Envir CATAloGuE - Gough Plastics - Enviro Catalogue 09... · Rule In-line Fans are now available...

Gough Plastics, the environmentally

friendly solution.AS1546 Lic. 21477

SAI GlobalCaring for the planet and its people with a passion

Envir CATAloGuE

DUmP-Ezy

TRAILPAD

HTS AND COASTLINE

POLy GABION

HTS AND EASTBROOk

TRACkPAD

SEPTEmBER 2015

GOUGH PLASTICS ENVIRO CATALOGUE2

BenefitsThe MicroFlush pedestal uses only 300mls of •water per flushing operation.The NonFlush pedestal uses no water at all.•Delivers extremely high quality effluent.•Is capable of coping with over 100% overload •situations (max 1 week).Can be installed in existing or new buildings that •are not able to be connected to a sewer system.

How does it work?The waste enters the primary tank, which is filled •with water, where it is acted upon by bacteria and broken down to 5% of its original mass. Via displacement, the clarified effluent then •travels to the secondary treatment unit. On completion of treatment (approx 120 days), the effluent is then dispersed to ground via a gravel bed or to other options.

maintainenceThe primary tank should only require sludge pump-•out every 4-6 years, dependent upon usage. No need for chemicals, only water or Nu-Klean needs •to be used to clean the pedestal. BioMagic can be added to the primary tank to inoculate the system.

RetrofitsCustom-made to suit your current structure.•Designed to extend the life of your •existing building.Designed to replace your old overloaded onsite •waste system.Upgrade to a MicroFlush or NonFlush Hybrid •System with your current building.All the benifits of the HTS without the cost of a •new building.

InstallationThe Hybrid Toilet System must be installed in •accordance with the appropriate Australian Standards and local regulations. Please seek guidance from your local regulatory body.

WarrantyThe Hybrid Toilet System is covered by a full •manufacturer’s warranty.The electrical items are covered by a 6 month •warranty and there is a 5 year warranty on the materials and workmanship.The warranty is limited to the use of the •system under normal operating conditions and commences on the date of purchase.

50 PERSON 100 PERSON RETROFITS

Caring for people and the planet with a passion

Hybrid Toilet System

GOUGH PLASTICS ENVIRO CATALOGUE 3

Custom-building Hybrid Toilet Systems to suit your existing structures and site-specific needs

Custom System Design Designed to replace your old overloaded system.•Designed to extend the life of your •existing building.Custom-made to suit your current structure.•Upgrade to MicroFlush or NonFlush.•All the benefits of the Hybrid Toilet System •without the cost of a new building.

Retro-fit in Progress

Custom-made TanksTo quote we need:

Usage numbers.•Under building dimensions.•Photographs of site, building and under floor •work area.

Contact your agent for a detailed customer inquiry form.

HTS retrofits


HTS retrofits

Reduced maintenance for Hybrid Toilet System

Auto Inoculation UnitThe bulk reservoir removes the requirement of •frequent manual inoculation.Matches inoculation relative to usage rate.•Assists odour control.•Improved waste digestion.•Fits all exsisting MicroFlush systems•

Anti-vandal Hand PumpsImproved handle and housing design to prevent •damage to pump.Heavy-duty wall mounting.•Easy pump access for service.•

Protect your InvestmentSite-based maintenance programs.•Trained Hybrid Toilet System technicians.•

Ask us for more details.

mcVent Powered Rotary Ventilator

Replaces inline fan (no more inline fan to clean).•Less maintenance.•Intelligent energy use (as wind speed rises, •power requirements diminish).Wire into existing power supply.•2 year warranty.•Motor remote from airflow.•

Cistern Tank

Foot Pump

Stainless Steel Handle

Hand Pump

Housing

Heavy-duty Stainless Steel Mounting Bracket

Inoculum Bulk Reservoir

Inoculum Delivery Line


Features and BenefitsGround level installation - great for WH&S•Kit includes 2 x Fernco Couplings for easy •installation and removalFans are available in both 12 and 24 volt•Power consumption is 4 AMP when the flow •rate is 235 CFM at open flowIncludes low voltage cut-off switch and a •timer so fans operate only during peak timesWith a vent cowl at the top, it is an effective •and efficient solution

Rule In-line Fans are now available from Gough Plastics

rule in-line Fan

BioMagic

Super 500BioMagic treats the cause instead of the symptom. It is a practical and economical way of supplying oxygen and nutrients in a hydrated form, which allows the facultative bacteria to quickly become and remain aerobic, effectively eliminating sulfide production and actually preventing odours from being produced. For neutralising biomass, BioMagic acts the same as Mother Nature’s bio-cycle, only hyper-accelerated. It is non-hazardous, non-volatile, pH neutral, long lasting and 100% biodegradable and environmentally sustainable. Available in sizes 5L, 10L, 20L, 200L and 1200L.

