at predefined intervals and make this data available via EpiSensor’s NGR-30 Gateway. The unit has on-board wireless communications and is housed in a vented ABS enclosure. The HTS-10 version also includes a relative humidity sensor.
At 30 minute reporting intervals, the battery can last up to 10 years under normal conditions. The enclosure measures just 71mm x 71mm x 27mm and can be wall mounted using keyhole slots or sticky pads.
INTRODUCTION
FEATURES
• Easy to Install and Commission - stick on / wall mountable
• Accurate Temperature Sensor: +/- 0.2°C
• Wide Temperature Range: -20°C to + 60°C
• Relative Humidity Accuracy: +/- 3% (normal range)
• Battery Life > 10 years (30 min reporting interval)
• On-board data logging: up to 10,000 data points
• Vented ABS Plastic Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxWxH) 71mm x 71mm x 27mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
09
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 71 x 71 x 27 mm
150g
Wall Mounting HolesMounting
Weight
Dimensions (LxWxH)
ABS Plastic, VentedEnclosure-40°C to +85°C
up to 100% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range
Indoor Range
Battery up to 10 years (30 min reporting interval)
Lithium Thionyl Chloride (permanent)Type
Lifetime
[ TES-11 / HTS-10 Wireless Temperature / Humidity Sensor - Specification ]
Humidity (HTS-10 only) 0% RH - 100% RH
+/- 3% RH
2% RHHysteresis
RH Accuracy (normal range)
Full Humidity Range
+/- 0.5% RHRepeatability
11% RH - 89% RHNormal Humidity Range
0.1%Humidity Resolution
-20°C - +60°C
-40°C - +85°C
+/- 0.2°CTemp. Accuracy (normal range)
Full Temperature Range
Normal Temperature Range
+/- 0.4°C
0.1°CTemperature Resolution
Temp. Accuracy (full range)
Temperature
Ordering Codes Temperature
Temperature & HumidityHTS-10
TES-11
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
10
ESD-001-00
Data Sheet : TES-21 / TES-22 : Wireless Probe Temperature Sensor
The TES-21 can be used for monitoring probe temperature in pharmaceutical & manufacturing plants, data centers, food processing and brewing industries, hotels, offices and for any manufacturing processes that require temperature controlled environments.
The dual probe version is particularly useful for monitoring temperature in liquids or in areas where a temperature differential is of interest, such as the inlet and exhaust air temperature in a server cabinet or the flow and return temperatures in heating and cooling systems.
APPLICATIONS
The TES-21 is a fully wireless, accurate probe temperature sensor which can record temperature data at predefined intervals and make this data available to users via EpiSensor’s NGR-30 Gateway for use in environmental monitoring and energy management applications. There are single and dual probe versions available (dual probe: TES-22)
The temperature sensor is housed in a waterproof polycarbonate enclosure so it can be deployed in a wide range of harsh environments and the on-board lithium battery is designed to last up to 10 years (at 30 min reporting interval).
