SASIGARAN MONEYAM THILAGA RAVINTHAR. 1. NP + be + NP 2. NP + be + AdjP 3. NP + be + PrepP.
EPIC CONNECTORS - Viewmoldviewmold.com/Products/EPIC connector/EPIC connector...10.0210 NP 10.0120...
Transcript of EPIC CONNECTORS - Viewmoldviewmold.com/Products/EPIC connector/EPIC connector...10.0210 NP 10.0120...
The HBE series inserts are suitable for applications with high voltages and current. The inserts can be terminated in a variety ofways: screw, crimp, or “spring” cageclamp.
These inserts fit into the HBESeries housings which are standard with fixed levers.
EPIC® CONNECTORSHBE Series
271877-799-5277 • www.lappcanada.com
HBE 6 Series 276
HBE 10 Series 281
HBE 16 Series 291
HBE 24 Series 301
HBE 32 Series 311
HBE 48 Series 315
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE Inserts: Technical Data
272 877-799-5277 • www.lappcanada.com
Copper alloy, silver platedCopper alloy, silver plated/ gold platedCopper alloy, silver plated100 (higher mating cycles depending on the application)
<2 mOhm<2 mOhm1.5 - 4 mOhm
AWG20 - 1420 - 1220 - 14
Number of Contacts:
Screw Termination & Crimp Termination:Rated Voltage:
Rated Current:
Temperature Range:
Cage Clamp:Rated Voltage:
Rated Current
Pollution Level:Dimensioning Transient:
Termination Type:Screw Termination:Crimp Termination:Cage Clamp Termination:
Contacts:Screw Termination:Crimp Termination:Cage Clamp TerminationMating Cycles:
Contact Resistance:Screw Termination:Crimp Termination:Cage Clamp termination:
mm2
0.5 - 2.5 mm2
0.5 - 4.0 mm2
0.5 - 2.5 mm2
6, 10, 16, 24, 32, 48 (+PE)
VDE: 500V EPIC® HBE 6 - 48 UL: 600V EPIC® HBE 6 - 48CSA: 600V EPIC® HBE 6 - 48
VDE: 16A EPIC® HBE 6 - 48 UL: 16A EPIC® HBE 6 - 48CSA: 16A EPIC® HBE 6 - 48
-40°C to 125°C
VDE: 500V EPIC® HBE 6 - 48 UL: 600V EPIC® HBE 6 - 48CSA: 600V EPIC® HBE 6 - 48VDE: 16A EPIC® HBE 6 - 48 UL: 16A EPIC® HBE 6 - 48CSA: 16A EPIC® HBE 6 - 4836 kV
HBE 6 Panel Mount BaseHBE 6 Surface Mount & Cable Coupler HoodHBE 10 Panel Mount BaseHBE 10 Surface Mount & Cable Coupler HoodHBE 16 Panel Mount BaseHBE 16 Surface Mount & Cable Coupler HoodHBE 24 Panel Mount BaseHBE 24 Surface Mount & Cable Coupler Hood
PG/NPT70.350070.352070.350170.352170.350270.352270.350370.3523
Metric79.350079.352079.350179.352179.350279.352279.350379.3523
TECHNICAL DATA
Please note that terminal block inserts are available. Please see website.
For Panel Mount BaseFor Surface Mount Base& Cable Coupler Hood
EMC PROTECTION
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE Series
273877-799-5277 • www.lappcanada.com
HBE SCREW TERMINATED:1.5 mm2 (16 AWG)
HBE SCREW TERMINATED: 2.5 mm2 (14 AWG)
HBE CRIMP TERMINATED: 1.5 mm2 (16 AWG)
HBE CRIMP TERMINATED: 2.5 mm2 (14 AWG)
HBE CAGE CLAMP: 2.5 mm2 (14 AWG)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
Ambient Temperature (°C)
Wo
rkin
g C
urr
ent
(A)
HBE CAGE CLAMP:1.5 mm2 (16 AWG)
HBE INSERTS: DERATING CURVES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE Housings: Technical Data
Specifications:Temperature Range:Protection class:Material:
HBE 6 - 48 EP: Environmentally Protected: aluminum alloy, powder coated (black), locking levers and bolts madeof stainless steel.
For industrial applications in extremely demanding environments with aggressive atmospheres.
DIN 43652-40°C to +125°CNEMA 4, IP65 HBE 6 - 48: aluminum alloy, powder coated
PG NPT METRIC
HBE 6- 48: aluminum alloy, powder coated (grey), locking levers and bolts made of zinc plated steel.
For industrial applications in demanding environments.
PG NPT METRIC
STANDARD GREY COATING (NEMA 4)
EP BLACK COATING (NEMA 4X)
274 877-799-5277 • www.lappcanada.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE Panel Cut-Outs for Panel Mount Bases
877-799-5277 • www.lappcanada.com
Fits the following plugs & receptacles: HBE 6, HDD 24, HEE 10, and 2 Module Frames.
Fits the following plugs & receptacles: HBE 10,HBVE 3, HDD 42, HEE 18 and 3 Module Frames.
Fits the following plugs & receptacles: HBE 16, HBS 6, HBVE 6, HD 40,HDD 72, HEE 32, 5 Module Frames, 4 Pwr/0 Sgl, and 4 Pwr/2 Sgl.
Fits the following plugs & receptacles: HBE 24, HBVE 10, HD 64, HDD 108, HEE 46, 7 Module Frame, and 4 Pwr/8 Sgl.
Fits the following plugs & receptacles: HBE 32, HBS12, HD 80, HDD 144, HEE 64, and 10 Module Frames.
Fits the following plugs & receptacles: HBE 48, HD128, HDD 216, HEE 92, and 14 Module Frames.
All dimensions are in mm.
275
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 6 Plugs & Receptacles
276 877-799-5277 • www.lappcanada.com
SCREW TERMINATED View from Cable Side
Panel Cut-Out(Insert Only)
Panel Cut-Out(Insert Only)
Contacts Sold Separately
All dimensions are in mm.
All dimensionsare in mm.
