Environmental & Energy Saving LED...
Transcript of Environmental & Energy Saving LED...
Contact us
TreeGreen Limited.www.egglighting.com
Sales:
Tel: +44 (0) 141 416 2624
Email: [email protected]
ce:
Suite 3/6 111 Union StreetGlasgow, G1 3TA
Technical Support:Tel: 0845 867 5838
Lines open Monday to Friday 8.30am to 5pm, with answer phone service outside these hours.
Website:For further information and other literature items please visit
www.egglighting.com
E-mail: [email protected]
Email: [email protected]
ContentsIndoor
LED PanelSquare panels
Circular panels
Drivers
Downlights Recessed
Surface mounted ceiling lights
Pendants
OutdoorAmenity lightingLED round bulkhead
Wall pack
Bulkhead luminaires
IndustrialSurface mounted
High bay
Emergency
Commercial oodlights
Guardian oodlights
Work lights
Glossary of Terms
08 - 1510 - 131415
16 - 2318 - 23
24 - 27
28 - 31
32 - 3734 - 3536 37
38 - 4340 - 4142 - 4344 - 49
50 - 53
54 - 57
58 - 63
64 - 69
Our Guarantees *
Should a product that has been correctly speci�ed, professionally installed by a registered trades person and operated in accordance with the speci�ed parameters, fail within 12 months of installation, TreeGreen will arrange for an experienced lighting professional to visit the site and take corrective action as required. This may involve either repair or replacement of the product. Contact TreeGreen for more information. This warranty applies to complete luminaires only and does not cover the following; accessories including drivers, lamps or modi�ed luminaires.
1 year on site
warranty
TreeGreen o�ers 5 & 7 year** extended guarantees against selected products where the installation is registered by e-mailing [email protected]. Installations must be carried out by a registered contractor and in accordance with the terms and conditions detailed on the registration page. By using components from industry leading suppliers with whom TreeGreen have strong relationships, we are able to o�er this quality guarantee.
Where an installation is not registered, TreeGreen o�ers a standard guarantee for a 3 year period. In the unlikely event of a validated product failure during this period, TreeGreen will arrange for the product to be repaired or replaced at our discretion. This service is o�ered in addition to any statutory rights.
*1 year on site warranty, 3 year guarantee and 5 & 7 year extended guarantee only available in the UK.
**For products with Emergency control gear, the extended guarantee is limited to 4 years for the emergency components due to the rated service life of the batteries.
3 year standard
guarantee
5& 7 year extended
guarantee
Enhanced Capital AllowanceThe Enhanced Capital Allowance (ECA) scheme is a key part of the Government’s programme to manage climate change. It provides businesses with enhanced tax relief for investments in equipment that meets published energy-saving criteria. TreeGreen can o�er a wide number of products that meet the eligibility criteria. Using ECA compliant luminaires can drastically improve ROI �gures. www.etl.decc.gov.uk
Incandescent lighting converts only 5% of energy into light, the remaining energy is converted into heat. LEDs convert up to 80% of energy into light, so they greatly reduce power consumption.
Lighting accounts for approximately 30% of the power used in o�ces. LED therefore provides huge potential to reduce electricity consumption and its associated costs.
Other �nancial bene�ts include less maintenance (lamp change); no expensive disposal (unlike �uorescent lamps, LEDs contain no mercury or other harmful materials); and improved sta� productivity (LED light provides a bright and pleasant working environment). Air conditioning costs are also reduced due to the lower amount of heat emitted from LED lighting, as well as life extension of the air conditioning unit because it is not worked so hard.
Cost savings andenergy reduction
Your energy saving potentialExample of a 4ft Tube
Old �tting: 4ft 36W T8 �uorescent tubeReplacement: 18W LED equivalent. Usage per year: 3,000 hours (approx 60 hours per week) UK electricity cost = £0.1/KWh
This is from electricity savings alone. Signi�cant reductions in Maintenance costs are an additional bene�t, LED tubes have a life of 30,000hours more than double most �uorescent lamps.
Why LED?Environmentally friendlyFluorescent lighting contains mercury. LEDs do not. This makes LEDs safer both to use and dispose of. The mercury contained in just one �uorescent lamp is enough to contaminate 30,000 litres of water beyond safe drinking level limits. Fluorescent lamps are therefore classi�ed as ‘hazardous waste’.
Reduced Carbon EmissionsLED converts up to 80% of energy into light. This both reduces electricity costs and dramatically reduces carbon emissions.
Cost E�ectiveThe true cost of �uorescent lighting is not only in its energy consumption. There is also maintenance over its lifetime, replacement labour and lamp outlay, and disposal costs. With LED, these costs don’t exist. LED is a Fit-&-Forget solution.
Calculating the electricity cost saving:
e.g. £0.10 x (((0.036kW + 0.006kW) - 0.018kW) x 3000hrs)
Electricity cost (£/kWh) x
((Conventional energy used (kW) - LED energy used (kW)) x Usage per year)
(36W T8 tube (+ 6W ballast) replaced by 18W LED tube)
= £7.20 saved in running cost per tube every year
= 57% reduction in CO 2 emissions
Long lifeThe life of LED is between 4 and 40 times greater than traditional products. What’s more, they produce consistent light output over their entire life.
Safe lightingLEDs emit minimal Ultra Violet light (UV). UV light attracts insects and can be harmful to skin, clothing and artwork. Heat emissions are greatly reduced with LED, which means they are cool to touch and perfect for heat sensitive applications.
DurabilityLEDs do not contain a �lament that can be damaged by shock and vibration – making LED one of the most stable light sources available.
Instant light and no �ickerLEDs produce 100% light instantly, with none of the warm up time required by �uorescents. Plus they are free of visible �icker - ideal to help prevent discomfort associated with traditional lighting.
Your energy saving potentialExample of a 600mm square recessed modular
Old �tting: 600 x 600mm 4 x18W T8 �uorescent lay in ModuleReplacement: 20W Backlit LED Panel equivalent. Usage per year: 3,000 hours (approx 60 hours per week) UK electricity cost = £0.1/KWh
This is from electricity savings alone. Signi�cant reductions in Maintenance costs are an additional bene�t, LED panels have a life of 50,000hours more than 3 times most �uorescent lamps.
Calculating the electricity cost saving:
e.g. £0.10 x (((0.072kW + 0.016kW) - (0.02kW)) x 3000hrs)
Electricity cost (£/kWh) x
((Conventional energy used (kW) - LED energy used (kW)) x Usage per year)
(4 x 18W T8 tubes (+ 16W ballast) replaced by 20W LED LuxPanel)
= £20.40 saved in running cost per luminaire every year
= 73% reduction in CO 2 emissions
LED�at panelsA range of recessed panels, making an ideal replacement for most �uorescent luminaires.