Nu-kleanBioMagic’s Nu-Klean is a fully concentrated, multi-purpose cleaner that can be used on all washable surfaces. It is 100% environmentally sustainable and can be easily diluted for a large range of applications. Nu-Klean is very effective and leaves no residue. It does not bleach or cause damage to surfaces. It is especially formulated to be used on modern plastic, Perspex and fibreglass.

These products are also available from 1800 888 205 www.biomagic.com.au

Gough Plastics Recommends Biomagic


HTS & Dropper Tube

After years of observation and in-field testing, we have designed a superior, more functional pedestal with the following features:

Absolute minimum surface contact area which •greatly reduces soiling.A more appealing bowl shape which provides •more than sufficient room to avoid contact with the bowl surface.A hole size which allows only smaller objects to •pass through and provides a practical balance between safety, aesthetics and function.

The Dropper TubeThe dropper tube is an integral component of the system and performs a number of functions:

Directs waste into the primary tank.•Isolates waste from any possible contact.•Requires no maintenance and limited cleaning.•Forms the first part of the venting system.•The recess in the front of the tube and the •bottom flap both act as an anti-splash device and aid in the overall aesthetics. They provide a dark tube which limits light entry into the primary tank and also blocks the view of the waste below.

Septic Tanks provide an onsite sewage disposal system for homes on the urban fringe and in rural or remote locations. Effluent flows from the toilet, bathroom, laundry and kitchen into a tank, where liquids, fats, oils and solids are separated. Bacteria in the septic tank consumes the effluent, and leaves behind a liquid which flows on to an evapotranspiration field. The liquid is safely evaporated by wind and sun or transpired through plants.

Reln’s complete range of purpose designed black water tanks take quality and flexibility to the next level, with:

Unique stepped ribs •for greater strengthA reinforced •structural brace ring to prevent crushingA riser that provides •greater flexibility for installationA 4,000L Septic and •Holding Tank for increased capacity15 Year Warranty•

reln Septic & Holding Tanks


Grey Water Transfer Tanks

OUTLET: 50mm

OUTLET: 50mmINLET: 110mm

OVERFLOW: 56mm OVERFLOW:

56mm

INLET: 110mm

All Grey Water Tanks include: Davey D15VA pump hold down plates at base

600L Grey Water TankDiameter: 944mm, Height: 1300mm

50mm outlet standard at 1150mm from base (customisable)•110mm inlet standard at 725mm from base (customisable)•

Part Number FENV900.0100

200L Grey Water TankDiameter: 600mm, Height: 945mm

50mm outlet standard at 777mm from base (customisable)•110mm inlet standard at 410mm from base (customisable)•

Part Number FENV900.0200

Drip Line (under mulch)

Grease Trap

Grey Water Tank

Grey Water Transfer Tanks(Example use only)

Shower, Basin or Washing Machine


The first stop for all portapotties!

The Dump-Ezy dump point is the entry point for all grey water portapotty and mobile toilet waste entering the waste treatment system.

It is designed to be easily identifiable, attractive and user-friendly, with simple to follow instructions.

This easy to install, innovative product includes built-in simple and effective operational signage.

The lid is lockable and strong yet light-weight and includes a moulded-in handle and a rubber seal.

The unit is manufactured from tough, UV-stabilised, non-corroding polyethylene.

Design Registration No. 153860

Note: The Dump-Ezy unit is not a treatment system. It is only the front end of a process and needs to be installed in front of an appropriate holding tank, septic tank or sewer line.

It can be installed on top of a floor or cast into a concrete slab.

The unit allows for direct discharge to sewer and/or to a holding tank.

Setting the standard in user-friendly dump points

Photos courtesy of Coral Coast Tourist Park.

Gough Plastics would like to thank the Campervan & motorhome Club of Australia for their invaluable

help in the development of this product.ATS5200.482

Certificate Number WMKT21102

SAI Global

Typical installationPhoto courtesy of

Coral Coast Tourist Park

Dump-Ezy


The first step in easy waste management!

Site LocationWhen selecting a site to install the Dump-Ezy, consideration should be given to traffic in and around the area. Dump-Ezy should be installed away from high traffic areas to ensure user safety. Consideration should be given to any nearby features such as toilet blocks, tables, play grounds etc. Side access roads and isolated pull-over bays are ideal.