These inserts fit in the HBE 6 Series
Housings.
Same View from Cable Side as Screw & Crimp Termination
These inserts fit in the HBE 6 Series
Housings.
CrimpContacts areon the next
page.
CRIMP TERMINATED
SCREWLESS SPRING CAGE CLAMP INSERTS
SCREW & CRIMP TERMINATED INSERTS
Screw Terminated with wire protectionScrew Terminated without wire protectionCrimp Terminated: Machine
Plug Receptacle10.190010.190110.1800
10.191010.191110.1810
Screwless Cage ClampPlug Receptacle
10.4000 10.4010
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
277877-799-5277 • www.lappcanada.com
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
MACHINED CONTACTS: DIAMETER 2.5 MM2
Marking Track
View from Cable Side
All dimensions are in mm.
One terminal block insertmates with one screw
terminated insert.
These terminal blockinserts only fit in HBE 6
panel mount bases
SCREW TERMINATED TERMINAL BLOCK INSERTS
Terminal Block: Right GroundTerminal Block: Left Ground
Receptacle70.311170.3101
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 6 Housings: Single Lever on Base
278 877-799-5277 • www.lappcanada.com
Top Entry
Side Entry
PG13.516
13.516
NPT1/2”1/2”1/2”1/2”
Metric20252025
PGPart #
10.011010.021010.012010.0220
NPTPart #
10.0110 NP10.0210 NP10.0120 NP10.0220 NP
MetricPart #
19.011019.021019.012019.0220
PGPart #
70.021670.021070.023670.0230
NPTPart #
70.0216 NP70.0210 NP70.0236 NP70.0230 NP
MetricPart #
79.021679.021079.023679.0230
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.020270.020470.022270.0224
NPTPart #
70.0202 NP70.0204 NP70.0222 NP70.0224 NP
MetricPart #
79.020279.020479.022279.0224
PGPart #
70.021270.021470.023270.0234
NPTPart #
70.0212 NP70.0214 NP70.0232 NP70.0234 NP
MetricPart #
79.021279.021479.023279.0234
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
TOP ENTRY SIDE ENTRY
Top Entry metric hoods do not come with a neck.
Top Entry metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
All dimensions are in mm.
HIGH PROFILE HOODS
HOODS
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 6 Housings: Single Lever on Base
279877-799-5277 • www.lappcanada.com
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Standard Grey Coating10.003010.0040
Black Coating (EP)70.002570.0045
Dust cover with single lever and gasket for HBE 6 HoodsDust cover with single lever bolts for HBE 6 Panel Mount orSurface Mount Base/ Cable Coupler Hood
Part #10.016510.0150
All dimensions are in mm.
All dimensions are in mm.
SURFACE MOUNT BASES
PANEL MOUNT BASES
DUST COVERS WITH ATTACHMENT STRING
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG16-
16-
16-
16-
NPT1/2”
-1/2”
-1/2”
-1/2”
-
Metric2025202520252025
PGPart #
10.0060-
10.0050-
10.0090-
10.0070-
MetricPart #
19.006079.006619.005079.005619.009079.016619.007079.0156
PGPart #
70.0080-
70.0070-
70.0180-
70.0170-
NPTPart #
70.0080 NP-
70.0070 NP-
70.0180 NP-
70.0170 NP-
MetricPart #
79.008079.008679.007079.007679.018079.018679.017079.0176
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries NPT
Part #10.0060 NP
-10.0050 NP
-10.0090 NP
-10.0070 NP
-
Material: Thermoplastic Resin Temperature: -40°C to 125°C
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 6 Housings: Single Lever on Base
280 877-799-5277 • www.lappcanada.com
STANDARD PROFILE HIGH PROFILE
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2129212921292129
NPT3/4”1”
3/4”1”
3/4”1”
3/4”1”
Metric2532253225322532
PGPart #
70.006270.006470.005270.005470.016270.016470.015270.0154
NPTPart #
70.0062 NP70.0064 NP70.0052 NP70.0054 NP70.0162 NP70.0164 NP70.0152 NP70.0154 NP
MetricPart #
79.006279.006479.005279.005479.016279.016479.015279.0154
PGPart #
70.008270.008470.007270.007470.018270.018470.017270.0174
NPTPart #
70.0082 NP70.0084 NP70.0072 NP70.0074 NP70.0182 NP70.0184 NP70.0172 NP70.0174 NP
MetricPart #
79.008279.008479.007279.007479.018279.018479.017279.0174
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
StandardProfileHigh Profile
PG13.5162129
NPT1/2”1/2”3/4”1”
Metric20252532
PGPart #
10.014010.024070.010270.0104
NPTPart #
10.0140 NP10.0240 NP70.0102 NP70.0104 NP
MetricPart #
19.014019.024079.010279.0104
PGPart #
-70.011070.011270.0114
NPTPart #
-70.0110 NP70.0112 NP70.0114 NP
MetricPart #
79.011079.011679.011279.0114
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
Cable coupler metric hoods do not come with a neck.
All dimensions are in mm.
CABLE COUPLER HOODS
HIGH PROFILE SURFACE MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
281877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Plugs & Receptacles
SCREW TERMINATEDView from Cable Side
Panel Cut-Out(Insert Only)
Panel Cut-Out
Same View fromCable Side as
Screw & CrimpTermination
Contacts Sold Separately
All dimensions are in mm.
All dimensions are in mm.
These inserts fit in the HBE 10
Series Housings.
CrimpContacts areon the next
page.
These insertsfit in the HBE
10 SeriesHousings.
CRIMP TERMINATED
SCREWLESS SPRING CAGE CLAMP INSERTS
SCREW & CRIMP TERMINATED INSERTS
Screw Terminated: with wire protectionScrew Terminated: without wire protectionCrimp Terminated: Machine
Plug Receptacle10.192010.192110.1820
10.193010.193110.1830
Screwless Cage ClampPlug Receptacle
10.4001 10.4011
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
View from Cable Side
All dimensions are in mm.
One terminal block insertmates with one screw
terminated insert.