10
Square LED Panel
13
Accessories
14
Circular LED Panel
15
Drivers
9
LED Panel
10
LED Panel
LED square �at panels• Remote “plug and play” style driver, supplied in standard, dimmable,
or emergency options (see page 13)
• Maintenance free panel (50,000 hours lifetime)
• 4800K CCT ‘neutral white’ colour temperature as standard; 6000K CCT ‘cool’ special order, subject to minimum order requirement
• Samsung LED and Tridonic Driver
• Edgelit and backlit options
• Frameless versions feature no visible frame when installed in ceiling grid
Cat No. Description
Edgelit White FrameTGLP66W28S48 Standard driverTGLP66W28D48 Dimmable driver
TGLP66W35S48 Standard driverTGLP66W35D48 Dimmable driver
2800LUMINAIRELUMENS
93Llm/W
30WLED
3500LUMINAIRELUMENS
100Llm/W
35WLED
• 700mA constant current driver
• 700mA constant current driver
8mm
595m
m x
595
mm
585mm x
585mm
Edgelit White Frame
600mm x 600mm
Edgelit FramelessTGLPE6628S48 Standard driverTGLPE6628D48 Dimmable driver
TGLPE6635S48 Standard driverTGLPE6635D48 Dimmable driver
2800LUMINAIRELUMENS
30WLED• 700mA constant current driver
• 700mA constant current driver
Backlit FramelessTGLPB6628S48 Standard driverTGLPB6628D48 Dimmable driver
TGLPB6635S48 Standard driverTGLPB6635D48 Dimmable driver
2800LUMINAIRELUMENS
20WLED
3500LUMINAIRELUMENS
25WLED
• 700mA constant current driver
• 700mA constant current driver
93Llm/W
140Llm/W
1WARRANTY
year on site
50,000HOURS
5GUARANTEE
year extended
CRI 80>
4800KNEUTRALWHITE
13mm
595m
m x
595
mm
585mm x
585mm
Edgelit Frameless
56mm
595m
m x
595
mm
585mm x
585mm
Backlit Frameless
3500LUMINAIRELUMENS
100Llm/W
35WLED
140Llm/W
LED Panel
11
• Lower wattage
• Higher e�cacy
• Frameless appearance when installed
• Available in 2800lm and 3500lm
20 watt LED Panel
T8 �uorescent
Light source wattageLED
20 WattFluorescent
4 x 18W
Total luminaire wattage inc. control gear 20 88
Total installation wattage 1,000 4,400
Light source rated life (hours) 50,000 12,000
Expected product lifespan based on 12hrs / 252 days (years)
16.53 3.97
50 Luminaire Installation Energy Saving Comparison:
Backlit LED Panels2800
LUMINAIRELUMENS
20WLED
3500LUMINAIRELUMENS
25WLED
140Llm/W
140Llm/W
Backlit Frameless
Edgelit White Frame
13% extra visible light vs Edgelit
12
LED Panel
LED square �at panels
• Other sizes available: 200mm x 200mm, 300mm x 300mm, 500mm x 500mm
600mm x 600mmTGLP66IP35S48 Standard driverTGLP66IP35D48 Dimmable driver 3500
LUMINAIRELUMENS
• 900mA constant current driver
1200mm x 600mmTGLP612IP50S48 Standard driverTGLP612IP50D48 Dimmable driver 84
Llm/W60WLED• 1400mA constant current driver
IP65 Edgelit White Frame
1200mm x 600mm
5000LUMINAIRELUMENS
84Llm/W
60WLED• 1400mA constant current driver
Cat No. Description
Edgelit White FrameTGLP612W50S48 Standard driverTGLP612W50D48 Dimmable driver
5000LUMINAIRELUMENS
84Llm/W
60WLED• 1400mA constant current driver
Edgelit FramelessTGLPE61250S48 Standard driverTGLPE61250D48 Dimmable driver
5000LUMINAIRELUMENS
125Llm/W
40WLED• 1400mA constant current driver
Backlit FramelessTGLPB61250S48 Standard driverTGLPB61250D48 Dimmable driver
1200mm x 300mm
• 700mA constant current driver
Edgelit White FrameTGLP312W28S48 Standard driverTGLP312W28D48 Dimmable driver
• 700mA constant current driver
Edgelit FramelessTGLPE31228S48 Standard driverTGLPE31228D48 Dimmable driver
• 700mA constant current driver
Backlit FramelessTGLPB31228S48 Standard driverTGLPB31228D48 Dimmable driver
1WARRANTY
year on site
50,000HOURS
5GUARANTEE
year extended
LED Panel Depth
Edgelit White Frame 8mm
Edgelit Frameless 13mm
Backlit Frameless 56mm
Measurements:
CRI 80>
4800KNEUTRALWHITE
595mm
1200mm x 600mm
1185mmx
585mm1195
mm
295mm
1200mm x 300mm
1185mmx
285mm1195
mm
2800LUMINAIRELUMENS
30WLED
93Llm/W
2800LUMINAIRELUMENS
30WLED
93Llm/W
2800LUMINAIRELUMENS
20WLED
140Llm/W
5000LUMINAIRELUMENS
100Llm/W
35WLED
LED Panel
accessories
LED Panel
13TGLWSK - Wire suspension kit
3GUARANTEE
year standard
• Compatible with 600mm x 600mm, 600mm x 1200mm (non IP65) Edgelit White Frame LuxPanels, not Frameless or Backlit
• Can also be used with LP66SMF
LWSK
35mm
9mm
1500mm max
Cat No. Description Size
AccessoriesTGLP66SMF
Surface mounting frame for Edgelit/Edgelit Frameless 600mm 2 panel 610mm x 610mm x 57mm
TGLWSKWire suspension kit (4 part kit) (for Edgelit frame only)
Maximum suspension kit - 1500mm
TGLED3EP80 Emergency pack -
TGLP66SMF - Surface mounting frame
4 3
TGLED3EP80
5
1
2
6
The emergency pack is supplied pre-wired for easy connection to luminaires and drivers. 5 connections need to be made:
1. Live/Neutral to input of Driver
2. Output of driver to inverter
3. LED luminaire input
4. Indicator light
5. Connect Battery
6. Mains input
• 3 hour duration Emergency pack
• Compatible with all LuxPanels
• Can be retro-�tted to �xed output or dimmable drivers
• Battery pack can be replaced
• Supplied with all required connections and mini bezel for charge indicator
TGLED3EP80 - Emergency pack
57mm
610m
m x
610
mm
TGLP66SMF
540m
m x
540
mm
Also available - TGLP312SMF (300mm x 1200mm) TGLP612SMF (600mm x 1200mm)
SL N L
LED circular �at panels
14
LED Panel
1350LUMINAIRELUMENS
18WLED
Cat No. Description
Ø240mmTGLP240WS48 Standard driverTGLP240WD48 Dimmable driver
900LUMINAIRELUMENS
75Llm/W
12WLED
Ø180mmTGLP180WS48 Standard driverTGLP180WD48 Dimmable driver
700LUMINAIRELUMENS
78Llm/W
9WLED
Ø150mmTGLP150WS48 Standard driverTGLP150WD48 Dimmable driver
67Llm/W
6WLED
400LUMINAIRELUMENS
Ø120mmTGLP120WS48 Standard driverTGLP120WD48 Dimmable driver
1350LUMINAIRELUMENS
18WLED
75Llm/W
Ø240mmTGLPIP240WS48 Standard driverTGLPIP240WD48 Dimmable driver
• 350mA constant current driver
• 350mA constant current driver
• 350mA constant current driver
• 350mA constant current driver
• 350mA constant current driver
75Llm/W
IP65 circular �at panels
• Remote “plug and play” style driver, supplied in standard, dimmable, or emergency options (see page 13)
• Maintenance free panel (50,000 hours lifetime)
• 4800K CCT ‘neutral white’ colour temperature as standard; 6000K CCT ‘cool’ special order, subject to minimum order requirement
• Epistar LED and Tridonic Driver
• Edgelit White Frame
Suggested Equivalents
LED Circular Panel
Compact �uorescent
Ø240mm - 18W CFL - 26W or 2 x 18W
Ø180mm - 12W CFL - 26Wor 2 x 13W
Ø150mm - 9W CFL - 18W
Ø120mm - 6W CFL - 9W / 13W
1WARRANTY
year on site
50,000HOURS
5GUARANTEE
year extended
CRI 80>
WHITEFINISH
4800KNEUTRALWHITE
20mm
Ø23
6mm
Ø240mm
Ø225mm
Ø17
3mm
20mmØ180mm
Ø161mm
Ø120mm20mm
Ø12
0mm
Ø105mm
Ø14
6mm
20mmØ150mm
Ø131mm
LED Panel
15
www.egglighting.com
• LED Drivers are a key component as they supply the luminaire with power
• Wrongly speci�ed/matched drivers will inhibit performance and life of the LED
• Dimmable drivers can be used with digital dimming systems such as DSI, switch-dim or DALI
• Drivers are included with Luceco luminaires unless where clearly marked otherwise
Our range features LED Drivers from leading control gear manufacturer, Tridonic . The remote driver is an essential component, providing power to the LED chips and maximum rated life and performance of the LED’s can only be achieved with a high quality driver.
Drivers
Cat no. DescriptionConnected LED wattage range
(min-max)Current Tridonic code
TGLDR5350 5 watt 350mA Fixed Output Driver 2.5W - 5W 350mA 24166311
TGLDR10350 10watt 350mA Fixed Output Driver 4.5W - 10W 350mA 87500240
TGLDR20350 20 watt 350mA Fixed Output Driver 9.0W - 20W 350mA 87500187
TGLDR35350 35 watt 350mA Fixed Output Driver 17.5W - 35W 350mA 87500193
TGLDR10500 10 watt 500mA Fixed Output Driver 4.5W - 10W 500mA 87500242
TGLDR20500 20 watt 500mA Fixed Output Driver 9.0W - 20W 500mA 87500189
TGLDR20700 20 watt 700mA Fixed Output Driver 9.0W - 20W 700mA 87500191
TGLDR35700 35 watt 700mA Fixed Output Driver 17.5W - 35W 700mA 87500197
TGLDR60700 60 watt 700mA Fixed Output Driver 30W - 60W 700mA 87500201
TGLDR42900 42 watt 900mA Fixed Output Driver 21W - 42W 900mA 87500246
TGLDR651400 65 watt 1400mA Fixed Output Driver 32.5W - 65W 1400mA 87500205
TGLDRDIM15350 15 watt 350mA Dimmable Driver 5.0W - 15W 350mA 86458899
TGLDRDIM20900 20 watt 350-900mA Dimmable Driver 9W - 20W 350-900mA 28000123
TLDRDIM20500 20 watt 500mA Dimmable Driver 5.0W - 20W 500mA 86459107
TGLDRDIM30700 30 watt 700mA Dimmable Driver 5.0W - 30W 700mA 86458900
TGLDRDIM35900 35 watt 900mA Dimmable Driver 17.5W - 35W 900mA 28000125
TGLDRDIM551400 55 watt 1400mA Dimmable Driver 25W - 55W 1400mA 28000129
TGLDRDIM551750 55 watt 900-1750mA Dimmable Driver 25W - 55W 900-1750mA 28000129
Recessed & Surface MountedLED downlightsAlternatives and retro�t replacements to Tungsten, HID and CFL luminaires. O�ering savings of up to 80%.