BarriersPhysical barriers, such as concrete curbing, metal railings, treated pine stumps etc., can help prevent vehicles from coming in contact with the Dump-Ezy. These should be positioned in a way that still allow clear access for persons and hoses/cartridges.

Hose Wash DownA tap and hose should be provided next to installations to enable wash down with each use. This ensures a clean unit is maintained.

DrainageAdequate drainage should be provided in and around the Dump-Ezy to prevent infiltration from high rainfall, runoff etc.

SignageAdequate signage should also be installed to make people visibly aware of the Dump-Ezy. Ask your local agent how to obtain these.

3,000L Holding Tank OptionComes pre-plumbed direct to holding tank

for immediate installation.

Stainless Steel Sump PanAvailable as a retrofit to existing units. Improves drainage where wash-down

water is unavailable.

Dump-Ezy


Tough, effective, reliable!The TrackPad is primarily a modular roadway system that supports vehicular traffic in difficult to access, easily damaged, fragile terrain. Other applications are limited only by your imagination.

System PurposeTrackPad’s primary purpose is to provide vehicle access whilst protecting the natural environment.

TrackPad Assembly and InstallationTrackPad can be primarily pre-assembled in factory for rapid on-site installation. Once positioned, it is virtually out of sight and immediately operational. It is designed around current WPH&S manual handling requirements, allowing for significant reduction in machinery costs.

Ground StabilisationThis innovative product promotes root growth and minimises erosion whilst creating an interlinked matrix of panels able to support everything from small vehicles to heavily laden trucks and buses.

manufactureThe panels are manufactured from a blend of virgin and recycled, tough UV-stabilised, non-corroding polyethylene by the roto-moulding process.

Panels, connector plates and the locking pins are all plastic, insuring a corrosion-free system.

The panels are hollow-moulded, structured modules, produced using the roto-moulding process.

Ground Stabilisation Traction System

Harpers Hill Moreton Island

TrackPad

Before Back-fill Before Back-fill


Design FeaturesThe design incorporates a large number of 1. holes penetrating the panels linking the top and bottom surfaces.

These holes are orientated in such a way as to 2. create a grid pattern on the surface to deliver a substantial structural load bearing ability as well as allowing the vehicle tyre to engage the panel’s surface.

The holes allow rainfall to soak through them 3. over the majority of the surface. As rainfall exceeds absorption and begins to flow on the surface, the holes in the panels function as multiple silt and water traps, limiting erosion. The holes also trap the sand or soil material together, creating significant structural strength

as well as encouraging plant root growth in and around the panel, further stabilising the system.

The panel surface has grip lugs incorporated 4. for better traction and to trap and retain some level of soil material on the track surface. This significant feature allows for the panels to be camouflaged by the natural ground material.

The slots in the linking plates allow for the 5. creation of curved radiuses. Up to 15 degrees change in angle is possible in the horizontal plain at each panel’s connection point. These two features allow for high degree of flexibility in road alignment.

Two different specifications are on offer, 6. extreme heavy duty applications and standard applications. Consult Gough Plastics for recommendation on the appropriate specification level for the application.

InstallationOnce the site is levelled, simply lay the panels into position by hand and interconnect using the locking pins and linking plates. The product is designed to integrate into the base material in which the panels are installed. The surface of the track is to be excavated to approximately 100mm. The panels are then simply laid into this area and then back-filled with the fill material. This locks the entire matrix into position and is ready for use.

Heavy Duty TrackPad:Weight - 30kgs1. 75% Virgin, 25% Recycled2. Injection Moulded Pins3. HDPE Joiner Plates4.

Dimensions:Length 1650mmWidth 817mmDepth 103mm

TrackPad


A modular, interlinking panel system, specifically designed for walking trails

Benefits of TrailPad:Available in 100% Recycled Black, Birch Grey •or can be colour matched to suit siteBarefoot friendly•Lightweight and easy to work with•Unidirectional•Armours trails to minimise erosion•Preserves natural settings•

Before Installation During Installation After Installation

The panel system is installed just under the ground surface providing a firm underfoot feeling and maximum grip without the visual impact of a fully exposed track product. The product can be colour matched to the natural surrounds.

A critical feature is that in combination with the holes, the grip lugs trap and retain material on the top surface ensuring the product remains covered, reducing dramatically the visual impact on the environment.