These terminal blockinserts only fit in HBE 10
panel mount basesTerminal Block: Left Ground
Receptacle70.3121
SCREW TERMINATED TERMINAL BLOCK INSERTS
MACHINED CONTACTS: DIAMETER 2.5 MM2
Marking Track
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
282
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
283877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Single Lever on Base
TOP ENTRY SIDE ENTRY
Top Entry
Side Entry
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
10.040910.040710.042910.0428
NPTPart #
10.0409 NP10.0407 NP10.0429 NP10.0428 NP
MetricPart #
19.040919.040719.042919.0428
PGPart #
70.049070.049670.059070.0596
NPTPart #
70.0490 NP70.0496 NP70.0590 NP70.0596 NP
MetricPart #
79.049079.049679.059079.0596
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Metric hoods do not come with a neck.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.044270.044470.054270.0544
NPTPart #
70.0442 NP70.0444 NP70.0542 NP70.0544 NP
MetricPart #
79.044279.044479.054279.0544
PGPart #
70.049270.049470.059270.0594
NPTPart #
70.0492 NP70.0494 NP70.0592 NP70.0594 NP
MetricPart #
79.049279.049479.059279.0594
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
HIGH PROFILE HOODS
HOODS
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
284 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Single Lever on Base
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Standard Grey Coating10.032910.0339
Black Coating (EP)70.032770.0337
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG16
162116
16
NPT1/2”
1/2”3/4”1/2”
1/2”
Metric2025202520252025
PGPart #
10.0359-
10.034910.034710.0389
-10.0369
-
NPTPart #
10.0359 NP-
10.0349 NP10.0347 NP10.0389 NP
-10.0369 NP
-
MetricPart #
19.035979.061619.034919.034719.038979.065619.036979.0646
PGPart #
70.0630-
70.0620-
70.0670-
70.0660-
NPTPart #
70.0630 NP-
70.0620 NP-
70.0670 NP-
70.0660 NP-
MetricPart #
79.063079.063679.062079.062679.067079.067679.066079.0666
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
All dimensions are in mm.
All dimensions are in mm.
SURFACE MOUNT BASES
Part #10.048610.0487
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with single lever for HBE 10 HoodsDust cover with single lever bolts for HBE 10 Panel Mount orSurface Mount Base/ Cable Coupler Hood
PANEL MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
285877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Single Lever on Base
All dimensions are in mm.
STANDARD PROFILE HIGH PROFILE
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2129212921292129
NPT3/4”1”
3/4”1”
3/4”1”
3/4”1”
Metric2532253225322532
PGPart #
70.061270.061470.060270.060470.065270.065470.064270.0644
NPTPart #
70.0612 NP70.0614 NP70.0602 NP70.0604 NP70.0652 NP70.0654 NP70.0642 NP70.0644 NP
MetricPart #
79.061279.061479.060279.060479.065279.065479.064279.0644
PGPart #
70.063270.063470.062270.062470.067270.067470.066270.0664
NPTPart #
70.0632 NP70.0634 NP70.0622 NP70.0624 NP70.0672 NP70.0674 NP70.0662 NP70.0664 NP
MetricPart #
79.063279.063479.062279.062479.067279.067479.066279.0664
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
Metric hoods do not come with a neck.
StandardProfileHigh Profile
PG16212129
NPT1/2”3/4”3/4”1”
Metric20252532
PGPart #
10.046970.042270.042470.0426
NPTPart #
10.0469 NP70.0422 NP70.0424 NP70.0426 NP
MetricPart #
19.046979.042279.042479.0426
PGPart #
70.043070.043270.043470.0436
NPTPart #
70.0430 NP70.0432 NP70.0434 NP70.0436 NP
MetricPart #
79.043079.043279.043479.0436
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
HIGH PROFILE SURFACE MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 10 Housings: Double Levers on Base
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
TOP ENTRY SIDE ENTRY
Top Entry
Side Entry
PG16211621
NPT1/2”3/4”1/2”3/4”
Metric20252025
PGPart #
10.040010.040110.042010.0421
NPTPart #
10.0400 NP10.0401 NP10.0420 NP10.0421 NP
MetricPart #
19.040019.040119.042019.0421
PGPart #
70.051070.051270.053070.0532
NPTPart #
70.0510 NP70.0512 NP70.0530 NP70.0532 NP
MetricPart #
79.051079.051279.053079.0532
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.050470.050670.052470.0526
NPTPart #
70.0504 NP70.0506 NP70.0524 NP70.0526 NP
MetricPart #
79.050479.050679.052479.0526
PGPart #
70.051470.051670.053470.0536
NPTPart #
70.0514 NP70.0516 NP70.0534 NP70.0536 NP
MetricPart #
79.051479.051679.053479.0536
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
HOODS
286 877-799-5277 • www.lappcanada.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
287877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Double Levers on Base
All dimensions are in mm.
All dimensions are in mm.
Standard Grey Coating10.0320
Black Coating (EP)70.0325
2 Entries without cover1 Entry without cover
PG16-
16-
NPT1/2”
-1/2”
-
Metric20252025
PGPart #
10.0350-
10.0340-
MetricPart #
19.035019.035119.034019.0341
PGPart #
70.0380-
70.0370-
NPTPart #
70.0380 NP-
70.0370 NP-
MetricPart #
79.038079.038679.037079.0376
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
SURFACE MOUNT BASES
NPTPart #
10.0350 NP-
10.0340 NP-
PANEL MOUNT BASES
Part #10.048510.0470
10.0471
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with double levers and gasket for HBE 10 HoodsDust cover with double lever bolts for HBE 10 Panel Mount orSurface Mount Base/ Cable Coupler HoodDust cover with double lever bolts and gasket for HBE 10 Hoods
DescriptionPanel Mount without Dust Cover
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
288 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Double Levers on Base
STANDARD PROFILE HIGH PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensionsare in mm.