20
Recessedmodular
28
Surface mounted
17
18
Recesseddual switched
22
RecessedCarbon
LED D
ownlights
Recessed downlights
dual switched
18
Dow
nlights
22˚
BEAM ANGLE
37˚
BEAM ANGLE
111˚
13.8W
LED17.3W
LED
Panel Spotlight
21mm
Ø285mm
Ø300mm
44mm
TGLKT7126
2500LUMINAIRELUMENS
31.1W
LED
TGLKT7126
4000KNEUTRALWHITE
80Llm/W
• Drivers required
• Fixed output drivers = LDR20350 (panel) & LDR20350 (spotlight) Dimmable drivers = LDRDIM35350 (panel) & LDRDIM15350 (spotlight)
Recessed downlights
dual switched
Dow
nlights
19
300mm
285mm x 285mm
300
21mm 73mm
TGLKT7128
2100LUMINAIRELUMENS
23.5W
LED
TGLKT7128
4000KNEUTRALWHITE
79Llm/W
IP20RATED
3GUARANTEE
year standard 1
WARRANTY
year on site
CRI 80> WHITE
FINISH
• Fixed position
• Double insulated
• Manufactured in aluminium
• Optical di�user panel
• Panel and spotlight can be used together or independently
• Separate driver required for each element
BEAM ANGLE
111˚
17.3W
LED
Panel
22˚
BEAM ANGLE
37˚
6.2WLED
Spotlight
• Fixed output drivers = TGLDR20350 (panel) & TGLDR5350 (spotlight) Dimmable drivers = TGLDRDIM35350 (panel) & TGLDRDIM15350 (spotlight)
Recessed downlights
Carbon
20
Dow
nlights
2160LUMINAIRELUMENS
18WLED
1440LUMINAIRELUMENS
12WLED
• Ideal replacement for compact �uorescent downlights
• Running cost savings of up to 60% against �uorescent installations
• Supplied with interchangeable white and silver �nish inner bezel options
• Designed to retro�t/match ceiling cut outs of common compact �uorescent downlights
• Maintained emergency versions available for TGLBDL4/6/8IN as a remote “plug and play” style driver - TGLED3EP80, (see page 13)
Ø230mm
Ø200mm
720LUMINAIRELUMENS
6WLED
480LUMINAIRELUMENS
4WLED
120Llm/W
300LUMINAIRELUMENS
2.5WLED
120Llm/W
Ø150mm
White inner bezel
Ø200mmTGLBDL6IN Standard driver
Ø150mmTGLBDL4IN Standard driver
Ø110mmTGLBDL3IN Standard driver
Ø90mmTGLBDL2IN Standard driver
Cat No. Description
Ø230mmTGLBDL8IN Standard driver
Ø193mm
Ø232mm
105m
m
12mmØ210mm
105m
m
Ø197mm
12mm
Ø159mm
Ø175mm
Ø148mm
12mm
Ø109mm
Ø130mm
105m
m
Silver inner bezel
120Llm/W
120Llm/W
120Llm/W
35,000HOURS
3GUARANTEE
year standard 1
WARRANTY
year on site
36˚
BEAM ANGLE
90˚
WHITEFINISH
IP20RATED
Ø79mm
79.5
mm
Ø110mm
19mm
Ø95mm
Ø89mm
19mm Ø59mm
Ø89mm
Ø75mm
4200KNEUTRALWHITE
Ø110mm
Ø90mm
Dow
nlights
21
CRI 80>
LED Commercial Downlights
Compact �uorescent
TGLBDL4IN - 6W CFL - 18W
TGLBDL6IN - 12WCFL - 26W/32W
or 2 x 18W
TGLBDL8IN - 18WCFL - 42Wor 2 x 26W
Suggested Equivalents
• Double insulated
79.5
mm
Downlights
recessed & semi recessed
22
Dow
nlights
910LUMINAIRELUMENS
9.5WLED
TGLKT6563
4000KNEUTRALWHITE
96Llm/W
111˚
BEAM ANGLE
14˚
TGLKT6563
Ø125mm
75mm
Ø135mm
• Fixed position
• Gimbal - adjustable positioning
90°
80m
m
275mm x 150mm
Ø125mm
350°
126mm
TGLKT6566
1280LUMINAIRELUMENS
14.3W
LED
TGLKT6566
4000KNEUTRALWHITE
90Llm/W
200˚
BEAM ANGLE
15˚
3GUARANTEE
year standard 1
WARRANTY
year on site
IP20RATED
CRI 80>
350° swivel & 90 ° tilt
WHITEFINISH
• Manufactured in aluminium
• Leaf clip installation
• Double insulated
• Fixed output driver = LDR20500 Dimmable driver = LDRDIM15500
• Driver required
Recessed downlights
IP rated
Dow
nlights
23
BEAM ANGLE
29˚
720LUMINAIRELUMENS
6.2WLED
TGLKT6595
4000KNEUTRALWHITE
116Llm/W
• An ideal alternative to low voltage halogen 35W lamp or mains voltage halogen 50W lamp
• Driver required
720LUMINAIRELUMENS
6.2WLED
TGLKT6594A
4000KNEUTRALWHITE
116Llm/W
35˚
BEAM ANGLE
30˚
Adjustable positioning
IP65RATED
• Fixed position
Ø75mm
Ø90mm
52mm
TGLKT6594A
TGLKT6595
• Gimbal - adjustable positioning
Ø75mm
Ø90mm
44mm
3GUARANTEE
year standard 1
WARRANTY
year on site
CRI 80>
IP44RATED
WHITEFINISH
KT6594A KT6595
Cut o� angle
• low glare due to optimised design
• Manufactured in aluminium
• Double insulated
• Fixed output driver = LDR10350 Dimmable = LDRDIM15350
44˚
Surface Mounted Ceiling LightsLED alternatives to the tr rescent utilised in educational applications.
26
25
Surface mouted
Surface linear
Plus
26
urface mounted
• Ideal replacement f rescent
• Designed for surfac ce and educational environments
• Steel backplate with Polycarbonat r, secured by screwed endcaps
• Uses High Quality Micr strips
• Supplied in 4000K ‘neutral’ white colour temperature
185mm
92mm
92mm
800mm
Single LED array with DALI dimmable driverTGLAC12W22D40 DALI driver 1320mm 2200 24W 92TGLAC12W22ED40 Emergency version 1320mm 2200 24W 92TGLAC15W34D40 DALI driver 1620mm 3400 34W 100TGLAC15W34ED40 Emergency version 1620mm 3400 34W 100TGLAC18W44D40 DALI driver 1920mm 4400 46W 96TGLAC18W44ED40 Emergency version 1920mm 4400 46W 96
Single LED array with microwave sensorTGLAC12W22S40MW Standard driver 1320mm 2200 24W 92TGLAC12W22E40MW Emergency version 1320mm 2200 24W 92TGLAC15W34S40MW Standard driver 1620mm 3400 34W 100TGLAC15W34E40MW Emergency version 1620mm 3400 34W 100TGLAC18W44S40MW Standard driver 1920mm 4400 46W 96TGLAC18W44E40MW Emergency version 1920mm 4400 46W 96
Cat No. Description Length Luminaire Lumens Wattage cacy
Llm/W
Single LED arrayTGLAC12W22S40 Standard driver 1320mm 2200 24W 92TGLAC12W22E40 Emergency version 1320mm 2200 24W 92TGLAC15W34S40 Standard driver 1620mm 3400 34W 100TGLAC15W34E40 Emergency version 1620mm 3400 34W 100TGLAC18W44S40 Standard driver 1920mm 4400 46W 96TGLAC18W44E40 Emergency version 1920mm 4400 46W 96
1320 /1620 /
1920mm
LED array with int
Single
Surface linear
Plus
Surface mounted
27
30,000HOURS
Twin LED array with DALI dimmable driverTGLAC12W44D40 DALI driver 1320mm 4400 45W 98TGLAC12W44ED40 Emergency version 1320mm 4400 45W 98TGLAC15W66D40 DALI driver 1620mm 6600 67W 99TGLAC15W66ED40 Emergency version 1620mm 6600 67W 99TGLAC18W87D40 DALI driver 1920mm 8700 92W 95TGLAC18W87ED40 Emergency version 1920mm 8700 92W 95
Twin LED array with microwave sensorTGLAC12W44S40MW Standard driver 1320mm 4400 45W 98TGLAC12W44E40MW Emergency version 1320mm 4400 45W 98TGLAC15W66S40MW Standard driver 1620mm 6600 67W 99TGLAC15W66E40MW Emergency version 1620mm 6600 67W 99TGLAC18W87S40MW Standard driver 1920mm 8700 92W 95TGLAC18W87E40MW Emergency version 1920mm 8700 92W 95
All surface mounted lights have 4000K LEDs as standard, other colour temperatures are available to order, subject to minimum order requirement
Surface linear
50,000HOURS
3GUARANTEE
year standard 1
WARRANTY
year on site
IP20RATED
CRI 80>
WHITEFINISH
4000KNEUTRALWHITE
Cat No. Description Length Luminaire Lumens Wattage cacy
Llm/W
Twin LED arrayTGLAC12W44S40 Standard driver 1320mm 4400 45W 98TGLAC12W44E40 Emergency version 1320mm 4400 45W 98TGLAC15W66S40 Standard driver 1620mm 6600 67W 99TGLAC15W66E40 Emergency version 1620mm 6600 67W 99TGLAC18W87S40 Standard driver 1920mm 8700 92W 95TGLAC18W87E40 Emergency version 1920mm 8700 92W 95
185mm
92mm
92mm
800mm1320 /1620 /
1920mm
Cat No. Description Length Luminaire Lumens Wattage cacy
Llm/W
Twin LED tubesTGLACT12W43S40 Standard driver 1320mm 4320 48W 90TGLACT12W43E40 Emergency version 1320mm 4320 48W 90TGLACT15W57S40 Standard driver 1620mm 5760 64W 90TGLACT15W57E40 Emergency version 1620mm 5760 64W 90TGLACT18W71S40 Standard driver 1920mm 7160 80W 90TGLACT18W71E40 Emergency version 1920mm 7160 80W 90
Academy Plus Academy
Twin
Suspended pendantsPendants produce a gentle light creating a bright atmosphere for any space.