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Accurate Temperature Sensor: +/- 0.2°C
• Wide Temperature Range: -20°C to + 60°C
• Various temperature probes available
• Battery Life > 10 years (30 min reporting interval)
• On-board data logging: up to 10,000 data points
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
11
ESD-001-01
Sensor [depends on probe used, see probe options]
[depends on probe used, see probe options]
+/- 0.2°CAccuracy (normal range)
Full Temperature Range
Normal Temperature Range
+/- 0.4°C
0.1°CTemperature Resolution
Accuracy (full range)
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
150g
Wall Mounting HolesMounting
Weight
Dimensions (LxWxH)
Polycarbonate, Waterproof (IP67)Enclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range
Indoor Range
Battery up to 10 years (30 min reporting interval)
Lithium Thionyl Chloride (permanent)Type
Lifetime
[ TES-21 / TES-22 Wireless Probe Temperature Sensor - Specification ]
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
12
ESD-001-01
Option 1 TES-21-w1.5
Waterproof, Plastic, 1.5m length
Liquids, pharmaceuticals, warehousesApplication
Type
Product Code
-20°C - +60°CNormal Temperature Range
-40°C - +85°CFull Temperature Range
Option 2 TES-21-w0
Waterproof, Plastic, Short Probe
-20°C - +60°CNormal Temperature Range
Type
Product Code
-40°C - +85°CFull Temperature Range
Outdoor ambient temperature monitoringApplication
Option 3 TES-21-p2.0
Stainless Steel, Pipe Probe, 2.0m length
-20°C - +60°CNormal Temperature Range
Type
Product Code
-40°C - +85°CFull Temperature Range
Pipe temperature monitoring Application
Probe Option 1[Waterproof, Plastic,
1.5m length]
Probe Option 2[Waterproof, Plastic,
Short Probe]
Probe Option 3[Stainless Steel, Pipe Probe, 2.0m length]
[ TES-21 / TES-22 Wireless Probe Temperature Sensor - Probe Options ]
Option 4 TES-22-w1.5
Dual Waterproof, Plastic, 1.5m length
-20°C - +60°CNormal Temperature Range
Type
Product Code
-40°C - +85°CFull Temperature Range
Liquids, pharmaceuticals, data centers, weatherApplication
Option 5 TES-22-p2.0
Dual Stainless Steel, Pipe Probe, 2.0m length
-20°C - +60°CNormal Temperature Range
Type
Product Code
-40°C - +85°CFull Temperature Range
Pipe temperature differential monitoringApplication
Probe Option 4[Dual Waterproof, Plastic,
1.5m length]
Probe Option 5[Dual Stainless Steel,
Pipe Probe, 2.0m length]
Ordering Codes Single Waterproof, Plastic, 1.5m length
Single Waterproof, Plastic, Short Probe
Single Stainless Steel, Pipe Probe, 2.0m lengthTES-21-p2.0
TES-21-w0
TES-21-w1.5
Dual Waterproof, Plastic, 1.5m lengthTES-22-w1.5
Dual Stainless Steel, Pipe Probe, 2.0m lengthTES-22-p2.0
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
13
ESD-001-00
Data Sheet : ZIO-20 : Wireless 4-20mA Current Loop Sensor
The ZIO-20 can be used to monitor a wide range of analog parameters that relate either directly or indirectly to energy usage in commercial and industrial buildings.
An example of indirect energy usage would be to monitor flow rates in a compressed air line; if a high flow rate is maintained outside of production hours this could indicate a leak in the system, or incorrect configuration of the control system. An example of direct energy monitoring via analog current loop would be tracking the level of fuel oil in a tank.
APPLICATIONS
EpiSensor’s ZIO-20 is a rugged, wireless mains powered analog current loop monitor. It can be used to monitor flow rates, pressures, levels, pH or any other energy related output which uses the industry standard 4 - 20mA current loop.
The ZIO-20 has a reliable on-board mains power supply and secure wireless Zigbee™ mesh communications for easy installation and minimum disruption to normal operations. The unit is housed in a waterproof polycarbonate enclosure and has a wireless range of up to 300m outdoors.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Accuracy of +/- 2%
• Current Range: 4mA - 20mA
• Voltage Range: 0 - 3V
• Low power consumption: ~ 1.1W
• On-board data logging: up to 10,000 data points
• Max, Min, Average and Instantaneous sensors
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
Change Photo
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
14
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
0.35kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP67 ratedEnclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range Extension
Indoor Range Extension
Supply Voltage 75V - 265V AC, 50/60Hz
1.1WPower Consumption
Input Voltage Range
[ ZIO-20 Current Loop Sensor - Specification ]
Ordering Code Wireless 4-20mA Current Loop SensorZIO-20
Current Loop 4 - 20mA
0 - 3V
+/- 2%Accuracy
Voltage Range
Current Range
50mAMax. Current
Min, Max, Average, InstantaneousSensors
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
15
ESD-001-00
Data Sheet : ZVO-20 : Wireless 0 - 10V Voltage Signal Monitor
The ZVO-20 can be used to monitor a wide range of analog parameters that relate either directly or indirectly to energy usage in commercial and industrial buildings.