StandardProfileHigh Profile
PG16212129
NPT1/2”3/4”3/4”1”
Metric20252532
PGPart #
10.046070.040270.040470.0406
NPTPart #
10.0460 NP70.0402 NP70.0404 NP70.0406 NP
MetricPart #
19.046079.040279.040479.0406
PGPart #
70.041070.041270.041470.0416
MetricPart #
79.041079.041279.041479.0416
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
2 Entries without cover1 Entry without cover
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.036270.036470.035270.0354
NPTPart #
70.0362 NP70.0364 NP70.0352 NP70.0354 NP
MetricPart #
79.036279.036479.035279.0354
PGPart #
70.038270.038470.037270.0374
NPTPart #
70.0382 NP70.0384 NP70.0372 NP70.0374 NP
MetricPart #
79.038279.038479.037279.0374
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
CABLE COUPLER HOODS
NPTPart #
70.0410 NP70.0412 NP70.0414 NP70.0416 NP
HIGH PROFILE SURFACE MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
289877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Double Levers on Hood
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.055270.055470.057270.0574
NPTPart #
70.0552 NP70.0554 NP70.0572 NP70.0574 NP
MetricPart #
79.055279.055479.057279.0574
PGPart #
70.056270.056470.058270.0584
NPTPart #
70.0562 NP70.0564 NP70.0582 NP70.0584 NP
MetricPart #
79.056279.056479.058279.0584
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
Top Entry
Side Entry
PG16-
16-
NPT1/2”
-1/2”
-
Metric20252025
PGPart #
10.0410-
10.0450-
MetricPart #
19.041079.055719.045079.0577
PGPart #
70.0560-
70.0580-
NPTPart #
70.0560 NP-
70.0580 NP-
MetricPart #
79.056079.056679.058079.0586
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry NPT
Part #10.0410 NP
-10.0450 NP
-
HOODS
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
290 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 10 Housings: Double Levers on Hood
STANDARD PROFILE HIGH PROFILE
All dimensions are in mm.
All dimensions are in mm.
HIGH PROFILE
STANDARD PROFILE
2 Entries withDust Cover1 Entry withDust Cover
PG16-
16-
NPT1/2”
-1/2”
-
Metric20252025
PGPart #
10.0380-
10.0360-
MetricPart #
19.038079.046619.036019.0361
PGPart #
70.0480-
70.0470-
NPTPart #
70.0480 NP-
70.0470 NP-
MetricPart #
79.048079.048679.047079.0476
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
2 Entries withDust Cover1 Entry withDust Cover
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.046270.046470.045270.0454
NPTPart #
70.0462 NP70.0464 NP70.0452 NP70.0454 NP
MetricPart #
79.046279.046479.045279.0454
PGPart #
70.048270.048470.047270.0474
NPTPart #
70.0482 NP70.0484 NP70.0472 NP70.0474 NP
MetricPart #
79.048279.048479.047279.0474
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
NPTPart #
10.0380 NP-
10.0360 NP-
SURFACE MOUNT BASES
PANEL MOUNT BASES
Standard Grey Coating10.0330
Black Coating (EP)70.0335
DescriptionPanel Mount with Dust Cover
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
291877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Plugs & Receptacles
SCREW & CRIMP TERMINATED INSERTS
CRIMP TERMINATEDView from Cable Side
Panel Cut-Out(Insert Only)
Same View fromCable Side as
Screw & CrimpTermination
Contacts Sold Separately
All dimensions are in mm.
All dimensions are in mm.
These inserts fit in the HBE 16
Series Housings.
These inserts fit in the HBE
16 SeriesHousings.
CrimpContacts areon the next
page.
SCREW TERMINATED
SCREWLESS SPRING CAGE CLAMP INSERTS
Screw Terminated: with wire protectionScrew Terminated: without wire protectionCrimp Terminated: Machine
Plug Receptacle10.194010.194110.1840
10.195010.195110.1850
Screwless Cage ClampPlug Receptacle
10.4002 10.4012
Panel Cut-Out(Insert Only)
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
View from Cable Side
All dimensions are in mm.
One terminal block insertmates with one screw
terminated insert.
These terminal blockinserts only fit in HBE 16
panel mount bases
SCREW TERMINATED TERMINAL BLOCK INSERTS
Terminal Block: Right GroundTerminal Block: Left Ground
Receptacle70.315170.3141
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
MACHINED CONTACTS: DIAMETER 2.5 MM2
Marking Track
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
292
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
293877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Single Lever on Base
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.080910.090910.082910.0929
NPTPart #
10.0809 NP10.0909 NP10.0829 NP10.0929 NP
MetricPart #
19.080919.090919.082919.0929
PGPart #
70.0990-
70.1090-
NPTPart #
70.0990 NP-
70.1090 NP-
MetricPart #
79.0990-
79.1090-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG2129-
2129-
NPT3/4”1”-
3/4”1”-
Metric253240253240
PGPart #
70.094270.0944
-70.104270.1044
-
MetricPart #
79.094279.094479.094679.104279.104479.1048
PGPart #
70.099270.0994
-70.109270.1094
-
NPTPart #
70.0992 NP70.0994 NP
-70.1092 NP70.1094 NP
-
MetricPart #
79.099279.0994
-79.109279.1094
-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
70.0942 NP70.0944 NP
-70.1042 NP70.1044 NP
-
HOODS
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
294 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Single Lever on Base
All dimensions are in mm.
All dimensions are in mm.