30
Pendants
29
Pendants
Suspended
pendants
30
Pendants
• Anodised aluminium �nish
• Suspension cables and transparent feed cable
• Suspension height can be adjusted without tools
• Fixed output constant current driver
• Anti-glare microprismatic surface
• 1mm di�user optics
52mm
1190mm
56mm
52mm
1750mm
56mm
BEAM ANGLE
103 ˚
4000KNEUTRALWHITE
30WLED
2000LUMINAIRELUMENS
TGLKT1012BCW
67Llm/W
TGLKT1012ACW
TGLKT1012BCW
4000KNEUTRALWHITE
1400LUMINAIRELUMENS
18.5W
LED
TGLKT1012ACW
76Llm/W
BEAM ANGLE
103 ˚
Suspended
pendants
Pendants
31
103mm
1190mm
67.5mm
TGLKT1013CW
3GUARANTEE
year standard 1
WARRANTY
year on site
IP20RATED
CRI 80>
4000KNEUTRALWHITE
3100LUMINAIRELUMENS
42WLED
TGLKT1013CW
74Llm/W
BEAM ANGLE
108 ˚
Amenity LED lightingMultiple mounting options and models - including microwave presence detecting and emergency lighting.
34
LEDround bulkheads
33
35
Atlasaccessories
36
Wall pack
37
Bulkheadluminaires
Am
enity
Amenity LED
Round bulkheads
34
Am
enity
TGLBH154K - Wall mounted
3GUARANTEE
year standard 1
WARRANTY
year on siteIP65
RATED
50,000HOURS
4000KNEUTRALWHITE
TGLBH154APEPlastic eyelid cover
Ceiling semi-recessed
TGLBH154K
Ø317mm 60mm
Ø317mm
Ø290mm
Ø317mm
105m
m
TGLBH154APE
Suitable for use with TGLBH154K, TGLBH154K3M,
TGLBH154KMW, TGLBH154KMW3M
Replaces standard cover.
• Order the accessories separately or in addition to the bulkhead
CRI 80>
• Alternative to 28watt TC-DD (2D) compact �uorescent
• Multiple mounting options include, ceiling surface, ceiling semi-recessed, wall mounted and provision for BESA and four side conduit entries
• Microwave presence detector switches the output to 10% in “corridor function” standby mode or 0%, selectable during installation
• Microwave version includes photocell for dusk-till-dawn switching option
• Double insulated
• Integral driver
Cat No. Description LuminaireLumens Wattage E�cacy
Llm/W
Round BulkheadTGLBH154K Standard 1250 15W 83TGLBH154K3M w/ 3hr Emergency 1250 16W 78TGLBH154KMW w/ Microwave sensor 1250 17W 73TGLBH154KMW3M w/ Microwave sensor & 3hr Emergency 1250 18W 69
Exploded view
Amenity LED
Round Bulkhead accessories
Am
enity
35
Ø341mm 110mmTGLBH154AME
Ø294m
m
Ø341mm 110mm
Ø294m
m
TGLBH154AMG
Ø341mm 110mm
Ø294m
m
TGLBH154AMS
Ø341mm 110mm
Ø294m
m
TGLBH154AMP
Exploded view
TGLBH154AMG - Metal grilleTGLBH154AME - Metal eyelid
TGLBH154AMS - Metal split eyelid
• For use with round bulkhead (order bulkhead separately)
• Comes with front and back covers and tamper proof screws, a high security screw kit is also available including special tool - TGLBHATK
• All die-cast aluminium accessories are �nished in RAL7026 ‘Graphite Grey’
• Front covers can be rotated every 90˚
• Access to rear BESA and four side entry points
TGLBH154AMP - Metal standard
Comes with Front and Back covers and corrosion resistant screws. An Anti-Tamper Screw Kit is also available including special tool - LBHATK
Amenity LED
wall pack
36
Am
enity
3GUARANTEE
year standard 1
WARRANTY
year on site
IP65RATED
• Integral LED array and driver
Wall pack
308m
m
264mm
182mm
25,000HOURS
32.5W
LED1240
LUMINAIRELUMENS
4200KNEUTRALWHITE
TGLWP21L42
38Llm/W
• LED alternative to HID, ideal for security lighting
• RAL7026 �nish
• Supplied pre-wired with H05RN-F rubber insulated cable
Photocell version also available•
Amenity LED
bulkhead luminaires
Am
enity
37
3GUARANTEE
year standard
• Emergency version also available
• 10m detection range with a 90˚ angle of detection fully adjustable horizontally
• Capable of switching a further 1000 Watts of lighting (500watt �uorescent)
• Adjustable sensitivity, timer and ambient light switching level
• Manufactured to BS EN 60598-1
• 20mm guide entries for cable or conduit access
• 20mm guide and �xing centres for BESA box �xing
TGLBHD1/R
TGLBHD1PIR
TGLBHD1 TGLBHD1R
240mm
125mm120mm
125mm240mm
120mm
4000KCOOLWHITE
IP65RATED
TGLBHD1PIRwith microwave presence detector
8WLED
920LUMENS
115Lm/ W
IP65RATED
8WLED
920LUMENS
115Lm/ W
Bulkhead with black or white base and polycarbonate lens
4000KCOOLWHITE
Industrial LED lightingLED alternatives to the traditional HID high ba rescent utilised in industrial and construction applications.