An example of indirect energy usage would be to monitor flow rates in a compressed air line; if a high flow rate is maintained outside of production hours this could indicate a leak in the system, or incorrect configuration of the control system. An example of direct energy monitoring via 0 - 10V voltage signal would be tracking the level of fuel oil in a tank.
APPLICATIONS
EpiSensor’s ZVO-20 is a rugged, wireless mains powered voltage signal monitor. It can be used to monitor flow rates, pressures, levels, pH or any other energy related output which uses the industry standard 0 - 10V signal.
The ZVO-20 has a reliable on-board mains power supply and secure wireless Zigbee™ mesh communications for easy installation and minimum disruption to normal operations. The unit is housed in a waterproof polycarbonate enclosure and has a wireless range of up to 300m outdoors.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Accuracy of +/- 2%
• Voltage Range: 0 - 10V
• Low power consumption: ~ 1.1W
• On-board data logging: up to 10,000 data points
• Max, Min, Average and Instantaneous sensors
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
Change Photo
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
16
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
0.35kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP67 ratedEnclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range Extension
Indoor Range Extension
Mains PSU Voltage 75V - 265V AC, 50/60Hz
1.1WPower Consumption
Input Voltage Range
Ordering Code Wireless 0 - 10V Voltage Signal MonitorZVO-20
Voltage Sensor 0 - 10V
+/- 2%
12VMax. Voltage
Accuracy
Voltage Range
75mAMax. Current
Min, Max, Average, InstantaneousSensors
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
17
ESD-001-00
Data Sheet : ZPC-10 / ZPC-20 : Wireless Pulse Counter
The ZPC is designed for situations where a legacy utility meter exists and retrofit of additional metering equipment is difficult or unnecessary.
In data centers or manufacturing plants, facility managers may not be able to disconnect an electricity or gas supply, but may have access to a pulse output from existing meters. The ZPC is an extremely rugged, cost effective and easy-to-deploy solution for monitoring legacy utility meters within commercial and industrial buildings.
Battery Powered: ZPC-10 / Mains Powered: ZPC-20
APPLICATIONS
The ZPC is a wireless battery powered pulse counter used to interface to electricity, water and natural gas utility meters. The unit has on-board Zigbee™ wireless communications and is housed in a waterproof polycarbonate enclosure.
Pulse readings are reported to the NGR-30 Gateway at a configurable interval. Large networks of ZPC’s can connect to the Gateway and deliver data to a central location for detailed analysis of energy and water consumption data. If wireless communications break down, up to 10,000 data will be logged automatically.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Mains powered and battery powered versions
• Pulse frequency up to 4Hz (battery) / 30Hz (mains)
• Battery Life up to 10 years (subject to pulse frequency and reporting interval)
• On-board data logging: up to 10,000 data points
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
Change Photo
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
18
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
150g
Wall Mounting HolesMounting
Weight
Dimensions (LxWxH)
Polycarbonate, Waterproof (IP67)Enclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range
Indoor Range
Battery (ZPC-10 only) up to 10 years, 30min reporting interval
Lithium Thionyl Chloride (permanent)Type
Lifetime
Pulse Input Single Channel
4 Hz (battery) / 30 Hz (mains)
10 mSMin. Pulse Length
Max. Pulse Frequency
Channels
5 V
0.01 VMin. Pulse Voltage
Max. Pulse Voltage
[ ZPC-10 / ZPC-20 Wireless Pulse Counter - Specification ]
Ordering Code Battery Powered Wireless Pulse CounterZPC-10
Mains Powered Wireless Pulse CounterZPC-20
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
19
ESD-001-00
Data Sheet : ZHM-10 : Wireless Heat Metering Kit
The ZHM-10 provides energy managers with essential information to control energy usage and costs of HVAC equipment in commercial and industrial buildings. The information reported can be used to calculate the efficiency of boilers, the coefficient of performance (CoP) of chillers or simply for energy accounting purposes to assign cost to a process or an area. The ZHM-10 heat metering kit is easy to deploy and will automatically join the wireless mesh network. The unit is mains powered and has a wide voltage input range.