The interconnected panel system delivers exceptional strength yet allows sufficient flexibility to follow the natural terrain.

The hexagonal design allows for almost infinite directional changes so the track can follow the natural flow of the land. Panels can be cut with either hand or power tools for neat fitting around natural features and edge filling if required.

EFFECTIVE PANEL SIzE

Designed for pedestrian use only. Not intended for vehicular traffic.

TrailPad

Before Back-fill


A new generation in surface stabilisation and erosion control grids

Gough Plastics is your North Queensland supplier of Diamond Grid. Diamond Grid is the perfect solution for landscaping and domestic areas such as driveways, paths and embankments.

The unique design of Diamond Grids allows you to build attractive driveways with decorative pebbles by stabilizing the fill so that is does not migrate

even in areas subject to constant traffic or repeat wheel tracking and turning. Diamond Grids are also effective in ensuring that different fills do not mix together, erode or wash away.

Diamond Grids are easily laid without formwork, and do not crack or separate like concrete or paving over time.

Diamond Grid

Diamond Grid Installation Step 1





Poly Gabion

Benefits of Poly Gabion

Speed of installation, •e.g. 11 metres per day for a two lane river crossing.

Decreased labour requirements •for men and plant.

Ability to use local materials to •fill the Gabion. No carting of rock over long distances.

Use in conjunction with TrackPad, •concrete culverts, headstocks and other road surfaces.

Optional use of recycled material.•

180m River Crossing 400m River Crossing

Crossing Barriers with Ease


Poly Gabion

1500mmHeightx2500mmLengthx950mmWidth•190kgTareWeight•2.5TBallastWeight

Other Possibilities

POLY GABION MATERIALRETAINMENT SYSTEM

TRACKPADRESTRAININGPANELS

LOCAL MATERIAL FOR FILL

Marine Park Buoys

Fender materialFenders help to prevent damage to boats, vessels and berthing structures. An Ultra High Molecular Weight Polyethylene (UHMWPE) sheet is used for its superior performance in this application. UHMWPE has excellent impact strength, resistance to chemicals and abrasion, plus great durability to last through the toughest conditions.

BuoysMade with bright colours so they can be easily seen in the water, the versatile buoy is used for public moorings throughout Marine Parks in Queensland and NSW.

All tanks made from food grade polyethylene - no taste, no smell. Dimensions may vary by plus or minus 2.5% due to the rotational moulding process. GP4704

CALL 1800 069 805833 Ingham Rd, Bohle TOWNSVILLE

Ph: (07) 4758 6400Fax: (07) 4774 7608

[email protected]

For more information about these great products:

Caring for the planet and its people with a passion

Tuff-A-Gear

T1200 Lowline (158L)Overall Dimensions (mm):

1200 x 550 x 410Internal Dimensions (mm):

1085 x 450 x 325FBOX804.1200L

T900 Highline (190L)Overall Dimensions (mm):


775 x 450 x 455FBOX804.9000H

T450 (64L)Overall Dimensions (mm):


385 x 385 x 430FBOX802.6400

1000L Cube (1000L)Overall Dimensions (mm):

Top - 1150 x 1054 x 1215Internal Dimensions (mm):

1020 x 1020 x 940FMAM300.1000

T1200 Highline (260L)Overall Dimensions (mm):


1075 x 450 x 455FBOX804.1200H

T900 Lowline (110L)Overall Dimensions (mm):


785 x 455 x 325FBOX804.9000L

Cabin-Box (100L)Overall Dimensions (mm):


1430 x 240 x 310FBOX804.0175

30L Underbody Toolbox40L Underbody Toolbox24L Underbody Toolbox

Length: 580mmWidth: 210mmHeight: 420mmFBOX406.3001 (Black)FBOX406.3002 (Grey)

Length: 425mmWidth: 205mmHeight: 309mmFBOX406.2400


25L Handwash Water Tank



27L Underbody Water Tank

30L Checkerplate Water Tank

Length: 440mmWidth: 260mmHeight: 400mmFBOX401.2700 (HD)FBOX402.2705 (STD)

Length: 580mmWidth: 210mmHeight: 420mmFBOX401.3001 (Black)FBOX401.3002 (Grey)

40L Underbody Water Tank 70L Slimline Water Tank



24L Underbody Water Tank

Envir CATAloGuE - Gough Plastics - Enviro Catalogue 09... · Rule In-line Fans are now available...

Documents

Transcript of Envir CATAloGuE - Gough Plastics - Enviro Catalogue 09... · Rule In-line Fans are now available...