40
Surface mounted
39
42
IP65High bay
Industrial
Industrial
Surface mounted
40
Industrial
• Complete with LED array, ideal replacement f rescent
• Designed for surface mount application in industrial and commercial environments
• Polycarbonat stainless steel anti-tamper clips
Single LED array with DALI driverTGLCL12W24D40 DALI driver 1240mm 2400 23W 105TGLCL12W24ED40 Emergency driver 1240mm 2400 23W 105TGLCL15W37D40 DALI driver 1540mm 3770 34W 110TGLCL15W37ED40 Emergency driver 1540mm 3770 34W 110TGLCL18W47D40 DALI driver 1840mm 4760 45W 105TGLCL18W47ED40 Emergency driver 1840mm 4760 45W 105
Twin LED array with DALI driverTGLCL12W46D40 DALI driver 1240mm 4550 46W 100TGLCL12W46ED40 Emergency driver 1240mm 4550 46W 100TGLCL15W74D40 DALI driver 1540mm 7400 67W 110TGLCL15W74ED40 Emergency driver 1540mm 7400 67W 110TGLCL18W91D40 DALI driver 1840mm 9200 91W 100TGLCL18W91ED40 Emergency driver 1840mm 9200 91W 100
Cat No. Description Length Luminaire Lumens Wattage cacy
Llm/W
Single LED arrayTGLCL12W24S40 Standard driver 1240mm 2400 23W 105TGLCL12W24E40 Emergency driver 1240mm 2400 23W 105TGLCL15W37S40 Standard driver 1540mm 3770 34W 110TGLCL15W37E40 Emergency driver 1540mm 3770 34W 110TGLCL18W47S40 Standard driver 1840mm 4760 45W 105TGLCL18W47E40 Emergency driver 1840mm 4760 45W 105
Twin LED arrayTGLCL12W46S40 Standard driver 1240mm 4550 46W 100TGLCL12W46E40 Emergency driver 1240mm 4550 46W 100TGLCL15W74S40 Standard driver 1540mm 7400 67W 110TGLCL15W74E40 Emergency driver 1540mm 7400 67W 110TGLCL18W91S40 Standard driver 1840mm 9200 91W 100TGLCL18W91E40 Emergency driver 1840mm 9200 91W 100
Single
Single
840mm
100mm 90mm
1240mm
1540mm
1840mm
900mm
1020mm
LEDs (Twin)
TGLPC3BSP65 - Batten mount PIR presence detector with lux level sensing, time delay function and infrared override
TGLPC3BDP65 - Batten mount PIR presence detector with Direct Dim and time delay function (up to 10 ballasts). DALI/DSI
(Purchase separately)
100mm
Industrial
Surface mounted
Industrial
41
• Fitted with LED tubes, ideal replacement f rescent
• Designed for surface mount applications in industrial environments
• Polycarbonat
Cat No. Description Length Luminaire Lumens Wattage cacy
Llm/W
Single LED tubesTGLCLT12W21S40 Standard driver 1240mm 2160 24W 90TGLCLT12W21E40 Emergency driver 1240mm 2160 24W 90TGLCLT15W28S40 Standard driver 1540mm 2880 32W 90TGLCLT15W28E40 Emergency driver 1540mm 2880 32W 90TGLCLT18W35S40 Standard driver 1840mm 3580 40W 90TGLCLT18W35E40 Emergency driver 1840mm 3580 40W 90
Twin LED tubesTGLCLT12W43S40 Standard driver 1240mm 4320 48W 90TGLCLT12W43E40 Emergency driver 1240mm 4320 48W 90TGLCLT15W57S40 Standard driver 1540mm 5760 64W 90TGLCLT15W57E40 Emergency driver 1540mm 5760 64W 90TGLCLT18W71S40 Standard driver 1840mm 7160 80W 90TGLCLT18W71E40 Emergency driver 1840mm 7160 80W 90
3GUARANTEE
year standard 1
WARRANTY
year on site
IP65RATED
CRI 80>
GREY FINISH
50,000HOURS
All climate products are supplied with 4000K LED’s as standard, other colour temperatures are available to order.
Mounting bracket, gland kit and screws include for installation.
Twin
1240mm
1540mm
1840mm
100mm 140mm
1020mm
840mm
900mm
Twin
4000KNEUTRALWHITE
100mm
Industrial
IP65 high bay lighting
42
Industrial
3GUARANTEE
year standard
1WARRANTY
year on site
ALUMINIUM
FINISH
CRI 80>
IP65RATED
BLACKFINISH
Body Re�ectorCat No. Description Luminaire
Lumens Wattage Colour Temp
E�cacy Llm/W Lifetime
High bayTGLHB120W 120W high bay body 11,190 120W 4000K 93 50,000TGLHB200W 200W high bay body 19,350 214W 4000K 90 50,000TGLHBRFL60 60˚ beam angle aluminium re�ector - - - - -TGLHBRFL120 120˚ beam angle aluminium re�ector - - - - -TGLHBRFT 60˚ beam angle polycarbonate refractor - - - - -
• 120W and 200W LED o�ering >90lm/W
• 60˚ or 120˚ beam angle re�ector/refractor to be ordered separately
• Alternative to HID High bay luminaires of 250W-400W
• Recommended for mounting heights of 6m to 12m
• Instant light output and re-strike unlike most HID
• No exposed glass so ideal for food storage areas
• Pre-wired with 300mm of H05RN-F rubber cable
TGLHB120W
359mm
TGLHBRFL60 / LHBRFT
255mm
Ø420mm
TGLHB200W
TGLHBRFL120
397mm
140mm
Ø510mm
5GUARANTEE
year extended 3
GUARANTEE
year standard
POLYCARB- ONATE
FINISH
Refractor
TGLHB200W TGLHB120W
TGLHBRFL120
TGLHBRFL60 TGLHBRFT
Emergency LED lightingRange of LED Emergency lighting includes exit signs, bulkheads, downlights and twin spots.
46
Emergency lighting
45
Emergency
LED
emergency lighting
46
Emergency
195mm
394mm
TGLEMEXM3
IP20RATED
Exploded view1. Cover2. Legend3. Light guide plate4. Holder 1 of power line5. Holder 2 of power line6. Rubber ring7. Battery8. Main PCB9. LED PCB10. Translucent panel11. Bottom case
1
2
3
45
6
711
109
8
• Materials: Polycarbonate body and opal panel with legend
• 3.6V 2Ah Ni-MH batteries
• Complete with white LED
• High brightness
• Emergency operation time 3hrs
• DC or AC/DC operated
• Can be also used as Non-Maintained
• Easy installation with replaceable exit panel
• Latest ISO 7010 format legend
• Viewing distance = 32m
1WARRANTY
year on site 3
GUARANTEE
year standard
Assemble the green exit sign panel
1 2 3 4Press the corner on the left of the panel into the slot.
Press the exit sign to the end of left.
Press the up and down sides into the slot.
Right move the panel to be in the middle.
26mm
Cat No. Description
3HR Maintained Exit BoxTGLEMEXM3 Standard with Arrow Down LegendTGLEMEXUA Arrow UP Legend Panel
(order with TGLEMEXM3)TGLEMEXLA Arrow LEFT Legend Panel
(order with TGLEMEXM3)TGLEMEXRA Arrow RIGHT Legend Panel
(order with TGLEMEXM3)
1.3WLED
45LUMINAIRELUMENS
LED
emergency lighting
Emergency
47
TGLEMDEM3
TGLEMBHM3
• Materials: Aluminium alloy body, double sided edge lit acrylic blade with legends
• 3.6V 600mh Ni-Cd batteries
• Complete with white LED
• Emergency operation time 3hrs
• AC/DC operated
• Silver �nish
• Latest ISO 7010 format legend
• Viewing distance = 32m
• Materials: Polycarbonate body and di�user
• 2.4V 4.5Ah Ni-Cd batteries
• Complete with white LED
• Emergency operation time 3hrs
• DC or AC/DC operated
• Latest ISO 7010 format legend
• Viewing distance = 24m
• Can also be used as Non-Maintaned
1WARRANTY
year on site 3
GUARANTEE
year standard
IP20RATED
TGLEMDEM33Hr maintained decorative exit
with arrow down legend
3WLED
50LUMINAIRELUMENS
IP65RATED
TGLEMBHM3IP65 3Hr maintained emergency
bulkhead with self adhesive legend
3.8WLED
102LUMINAIRELUMENS
352mm
117mm
76mm
400mm 30mm
250mm
190mm
LED
emergency lighting
48
Emergency
230mm
155mm
Ø41mm
PCB Housing
188mm
Ø41mm
Battery Housing
Ø78mm
55mm
Lamp Head
TGLEM5DLNM3294m
m
300mm 70mm
TGLEMIPTWNM3
• Materials: polycarbonate adjustable heads
• 6V 7Ah Lead acid battery
• Complete with white LED
• Emergency operation time 3hrs
• DC operated
• All plastic construction, ideal for food areas
TGLEM5DLNM3 3HR Non-Maintained
Emergency Downlight
5WLED
IP20RATED
1WARRANTY
year on site 3
GUARANTEE
year standard
180LUMINAIRELUMENS
IP65RATED
TGLEMIPTWNM3IP65 3HR Non-Maintained
Emergency Twin-spot
5WLED
220LUMINAIRELUMENS
WHITEFINISH
• AC/DC, AC or DC
• Built-in battery: 3.6V 4.5Ah Ni-Cd
• Emergency operation time 3hrs
• Downlight is illuminated Green in normal use, White in Emergency mode
Commercial �oodlightsMaintenance free, supplied with rubber insulated cable to maintain integrity of the aluminium housing.
