Enhance your own design - Noritake Itron · Enhance your own design Glass Capacitive Type Touch...
Transcript of Enhance your own design - Noritake Itron · Enhance your own design Glass Capacitive Type Touch...
Enhance yourown design
Glass Capacitive TypeTouch Switch Module
Make a difference to your Touch Switch by designing a precise pattern that achieves a high gloss metal l ic finish on a clear glass front panel. This will enhance t he you r p r o d u c t g i v i n g a u n i q u e l u x u r i o u s appearance.
The flat glass surface can eas i l y be kept clear of heavy dirt by simply wiping clean with a soft cloth and g l a s s c l e a n e r detergent.
Longevitylonger Operating life
Cleaneasy cleaning surface
Beauty not like any other
T h e h a r d g l a s s surface protects the display pattern from aging and wear and t e a r . T h e T o u c h Switch’ s circuit and display pattern are photo-etched on the back side of the glass panel.
(((FPC
Switch & display pattern
Glass
LEDPCB
Configuration image
Capacitivesensing
Custom design exampleSemi-custom example
Design your own unique switch panel.Create your own bold design giving a high gloss metallic* finish which is photo-etched directly on to a clear glass panel.The hard wearing finish gives a long operating life without risk of degradation to the display pattern due to mechanical wear.* Photo-etched aluminum thin film
http://www.noritake-itron.comNL-313_04ED ‘14.01
Semi-custom module outline
PCBBase model Glass panel
Type AType BType C
112.0 x 51.0
112.0 x 64.0
154.0 x 51.0
98.0 x 49.0
98.0 x 63.0
152.0 x 36.7
Power supplyInterface
Function
5V / 35mA (TYP.)
Open drain type digital output for switch status
LED control input
Async. serial to communicate
with the controller
Touch-Switch status read out
Touch-Switch calibration
LED illumination control
Boot(up) setting change
SW1 SW2 SWn
Touch switch panel
・・・・
・・・・LED
Controller
Firmware
Parametersetting
Memory switch
SW1SW2…SWn
RXDTXD
LED1LED2…LEDn
VCCGND
JP1…JPn
Internal logic
GND
I/F circuit…
…
Switch's digitalstatus output
Jumper setting
Async. serialinterface
LED illuminationcontrol input
LED driver (circuit)
Refer to the specification for the connection example.
Touch Switch background is available in the following finishes: reflective (mirror), gold, black, white, and transparent.Please ask us for other options like signal interface, daughter board, and Touch Switch glass only.
Common specification
Outline size Block diagram
[CAUTION] Do not apply strong force or impact(shock) to the touch switch. The touch switch is made by glass substrate so you may have a risk of injury from the damaged glass. [NOTE] The contents in this document are subject to change without prior notice.
SEMICUSTOMMODULES
Fast and easy solution with Semi-custom Touch Switch modules
Design your own Touch Switch with the following finishes
Type A(5 switches)
Type B(2x3 matrix switches)
Type C(5 switches)
Glass outline
User definable area
Pattern printable area
FPC cable connection
Black mirror windowand Display module
Highlighted Company Logo
Slider switch
CUSTOMDESIGN
Flashing icon
Custom design examples
Half mirror windowand Display module
half mirror touch switchwith LED illumination
Design examplesThe following base models are available and user definable area is highlighted in pink.
(Unit: mm)
Kurhessenstr3,64546 Moerfelden WalldorfGermanyTel : +49 (0)6105 2092 26Email: [email protected]
Bahnhofstr.4b85386 EchingGermanyTel : +49 (0)89 321 429 20Email: [email protected]
Main office
Vantage HouseHarfrey's Road Great YarmouthNR31 0LS, UKTel : +44 (0)1493 601144Email: [email protected]
Itron (U.K.) LimitedGermany and Austria U.K. and Ireland, Italy, Spain, Portugal, Scandinavia
700 Aza-wada, Ueno-cyo, Ise, Mie, JapanNoritake Itron Corp.
CONTACT
Noritake Europa GmbH (Frankfurt office) Noritake Europa GmbH (Munich office)