SURFACE MOUNT BASES
2 Entries1 Entry2 Entries withdust cover1 Entry withdust cover
PG212121-
21-
NPT3/4”3/4”3/4”
-3/4”
-
Metric252525-
25-
PGPart #
10.075910.074910.0789
-10.0769
-
NPTPart #
10.0759 NP10.0749 NP10.0789 NP
-10.0769 NP
-
MetricPart #
19.075919.074919.0789
-19.0769
-
PGPart #
70.113070.112070.1170
-70.1160
-
MetricPart #
79.113079.112079.1170
-79.1160
-
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries NPT
Part #70.1130 NP70.1120 NP70.1170 NP
-70.1160 NP
-
PANEL MOUNT BASES
Part #10.088610.0887
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with single lever for HBE 16 HoodsDust cover with single lever bolts for HBE 16 Panel Mount orSurface Mount Base/ Cable Coupler Hood
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Standard Grey Coating10.072910.0739
Black Coating (EP)70.082770.0837
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
295877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Single Lever on Base
STANDARD PROFILE HIGH PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2129212921292129
NPT3/4”1”
3/4”1”
3/4”1”
3/4”1”
Metric2532253225322532
PGPart #
70.111270.111470.110270.110470.115270.115470.114270.1144
MetricPart #
79.111279.111479.110279.110479.115279.115479.114279.1144
PGPart #
70.113270.113470.112270.112470.117270.117470.116270.1164
NPTPart #
70.1132 NP70.1134 NP70.1122 NP70.1124 NP70.1172 NP70.1174 NP70.1162 NP70.1164 NP
MetricPart #
79.113279.113479.112279.112479.117279.117479.116279.1164
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
StandardProfileHigh Profile
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.086910.096970.092270.0924
NPTPart #
10.0869 NP10.0969 NP70.0922 NP70.0924 NP
MetricPart #
19.086919.096979.092279.0924
PGPart #
70.0930-
70.093270.0934
MetricPart #
79.0930-
79.093279.0934
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
NPTPart #
70.1112 NP70.1114 NP70.1102 NP70.1104 NP70.1152 NP70.1154 NP70.1142 NP70.1144 NP
NPTPart #
70.0930 NP-
70.0932 NP70.0934 NP
HIGH PROFILE SURFACE MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
296 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Double Levers on Base
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.080010.090010.082010.0920
MetricPart #
19.080019.090019.082019.0920
PGPart #
70.1010-
70.1030-
NPTPart #
70.1010 NP-
70.1030 NP-
MetricPart #
79.1010-
79.1030-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
10.0800 NP10.0900 NP10.0820 NP10.0920 NP
HOODS
Top Entry
Side Entry
PG2129-
2129-
NPT3/4”1”-
3/4”1”-
Metric253240253240
PGPart #
70.100270.1004
-70.102270.1024
-
MetricPart #
79.100279.100479.100879.102279.102479.1028
PGPart #
70.101270.1014
-70.103270.1034
-
NPTPart #
70.1012 NP70.1014 NP
-70.1032 NP70.1034 NP
-
MetricPart #
79.101279.1014
-79.103279.1034
-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry NPT
Part #70.1002 NP70.1004 NP
-70.1022 NP70.1024 NP
-
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
297877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Double Levers on Base
All dimensions are in mm.
All dimensions are in mm.
2 Entries1 Entry
PG2121
NPT3/4”3/4”
Metric2525
PGPart #
10.075010.0740
MetricPart #
19.075019.0740
PGPart #
70.088070.0870
MetricPart #
79.088079.0870
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
SURFACE MOUNT BASES
NPTPart #
10.0750 NP10.0740 NP
NPTPart #
70.0880 NP70.0870 NP
PANEL MOUNT BASES
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with double levers and gasket for HBE 16 HoodsDust cover with double lever bolts for HBE 16 Panel Mount orSurface Mount Base/ Cable Coupler Hood
Part #10.088510.0870
Standard Grey Coating10.0720
Black Coating (EP)70.0825
DescriptionPanel Mount without Dust Cover
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
298 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Double Levers on Base
HIGH PROFILESTANDARD PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
2 Entries
1 Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.086270.086470.085270.0854
MetricPart #
79.086279.086479.085279.0854
PGPart #
70.088270.088470.087270.0874
NPTPart #
70.0882 NP70.0884 NP70.0872 NP70.0874 NP
MetricPart #
79.088279.088479.087279.0874
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
StandardProfileHigh Profile
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.086010.096070.090270.0904
NPTPart #
10.0860 NP10.0960 NP70.0902 NP70.0904 NP
MetricPart #
19.0860-
79.090279.0904
PGPart #
70.0910-
70.091270.0914
MetricPart #
79.0910-
79.091279.0914
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
NPTPart #
70.0862 NP70.0864 NP70.0852 NP70.0854 NP
CABLE COUPLER HOODS
NPTPart #
70.0910 NP-
70.0912 NP70.0914 NP
HIGH PROFILE SURFACE MOUNT BASES
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
299877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Double Levers on Hood
TOP ENTRY SIDE ENTRY
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.081010.091010.083010.0930
NPTPart #
10.0810 NP10.0910 NP10.0830 NP10.0930 NP
MetricPart #
19.081019.091019.083019.0930
PGPart #
70.1060-
70.1080-
NPTPart #
70.1060 NP-
70.1080 NP-
MetricPart #
79.1060-
79.1080-
Size of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.105270.105470.107270.1074
MetricPart #
79.105279.105479.107279.1074
PGPart #
70.106270.106470.108270.1084
MetricPart #
79.106279.106479.108279.1084
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
70.1052 NP70.1054 NP70.1072 NP70.1074 NP
NPTPart #
70.1062 NP70.1064 NP70.1082 NP70.1084 NP
HOODS
Standard Grey Coating
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
300 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 16 Housings: Double Levers on Hood
All dimensions are in mm.
All dimensions are in mm.
HIGH PROFILESTANDARD PROFILE
2 Entries1 EntryHigh Profilewith 2 EntriesHigh Profilewith 1 Entry
PG212121292129
NPT3/4”3/4”3/4”1”
3/4”1”
Metric252525322532
PGPart #
70.096010.076070.096270.096470.095270.0954
MetricPart #
79.096019.076079.096279.096479.095279.0954
PGPart #
70.098070.097070.098270.098470.097270.0974
MetricPart #
79.098079.097079.098279.098479.097279.0974
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
SURFACE MOUNT BASES
NPTPart #
70.0960 NP10.0760 NP70.0962 NP70.0964 NP70.0952 NP70.0954 NP
NPTPart #
70.0980 NP70.0970 NP70.0982 NP70.0984 NP70.0972 NP70.0974 NP
PANEL MOUNT BASES
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with double lever bolts and gasket for HBE 16 HoodsPart #
10.0871
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Standard Grey Coating10.073110.0730
Black Coating (EP)-
70.0835
WITH DUST COVER
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
301877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Plugs & Receptacles
SCREW TERMINATED CRIMP TERMINATEDView from Cable Side
Panel Cut-Out(Insert Only)
Panel Cut-Out(Insert Only)
Same View fromCable Side as
Screw & CrimpTermination
Contacts Sold Separately
All dimensions are in mm.