52
Commercial �oodlights
51
Comm
ercial �oodlights
Commercial
�oodlights
52
Comm
ercial �oodlights
180mm
250mm
263mm 90
372mm
345mm 109
465mm
65
TGLCFL25W
25WLED
1780LUMINAIRELUMENS
4200KNEUTRALWHITE
72Llm/W
TGLCFL60W
60WLED
3600LUMINAIRELUMENS
4200KNEUTRALWHITE
60Llm/W
• Maintenance free
• Durable powder coated aluminium coating (RAL7026)
TGLCFL120W
120WLED
8100LUMINAIRELUMENS
4200KNEUTRALWHITE
68Llm/W
TGLCFL200W
200WLED
14400LUMINAIRELUMENS
4200KNEUTRALWHITE
72Llm/W
TGLCFL25W
TGLCFL60W
TGLCFL120W
BEAM ANGLE
120 ˚
90˚
IP65RATED
• Alternative to HID �oodlights up to 400W
• Supplied with pre-wired rubber insulated cable (2m)
440mm
555mm
143
3GUARANTEE
year standard 1
WARRANTY
year on site
50,000HOURS
TGLCFL200W
Comm
ercial �oodlights
53
CRI 80>
Guardian �oodlightsMaintenance free & pre-wired �oodlights o�ering 90% savings over halogen.
56
Guardian �oodlights
57
Guardian �oodlights + PIR
55
Guardian �oodlights
Guardian
�oodlights
56
Guardian �oodlights
102mm
85m
m
64m
m
142mm
184m
m
162m
m
160mm
238m
m
210m
m
TGLDFL10W
TGLDFL20W
TGLDFL30W
TGLDFL50W
TGLDFL10W
125mm
140m
m
115m
m
TGLDFL20W
TGLDFL30W
TGLDFL50W
The chips have multiple diodes below the yellow coloured phosphor coating. The phosphor coating converts the most e�cient light emitted by the diodes-blue-into the white light. The phosphors have been speci�cally mixed to produce a colour temperature of 2800 degrees Kelvin, to match the colour temp of traditional Halogen lamps.
113mm
178mm
222mm
284mm
• 90% energy saving over halogen
• Maintenance free
• Pre-wired 1m of H05RN-F rubber cable
• Instant 100% light output
Guardian �oodlights Halogen
10W 100W
20W 200W
30W 300W
50W 500W
Suggested alternativesHalogen Equivalents:
Note – this product range is designed for outdoor use. Interior use, especially as an uplight is not recommended.
600LUMINAIRELUMENS
1200LUMINAIRELUMENS
1800LUMINAIRELUMENS
3000LUMINAIRELUMENS
10WLED
20WLED
30WLED
50WLED
60Llm/W
60Llm/W
60Llm/W
60Llm/W
2800KWARMWHITE
2800KWARMWHITE
2800KWARMWHITE
2800KWARMWHITE
Guardian
�oodlights + PIR
Guardian �oodlights
57
Floodlight PIR
IP65RATED
3GUARANTEE
year standard
IP44RATED
BEAM ANGLE
95˚30,000HOURS
64m
m
85m
m
130mm
TGLDFLP10W
115m
m
140m
m
160mm
TGLDFLP20W16
2mm
184m
m
185mm
90mm
TGLDFLP30W
210m
m
238m
m
185mm
110m
m
TGLDFLP50W
• PIR range = 180˚
• PIR coverage = 2-12m
• Override facility allowing �oodlight to be kept ON during darkness
• Adjustable timer, sensitivity & lux level
113mm
178mm
222mm
284mm
CRI 80>
TGLDFLP10W
TGLDFLP20W
TGLDFLP30W
TGLDFLP50W
2800KWARMWHITE
2800KWARMWHITE
2800KWARMWHITE
2800KWARMWHITE
156m
m
195mm
245mm
300mm
600LUMINAIRELUMENS
1200LUMINAIRELUMENS
1800LUMINAIRELUMENS
3000LUMINAIRELUMENS
10WLED
20WLED
30WLED
50WLED
60Llm/W
60Llm/W
60Llm/W
60Llm/W
Portable Work lightsA range of portable task lights in mains voltage and rechargeable versions. Ideal for DIY tasks and hobbies.
59
60
Worklighting
Work lights
Portable
work lights
60
Work lights
TGLW10BY1
TGLW20BY1
TGLW30BY1
TGLW50BY1
600LUMINAIRELUMENS
1200LUMINAIRELUMENS
1800LUMINAIRELUMENS
3000LUMINAIRELUMENS
10WLED
20WLED
30WLED
50WLED
60Llm/W
5000KNEUTRALWHITE
5000KNEUTRALWHITE
5000KNEUTRALWHITE
5000KNEUTRALWHITE
60Llm/W
60Llm/W
60Llm/W
IP65RATED
3GUARANTEE
year standard
BEAM ANGLE
95˚30,000HOURS
CRI 80>
• H frame with soft grip handle
• Aluminium stand, die cast housing with tempered glass
• 1m of H05RN-F rubber cable
• Weatherproof power switch
234m
m
164mm145mm
10W
20W
210mm 190mm
264m
m
30W
255mm 190mm
295m
m
50W
310mm 248mm
334m
m
• 90% energy saving over halogen
• Maintenance free
Portable
rechargeable work lights
Work lights
61
• Weatherproof power saving mode switch
• Operating duration at: Full output >3hrs Power saving >6hrs
• H frame with soft grip handle
• Aluminium stand, die cast housing with tempered glass
• Epistar chip (non integrated driver)
• Recharge through mains or car charger
IP65RATED
3GUARANTEE
year standard
CRI 80>30,000
HOURS
TGLWR10BY
TGLWR20BY
TGLWR5BY
375LUMINAIRELUMENS
5WLED
5000KNEUTRALWHITE
75Llm/W
Mains chargerCar charger
5W
BEAM ANGLE
95˚
750LUMINAIRELUMENS
1500LUMINAIRELUMENS
10WLED
20WLED
75Llm/W
5000KNEUTRALWHITE
5000KNEUTRALWHITE
75Llm/W
234m
m
164mm145mm
234m
m
164mm145mm
10W
20W
210mm 190mm
264m
m
3 Stage Power Saving Switch
Power saving switch, allows 50% light output mode, with 100% increase in duration
OFF
50%
100%
Portable
work lights
62
Work lights
TGLWT210BY4
TGLWT220BY4
TGLWT230BY4
IP65RATED
3GUARANTEE
year standard
BEAM ANGLE
95˚30,000HOURS
CRI 80>
Twin head tripod
2x
2x
2x
• Aluminium stand, die cast housing with tempered glass
• 4m of H05RN-F rubber cable
• Weatherproof power switch on each �oodlight
850mm - 1700mm
Ø770mm
600LUMINAIRELUMENS
1200LUMINAIRELUMENS
1800LUMINAIRELUMENS
10WLED
20WLED
30WLED
60Llm/W
5000KNEUTRALWHITE
5000KNEUTRALWHITE
5000KNEUTRALWHITE
60Llm/W
60Llm/W
1500mm max
• 90% energy saving over halogen
• Maintenance free
• Weatherproof switch on each �oodlight for independent switching
Weatherproof switch
AC (~) Alternating Current, as found in the mains power supply.
Accent Lighting Also commonly called display or highlighting. Accent lighting is typically at a higher intensity to emphasise an object or area. A Ratio of 3:1 versus ambient lighting is recommended for accent lighting to be noticeable.
Ambient Lighting The general background illuminance is usually at a low level and with task and/or accent lighting used for the task or display.
Ambient Temperature (Ta) The air temperature surrounding the luminaire or component. LED luminaires are particularly temperature sensitive with excess temperature a�ecting performance and rated life. See also Junction Temperature.
Ampere (Amp) The unit for measuring rate of �ow of electrical current: Current (Amps) = Power (Watts) / Voltage (Volts).
Asymmetric Light Distribution Where the distribution of light from a luminaire is not even in one plane. Common in display luminaires such as ‘wall washers’ where light is directed intentionally in one direction.
Azimuth The ‘swivel’ angle, as used in �oodlighting or display lighting designs and installations.
Ballast Lumen Factor (BLF) The proportion of light emitted by a luminaire when in emergency mode, usually powered by batteries, compared to the normal mains powered output. BLF �gures can be <10% or 0.1 as emergency lighting levels are far lower than those required for normal lighting.
Beam AngleNot, as commonly thought, the width or angle of light emitted from the lamp/luminaire. Instead, the point where intensity reaches 50% of the peak value.
Binning The method used for sorting LED chips during manufacture, typically based on output and colour temperature. The latest manufacturing techniques employed by leading chip manufacturers are yielding chips that no longer require binning as the consistency and tolerance is greatly improved.
Brightness Whilst brightness is what people see and react to, luminance is the actual surface brightness of an object and is measured in candelas per metre 2.
Bathroom zonesBathroom lighting needs to be functional and safe. It is divided into zones where only suitable light �ttings should be used.
Zone 0 is inside the bath or shower. Any �tting used in this zone must be low voltage, (max 12v) and rated at least IP67 which is immersion proof.
Zone 1 is the area above the bath to a height of 2.25m from �oor. In this zone a minimum rating of IP65 is required.