APPLICATIONS
The ZHM-10 Heat Metering Kit consists of a flow meter, two temperature probes, heat calculator and a wireless interface to seamlessly integrate with EpiSensor’s NGR-30 Gateway to monitor heating or cooling. When the heat calculator has been programmed with the liquid type (usually water) it monitors a temperature differential and the flow rate to calculate the total heating or cooling action in a circuit. The unit is housed in a waterproof enclosure, is mains powered and includes on-board fully wireless communications based on the Zigbee standard.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Measures kWh, Flow T, Return T, ∆ T
• Various flow meter and temperature probe options
• On-board data logging: up to 10,000 data points
• Waterproof Enclosure
• Fully Wireless Communications
• Wireless Range up to 300m (LoS)
• Dimensions (LxW) 144 x 112 mm, & 112 x 90mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
Change Photo
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
20
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 mm, & 112 x 90mm
2kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP65 ratedEnclosure
Operating Conditions +5°C to +55°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range Extension
Indoor Range Extension
[ ZHM-10 - Wireless Heat Metering Kit Specification ]
Heat Meter kWh, Flow T, Return T, ∆ T
12Hz
40mSMin. Flow Meter Pulse Length
Max. Flow Meter Pulse Frequency
Parameters Measured
0°C to +190°CTemp. Measurement Range
PT-100 or PT-500
< 3VPulse Input Voltage
Temperature Sensor Type
3µAPulse Input Current
Ordering Code Heat Metering Kit w/ Unico DN20 flow meterZHM-10
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
21
ESD-001-00
Data Sheet : RTO-21 : Wireless Range Extender
The RTO-21 is perfect for connecting wireless nodes which have been deployed at the extremities of large buildings, back to a Gateway which would otherwise be out of wireless range.
Many RTO-21’s can be used in a chain to extend the wireless sensor network to even greater distances.
Increasing the number of range extenders also improves the strength and reliability of the mesh network by providing redundant paths for nodes to link to the Gateway.
APPLICATIONS
The RTO-21 Range Extender can increase the range of a wireless sensor network by up to 300m. Data is automatically routed from wireless nodes in a mesh network through the range extender and back to the NGR-30 Gateway.
It includes an internal mains power supply which is designed to work over a wide range of voltages and on-board Zigbee wireless communications.
The RTO-21’s enclosure is fully waterproof, which is ideal for use in harsh industrial or outdoor environments.
INTRODUCTION
FEATURES
• Easy to Install and Commission
• Extend Wireless Range by up to 300m (LoS)
• Routes data from other wireless nodes
• Integrated mains power supply
• Wide voltage input range
• Waterproof Polycarbonate Enclosure
• Fully Wireless Communications
• Dimensions (LxWxH) 144mm x 112mm x 35mm
• Self-healing mesh network
• 2.4GHz ISM band Zigbee® Wireless radio
• Fully secure communications: 128-bit AES encryption
• Over-the-air software upgrade capability
Change Photo
EpiSensor, Georges Quay, Limerick, Ireland.Tel: +353-61-512 500 | Fax: +353-61-512 509
Email: [email protected] | Web: www.episensor.com
Page
22
ESD-001-01
Certification CECertification
Wireless Technology Zigbee® Pro
2.4 Ghz ISM Band
16 Channels (11 - 26)Channels
Radio Frequency
Radio Technology
+3dBm (+5dBm in Boost Mode)
-98dBm @ 1% Packet Error Rate
up to 250 kbits/secData Rate
Rx Sensitivity
Max Tx Power
Security 128-bit AES EncryptionEncryption
Physical 144 x 112 x 35 mm
0.35kg
Wall Mounting FlangesMounting
Weight
Dimensions (LxWxH)
Polycarbonate Plastic, IP67 ratedEnclosure
Operating Conditions -40°C to +85°C
up to 80% (non-condensing)Operating Humidity
Operating Temperature
Wireless Range up to 50m
up to 300m (direct line of sight)Outdoor Range Extension
Indoor Range Extension
Supply Voltage 75V - 265V AC, 50/60Hz
1.1WPower Consumption
Input Voltage Range
[ RTO-21 Wireless Range Extender - Specification ]
Ordering Code Wireless Range Extender (omni-directional)RTO-21