All dimensions are in mm.
These inserts fit in the HBE 24
Series Housings.
These inserts fit in the HBE
24 SeriesHousings.
CrimpContacts areon the next
page.
SCREWLESS SPRING CAGE CLAMP INSERTS
SCREW & CRIMP TERMINATED INSERTS
Screw Terminated: with wire protectionScrew Terminated: without wire protectionCrimp Terminated: Machine
Plug Receptacle10.196010.196110.1860
10.197010.197110.1870
Screwless Cage ClampPlug Receptacle
10.4003 10.4013
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
View from Cable Side
All dimensions are in mm.
One terminal block insertmates with one screw
terminated insert.
These terminal blockinserts only fit in HBE 24
panel mount bases
SCREW TERMINATED TERMINAL BLOCK INSERTS
Terminal Block: Right GroundTerminal Block: Left Ground
Receptacle70.317170.3161
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
MACHINED CONTACTS: DIAMETER 2.5 MM2
Marking Track
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
302
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
303877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Single Lever on Base
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
SIDE ENTRYTOP ENTRY
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.121910.111910.113910.1239
MetricPart #
19.121919.111919.113919.1239
PGPart #
70.149070.149270.159070.1592
MetricPart #
79.149079.149279.159079.1592
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
10.1219 NP10.1119 NP10.1139 NP10.1239 NP
NPTPart #
70.1490 NP70.1492 NP70.1590 NP70.1592 NP
HOODS
Top Entry
Side Entry
PG2129-
2129-
NPT3/4”1”-
3/4”1”-
Metric253240253240
PGPart #
70.144470.1446
-70.154470.1546
-
MetricPart #
79.144479.144679.144879.154479.154679.1548
PGPart #
70.149470.1496
-70.159470.1596
-
NPTPart #
70.1494 NP70.1496 NP
-70.1594 NP70.1596 NP
-
MetricPart #
79.149479.1496
-79.159479.1596
-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry NPT
Part #70.1444 NP70.1446 NP
-70.1544 NP70.1546 NP
-
Metric hoods do not come with a neck.
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Single Lever on Base
All dimensions are in mm.
All dimensions are in mm.
2 Entries1 Entry2 with cover1 with cover
PG21212121
NPT3/4”3/4”3/4”3/4”
Metric25252525
PGPart #
10.105910.104910.109910.1079
MetricPart #
19.105919.104919.109919.1079
PGPart #
70.163070.162070.167070.1660
MetricPart #
79.163079.162079.167079.1660
Standard Grey CoatingSize of Entry Black Coating (EP)# ofEntries
SURFACE MOUNT BASES
NPTPart #
10.1059 NP10.1049 NP10.1099 NP10.1079 NP
NPTPart #
70.1630 NP70.1620 NP70.1670 NP70.1660 NP
PANEL MOUNT BASES
Part #10.118610.1187
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with single lever for HBE 24 HoodsDust cover with single lever bolts for HBE 24 Panel Mount orSurface MountBase/ Cable Coupler Hood
DescriptionPanel Mount without Dust CoverPanel Mount with Dust Cover
Standard Grey Coating10.102910.1039
Black Coating (EP)70.132770.1337
304
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 24 Housings: Single Lever on Base
Metric hoods do not come with a neck.
HIGH PROFILESTANDARD PROFILE
All dimensions are in mm.
All dimensions are in mm.
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2129212921292129
NPT3/4”1”
3/4”1”
3/4”1”
3/4”1”
Metric2532253225322532
PGPart #
70.161270.161470.160270.160470.165270.165470.164270.1644
MetricPart #
79.161279.161479.160279.160479.165279.165479.164279.1644
PGPart #
70.163270.163470.162270.162470.167270.167470.166270.1664
NPTPart #
70.1632 NP70.1634 NP70.1622 NP70.1624 NP70.1672 NP70.1674 NP70.1662 NP70.1664 NP
MetricPart #
79.163279.163479.162279.162479.167279.167479.166279.1664
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
StandardProfileHigh Profile
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.127910.117970.142470.1426
MetricPart #
19.127919.117979.142479.1426
PGPart #
70.143070.143270.143470.1436
NPTPart #
70.1430 NP70.1432 NP70.1434 NP70.1436 NP
MetricPart #
79.143079.143279.143479.1436
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
NPTPart #
70.1612 NP70.1614 NP70.1602 NP70.1604 NP70.1652 NP70.1654 NP70.1642 NP70.1644 NP
NPTPart #
10.1279 NP10.1179 NP70.1424 NP70.1426 NP
SURFACE MOUNT BASES
877-799-5277 • www.lappcanada.com 305
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 24 Housings: Double Levers on Base
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
TOP ENTRY SIDE ENTRY
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.121010.111010.113010.1230
NPTPart #
10.1210 NP10.1110 NP10.1130 NP10.1230 NP
MetricPart #
19.121019.111019.113019.1230
PGPart #
70.151070.151270.153070.1532
MetricPart #
79.151079.151279.153079.1532
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
70.1510 NP70.1512 NP70.1530 NP70.1532 NP
HOODS
Top Entry
Side Entry
PG2129-
2129-
NPT3/4”1”-
3/4”1”-
Metric253240253240
PGPart #
70.150470.1506
-70.152470.1526
MetricPart #
79.150479.150679.150879.152479.152679.1528
PGPart #
70.151470.1516
-70.153470.1536
-
NPTPart #
70.1514 NP70.1516 NP
-70.1534 NP70.1536 NP
-
MetricPart #
79.151479.1516
-79.153479.1536
-
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry NPT
Part #70.1504 NP70.1506 NP
-70.1524 NP70.1526 NP
877-799-5277 • www.lappcanada.com306
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
307877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Double Levers on Base
All dimensions are in mm.