Zone 2 is the area stretching 0.6m outside the perimeter of the bath and the area between zone 1 and the ceiling upto 3m. Also the area around the wash basin, within a 60cm radius of any tap. In this zone a minimum rating of IP44 is required.
Bayonet Cap (BC)A common lamp cap found on many lamps in domestic use in the UK. The lamp cap has two small pins that protrude from the base, these are inserted into the lamp holder and lock the lamp in place as it is rotated. B15 and B22 are the most common types.
B15d B22d
Glossary of terms
www.egglighting.com
ZONE2
ZONE2
ZONE2
ZONE1
ZONE2
ZONE2
ZONE2
ZONE2ZONE
1
ZONE2
ZONE2
BEAM ANGLE
36˚
64
Glossary of term
s
British Building Regulations Various building regulations, usually referred to as the approved regulation document letter, exist not only to ensure that buildings are constructed safely but also that materials or equipment installed is of the current requirement. Various products comply with:
• Document B - Fire Safety
• Document C - Resistance to contaminants and moisture
• Document E - Resistance to sound
• Document L - Conservation of fuel and power
British Standards Institute (BSI) The national standards organisation is responsible for publication of standards that ensure products are constructed and operated safely and e�ciently. Standards are pre�xed with BS for a British Standard, EN for a European Standard and BS EN where the European Standard has been adopted as a British Standard. All BG Electrical products are conceived and produced to comply with the relevant standards, key standards for the LED range include:
• EN 60598-1 - Luminaires - General requirements
• EN 55015 - Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
• EN 61547 - Equipment for general lighting purposes - EMC immunity requirements
• EN 61000-3-2 - Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for Harmonic current emissions
• EN 62471 - Photobiological safety of lamps and lamp systems
• EN 62560 - Self-ballasted LED-lamps for general lighting services by voltage 50 V. Safety speci�cations
• EN 61347-1 - Lamp control gear - Part 1: General and safety requirements
• 2002/96/EC - Waste Electrical & Electronic Equipment (WEEE)
• 2002/95/EC - Restriction of the use of certain Hazardous Substances in EEE (RoHS)
• (EC) No 1907/2006 - The Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)
Candela (Cd) The SI unit for luminous intensity.
CE The European Community mark ‘Conformité Européenne’ signifying all relevant standards and directives have been complied with.
Chip The LED Chip is the light source.
Chip On Board (COB) Is the latest generation of LED light source. Many small LED chips are incorporated in one packaged light source to provide a more e�cient solution that can be combined with a lens and/or re�ector to maximise the light distribution.
Class I Class one luminaires require an Earth connection for electrical safety.
Class II Class two luminaires do not require an earth connection and are also referred to as double insulated.
Colour Appearance Term used to describe how ‘white’ the emitted light looks. Commonly, warm, neutral, cool and daylight are used to categorise.
Colour Rendering Index (CRI)A measure of the degree of colour shift objects undergo when illuminated by the light source as compared with those same objects when illuminated by a reference source of comparable colour temperature. The reference source has a CRI of 100. Natural light (daylight) would also be 100.
Correlated Colour Temperature (CCT) The description used to describe the e�ect of heating an object until it glows incandescently, the emitted radiation, and apparent colour, changes proportional to the temperature; easily envisioned when considering hot metal in a forge that glows red, then orange, and then white as the temperature increases. Measured in degrees Kelvin.
<3000K Warm white
4000K - 5000K Neutral white
>6000K Cool white
Cut-out dimensionSize of hole required to install luminaire.
Glossary of terms
W
www.egglighting.com
CRI 80>
BUILDING REGULATION COMPLIANT:
PART B
BUILDING REGULATION COMPLIANT:
PART C
BUILDING REGULATION COMPLIANT:
PART E
3000KWARMWHITE
4000KNEUTRALWHITE
6000KCOOL
WHITE
Glossary of term
s
65
Glossary of termsCut O� AngleSmall downlights can appear too intense and very glary, so cut o� angle illustrates the point where the light source can’t be seen.
Corridor Function Refers to luminaires that when not required to emit 100% light output, switch to 10% output. This ‘standby mode’ allows the luminaire to provide a low level of illumination for a feeling of security so the area is not totally dark. Upon sensing movement the output automatically and instantly switches to 100%. This is particularly useful in circulation areas such as corridors and stairwells.
DALI Stands for Digital Addressable Lighting Interface, where each driver and control component such as a sensor or switch has a unique address on the lighting installation. This allows for in�nite con�guration of the lighting installation and �exibility in the future.
Dimming Many Luceco luminaires are available as a dimmable version option. Generally this requires a di�erent driver to the standard �xed output driver and also may require additional wiring on site to operate/control the dimming function.
Direct Lighting Luminous �ux that reaches the working plane without being re�ected from walls/ceiling or within the luminaire itself.
DLOR Downward Light Output Ratio is the percentage of luminous �ux output from the lamp/luminaire that is emitted in the 180˚ angle below horizontal.
Double Insulation Also known as Class II, where two levels of insulation (such as two cable coverings) protect live parts from exposure.
Driver The driver is often the critical component in a LED luminaire or lamp, more so than the LED chip itself. The driver has to be matched to the power requirements of the LED chip and also have quality components. Drivers that use inferior components such as capacitors, will fail before the rated life of the LED chip, reducing the claimed life by as much as 50%.
Edge Lit All LuxPanels are edge lit; this means that the LED chips are positioned vertically around the perimeter of the panel. This provides an excellent uniformly illuminated panel in a �xture as slim as 8mm.
E�cacyIs the measure of how e�cient a lamp or luminaire is. This can be expressed as (source) lumens per watt, which is the normal measure for lamps. Or, as luminaire lumens per circuit watt that is common for luminaires. The �gure for luminaires will also include the LOR of the luminaire in the calculation.
Edison Screw A lamp cap that features a screw thread for a positive �t in the lampholder, common sizes include E15 and E27.
Escape Route Emergency lighting along a route such as a corridor or staircase to enable safe evacuation.
Emergency Lighting Is to allow the safe evacuation of an area in the event of a mains failure. The positioning and number of emergency lighting luminaires is detailed in a British Standard, BS5266. It is vital that emergency lighting is maintained correctly to ensure batteries are conditioned so it operates when required.
F Mark Denotes luminaires that can be mounted on to �ammable surfaces as the heat generated will not cause any combustion. Previously luminaires that were suitable had to be marked, but the most recent standard requires only luminaires that don’t comply to be marked.
Fire Rated Where a luminaire is installed in a �re barrier such as into a ceiling, it must have the same resistance to �re rating as that barrier. For domestic installations there are ratings of 30, 60 and 90mins and each limit must be tested for. A 90min rated product does not automatically comply with 30 or 60mins due to the di�erent ceiling constructions. Non domestic applications usually have a �re resistant barrier such as a concrete slab between �oors. So, do not have the requirement in many cases.
Flux / Luminous Flux Luminous �ux is the measure of the perceived power of light, adjusted to re�ect the varying sensitivity of the human eye to di�erent wavelengths of light and is expressed in Lumens (lm).
Frequency Is the rate that the power supply wavelength �uctuates and is measured in Hertz.
General Lighting Lighting to illuminate the general area without supplementary task lighting.
Glare Is di�culty seeing in the presence of bright light such as direct or re�ected sunlight or arti�cial light and is proportional to the background illuminance, a good example is a car headlight that provides glare at night time but not during the day.
Goniophotometer A photometric device for testing the luminous intensity distribution, e�ciency, and luminous �ux of luminaires.
www.egglighting.com
90minFIRE RATED
E15 E27
66
Glossary of term
s
Glossary of termsHeat Sink A part of the thermal system that conducts or convects heat away from sensitive components, such as LEDs and electronics.
Hertz (Hz) The unit to measure frequency.
High Power LED A high power LED, sometimes referred to as a power LED, is one that is driven at a current of 350mA or higher.
High Risk Area A requirement in Emergency lighting where a process may require safe shut down or an increased hazard. Higher emergency lighting levels are therefore required local to the risk.
Ingress Protection (IP) RatingA system that identi�es the protection that a lamp or luminaire has against solid objects and water. The �rst digit being solid object protection and the second one resistance to water.
IES Illuminating Engineering Society, an American organisation that provides standards and recommendations. Photometric data �les are common in .ies �le format.
IlluminanceThe intensity of light falling on a surface area. If the area is measured in square feet, the unit of illuminance is footcandles (fc). If measured in square meters, the unit of illuminance is lux (lx).
Indirect Lighting Lighting that is re�ected by room surfaces or within the luminaire before falling on to the working area. As a result of re�ection it is often lower in intensity and glare.
Initial Lumens The output up to 100 hours use.
Inrush Current Components such as drivers can have high inrush currents for milliseconds due to the use of capacitors, this should be considered when specifying switching and breaker ratings.