All dimensions are in mm.
2 Entries1 Entry
PG2121
NPT3/4”3/4”
Metric2525
PGPart #
10.105010.1040
MetricPart #
19.105019.1040
PGPart #
70.138070.1370
NPTPart #
70.1380 NP70.1370 NP
MetricPart #
79.138079.1370
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
SURFACE MOUNT BASES
NPTPart #
10.1050 NP10.1040 NP
PANEL MOUNT BASES
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with double levers and gasket for HBE 24 HoodsDust cover with double lever bolts for HBE 24 Panel Mount orSurface Mount Base/ Cable Coupler Hood
Part #10.119510.1180
Standard Grey Coating10.1020
Black Coating (EP)70.1325
DescriptionPanel Mount without Dust Cover
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Double Levers on Base
STANDARD PROFILE HIGH PROFILE
Metric hoods do not come with a neck.
All dimensions are in mm.
All dimensions are in mm.
2 Entries
1 Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.136270.136470.135270.1354
NPTPart #
70.1362 NP70.1364 NP70.1352 NP70.1354 NP
MetricPart #
79.136279.136479.135279.1354
PGPart #
70.138270.138470.137270.1374
MetricPart #
79.138279.138479.137279.1374
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
StandardProfileHigh Profile
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.127010.117070.140470.1406
MetricPart #
19.127019.117079.140479.1406
PGPart #
70.141070.141270.141470.1416
MetricPart #
79.141079.141279.141479.1416
Standard Grey CoatingSize of Entry Black Coating (EP)Profile
CABLE COUPLER HOODS
NPTPart #
70.1382 NP70.1384 NP70.1372 NP70.1374 NP
NPTPart #
10.1270 NP10.1170 NP70.1404 NP70.1406 NP
NPTPart #
70.1410 NP70.1412 NP70.1414 NP70.1416 NP
HIGH PROFILE SURFACE MOUNT BASES
308
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
309877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Double Levers on Hood
TOP ENTRY SIDE ENTRY
Metric hoods do not come with a neck.
Metric hoods do not come with a neck.
TOP ENTRY SIDE ENTRY
All dimensions are in mm.
All dimensions are in mm.
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
10.122010.112010.114010.1240
NPTPart #
10.1220 NP10.1120 NP10.1140 NP10.1240 NP
MetricPart #
19.122019.112019.114019.1240
PGPart #
70.156070.156270.158070.1582
MetricPart #
79.156079.156279.158079.1582
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric25322532
PGPart #
70.155470.155670.157470.1576
MetricPart #
79.155479.155679.157479.1576
PGPart #
70.156470.156670.158470.1586
MetricPart #
79.156479.156679.158479.1586
Standard Grey CoatingSize of Entry Black Coating (EP)Position ofCable Entry
HIGH PROFILE HOODS
NPTPart #
70.1560 NP70.1562 NP70.1580 NP70.1582 NP
NPTPart #
70.1554 NP70.1556 NP70.1574 NP70.1576 NP
NPTPart #
70.1564 NP70.1566 NP70.1584 NP70.1586 NP
HOODS
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
310 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 24 Housings: Double Levers on Hood
STANDARD PROFILE HIGH PROFILE
All dimensions are in mm.
All dimensions are in mm.
2 Entries1 EntryHigh Profilewith 2 EntriesHigh Profilewith 1 Entry
PG212121292129
NPT3/4”3/4”3/4”1”
3/4”1”
Metric253225322532
PGPart #
10.109010.107070.146270.146470.145270.1454
MetricPart #
19.109019.107079.146279.146479.145279.1454
PGPart #
70.148070.147070.148270.148470.147270.1474
NPTPart #
70.1480 NP70.1470 NP70.1482 NP70.1484 NP70.1472 NP70.1474 NP
MetricPart #
79.148079.147079.148279.148479.147279.1474
Standard Grey CoatingSize of Entry Black Coating (EP)# of Entries
SURFACE MOUNT BASES
NPTPart #
10.1090 NP10.1070 NP70.1462 NP70.1464 NP70.1452 NP70.1454 NP
PANEL MOUNT BASES
Material: Thermoplastic Resin Temperature: -40°C to 125°C
DUST COVERS WITH ATTACHMENT STRING
Dust cover with double lever bolts and gasket for HBE 24 HoodsPart #
10.1181
DescriptionPanel Mount with Dust CoverPanel Mount without Dust Cover
Standard Grey Coating10.103010.1031
Black Coating (EP)70.1335
-
WITH DUST COVER
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
311877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 32 Plugs & Receptacles
SCREW TERMINATED CRIMP TERMINATEDView from Cable Side
Panel Cut-Out(Insert Only)
Panel Cut-Out
Same View fromCable Side as
Screw & CrimpTermination
Contacts Sold Separately
All dimensions are in mm.
All dimensions are in mm.
These insertsfit in the HBE
32 SeriesHousings.
CrimpContacts
are on thenext page.
These inserts fit in the HBE
32 SeriesHousings.
SCREWLESS SPRING CAGE CLAMP INSERTS
SCREW & CRIMP TERMINATED INSERTS
Screw Terminated with wire protection (#1-16)Screw Terminated with wire protection (#17-32)Screw Terminated without wire protection (#1-16)Screw Terminated without wire protection (#17-32)Crimp Terminated: Machine (#1-16)Crimp Terminated: Machine (#17-32)
Plug Receptacle10.194010.202010.194110.202110.184010.1842
10.195010.203010.195110.203110.185010.1852
Screwless Cage Clamp (#1-16)Screwless Cage Clamp (#17-32)
Plug Receptacle10.400210.4004
10.401210.4014
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
312 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
HBE MACHINE CONTACTS: DIAMETER 2.5 MM
Marking Track
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
877-799-5277 • www.lappcanada.com
TOP ENTRY SIDE ENTRY
Metric hoodsdo not comewith a neck.
All dimensionsare in mm.
All dimensions are in mm.
All dimensions are in mm.
Standard Grey Coating10.1320
2 Entries1 Entry
PG2929
NPT1”1”
Metric3232
PGPart #
10.138010.1370
MetricPart #
19.138019.1370
Standard Grey CoatingSize of Entry# ofEntries
Top Entry
Side Entry
PG21292129
NPT3/4”1”
3/4”1”
Metric-
322532
PGPart #
10.133010.134010.135010.1360
NPTPart #
10.1330 NP10.1340 NP10.1350 NP10.1360 NP
MetricPart #
-19.134019.135019.1360
Standard Grey CoatingSize of EntryPosition ofCable Entry
PG2129
NPT3/4”1”
Metric-
32
PGPart #
10.139010.1395
NPTPart #
10.1390 NP10.1395 NP
MetricPart #
-19.1395
Standard Grey CoatingSize of Entry
SURFACE MOUNT BASES
CABLE COUPLER HOODS
NPTPart #
10.1380 NP10.1370 NP
Dust cover with double lever bolts and attachment string: 10.1420
PANEL MOUNT BASES
Dust cover with double lever bolts and attachment string: 10.1420
Dust cover with double lever bolts and attachment string: 10.1420
EPIC® CONNECTORSHBE 32 Housings: Double Levers on Base
HOODS
Also AvailableTop Entry: Metric 40-19.1344
Side Entry:Metric 40-19.1362
313
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
314 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 32 Housings: Double Levers on Hood
TOP ENTRY SIDE ENTRY
Metric hoodsdo not comewith a neck.
All dimensionsare in mm.
All dimensions are in mm.
All dimensions are in mm.
Standard Grey Coating10.1323
Top EntrySide Entry
PG2929
NPT1”1”
Metric3232
PGPart #
70.205010.1366
NPTPart #
70.2050 NP10.1366 NP
MetricPart #
79.205019.1366
Standard Grey CoatingSize of EntryPositionof Cable
Entry
1 EntryPG29
NPT1”
Metric32
PGPart #
10.1373
MetricPart #
-
Standard Grey CoatingSize of Entry# ofEntries
SURFACE MOUNT BASES
PANEL MOUNT BASES
HOODS
NPTPart #
10.1373 NP
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
315877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 48 Plugs & Receptacles
View from Cable Side
Panel Cut-Out
Panel Cut-Out
Same View fromCable Side as
Screw & CrimpTermination
All dimensions are in mm.
All dimensions are in mm.
Contacts Sold Separately
These inserts fit inthe HBE 48 Series
Housings.
These inserts fit in the HBE
48 SeriesHousings.
CrimpContacts areon the next
page.
CRIMP TERMINATEDSCREW TERMINATED
SCREW & CRIMP TERMINATED INSERTS
SCREWLESS SPRING CAGE CLAMP INSERTS
Screw Terminated with wire protection (#1-24)Screw Terminated with wire protection (#25-48)Screw Terminated without wire protection (#1-24)Screw Terminated without wire protection (#25-48)Crimp Terminated: Machine (#1-24)Crimp Terminated: Machine (#25-48)
Plug Receptacle10.196010.204010.196110.204110.186010.1862
10.197010.205010.197110.205110.187010.1872
Screwless Cage Clamp (#1-24)Screwless Cage Clamp (#25-48)
Plug Receptacle10.400310.4005
10.401310.4015
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
316 877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSAccessories for Crimp Terminated Inserts
Wire Gauge: 0.5 - 4.0 mm2 for the HBE Crimp Inserts
Please note that the crimp range for this tool is 0.14 to 2.5 mm2 (AWG 26 - 14) with the appropriate crimp dies.
Locator11.1472
Crimp Dies11.1471
Crimp Tool11.1470
For removal of contacts use a slotted screwdriver. No special tool is necessary.
CRIMP TOOLS
HBE MACHINE CONTACTS: DIAMETER 2.5 MM
Marking Track
mm2
0.5.75 - 1.0
1.52.54.0
AWG2018161412
StrippingLength (mm)
Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3Pin=7.4, Socket =7.3
# of MarkingTracks
-123-
Pin11.190011.190111.190211.190311.1904
Socket11.195011.195111.195211.195311.1954
Pin11.192011.192111.1922
--
Socket11.197011.197111.1972
--
Silver GoldBags of 100
Part number= 1 contact
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
317877-799-5277 • www.lappcanada.com
EPIC® CONNECTORSHBE 48 Housings: Single Lever on Base
TOP ENTRY
Metric hoodsdo not comewith a neck.
All dimensionsare in mm.
All dimensions are in mm.
Without Dust Cover
10.1610
With Dust Coverwith hold down screw
and no dust cover bolts10.1520
With Dust Coverwith hold down screwand dust cover bolts
10.1525
Top Entry
Side Entry
PG293642293642
NPT1”
1 1/4”-1”
1 1/4”-
Metric324050324050
PGPart #
10.155010.156010.157010.158010.159010.1600
NPTPart #
10.1550 NP10.1560 NP
-10.1580 NP10.1590 NP
-
MetricPart #
19.155019.156019.157019.158019.159019.1600
Standard Grey CoatingSize of EntryPosition ofCable Entry
PANEL MOUNT BASES
HOODS
SIDE ENTRY
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
EPIC® CONNECTORSHBE 48 Housings: Single Lever on Base
All dimensions are in mm.
2 Entries
1 Entry
2 Entries withdust cover1 Entry withdust cover
PG2936293629362936
NPT1”
1 1/4”1”
1 1/4”1”
1 1/4”1”
1 1/4”
Metric3240324032403240
PGPart #
10.166010.166110.165010.165110.168010.168110.167010.1671
NPTPart #
10.1660 NP10.1661 NP10.1650 NP10.1651 NP10.1680 NP10.1681 NP10.1670 NP10.1671 NP
MetricPart #
19.166019.166119.165019.165119.168019.168119.167019.1671
Standard Grey CoatingSize of Entry# of Entries
SURFACE MOUNT BASES
877-799-5277 • www.lappcanada.com318
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com