Integrating Sphere A device used for a variety of optical, photometric, or radiometric measurements.
Isolux Diagram A graphical representation of common illuminance levels to show lighting levels over a calculated area.
Junction The point at which the Positive and Negative conductors meet in a LED.
Junction Temperature A critical consideration in LED lamp or luminaire design. For every 10˚C that the junction temperature exceeds the optimum �gure, life of the LED chip is reduced by 50%. Overrunning LEDs by operating at higher amps will cause this to happen.
Kelvin The SI unit used to measure and denote colour temperature, degrees Kelvin.
kWh Kilo-Watt-hour is the typical billing unit for electricity costs and represents 1kW of power over a 1 hour duration.
Lamp A lamp converts electrical power into light and sometimes they are called ‘bulbs’ due to the traditional lamp shape.
LED Rated LifeLED chip �gures are quoted by the chip manufacturer and in some cases these are not translated when the chip is used in a luminaire where it can run hotter. As heat a�ects the LED chip, the life can be reduced dramatically.
www.egglighting.com
IP20RATED
Protection against solid foreign objects
Protection against harmful ingress of water
Ingress Protection (IP)IP Tests IP Test
0 No protection 0 No protection
1
Full penetration of 50mm diameter of sphere not allowed.
Contact with hazardous parts not permitted.
1 Protected against verticallyfalling drops of water.
2
Full penetration of 12.5mm diameter of sphere not allowed.
The jointed test �nger shall have adequate clearance from
hazardous parts.
2
Protected against vertically falling drops of water with
enclosure tilted 15˚ from the vertical.
3The access probe of
2.5mm diameter shallnot penetrate.
3 Protected against sprays to 60˚from the vertical.
4The access probe of1mm diameter shall
not penetrate.4
Protected against water splashed from all directions -
limited ingress permitted.
5 Limited ingress of dustpermitted (no harmful deposit). 5
Protected against low pressure jets of water from all directions
- limited ingress permitted.
6 No ingress of dust. 6
Protected against strong jets of water e.g. for use on ship
decks - limited ingress permitted.
7Protected against the e�ects of
immersion between 150mmand 1m.
8Protected against continuous
submersion at a speci�ed depth.
30,000HOURS
Glossary of term
s
67
Glossary of termsLED Light Emitting Diode. An LED is a solid-state semiconductor device that converts electrical energy directly into light. On its most basic level, the semiconductor is comprised of two regions. The p-region contains positive electrical charges while the n-region contains negative electrical charges. When voltage is applied and current begins to �ow, the electrons move across the n-region into the p-region. The process of an electron moving through the p-n junction releases energy. The dispersion of this energy produces photons with visible wavelengths. Most LEDs emit a blue light as that is the most e�cient format, a phosphor coating turns the blue light into the white light required.
Light Output Ratio (LOR)Light Output Ratio is the percentage di�erence between the luminous �ux emitted by the light source and the amount emitted from the �xture it is housed in.
Llm/W Luminaire lumens per circuit watt is total lumens emitted from the luminaire (source lumens x LOR) / total luminaire wattage including control gear.
Lumens (lm)The international (SI) unit of luminous �ux. Lumens will become the measure of light output as watts can not be a reliable measure due to the di�erent e�cacy of light sources and the ongoing improvement in LED e�cacy through development.
Lumen Depreciation Describes the percentage of light lost relative to the initial lumen output. LEDs depreciate at a far slower rate than other light sources, so a LED with a lower initial output can quickly provide more light than a faster depreciating light source.
Lumen MaintenanceThe luminous �ux at a given time in the life of the LED. This is expressed as a percentage of the initial luminous �ux. This usually determines the rated life of a LED product as the point it should be replaced.
Luminaire A lighting �xture complete with installed lamps or light source.
Luminaire Lumens (Llm)The light emitted from a luminaire will typically di�er from the source lumens. This can be from losses within the luminaire housing. Also it is common for LED’s to operate at a higher temperature in the luminaire, this can lead to the output increasing when compared to the source (chip) lumens. Luminaire lumens will be Source lumens x LOR.
Luminaire Wattage Is the total of the LED and any control gear included.
LuminanceThe surface brightness of an object and measured in candelas/m 2.
Luminous E�ciency The percentage of total lamp lumens that a lighting �xture, luminaire, or system emits, minus any blocked or wasted light.
Lux (lx) The SI (International) unit of illuminance, or luminous �ux incident on a unit area, frequently de�ned as one lumen per square metre (lm/m 2).
Maintained EmergencyA Maintained emergency luminaire is able to be used for both general and emergency lighting, a second live cable allows it to be turned on/o� as required and detect a mains power circuit failure.
Microwave Sensor The sensor emits low power microwaves that form a pattern in the area covered. When movement disturbs the pattern, movement is detected and the sensor turns the light source on. microwave sensors are only recommended for indoor use as they are sensitive to movement and not heat.
Non-Maintained Emergency A Non-Maintained emergency luminaire ONLY operates in emergency mode and is not for general lighting.
Open AreaLighting also called ‘anti-panic’ area lighting is emergency lighting where not a high risk area or escape route.
Organic Light-emitting Diodes (OLED) Organic light-emitting diodes (OLEDs) are based on organic (carbon based) materials. In contrast to LEDs, which are small point sources, OLEDs are made in sheets which provide a di�use area light source. OLED technology is developing rapidly and is increasingly used in display applications such as mobile phones and PDA screens. However, OLEDs are still some years away from becoming a practical general illumination source.
PIR Passive Infra Red sensors detect movement by the change in background temperature as body heat moves into the area.
Phosphor A coating of phosphorescent material which photons from a royal blue LED pass through causing those photons to exit with a di�erent colour property.
Photometric Data Is a generic term for light output and distribution data for a lamp or luminaire and can be shown in many formats. Generally data is produced following the IES or ELUMDAT method to provide a .ies or .ldt computer �le for use in a lighting design program such as Relux or Dialux. Photometric data is available for a wide selection of Luceco luminaires from our website.
Power Factor The active power divided by the apparent power (i.e., product of the rms input voltage and rms input current of a driver).
www.egglighting.com
2800LUMINAIRELUMENS
68
Glossary of term
s
75Llm/W
Glossary of termsPower Factor Correction In an electronic device, such as an LED lighting �xture, a system of inductors, capacitors, or voltage converters to adjust the power factor of electronic devices toward the ideal power factor of 1.0.
REACH Registration, Evaluation, Authorisation & restriction of Chemicals. The EU Directive covering the use of hazardous chemicals used in the manufacturing process and supply of products.
Remote LED DriverSome LED lights in our range use a remote plug and play LED Driver, that o�ers �exibility to select either a �xed output, dimmable driver or emergency versions, with all being interchangeable.
Remote Phosphor A phosphor conversion technique in which photons from a royal blue LED pass through a phosphor material that is not attached to the LED chip.
RoHS Restriction of Hazardous Substances (2002/95/EC) is an article 95 directive, meaning it is across all European Union member states. Since July 1st 2006 the use of hazardous substances is restricted in products, to prevent environmental harm. The prohibited substances are Lead, Mercury, Cadmium, Hexavalent Chromium, Polybrominated Biphenyls and Polybrominated Diphenyl Ethers. All relevant Luceco products comply.
Self-Contained The most common type of Emergency lighting luminaire, where all of the components are within one Emergency luminaire. This can include gear boxes connected directly to individual luminaires but outside the main luminaire housing. If within 1m, it is classed as self-contained.
SMDs Surface-mount LEDs.
Source Lumens (lm)Source or Chip lumens is the output of the LED array and does not allow for any reduction or increase from the luminaire.
Source WattageAlso could be referred to as chip wattage is for the LED only and does not include any control gear.
Task lighting Localised lighting intended for a speci�c task.
Thermal management Controlling the operating temperature of the product through design, examples include heat sinks and improved air�ow.
Tp(a)Fire Retardant Thermoplastic. Di�users used on Emergency lighting luminaires and also certain applications where the percentage of di�users against the ceiling surface area is calculated must be of Tp(a) material.
ULOR Upward Light Output Ratio, the percentage of light emitted from a lamp or luminaire above the horizontal plane.
Utilisation Factor In lighting design, the proportion of the luminous �ux emitted by a light source, which reaches the working plane.
Ultraviolet (UV) Electromagnetic radiation with wavelength shorter than that of visible light. LEDs emit minimal UV and therefore do not attract insects or potentially damage sensitive materials illuminated by them.
Voltage The term used to describe the electrical potential di�erence between oppositely charged conductors.
WattageThe power consumed by the LED.
www.egglighting.com
5WLED
Glossary of term
s
69
www.egglighting.com
from
UK Sales &Distribution Centre
Suite 3/6111 Union Street
GlasgowScotlandG1 3TA
Tel: 0141 416 2624Email: [email protected]
TreeGreen